Libretto U100 2 GB memory upgrade?

Similar Questions

• Libretto U100 memory upgrade (2 GB, part II)

  I tried to respond to the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=39592&tstart=0 thread, but it is blocked? Srange.

  I had a glance my U100 Hardware information and there is certainly 1 x 1 GB memory available, so no mem edge.

  Hello

  I found the same info. Libretto U100 has no memory on board and did a RAM slot only.
  This little book can handle with max 1 GB of RAM.
  If you are already using the maximum RAM supported by Libretto U100.

• Libretto U100 - instructions to upgrade memory required

  Hello

  I have a Libretto U100 with 512 MB of RAM. I would switch to the maximum value allowed.

  Please can you direct me where I can get a diagram and instructions on how to install myself.

  Please can you confirm the part No.

  Thanks & regardss friendly.

  Hello

  Maybe you have an old version of the user manual. So in your case, I would like to download the most recent manual on the Toshiba site:

  http://EU.computers.Toshiba-Europe.com-online downloads support & -online download user manual

  Good bye

• Libretto U100: Question about upgrade 60 GB HARD drive

  Sorry about that...

  I gave a number of price and the part for an UPGRADE to my MEMORY *(NOT THE HARD DISK) * 512 to 1 GB part number: KTT3311/1 G of OFFTEK. I hope this is the correct number of memory for the U100 with part number in my previous message.

  Looking for the number of the hard disk.

  What I found was a * HD 60GB 2.5 "8 MB 5400 RPM - part of Sweety: MK6034GAX * for £29,19 INC VAT. From DABS.com
  Is that the correct HD at this price? The cost of £80 - £100 elsewhere.

  Therefore, the upgrade from a 30 to 60 GB HD that I am looking for the part number for.

  Sorry for the confusion.

  Thanks for any help, a contributor can offer.

  Hello

  You can use the modules of memory from different manufacturers. Only the specifications of memory are important! Compatible modules are DDR2-400/333 PC2700.

  If you want you can also use these modules from Toshiba:
  512 MB (PA3412U - 1 M 51)
  1024MB (PA3313U-2M1G)

  You know this site of memory? :
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=31679&ft=m&St=3

  You will also find compatible modules from Kingston.

  With regard to the drive HARD;
  Well, the price of HARD drive are different. It's not easy to tell if the price is too high or not. It depends on many factors such as; place of purchase, dealer, country, etc.

  The Libretto U100 was delivered with a 60GB drive HARD IDE (ATA-6).
  You can use every HARD disk that supports the specifications of this!

  So just google for the best offer or contact the ASP in your country to order a new HARD disk that is compatible.

• Libretto U100 - modules uncounted after disk upgrade

  Hello

  Please help me find the solution or dedicated instead of U100 service.

  It is a case:
  I bought the Libretto U100 of some guy (his property), booklet assembled with 30 GB and 512 RAM... I changed the RAM to 1 GB and ask my it guy (friend) to change disk... everything went well...

  After the change, I installed a version of winmx... with all the taken drivers support Toshiba (u100 drivers)... one of them has been updated BIOS level...

  After all, I found that my manager material showing an error... mass storage (yellow marks not informing - no drivers), module Ethernet (not even driver) and fire wire (133smth) who cannot not start this service to inform...
  At the same time, I found that Ethernet is probably Wi - Fi which are not recognized by Windows XP (switch works and led goes on or off depending on my action)...

  What to do with it? Is there any «wise» service in my part of Europe (Poland)?
  Thx for the help
  Andrew

  Hello

  According to specification for laptop, your laptop is supported for Windows XP Home edition and to avoid problems with installation of drivers, tools and utilities. To have the operating system successfully installed, you must install all the stuff in order of specific facilities.

  It is very important that you install Windows XP SP2 home edition.
  After the installation of Windows XP Home edition continue to install the drivers, tools and utilities following this order of installations:
  Windows XP Pro Edition SP2
  Chipsets Intel (r) software installation utility
  TOSHIBA common Modules l
  Intel (r) 82852/82855 GM/GME Graphics Controller
  SoundMAX Integrated Digital Audio
  TOSHIBA software modem
  Intel(r) PRO/100 VE Network Connection
  Bluetooth Stack for Windows by Toshiba
  Bluetooth monitor
  Wireless LAN driver
  SD Secure Module
  TOSHIBA controls
  TOSHIBA HDD Protection
  TOSHIBA SD memory card format
  TOSHIBA SD Memory Boot Utility
  TOSHIBA Hotkey Utility for display devices
  Wireless keyboard shortcut
  TOSHIBA screen utility unit of change
  TOSHIBA zooming Utility
  TOSHIBA Power Saver
  TOSHIBA utilities
  Password TOSHIBA utility
  TOSHIBA ConfigFree
  ConfigFree demo screensaver
  TOSHIBA management console
  TOSHIBA fingerprint utility
  TOSHIBA PC Diagnostic Tool
  TOSHIBA Assist
  TOSHIBA Virtual Sound
  CD/DVD Drive Acoustic Silencer

  If I'm missing something you can install it at the end.

  If you need assistance contact service professional. The addresses and telephone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!

• Upgrade the hard drive in the Libretto U100 to SSD drive

  Anyone who undertakes an upgrade of the hard drive in a Libretto U100 to a SSD? This would surely greatly improve performance. What size is the hard drive in the U100 and which connector is used to connect the drive? Can anyone tell if this mod is possible?

