LG HBS730 TONE +: the Volume is too loud

Similar Questions

• The volume is too low on my Satellite L20

  First of all sorry for my bad English...

  I just bought a Satellite L20 and I am very disappointed by the volume of the speakers... I read several other post with people complaining of the same issue.
  It is almost impossible to watch a movie being able to catch all the words! The problem remains when you connect earphones.
  I already checked that al volumes are at the maximum level (Control Panel, hardware, player windows media, powerdvd etc.).
  I am very angry with this as I often watch movies and listen to music, but the volume is really low...
  Is there something to do?

  [Edited by: admin]

  Hi arch

  My colleague has Satellite Pro L20 (same as Satellite L20). I saw this camera and the sound quality is not the best. I agree with you that the sound is not loud, especially in writing, because the hands cover the speakers.

  If you check other notebook series speakers are, as a rule, placed close to the screen. In my opinion, it is much better solution. In any case the Satellite L20 is unit low budget and the focus was not multimedia surgraves just. So that the camera is very good and the price is right.

  Personally, I want to have the multimedia unit, but these units are much more expensive. Unfortunately, you have to live with it. In any case, I hope that you will reach all day on your device and there is no other serious problems.

  Good luck!

• How to install old firmware? The volume is too low!

  I bought a rocket about 2 months ago, very happy with it when I bought it. He had the Firmware 1.00000000000000001 or something on it (an old anyway). I installed the new firmware 1.02.3F.

  The first thing I noticed: volume max came down. MASSIVELY.

  His way now too quiet, too quiet for car trips or train. I don't understand why it is not more discussion about this, its criminal. The EU removed ruin fun for everyone with their legislation deleted.

  Anyway, nobody knows where I could find an old firmware which is not the volume cap and how to install it? I would be a happy Bunny.

  P.S. tell me to buy a better helmet, I already have!

  It is a forum for use by people of all ages. Please do not forget to clean your comments when posting

   

  The Forum Admin

  slotmonsta

  You need not install old Firmware. Simply reset to the factory settings and to set the region at the "rest of the world', then you get a 'volume' option in Control Panel that you can set to high.

• Satellite A300D-17F: film is freezes when the volume is too high

  Hello!

  My problem is all gel sound and the screen.

  Watching a movie and if the volume is high (about 70-100) the film is cold and I get very angry.

  Please help me. What can I do?

  Hello

  > What can I do?
  Perhaps, you should not set the volume to the point go to level 65 or lower ;)

  Have you also tried different players? For example, the VLC Player?
  Is a free tool and it supports and plays most of the files.

  Check it out

• Satellite A200 - 14 d - the internal microphone volume is too low

  Hello, I installed the latest version of bios and drivers, but the problem with the internal mic has not changed: the volume is too low (levels the MAX value)-> unusable.

  And when the AC is plugged in, a heavy background noise appears in the hip or trendy helmet speakers.
  In addition, in the mic plugged in too... :(

  Hello

  I found similar topic where the user called Andrej wrote:

  Try this please:
  1. the right of the mouse, click on its icon in the task bar choose sound option
  2. change in the recording tab
  3. mark the front mic and click Properties
  4. change in the last tab named advanced
  5. in exclusive mode, uncheck the box first one

  Please test now and give me some feedback.

• The volume on my MP3 player is too low after extraction and synchronization with windows media player. What can I do?

  I intend to play my MP3 in my car, but the volume is too low. I tried to adjust the volume on the car radio and the MP3 player, but the volume is still too low. I tore and synchronized through windows media player with MP3 and the speed of transmission of high-quality files. Also I tried to drag and drop in windows Explorer, but once again the volume is still too low.

  I tried also exactly the same with an IPOD shuffle, but again, the volume is too low.

  Try the steps in the article provided

  http://www.ehow.com/how_7464813_increase-DVD-rip-volume.html

• Satellite L50 - A - headset volume is too low

  Windows 64-bit of 8.1

  The volume is too low when using a headset. I tried headphones and two different types of headphones on ear, both with no result. Office volume is set to maximum, as is iTunes and VLC.
  I also DTS enabled, which has stimulated a little volume, but it is still too quiet.

  Google search suggested the so-called "Compensation of volume" (playback devices > properties > improvements > Loudness equalization), which seems to be the generally accepted the problem solution, but that has not helped me at all.

  I am a student in music that makes a fair bit of audio processing for the good sound is important to me and it makes me crazy, does anyone have any suggestions?

