Libretto U100 battery - I can remove it in a supply network

Similar Questions

• Libretto U100's VGA cable

  I searched a VGA adapter cable for my Libretto U100 so I can have one on the monitor at home and at work. Unfortunately, I have not been able to locate anyone to sell them, and that they are not listed on the Toshiba site as an accessory.
  Does anyone know if it is possible to buy these cables from anywhere?

  Hello

  Well, as I know the 100U booklet uses a Mini-RGB port to connect an external video monitor.
  Unfortunately, it failed for me to find this cable or adapter. But I recommend you to contact the ASP. I m sure there is a possibility to sell you this part.

  Good bye

• The problem with the battery on the Libretto U100

  Hello.

  The problem is the following: shortly after the start of the loading of the battery starts squeaking (or whistle, subtle signals coming from somewhere inside the laptop or battery) and after a while, stop the load! Windows displays a message, "Battery" unknown, to continue the exercises, you must remove and insert again the battery and so 5 times until the load is complete. And the absence of such an accusation, not more than 1 hour and 45 minutes.

  That's happened?

  Libretto U100

  Capitalist salvation,
  Remember john lennon? "It's easy".

  I think that this little piece of Tech is a bit old...
  and has been used for a period of time to stay...

  the battery disappeared, some cells can't hold not more fresh...
  therefor the voltage misscounted, leads to the "unrecognized".
  We must exchange the battery...

  but no problem for a capitalist you don't ;-)

• How can I configure Libretto U100 internal wifi to connect to Linksys

  I Libretto U100, and I am not able to connect or to search or connect to the WiFi network. I use Linksys Wireless-G (ADSL router modem switch with 4 ports).

  Thank you
  MShamsan

  Sorry to ask, but have you been able to connect any other laptops in this Linksys router? and your laptop sees other wireless devices?

  The booklet is a card WiFi B/G, so there is no reason why it would not connect?

  Is your Linksys in a default configuration? because if it's Setup, with say the hidden SSID and encryption defined, there is no way you will connect to it unless you manually set the booklet.

  More information would be useful

• Libretto U100 - Bluetooth to connect with the new Samsung mobile

  Just bought 2 new machines: GSM Libretto U100, Samsung E720 Bluetooth equipped both. Uploaded everything first the last battery BT (3.2) using the wizard, my phone has been detected correctly and the first time that he asked a key access code, which i left blank. The second time I tried to connect, he asked no more code. The following screens will appear:
  1. the search for BT - Samsung E720 device detected!
  2. now connect to your BT device
  3. the local device connects to the remote service, please wait...
  And now, you can wait for hours because the program has stopped responding.
  My mobile has been configured for detectable and BT has been activated.
  I read the manual of the phone, but these are the only parameters of BT. The other way around, when I leave my phone to a BT device research, he found nothing.

  Thank you very much for making my two toys to talk to eachother!
  Ben.

  Hi Ben

  It's not easy to tell what the problem is but as far as I know, you must set the password for pairing.
  I recommend you to remove the mobile phone the Bluetooth Manager and re - install the mobile phone settings.
  Try to set the password for pairing. In addition, see the following steps:

  1. check if the laptop antenna switch is on.
  2. press the + - key combination to activate the Bluetooth antenna.
  If your laptop is integrated WLAN and Bluetooth.
  3 start the Bluetooth of the TOSHIBA-> folder settings program Bluetooth to turn on the Bluetooth module. Bluetooth works if you see a blue antenna with a bright blue border of the bar on your screen. Also a blue antenna icon with the name Bluetooth information interchange will appear on the desktop.
  4. check that your Bluetooth hardware is properly installed.

  Good bye

• Cards SDHC in Libretto U100

  Hi I have just become the proud owner of a Libretto U100. I have a number of SDHC cards 4 GB/8 GB/16 GB. These do not seem to be recognized by the SD card reader in the U100. I installed Microsoft Hotfix:
  WindowsXP-KB934428-v3 - x 86 and cards have been seen by the U100, but when the card is accessible the U100 freezes and I have to restart. If I leave the card in the U100 boots then to a black screen, requiring a hard reboot with the SD card removed.

  I have installed Windows XP Service Pack 3, but still the same problem occurs. Can it be fixed with a patch software or is the card reader SD of Libretto U100 limited to 2 GB SD cards.

