Libretto U100 memory upgrade (2 GB, part II)

I tried to respond to the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=39592&tstart=0 thread, but it is blocked? Srange.

I had a glance my U100 Hardware information and there is certainly 1 x 1 GB memory available, so no mem edge.

Hello

I found the same info. Libretto U100 has no memory on board and did a RAM slot only.
This little book can handle with max 1 GB of RAM.
If you are already using the maximum RAM supported by Libretto U100.

Tags: Toshiba

Similar Questions

  • Libretto U100 - instructions to upgrade memory required

    Hello

    I have a Libretto U100 with 512 MB of RAM. I would switch to the maximum value allowed.

    Please can you direct me where I can get a diagram and instructions on how to install myself.

    Please can you confirm the part No.

    Thanks & regardss friendly.

    Hello

    Maybe you have an old version of the user manual. So in your case, I would like to download the most recent manual on the Toshiba site:

    http://EU.computers.Toshiba-Europe.com-online downloads support & -online download user manual

    Good bye

  • Libretto U100 2 GB memory upgrade?

    On the librettoworld.com forum (http://forum.librettoworld.com/u-model/maximum-ram-capacity-t31.html) there is a debate as to the maximum capacity of ram of the Libretto U100.

    According to the specifications of the U100, 1 x 1 GB is the maximum. According to intel, the maximum value of the 855GME chipset (http://www.intel.com/Products/Notebook/Chipsets/855GME/855GME-overview.htm) is 2 GB.

    So, can I use a single 2 GB module in my U100, or 2 GB for memory 2 slots or something?

    Hello

    Maybe you need to download the user manual and need to check.

    The user manual says:
    The slot accepts the module of RAM of 256 MB, 512 MB and 1 GB for a maximum of 1280 MB of memory.

    You know that 256 MB of RAM is installed on the motherboard than the internal memory and can not be deleted.
    As a location is available and you can use only one memory card!

    Good bye

  • Libretto U100: Question about upgrade 60 GB HARD drive

    Sorry about that...

    I gave a number of price and the part for an UPGRADE to my MEMORY *(NOT THE HARD DISK) * 512 to 1 GB part number: KTT3311/1 G of OFFTEK. I hope this is the correct number of memory for the U100 with part number in my previous message.

    Looking for the number of the hard disk.

    What I found was a * HD 60GB 2.5 "8 MB 5400 RPM - part of Sweety: MK6034GAX * for £29,19 INC VAT. From DABS.com
    Is that the correct HD at this price? The cost of £80 - £100 elsewhere.

    Therefore, the upgrade from a 30 to 60 GB HD that I am looking for the part number for.

    Sorry for the confusion.

    Thanks for any help, a contributor can offer.

    Hello

    You can use the modules of memory from different manufacturers. Only the specifications of memory are important! Compatible modules are DDR2-400/333 PC2700.

    If you want you can also use these modules from Toshiba:
    512 MB (PA3412U - 1 M 51)
    1024MB (PA3313U-2M1G)

    You know this site of memory? :
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=31679&ft=m&St=3

    You will also find compatible modules from Kingston.

    With regard to the drive HARD;
    Well, the price of HARD drive are different. It's not easy to tell if the price is too high or not. It depends on many factors such as; place of purchase, dealer, country, etc.

    The Libretto U100 was delivered with a 60GB drive HARD IDE (ATA-6).
    You can use every HARD disk that supports the specifications of this!

    So just google for the best offer or contact the ASP in your country to order a new HARD disk that is compatible.

  • Libretto U100 - modules uncounted after disk upgrade

    Hello

    Please help me find the solution or dedicated instead of U100 service.

    It is a case:
    I bought the Libretto U100 of some guy (his property), booklet assembled with 30 GB and 512 RAM... I changed the RAM to 1 GB and ask my it guy (friend) to change disk... everything went well...

    After the change, I installed a version of winmx... with all the taken drivers support Toshiba (u100 drivers)... one of them has been updated BIOS level...

    After all, I found that my manager material showing an error... mass storage (yellow marks not informing - no drivers), module Ethernet (not even driver) and fire wire (133smth) who cannot not start this service to inform...
    At the same time, I found that Ethernet is probably Wi - Fi which are not recognized by Windows XP (switch works and led goes on or off depending on my action)...