  Thank you

  Eh, it's really hard to tell what the problem is here. As far as I know there is not much difference in how he works with internal or connected speakers earphones/headphones.

  I have two Toshiba laptops and there is absolutely no any kind of difference. When I change the sound level, it reacts as usual, regardless if headphones are connected or not.
  When you start some application open the volume mixer and check if the noise level is identical with a sound level for the speaker.

• The volume control on the right side of the bottom bar has disappeared.

  Recently, I was a watch UTube and the sound was too loud. When I went to use the volume control which has always been on the side of the
  the bar lower, it was gone. It could have happened after an automatic update of Windows. The same thing happened on one of my friend
  computers. I am running Vista on a Gateway laptop, but my friend has Windows 7 which should not be the problem. How can I reduce the amount if I can't find the icon and there is its control on the video or for that matter the music I listen to on the Web?

  Right-click on the taskbar, click Properties, notification area and uncheck and then click on the volume control on the bottom.

  hope this helps

• Best way to increase the volume in steps

  Hello

  I have a weird problem with my cell phone, a k800i and the wake-up alarm: I did an analysis with Adobe Audition 3 with a simple tone, and I saw the alarm lasts 60 seconds, no matter how long lasts the mp3 that I use to wake me up. You can see the file attached here.

  In fact, the tone starts with 0 db, improving each seconds 1.79 2.1 DB, in 17 steps, then the db level remains the same until the sound stops. The result is that, as a first step, I can't hear the first few seconds for mp3 selected, and in the last seconds, the volume is too high.

  So I decided to use hearing to prepare some of the best 60 seconds for my favorite songs (I said that it was very very phenomenon).

  But of course, I don't want to do it manually for each file and each step that I'd look like a perfect silent, isn't it? haha!

  You know a procedure to automate this?

  You might think as "Hey, this guy has a lot of time to lose", but believe me, I did not. It's like a strange trial 'scape from the real world "...

  Thanks in advance!

  Roger

  Open and edit the file you want.

  In publishing view, go to Effects > Amplitude and Compression > envelope.

  Creating a volume envelope to the length you want.

  Apply it to your waveform.

  When you are satisfied with the parameters of the envelope, record this as preset volume envelope.

  Simply apply the preset to each desired waveform.

• Satellite R630-155 - fan is too loud and SSD update

  I am the owner of a Toshiba Satellite R630-155 (Core i5-480). My problems are:

  1. the fan is too loud and never stops. In normal operation (navigation and General Office work) there is a constant high pitch noise which is audible three to four meters in a desktop - high load environment, you just can't take it anymore! The fan never stops... even when you do nothing...

  2. the heat is a big problem. The bottom of the laptop is overheated constantly and I have to place on my desk so that the lower left corner is outside the table, so it can breathe fresh air from below - otherwise, the temperature rises and the (noisy) fan is unable to follow. When I work with the laptop sitting on a couch, I place a thick book between the laptop and my legs. The book must be thick (more than one inch) with hard covers, otherwise the heat going through the book!

  3. last (but not least, I will mention the biggest problems here) that's the problem with the installation of the SSD. I bought a used Corsair F80 (80 GB SSD) from a friend, but I was unable to use it with the Toshiba - BIOS not detect the disc. I tried to install all the latest updates for portable and SSDS but I had no success. Then I put the disc and I bought a brand new Zalman 128 GB SSD (SSD0128N1 Sandforce) but I had exactly the same problem. I contacted my local support Toshiba and after much conversation, the only answer I got is that the laptop is not compatible with these SSDS, and it is acceptable by Toshiba and not their problem. They told me that if I need an SSD upgrade I cannot go for the Toshiba SSD that is installed on the portege series, which is sold by Toshiba for a ridiculously expensive price - about $500 for 128 GB. I contacted the European support center and I got the same exact answer. I searched the Internet and found someone else with exactly the same problem with a Corsair 128 GB SSD - he concluded that the laptop detects the SSD after ten to twenty resets. I tried and it was true - after a lot of restarts the detected disk Zalman laptop and I was able to successfully install Windows 7, but the process is unacceptable. Also the drive is rated by the sites official at the speed of an OCZ Vertex 2 128 GB (and a little better), but when I ran a cue point in the Toshiba, the results I got were less than half of the advertised speed. Same reference in another machine of the same disc, resulted in the announced speeds.

