LIBEV32.dll is not available

Similar Questions

• When I boot, receive 2 error messages that msprab.dll and uhexofip.dll are not available - how can we get these?

  msprab.dll

  uhexofip.dll

  Receive error messages on startup that these files are missing/unavailable. Tried to go back to the last good configuration, but that did nothing. How can I fix?

  These files were probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove references to the files.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• "dll is not available. Will work without him... »

  Dear MS whistles, gurus and other computer peeps: I got this message when I turned on my computer.  What it means and how to solve the problem.  Please, allow me to inform you that I'm not very good with computers.  Please answer in this regard.  Thank you.

  Have a friend or relative to take your computer to a local store, reputable & independent (i.e., not a BigBox not Geek Squad store or the friend who worked on the computer.). Ask them to format the hard disk and then perform a new installation of Windows.

  Better yet, buy a computer (low-end/cheapo) brand new.

• During the installation of Adobe Photoshop Lightroom 4 research msvr100.dll program that is not available in the files of windows 7. What should do?

  During the installation of the DVD of Adobe Photoshop Lightroom 4 research msvr100.dll program that is not available in my Windows 7 files. What should do?

  Hi Rikk, thank you very much, solution 2 is done. Looking forward to a good weekend and I wish you the same

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• DOWNLOADHOST (MSN3 or 6 or7 > > >) application not available?

  I get a downloadhost (MSN3 or 6 or7...) application is not available when you try to download a file.   Get the same when I try to download a fix.  How should I do?

  Hi, Wayne,

  What fixit did you use?  MSN or Microsoft?

  Could you post a screenshot?

  Order this thread MSN:

  The mailhost file is installed with your MSN software. If this file is missing or damaged, MSN displays the "Mailhost file" message. To allow MSN find the file:

  Click Start and then click Run. - Or - click Start and then click in the start search.

  Type regsvr32 c:\progra~1\msn\msncorefiles\mailui.dll in the text box and press ENTER. I hope this helps.

  Thank you, Sylvain

  http://answers.MSN.com/thread.aspx?ThreadId=f4a233fd-6651-4d1b-acd3-b6ed7025323a&WA=wsignin1.0

  Cooperatiion a little goes a long way.  Please do not duplicate threads.  Be patient and when someone like Yilmaz asked questions is to help you to resolve the issue.

  I have merged the threads.

• Installation/uninstallation of Windows software is not available or is installed incorrectly.

  10 days ago, I had a crash on my computer then download a new antivirus package last of McAfee. I deleted the files altered the antivirus.

  Since my installation/uninstallation of Windows software has stopped working with 'not available message' I use Revo uninstaller, to remove the software from the hard drive and I cannot install the software with the window Setup.

  Does anyone know how to remove a corrupt Windows install and install new software?

  As another consequence of the foregoing, Windows Update does not work all of the updates fail to install on multiplle automatic updates - even after using Microsoft Fixit Center. To try to solve this problem, I uninstalled packages network 4, 3.5 and 3 in reverse order with the intention of re - install. Unfortunately I'm not able to accomplish this task using Windows Update-"all the priority updates are 0 bytes

  All the specific details to remove and re - install the Windows Update software from the hard drive files. I've completed this task a few years ago, following instructions from Microsoft Support, but I do not have that information now.

  All the advice/guidance criicism has accepted with gratitude

  Dave Thomas

  Hi Thomas,

  I suggest you to follow the steps and check if it helps.

  Method 1: Unregister and register the Windows Setup program again

  (a) click Start, run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.

  (b) click Start, click Run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  Method 2: Run check file system (CFS) analyses and checks to see if it helps.

  File system (CFS) Checker

  Note: System File Checker allows an administrator to analyze the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker. If the cache folder is damaged or unusable, you can use the sfc/scannow, sfc /scanonce or commands sfc /scanboot to repair its contents.

  Method 3: Rebuild the windows service install and check if it helps.

  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

  How to back up and restore the registry in Windows

  a. open Notepad.

  b. copy the following into Notepad and save it asreset.regon your desktop.

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

  'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

  00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

  'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" = dword:00000003

  'Type' = dword:00000010

  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

  74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

  00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

  6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

  73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

  00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

  65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

  00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

  00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

  00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

  69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

  66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

  00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

  6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

  47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

  73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

  51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

  00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

  50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

  00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

  76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

  00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

  00.00

  "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

  c. Click Start.

  d. type regedit in the search field and press to enter.

  e. in the registry change windows click onfile and selectimport.

  f. navigate to the location where the reset.reg file and select the file.

  g. click ok on the windows screen once the registry is merged successfully.

  h. restart the computer and check if updates installs.

  Method 4: Download the Windows Installer (. Windows6 0-KB942288-v2-x 86.msu) at the following site.