  Thank you very much

  Spymaster

  Hi mate,

  I checked several sites and couldn t find all the bus information that I know, there should be an SDHC controller version 1.2 in this machine (which is very unusual) and I don't know if the controller can manage cards over 2 GB.

  So, I guess the reader can simply handle cards up to 2 GB.

  Welcome them

  P.S.: You can try a BIOS update but I don't know if that would solve anything

• Libretto U100: Light IN DC glow orange

  A few days ago I bought a new Libretto U100, everything works fine without problems.

  But after that the battery has been charged, and I disconnect the computer from the domain controller, I can see the bright orange DC IN system indicator, why?

  The user manual says nothing about all the lights when you are not using the computer?

  Brgds
  Torben

  Hello

  Are you sure that it is a LED 400 p?
  I know that if the output of adapters is abnormal or if power outages, this indicator flashes in orange.

• Qosmio X 300 - what pre-installed software can remove

  I need to know what I can remove it and which must remain about bloatware! I would like to run the least possible, this is used for video and audio live and does not play videos with microsoft media waste!

  I would also like to know why 90% of the time that processor is pegged at 1.5 GHz and not running at 2.4 GHz, appropriately!

  I changed all of the properties that I can find which change cpu clock settings but it still stops back! It's embarrassing as I wanted a portable 1.5GHz, that I bought it for £50!

  Besides the fact that it is slowing down its ok! someone Tosh get in touch as soon as possible!

  I also like a new installation and remove some of the bloatware after execution of a recovery, but at least the additional software can be removed :)

  Everything that is not specific Toshiba can be deleted, such as Google Desktop, Norton/McAfee.

  Look in Control Panel of-> features of the program and remove the software, you don't want to. But do not touch the software that starts with "Toshiba." Toshiba positions are essential for the system and not to "pump up" Windows.

  All CPU Core2Duo have power saving features (speed Stepping) that lower the speed of the CPU when the processor is idle. This saves battery power and keeps the laptop cool and can even extend the life of the CPU. He works automatically up to 2.4 GHz when additional speed is needed. Even desktop PC it these days, there is nothing to worry.

• Should what cable I connect a Libretto U100-105 to a LCD TV?

  Should what cable I connect a Libretto U100-105 to a LCD TV?
  The pc has an external monitor port, but I can't tell what kind of connector, it is, since I have never seen one like this.
  Thank you

  Hello

  It all depends on the available ports.
  To my knowledge the U100 supports a Mini VGA Port and an adapter was supplied with the laptop.
  http://en.Wikipedia.org/wiki/Mini-VGA

  In your case I am looking for a cable that is capable of connecting a mini VGA port with a port VGA (RGB) common, which is probably available on your TV

• Libretto U100 - instructions to upgrade memory required

  Hello

  I have a Libretto U100 with 512 MB of RAM. I would switch to the maximum value allowed.

  Please can you direct me where I can get a diagram and instructions on how to install myself.

  Please can you confirm the part No.

  Thanks & regardss friendly.

  Hello

  Maybe you have an old version of the user manual. So in your case, I would like to download the most recent manual on the Toshiba site:

  http://EU.computers.Toshiba-Europe.com-online downloads support & -online download user manual

  Good bye

• Libretto U100 - SD card reader does not work with XP SP3

  Hi, I recently bought a Libretto U100, and when I put a 2 GB SD card in the locked computer drive, screen froze and had to reboot the system.

  I reinstalled the OS XP pro SP2 recovery disc and SD card reader worked fine. However as soon as I've updated all the software to SP3 the problem comes back.

  All the suggestions/help is appreciated.

  It's strange, but have you tried to update the BIOS? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also make sure you have all the patches and updates for Windows XP is installed. Visit the Windows Update Web site.

• Libretto U100 memory upgrade (2 GB, part II)

  I tried to respond to the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=39592&tstart=0 thread, but it is blocked? Srange.

  I had a glance my U100 Hardware information and there is certainly 1 x 1 GB memory available, so no mem edge.

  Hello

  I found the same info. Libretto U100 has no memory on board and did a RAM slot only.
  This little book can handle with max 1 GB of RAM.
  If you are already using the maximum RAM supported by Libretto U100.

• Libretto U100 2 GB memory upgrade?