  Shame for Toshiba...-beautiful design and portability, but all the rest is a big flaw. Their support in non-existent and they do not appreciate their customers. According to me, they stole my money and I will never buy a Toshiba laptop again.

  Sorry for the big message, but I need, I warn potential customers. Can anyone help me with any of these problems? You also have the same problems?

  To follow...

  Hey Buddy,

  With regard to the issue of fan and the heat: you did it BIOS update? A friend told Satellite R630 too and he told me that the fan with the new BIOS version 2.10 activity is reduced. In addition, the laptop is colder than before so I recommend to install this update. You can download the update of the BIOS here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But before you start the update of the BIOS, you should consider the following tips:
  -Run update as an administrator only
  -Unzip all files from zip archive before launching the update file
  -Close all running programs as the antivirus and firewall
  -Make sure the battery is fully charged

  With regard to the SSD it s still a little complicated to install 3rd party products and no one can guarantee that these parts would not work. You're always on the side safely with original spare parts from Toshiba.

  All you can do is to install the new firmware for SSDS and hope that it works, but who knows maybe the BIOS update will help you also in this case ;)

• Satellite A110-162: how to increase the volume?

  Hello

  I bought a series of satellite A110-162 and was very disappointed by the volume is not loud at all.
  I was wondering if there is anyone out there who has them and has the same problem as me.

  Janette

  Hello Janette

  I hope you checked all sound settings. Please enter the Volume control and wave set at max level. I also recommend you check the Toshiba virtual sound tool. Believe me, this tool is pregnant just preinstalled on units with a good sound card and also quality.

  There you can turn on SRS and also use parameters in detail.

• can I disable the close full screen when the volume control on the volume slider?

  Information system: HP Pavilion dv7-3065-dx Entertainment PC running Windows 7 Home Premium Service Pack 1

  Information problem: whenever I'm viewing in full screen and I change the volume, fullscreen application is minimized and the desktop with pop-up windows volume level indicator

  For example: I watch a video in full screen and decide the volume is too low or high. I use the remote control supplied with the PC or the volume above the keyboard slider. Setting the volume level, the movie gets completely minimized and the desktop. Soon after, the volume level indicator appears on the screen. I then have to click on a program to open, and then press the button full screen again... Is it possible that I can disable the process and adjust volume without changing the display?

  Hello

  The only way to avoid this is to uninstall HP MediaSmart SmartMenu (listed in programs and features) - this is the utility that is responsible for the OSD volume which in turn, reduces to a minimum the current screen.

  Kind regards

  DP - K

• Turn down the volume on the tone and ringing for HP Laserjet Pro M1536dnf

  We recently bought a Laserjet Pro M1536dnf.  I went through all the menus as well as the user's guide.  How do you turn down the volume for outbound faxes?  The tone and the call for ringtone is too loud and disturbing for the workers in the room where the fax.

  Hey Candlmc,

  If you press the key on the front panel of the M1536dnf, then you will be presented with the configuration menu.  Highlight the menu of system configuration and select it.  Scroll down the menu for the Volume settings and select it.

  This is the section that will allow you to change the ring volume and the volume of the phone line.

  Hope this helps,

  Jason

• Too loud SPA112 rearrange tone

  Hello

  After some time, adjust the settings, I have my SPA112 reasonably reliable work with a fax on line 1.

  Only one problem... If you call the fax number real of a phone and then hang up, the SPA (or fax, I'm not sure) give a fast busy signal / your obnoxiously loud reorganize can half of the office here. Any person aware of all of the parameters that could help with this? It doesn't occur when you receive a fax, only when the line is called and then someone hangs up the call. I'm not quite sure if it's the fax or the SPA but the fax does not when connected to a normal analog line.

  480@-19,620@-19;10(.25/.25/1+2)

  Your current tone consists of two basic tones - the first tone is 480Hz to the volume of the - 19dB coupled with your second 620Hz to the volume of the - 19dB. The rate is 0.25 two-tone (1 + 2), followed of 0.25 s of silence. The total length of the tone is of 10 s.

  So the volume of these two volumes. Sorry, I don't remember the authorized the lowest volume. Just try.

• The "iTunes" item cannot be copied because it is too large for the size of the volume

  I am trying to copy my iTunes of 26 GB on a disc (empty) 128 GB flash file. I get the message (above) that the file is too large. Help, please!

  A volume in FAT32 cannot store files of 4 GB or enjoyed, regardless of the amount of free space it is on the disk. Reformat it in exFAT, NTFS or Mac OS extended, as you wish.

  (139802)