  Windows install 4.5 Redistributable
   

• Error: ' ATL. DLL was not found"when trying to run any application.

  Original title: ATL. DLL was not found.

  I can't run applications in my pc someone in my house could not get into the computer and changed operating system to windows xp, which allows to be decommissioning of this t. Now, I get this message when I try to run an application: the application failed, because ATL DLL is not found, re - install the applicationmight solve the problem, but I get this message after you have re-installed and I don't know what else to do. Slow computer charges and freezing, something he has never done before. Same IE you have a problem, the only thing that works well, it is the remote assistant who helped me to get here and to him intermet, actually all of this with the dll thing started after I deleted the firefox browser because it froze the computer. Unable to restore my recovery utility, I tried a TI ran and told me it is impossible to get it back before I uninstalled firefox.

  Unfortunately, the support engineer technical 'expert' who is hired by the tips from Microsoft to run sfc/scannow will not help you.

  I would say that, as usual, the technical support engineer has not bothered to reproduce the problem and tried their own suggestion.

  If the atl.dll file is missing, sfc/scannow will launch but it does not work.

  It's just another wild goose chaseSupport Engineer.

  A lot of things will not work if the atl.dll file are missing.  System Restore will not work, Event Viewer do not work, you will not be able to get on the Internet, etc., until the file has been replaced.

  You try to run the system restore, you see the following message is displayed:

  Rstrui.exe - Unable to locate component
  The application has failed to start because ATL DLL not found.  Reinstalling the application may fix this problem.

  Try to open the event viewer, you see a message like this:

  MMC could not create the snap.
  MMC could not create the snap.  The snap-in may not be installed correctly.

  Name: Event Viewer
  CLSID: {975797FC-4E2A-11D0-B702-00C04FD8DBF7}

  Running sfc/scannow will be launched, but it will not run if the ATL DLL file is missing and you will see events like this in the event log (when you arrive, it works again):

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  You can't get on the Internet using any browser.

  You have to somehow replace the missing or damaged file.

  The file might really be missing if he has been quarantined (actually deleted) by your antivirus not specified.  If the file is simply missing, you can just replace it and then later determine what happened to the file and decide what to do about this.

  You can search Windows on your system for ATL DLL and replace the missing file.

  THE ATL. DLL file must be in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Check and see if you can find the ATL DLL file in this folder, or if he's really missing, you will need to replace it:

  Depending on what applications you have installed, when you search for your ATL DLL system, you can find ATL DLL in several places on your system.  You must be sure get you the correct that belongs in c:\windows\system32.

  The most likely place to find a good copy of Atlant. DLL will be in one of these folders:

  c:\Windows\System32\dllcache
  c:\windows\system32\ServicePackFiles\i386

  Locate a copy of the correct Atlant. DLL from the file in one of these folders and copy/paste in the folder c:\windows\system32.

  Answered in the affirmative if invited to replace the existing file.

  There is a copy of the file on my SkyDrive, you can download a system not affiliated and then copy the file to a Flash DRIVE or a floppy disk and apply it on the afflicted system c:\windows\system32 folder.  Here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called atl when the name of the file should really be called atl.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• By selecting USB port is not available in the Installation Wizard of Pinter in XP - 2.

  By selecting USB port is not available in the wizard Installation of Pinter.
  Tried editing the registry and found local-edit string - data value = localspl.dll. "what is normal. Reset once more.
  Resolution not yet found.

  Hello

  1 is your other USB devices work well?
  2. What is the brand and model of the computer?
  3. What is the brand and model of the printer?
  4. who is the Service Pack installed on your computer?

  Method 1:

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

  Note: If you have Service pack 2 on your computer, and then try to install Service pack 3 and check if it helps.

  http://www.Microsoft.com/download/en/details.aspx?ID=10767

  Method 2:

  Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.

  Plug in the removable USB storage device and perform a test to ensure that the problem is solved

  See also:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_c_portsw.mspx?mfr=true

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  http://support.Microsoft.com/kb/282842

• "winhttp.dll" does not work how can I download it? It prevents me from using adobe or yahoo.

  Original title: winhttp.dll does not work how can I down load it

  I have win xp winhttp dll I can't use adobe or yahoo.

  Once more, the response from the Support Engineer with a link to an article that does not help is marked as 'response' by a moderator of the Forum after 6 days of inactivity when it isn't the answer to everything.

  It's a real shame the way things work around here.  If I were Microsoft and "indulged" these technical support engineers who regularly publish responses that are unnecessary and they are marked as 'response', I think that I would call off the coast of the commitment. "

  Usually, it's just not worth reading these Support Engineer 'Answers' as they are not even close.  They are usually just wild goose hunting.