  On the librettoworld.com forum (http://forum.librettoworld.com/u-model/maximum-ram-capacity-t31.html) there is a debate as to the maximum capacity of ram of the Libretto U100.

  According to the specifications of the U100, 1 x 1 GB is the maximum. According to intel, the maximum value of the 855GME chipset (http://www.intel.com/Products/Notebook/Chipsets/855GME/855GME-overview.htm) is 2 GB.

  So, can I use a single 2 GB module in my U100, or 2 GB for memory 2 slots or something?

  Hello

  Maybe you need to download the user manual and need to check.

  The user manual says:
  The slot accepts the module of RAM of 256 MB, 512 MB and 1 GB for a maximum of 1280 MB of memory.

  You know that 256 MB of RAM is installed on the motherboard than the internal memory and can not be deleted.
  As a location is available and you can use only one memory card!

  Good bye

• Libretto U100 - modules uncounted after disk upgrade

  Hello

  Please help me find the solution or dedicated instead of U100 service.

  It is a case:
  I bought the Libretto U100 of some guy (his property), booklet assembled with 30 GB and 512 RAM... I changed the RAM to 1 GB and ask my it guy (friend) to change disk... everything went well...

  After the change, I installed a version of winmx... with all the taken drivers support Toshiba (u100 drivers)... one of them has been updated BIOS level...

  After all, I found that my manager material showing an error... mass storage (yellow marks not informing - no drivers), module Ethernet (not even driver) and fire wire (133smth) who cannot not start this service to inform...
  At the same time, I found that Ethernet is probably Wi - Fi which are not recognized by Windows XP (switch works and led goes on or off depending on my action)...

  What to do with it? Is there any «wise» service in my part of Europe (Poland)?
  Thx for the help
  Andrew

  Hello

  According to specification for laptop, your laptop is supported for Windows XP Home edition and to avoid problems with installation of drivers, tools and utilities. To have the operating system successfully installed, you must install all the stuff in order of specific facilities.

  It is very important that you install Windows XP SP2 home edition.
  After the installation of Windows XP Home edition continue to install the drivers, tools and utilities following this order of installations:
  Windows XP Pro Edition SP2
  Chipsets Intel (r) software installation utility
  TOSHIBA common Modules l
  Intel (r) 82852/82855 GM/GME Graphics Controller
  SoundMAX Integrated Digital Audio
  TOSHIBA software modem
  Intel(r) PRO/100 VE Network Connection
  Bluetooth Stack for Windows by Toshiba
  Bluetooth monitor
  Wireless LAN driver
  SD Secure Module
  TOSHIBA controls
  TOSHIBA HDD Protection
  TOSHIBA SD memory card format
  TOSHIBA SD Memory Boot Utility
  TOSHIBA Hotkey Utility for display devices
  Wireless keyboard shortcut
  TOSHIBA screen utility unit of change
  TOSHIBA zooming Utility
  TOSHIBA Power Saver
  TOSHIBA utilities
  Password TOSHIBA utility
  TOSHIBA ConfigFree
  ConfigFree demo screensaver
  TOSHIBA management console
  TOSHIBA fingerprint utility
  TOSHIBA PC Diagnostic Tool
  TOSHIBA Assist
  TOSHIBA Virtual Sound
  CD/DVD Drive Acoustic Silencer

  If I'm missing something you can install it at the end.

  If you need assistance contact service professional. The addresses and telephone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!

• Upgrade the hard drive in the Libretto U100 to SSD drive

  Anyone who undertakes an upgrade of the hard drive in a Libretto U100 to a SSD? This would surely greatly improve performance. What size is the hard drive in the U100 and which connector is used to connect the drive? Can anyone tell if this mod is possible?

  Spymaster

  So, I have a machine with an SSD (Tecra M5) and it works like a charm. Unfortunately, the discs are too expensive at the moment but you can benefit from a real performance.

  Regarding your question: should be possible. You have a 1.8 inch drive "installed and there are SSDS which have almost the same form factor. Usually the U100 was delivered with MK6006GAH or MK3006GAL disks.

  Here´s a site that might help, given that the reader has the same connector as the disc in your computer: http://www.dvnation.com/microatapics.html

  Just check it out and I hope you can use my index research on SSDS... :)

  Welcome them