By selecting USB port is not available in the Installation Wizard of Pinter in XP - 2.

Similar Questions

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• USB ports are not available

  My host is a laptop Toshiba with Ws 7. The USB ports are fully operational. However, with the players that they are not. for example, XHDD is not on the desktop "XP".

  What to do so I can make use of the USB ports?

  Hi Redoak716,

  You just need to add a USB controller to the hardware of your virtual machine configuration. Make sure VMware tools are installed and running in the comments.

  Once your virtual machine is in place and your USB drive connected to the host, attach it to the guest using the control panel of devices on the lower right part of the screen of the console. It will be detached from the host that it cannot be used by the two systems at the same time.

  It will be useful.

  Concerning

  Franck

• Re: USB Ports do not work on the old Satellite P10 (PSP10E)

  Searched the forum and noted that it happened a few times, but doesn't really say what happened.

  I updated the bios with bios of this website 2000a.rom. The USB ports have the power because they can charge a bike light usb, but not visible under windows or under several versions of Linux.

  The only other thing that has been said is a new motherboard that is not an option with this laptop as his old enough is, I like to keep because it's a good small portable

  Thank you for your help.

  You have the original recovery disk of Windows XP Home for this old Satellite phone?

• Satellite L855 - 14 p - USB ports do not work after the mode 'sleep'

  Heya guys,

  I have a strange problem today. The 2 USB inputs on the right side of the laptop (idk who is 2.0 or 3.0) does not work with the reason I can not perceive. These 2 guys are on different days, but in the same way. A month ago, I plugged the mouse USB wireless to one of them, then entered mode 'sleep'. When I came back, I discovered the work of mouse aint.

  Then I realized the port I plugged the key USB has no electiricity inside no more. I found it very strange and continuous without using the port of broken, until yesterday. Yesterday, I made the same mistake (a la mode "sleep" in a USB port plugged into the other port - work-) and I have re-opened, the 2nd port is broken in the same way, too. I've mastered Manager devices, regedit, but it has no use. This lead me to think his could be a hardware problem, but how can be possible? Is this a coincidence?

  Now, I have to use my 3rd and last port on the right side of the laptop with a USB duplicator.
  You have any ideas? Can it be a software problem?

  Understand this correctly? The USB ports mentioned don t work even after restarting a new laptop?

  In this case, it could be really a hardware problem
  But before talking about hardware problems, I recommend to recover the laptop using Toshiba recovery.

  Defining the notebook back to factory settings will help you identify the problem: If the USB ports wouldn't work, this s hardware problem.

• How to fix my usb ports? Not correctly recognize the iPod and other devices of storage correctly.

  I had problems with getting my iPod classic 6th generation to be recognized by my computer windows 7.  It works very well but all of a sudden stopped working.  When I connect the iPod, it says on the product than its 'connected' and is in charge, but does not appear on "my computer" or on iTunes.  Now, I supposed that it was a problem with my apple product, but after putting in the store and plug both Mac and PCs, this worked fine, its clear that it is actually a problem with my specific PC.
  All software are up to date and I tried stop and start the unit. (Control Panel > administrative tools > services > device mobile apple).  The PC also recognizes the iPod randomly once in a while and I managed to restore the iPod to factory settings to ensure that there is no problem with the device itself.

  As stated earlier that the iPod is not visible in 'my computer', but when "devices and printers", there are two elements relating to the iPod, appearing almost as if it's two separate devices. the first is "apple ipod usb device" on the devices section and "Apple mobile device USB driver" in the section not specified.  When I click the first device it freezes the computer for awhile.
  I tried to move the ipod to different USB ports that make no difference.  However, when I put in a pen memory USB (TDK 4 GB), it initially also put it in unspecified, but with a yellow warning down logo on the left and when I moved my wireless usb key for my keyboard, it didn't work initially.  These two seem to have resolved themselves in Device Manager...

  In my view, there is a problem with my usb ports grateful drivers. Any idea what I need to do?

  Hello

  Thanks to community Microsoft can help you with your concern for Windows!

  You are facing problems with the USB ports on the computer.

  Method 1:

  Run the troubleshooter of material and check what is happening.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 3:

  You can update the driver from chipset from the web site of the manufacturer and then uninstall and reinstall the device driver updated from the web site of the manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, or you need help on Windows please keep us informed.

  We will be happy to help you!

• USB HDD is not available in the comments (XP)

  USB HDD icon in the 'system tray' merge and hover above him, I get "Disconnect Western Digital hard drive", which is a correct list of the device.  However, I am not able to browse the HARD drive.  Does not appear in the 'readers' work stations.  It is listed in VM settings and the box is checked, as is "enable USB 2.0 support" and "automatically connect USB devices.  I also edited the VMX file to add the following parameters:

  "usb.generic.allowHID ="TRUE"

  usb.generic.allowCCID = "TRUE"
  

  or what improvement in the situation.

  appreciate any help.

  billorr99 wrote:

  USB HDD icon in the 'system tray' merge and hover above him, I get "Disconnect Western Digital hard drive", which is a correct list of the device.

  VMware Fusion does not a "system tray" but the Interface of VMware Fusion has a status bar.  Take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > navigation in VMware Fusion > overview of the Interface of VMware Fusion

  However, I am not able to browse the HARD drive.  Does not appear in the 'readers' work stations.

  There all the devices in the Device Manager Windows and more specifically under Bus USB controllers?