    What to do with it? Is there any «wise» service in my part of Europe (Poland)?
    Thx for the help
    Andrew

    Hello

    According to specification for laptop, your laptop is supported for Windows XP Home edition and to avoid problems with installation of drivers, tools and utilities. To have the operating system successfully installed, you must install all the stuff in order of specific facilities.

    It is very important that you install Windows XP SP2 home edition.
    After the installation of Windows XP Home edition continue to install the drivers, tools and utilities following this order of installations:
    Windows XP Pro Edition SP2
    Chipsets Intel (r) software installation utility
    TOSHIBA common Modules l
    Intel (r) 82852/82855 GM/GME Graphics Controller
    SoundMAX Integrated Digital Audio
    TOSHIBA software modem
    Intel(r) PRO/100 VE Network Connection
    Bluetooth Stack for Windows by Toshiba
    Bluetooth monitor
    Wireless LAN driver
    SD Secure Module
    TOSHIBA controls
    TOSHIBA HDD Protection
    TOSHIBA SD memory card format
    TOSHIBA SD Memory Boot Utility
    TOSHIBA Hotkey Utility for display devices
    Wireless keyboard shortcut
    TOSHIBA screen utility unit of change
    TOSHIBA zooming Utility
    TOSHIBA Power Saver
    TOSHIBA utilities
    Password TOSHIBA utility
    TOSHIBA ConfigFree
    ConfigFree demo screensaver
    TOSHIBA management console
    TOSHIBA fingerprint utility
    TOSHIBA PC Diagnostic Tool
    TOSHIBA Assist
    TOSHIBA Virtual Sound
    CD/DVD Drive Acoustic Silencer

    If I'm missing something you can install it at the end.

    If you need assistance contact service professional. The addresses and telephone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

    Good luck!

  • Upgrade the hard drive in the Libretto U100 to SSD drive

    Anyone who undertakes an upgrade of the hard drive in a Libretto U100 to a SSD? This would surely greatly improve performance. What size is the hard drive in the U100 and which connector is used to connect the drive? Can anyone tell if this mod is possible?

    Spymaster

    So, I have a machine with an SSD (Tecra M5) and it works like a charm. Unfortunately, the discs are too expensive at the moment but you can benefit from a real performance.

    Regarding your question: should be possible. You have a 1.8 inch drive "installed and there are SSDS which have almost the same form factor. Usually the U100 was delivered with MK6006GAH or MK3006GAL disks.

    Here´s a site that might help, given that the reader has the same connector as the disc in your computer: http://www.dvnation.com/microatapics.html

    Just check it out and I hope you can use my index research on SSDS... :)

    Welcome them

  • Libretto U100 - error if I use the SD memory Boot utility

    Hello

    I'm trying to format and install a starter BACK on a 2 GB SD system. Laptop is a Libretto U100.

    I can read and write the 2 GB SD used in my digital camera cards.

    As far as I can tell the SD memory card Format program works well. But when I run the utility Boot memory SD I always the following error message:

    TSDBOOT

    Error reading. This disc may be unformatted or is not inserted.

    I don't have a floppy drive, so I always use the option 'Read from an image file.
    I used VFD to create a virtual floppy drive that I formatted as a bootable diskette, and recorded an image of it. But I've also tried other images, I found using Google.

    I tried two different SD cards by two different manufacturers.
    I've updated the BIOS with the latest version on this site.
    I checked the version of compatible SDA Standard SD Host Controller and it's the last. But I uninstalled and reinstalled in all cases.
    I tried to format with SDFormatter V2.0.0.3 by Panasonic SD cards

    All to nothing does not. Whenever I get exactly the above error.

    I try next?

    Mike

    Mike Merci for the comments.

  • Libretto U100 keyboard - need to replace it - important!

    Hi someone where I can get a replacement keyboard for Toshiba Libretto U100 Model No.: PLU10E-009017EN. My current has a missing key on it and some of the keys stopped working because of the drink being hit on by children. A connected external keyboard works fine, but I would like to find a replacement keyboard to ask them on the booklet. Any ideas where I can find one and the expected price?