  WinHTTP.dll if missing some things just will not start:

  BITS service (Background Intelligent Transfer Service)
  Automatic update service

  In the Event Viewer system log, you will see tings like this:

  Service
  Cannot start Service on Local computer Background Intelligent Transfer.
  Error: 126: the specified module could not be found
  Event type: error
  Event source: Service Control Manager
  Event category: no
  Event ID: 7023
  Description:
  The Background Intelligent Transfer Service is completed with the following error:
  The specified module could not be found.

  The automatic updates Service hang and displays "Start" in the Services applet:

  Event type: error
  Event source: Service Control Manager
  Event category: no
  Description:
  Automatic Updates service hung on starting.

  CS5ServiceManager Adobe Dreamweaver Service Manager (and perhaps other Adobe startup items) not start and displays error message like this:

  CS5.5ServiceManager.exe - Unable to locate component
  This application has failed to start because WINHTTP.dll was not found.  Reinstalling the application may fix this problem.

  Running sfc/scannow will not replace the winhttp.dll file missing.  I know because I tried.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called winhttp when the name of the file should really be called winhttp.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk

  I am havin problems with my computer, when I start my computer or open a page or try to download anything it comes so far... The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk... I have a lot of problems in trying to solve how to fix this, as I don't know that much about computers. and I don't have the installation disc, I use windows xp I would be great if someone could help me please thank you. Kayleigh lindsay

  It also suggests that you can not run a software antivirus... If this is something you need to heal very quickly.  However, installing an antivirus application - if your PC is already infected - is usually ineffective.

  I suggest you do the following-
  (1) download and run a full scan using the Scanner for Ms.  Available here: http://www.microsoft.com/security/scanner/en-us/default.aspx
  It does not install, is therefore more difficult for malware to block.
  (2) if that was clean, then get an anti-virus in real-time as soon as POSSIBLE.  There are many good choices (Norton, McAfee, etc.) which costs money, and several good without applications, including MS Security Essentials available here: http://windows.microsoft.com/en-US/windows/products/security-essentials
  Note!  If you have another antivirus installed, do not add MSE.  Run two at once is precarious - they will conflict with each other.
  Also, make sure that your windows firewall is turned on, or you have another 3rd party firewall installed.

• How resolve the error that reads "wmvcore2.dll's not found" after the installation of Cool Edit Pro 2.0?

  Hello

  I recently tried to install Cool Edit Pro 2.0 on my Dell laptop. After that it's over, I went to open the application, but the error which read "wmvcore2.dll is not found" message popped up. He suggested I have reinstall the application, so I did, but nothing helped.

  I wonder what I can do to solve this problem and can you give me any help will be greatly appreciated.

  Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  If the above does not help, try to repost in Forum Vista programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.

  original title: C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for pension

  The battery died and when I restarted my computer I started having this error message last week whenever I start my computer. Explorer opens but doesn't load properly, not usable.  Service pack 2 is installed when the first available.
  C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for support
  I tried MS fixit but nothing helped.  Need help.

  Chances are that you see the effects of ongoing hijackware infection!

  • My infected computer - what should I do now?
    https://forums.Malwarebytes.org/index.php?showtopic=9573
  • Help: I got hacked. Now what should I do?
    http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

• I moved my windows mail contacts place and now I can't find them. I get the message the file MSOE. DLL could not be initialized. Windows Mail does not open.

  I was exploring the information about "move your files and user files to another partition" I'm a little short on space.   I chose the location tab in my Contacts Properties window to have a look at the possibilities of some of my folders move to another partition on my computer.   However, I clicked obviously wrong, and now I got a message that the file MSOE. DLL could not be initialized.   I tried the system restore, but no restore points are available to me before today.  Are there jobs that I can do?

  Under your username must be a Contacts folder.   If there is a step, and then either move the new Contacts folder to where he was, or create a new folder under the user name, and then see if it works then.  So if you have a username of 'Heather' contacts should be under C:\Users\Heather\Contacts.  Try and then see if it works very well.  Otherwise, you will need to create a new user and then try to get this to work.

  Steve

• AppleSyncNotifier.exe Unable to locate component. CoreFoundation.dll was not found.

  I get this warning in a pop-up for over 2 weeks now & sent a call for help to fix everything that can happen to cause this.     I heard of anyone.   The current pop-up States that the application has failed to start because CoreFoundation.dll was not found.   As said, it's that Windows would warn me if a solution is available.  Yet, I heard nothing.    Can I remove this foundation.dll core and where it is installed?   I looked in the start menu and introduced computer programs installed but did not see doing anything corefoundation nor I saw AppleSync Notifier.    Does anyone have a suggestion?

  John

  You can try an uninstall of all Apple products and hope that the message will disappear. However, who cannot always help. You may need to reinstall the Apple products such as iTunes, QuickTime and Hello and then uninstall so you receive the error message will disappear.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think