  How is the formatted USB hard drive, FAT32, NTFS, or Apple HFS +?

• Microsoft Publisher 2010 PDFMaker add-in not available with the installation of Acrobat Pro XI

  I have Microsoft Office 2010.  I installed Acrobat Pro XI against the clouds of Adobe.  The PDFMaker Add-in works fine for Microsoft Word, Excel, and PowerPoint.  However, the PDFMaker Add-in does not work for the Publisher. He is absent.  Why?

  Note: The installation of Acrobat Pro XI deleted my install Acrobat X Pro.  Were complements of PDFMaker works fine with X.  Due the fact that X has been removed, I have no fallback option.

  Is it possible that I'm missing a file?

  Location of the folder: C:/Program Files(x86)/Adobe/Acrobat 11.0/PDFMaker/Office

  File display: PDFMOfficeAddin.dll, PDFMWord.dll, PDFMExcel.dll PDFMPowerPoint.dll

  The files is displayed: PDFMPublisher.dll

  No, MS Publisher is no longer supported from the KB document listed below:

  http://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

• HP slate 12 pro: files transferred via a usb port do not appear in the download directory

  I am running windows 8 on an old hp laptop and recently purchased a hp pro slate pro for my partitions.  I plugged my PC using the usb cable.  I created a directory in the download on the slate directory and copied my music files into this directory.   I used to connect to the computer of the PSG.  When you look at the files on the PC, they seem to be in the directory to download on the Tablet, but the download on the Tablet Directory displays no files.  Where are they?  I need help.

  Thanks for your help.  I had downloaded an application called Manager of files, and it's great.  I see all my files.  It can also connect to my pc using the Internet and it is very useful.

• jDeveloper WebService package installed, but the Web Service features are not available in the application wizard

  Hello

  I installed jDeveloper (Studio Edition Version 12.1.3.0.0) and also I installed some packages, for example the Web Service package. But when I create a new application project / I can't select for example of Web Service Client / Proxy and others. See photo:

  

  Do you know why? How can I make available?

  
  THX!

  Milan

  OK, I found it

  I created an application (Custom Java) with the empty project, and then I was able to add the web service client project (right click on the 'project' and select 'of the Gallery"). The same window appears as in my first post, but all features are available

  

  Thank you!

  Milan

• Accerlation GPU not available after the installation of update 2014.2

  Hi all:

  -Pro Pre cc 2014 worked well-

  - then I updated to 2014.2

  and since then the CUDA message not aivailable - software only... (the wording is different, but you know what I mean + it's in German anyway...)

  someone has any idea what could be the problem?

  -Have a NVIDIA GTX 750 M Windows OS 8.1 update yesterday

  Thank you for any assistance.

  At SG soon

  Problem solved:

  I installed the latest nvidia driver and - it works now...

  in any case, the surface of the user is still different, I don't know if this should be an improvement of the update or if it is still a problem with my software...

  brgds

  SG

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• HP 15-r002se: USB port does not

  I have a problem with my laptop [HP 15-r002se] all three 3 usb ports do not work, or even detect that something is plugged, I tried techniques to conquer the problem by the system of formatting and reinstalling windows 8 32-bit where I found myself without success, because I can't able to get compatible drivers of troubleshooting. Then I go to the usb ports even on windows 7 64 bit does not. and finally, format and install windows 10 64-bit, I downloaded the drivers from hp website, but unfortunately when I run the downloaded software sometimes nothing appears either to the pop-up a message on the error or continuation and sometimes it shows this kind of error after it finished extracting

  

  Finally with the help of pilots pack that I managed to install all required drivers but finally arrived with NO SUCCESS, yet neither the operation of the usb port. Here is the screenshot of my device manager.

  

  Please, I seriously need your help to solve this problem, because I am a student, I can afford to buy another laptop earlier

  Hi @Mustapha_Musa,

  I read your message and please try the following steps. A brilliant work has been done by trying these steps. Kudos to you on this point. It's a problem of clear material with the device. The USB ports are defective, the motherboard should be replaced. you will need to contact HP telephone support on this subject for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  The workaround, for now, is the following: If you have a USB port on the device that works, then you could buy a USB port extender and connect it to the port good work.

  Then you connect other devices to the USB port extender. This way multiple devices may still be connected to the computer.

  Just to say thank youPlease click the ' Thumbs Up 'button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Thank you and have a great week ahead.

• Pavilion S5-1204: USB Ports does not: Windows 7 HP Pavilion Slimline

  Hi all

  Yesterday all of a sudden the USB ports are not read.  I have cameras and use a data transfer cable or a card reader to transfer to the office.  Now they do not read.  Tried the front and back of the usb ports.   However, the optical mouse that uses a usb device works.   I don't understand how the mouse works and the purse strings of data transfer and the readers aren't.

  Win 7 64 bit

  HP Pavilion Slimline desktop computer

  Help!

  Update: I did troubleshoot a HP check and update driver.  The screen messages

  USB root hub: this device does not work correctly.

  The current tab:

  Generic USB Hub (6)

  1 port available

  Power required: 0mA

  Solved.

  I've narrowed the problem to the camera. Very strange. The camera will take pictures and display them on the screen. But something is happening internally where the image will not transmit or transfer it via a usb device.

  I have another device with a transfer device and it works. So it seems I have to buy a new digital camera. BTW, it is a Nikon S2800 - not recommended.