    Hello

    You know every part of Toshiba compatible and taken in charge you can buy and order at the Toshiba service partner in your country. I'm sure that it s also able to order keyboard for you little and smart booklet ;)

    Trying to communicate with the guys from ASP and they will be able to order the part compatible keyboard quarter of head of Toshiba.
    Data from ASP, you will find on the Toshiba supports the page.

  • Low value RAM on my Libretto U100

    Hello. I have a Libretto U100. He is supposed to have 512 MB of RAM. But when I check it through "My Computer" it says that there are 496 MB. Can someone explain why this is? Thank you.

    Hello

    It's because of the shared memory graphics card.
    This laptop comes with Intel 855GME 16 to 64 MB shared memory graphics card.
    If the graphics card needs of more memory it takes to main memory.
    The default value is 16 MB.
    512 MB - 16 MB = 496 MB ;)

  • Libretto U100's VGA cable

    I searched a VGA adapter cable for my Libretto U100 so I can have one on the monitor at home and at work. Unfortunately, I have not been able to locate anyone to sell them, and that they are not listed on the Toshiba site as an accessory.
    Does anyone know if it is possible to buy these cables from anywhere?

    Hello

    Well, as I know the 100U booklet uses a Mini-RGB port to connect an external video monitor.
    Unfortunately, it failed for me to find this cable or adapter. But I recommend you to contact the ASP. I m sure there is a possibility to sell you this part.

    Good bye

  • 9150 memory Upgrade - Question once again

    Good day to all,

    I have 2, Dimension 9150 who receive upgrades. The first machine was fine with OS WIN 7 / 32 PRO. Updated BIOS (A07), not installed the required software, no problem, everything no problem. RAID driver install also, no problem. Problem I have is the memory upgrade. Get machine 2 update, but not until this problem is resolved.

    Been revised post old topic of memory and still has not found an absolute remedy to my question. Machine (1 and 2) are 2 GB; 4 512 PC2-4200 (all locations showing on bios config).  I installed 4; 1 GB PC2-5300. Problem? Must not like system accepts 4 GB maximum and is also accepted speed Max.

    My problem is 2 GB in slot 1-2 (white) are good, no problems (boots to windows without error beeps). Check the BIOS and find sticks of memory are reading fix it. When I add the other 2 sticks of 3-4 (black), error on boot beeps and lights 1-3 lights telling me memory error.

    I recently updated a dimension 4700 and used memory not dell Komputer Bay. Could see all the modules and showed 3.76, so I bought the same memory for this machine. I know that in the past, Dell machines are "FINICKY" when it comes to memory.

    Is this the case? If so, Crucial memory has been discussed and I might add 2 (2 GB each)? That's what I was not able to see the answers. Part of the crucial says Yes, post only memory. The other Yes was that I could use sticks of 2 GB. Spec note 1 GB is max stick, per slot.

    I am at a loss, if you're looking for an idea on a direction.

    Yes, low density 2 rank INTEL chipset compatible ram works fine. The other way to say it isn't that 380 Precsion ecc ram works fine.   The GX620 has the same problem where we will see more ram by the bios but total ram is limited to 4 concerts by the chipset.  Upgrade to a precision 380 allows a full 8 gigabytes of ram.

    You could put 4 x 2 gig and he would show even in the bios but the ram would not be usable and the machine does not start with 64 bit OS.

  • Pavilion Elite HPE-170f Deskto: Memory Upgrade

    I have the HP Pavilion Elite HPE-170f desktop.

    Motherboard: Pegatron IPMTB-TK (Truckee)

    Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

    Storage media: 6 x DDR3

    Memory type: Types DIMM PC3-8500 (DDR3-1066)

    I currently have 8 GB of memory.

    What is the maximum I can install?

    Operating system: win 10 Pro 64-bit

    Thank you

    John

    @jmwright1058

    Memory upgrade information

    • Architecture memory triple channel

    • Six DIMM DDR3 240-pin connectors

    • Supports types DIMM PC3-8500 (DDR3-1066)

    • Memory non - ECC, unbuffered

    • Supports DIMM DDR3 4 GB modules

    • Supports up to 24 GB on 64 bit computers

    • Supports up to 4 GB * on 32-bit computers

  • Card SD NOT recognized on the Libretto U100/U105 with Win XP

    I have several booklet, a combination of U100 and U105, with Win XP SP3.

    I now have a camera with an SD card, but nothing to see everything in the booklet any SD card into the slot.
    I'm astronished and disappointed that Toshiba is a not ship computers laptops with SD card reader drivers.

    Please, should what driver I install to get the SD card reader work?

    Thanks in advance!

    > I am astronished and disappointed that Toshiba is a not ship computers laptops with SD card reader drivers.

    So all the drivers for Win XP for this Libretto U100 series are available on the European driver Toshiba page
    So I m wondering why you're disappointed with Toshiba

    However, I could find the driver choose:
    Product type: Archives
    Family: booklet
    Series of products: Libretto U100
    Short num: PLU10E
    OS: Windows XP

    Now you should get all the Win XP drivers.

    I guess that the Cardbus driver is the driver you are looking for her should get the card reader controller to work.
    In addition, you must install the SD Secure Module. This software is an update for your TOSHIBA Secure Digital Host controller.

  • HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

    < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

    Chassis: HP Compaq 6000 Pro Compact

    Processor: Intel Core 2 Duo @3. 00 GHz

    RAM: 2 x 1 GB

    OS: Windows 7 Pro 64-bit

    I can add more technical info on request.

    Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

    Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

    So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

    DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

    I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

    I decided to get 2x4gb and upgrade later if I felt the need.

    I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

    BEEP BEEP BEEP BEEP BEEP!

    I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

    So I changed the RAM of DIMM 2 DIMM 3.

    Once again, the annoying ringtone.

    I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

    I tried a lot of different combinations with the end result is 5 annoying beeps.

    After that I thought that maybe, just maybe, an update of the BIOS can change things.

    So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

    I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

    I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

    I read the forums here, but I couldn't find a thread with a solution for me.

    Is there anyone on this forum who could lend me a helping hand?

    Any information would be gladly appreciated.

    PS Please report any stupid error, I did. Stick and stones could not curb my bones.

    Hello:

    See this related post... the elite 8000 is basically the same model as the Pro 6000.

    Resources memory very finnicky needs...

    http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

  • Should what cable I connect a Libretto U100-105 to a LCD TV?

    Should what cable I connect a Libretto U100-105 to a LCD TV?
    The pc has an external monitor port, but I can't tell what kind of connector, it is, since I have never seen one like this.
    Thank you

    Hello

    It all depends on the available ports.
    To my knowledge the U100 supports a Mini VGA Port and an adapter was supplied with the laptop.
    http://en.Wikipedia.org/wiki/Mini-VGA

    In your case I am looking for a cable that is capable of connecting a mini VGA port with a port VGA (RGB) common, which is probably available on your TV

Maybe you are looking for

  • Sound happens, but can't hear it

    My reading is set on Scarlett 18i20, all inputs and outputs are defined accordingly, nothing is cut and the volume is completely upward.  There is a signal that crosses on the SPL bar, then why can't I hear anything?  It worked before, do not know wh

  • 3.1 AT100 not seen by Win7 as a network device, dlna fail

    My AT100 with v3.1 can use the Toshiba Media Player integrated to transmit certain types of video from my PC Win7 Home Edition, but the PC can't see the AT100 as a WiFi-connected device. As the AT100 is certified compatible DLNA (I know that "complia

  • Can't update without Windows of self-destruction!

    After the update a few weeks ago... Bad software removal tool... My father PC had white exclamation points all on that screen P.O.S.T.... then the screen would go and NOTHING...! Restart, and then go to the Startup Repair tool... Windows Startup Repa

  • Incompatibility of WEP key

    not serious... I don't want to use WEP to a SSID public, but told me to do. Yes... I read every single document of WEP I can find... still can't make it work... wasted so many hours on it! the customer is a selectable dual band of Cisco/Linksys AE100

  • Windows Explorer stops working when USB drive is ejected

    Hi all I'm having a problem with the windows Explorer. When you eject a USB device, windows Explorer stops working and must restart. It also stops working when trying to get the properties of the USB device. I watched "Event Viewer" and there is an e