  Spymaster

  So, I have a machine with an SSD (Tecra M5) and it works like a charm. Unfortunately, the discs are too expensive at the moment but you can benefit from a real performance.

  Regarding your question: should be possible. You have a 1.8 inch drive "installed and there are SSDS which have almost the same form factor. Usually the U100 was delivered with MK6006GAH or MK3006GAL disks.

  Here´s a site that might help, given that the reader has the same connector as the disc in your computer: http://www.dvnation.com/microatapics.html

  Just check it out and I hope you can use my index research on SSDS... :)

  Welcome them

• Libretto U100 - error if I use the SD memory Boot utility

  Hello

  I'm trying to format and install a starter BACK on a 2 GB SD system. Laptop is a Libretto U100.

  I can read and write the 2 GB SD used in my digital camera cards.

  As far as I can tell the SD memory card Format program works well. But when I run the utility Boot memory SD I always the following error message:

  TSDBOOT

  Error reading. This disc may be unformatted or is not inserted.

  I don't have a floppy drive, so I always use the option 'Read from an image file.
  I used VFD to create a virtual floppy drive that I formatted as a bootable diskette, and recorded an image of it. But I've also tried other images, I found using Google.

  I tried two different SD cards by two different manufacturers.
  I've updated the BIOS with the latest version on this site.
  I checked the version of compatible SDA Standard SD Host Controller and it's the last. But I uninstalled and reinstalled in all cases.
  I tried to format with SDFormatter V2.0.0.3 by Panasonic SD cards

  All to nothing does not. Whenever I get exactly the above error.

  I try next?

  Mike

  Mike Merci for the comments.

• Low value RAM on my Libretto U100

  Hello. I have a Libretto U100. He is supposed to have 512 MB of RAM. But when I check it through "My Computer" it says that there are 496 MB. Can someone explain why this is? Thank you.

  Hello

  It's because of the shared memory graphics card.
  This laptop comes with Intel 855GME 16 to 64 MB shared memory graphics card.
  If the graphics card needs of more memory it takes to main memory.
  The default value is 16 MB.
  512 MB - 16 MB = 496 MB ;)

• Pavilion Elite HPE-170f Deskto: Memory Upgrade

  I have the HP Pavilion Elite HPE-170f desktop.

  Motherboard: Pegatron IPMTB-TK (Truckee)

  Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

  Storage media: 6 x DDR3

  Memory type: Types DIMM PC3-8500 (DDR3-1066)

  I currently have 8 GB of memory.

  What is the maximum I can install?

  Operating system: win 10 Pro 64-bit

  Thank you

  John

  @jmwright1058

  Memory upgrade information

  • Architecture memory triple channel

  • Six DIMM DDR3 240-pin connectors

  • Supports types DIMM PC3-8500 (DDR3-1066)

  • Memory non - ECC, unbuffered

  • Supports DIMM DDR3 4 GB modules

  • Supports up to 24 GB on 64 bit computers

  • Supports up to 4 GB * on 32-bit computers

• Card SD NOT recognized on the Libretto U100/U105 with Win XP

  I have several booklet, a combination of U100 and U105, with Win XP SP3.

  I now have a camera with an SD card, but nothing to see everything in the booklet any SD card into the slot.
  I'm astronished and disappointed that Toshiba is a not ship computers laptops with SD card reader drivers.

  Please, should what driver I install to get the SD card reader work?

  Thanks in advance!

  > I am astronished and disappointed that Toshiba is a not ship computers laptops with SD card reader drivers.

  So all the drivers for Win XP for this Libretto U100 series are available on the European driver Toshiba page
  So I m wondering why you're disappointed with Toshiba

  However, I could find the driver choose:
  Product type: Archives
  Family: booklet
  Series of products: Libretto U100
  Short num: PLU10E
  OS: Windows XP

  Now you should get all the Win XP drivers.

  I guess that the Cardbus driver is the driver you are looking for her should get the card reader controller to work.
  In addition, you must install the SD Secure Module. This software is an update for your TOSHIBA Secure Digital Host controller.

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

• Should what cable I connect a Libretto U100-105 to a LCD TV?

  Should what cable I connect a Libretto U100-105 to a LCD TV?
  The pc has an external monitor port, but I can't tell what kind of connector, it is, since I have never seen one like this.
  Thank you

  Hello

  It all depends on the available ports.
  To my knowledge the U100 supports a Mini VGA Port and an adapter was supplied with the laptop.
  http://en.Wikipedia.org/wiki/Mini-VGA

  In your case I am looking for a cable that is capable of connecting a mini VGA port with a port VGA (RGB) common, which is probably available on your TV

• The problem with the battery on the Libretto U100

  Hello.

  The problem is the following: shortly after the start of the loading of the battery starts squeaking (or whistle, subtle signals coming from somewhere inside the laptop or battery) and after a while, stop the load! Windows displays a message, "Battery" unknown, to continue the exercises, you must remove and insert again the battery and so 5 times until the load is complete. And the absence of such an accusation, not more than 1 hour and 45 minutes.

  That's happened?

  Libretto U100

  Capitalist salvation,
  Remember john lennon? "It's easy".

  I think that this little piece of Tech is a bit old...
  and has been used for a period of time to stay...

  the battery disappeared, some cells can't hold not more fresh...
  therefor the voltage misscounted, leads to the "unrecognized".
  We must exchange the battery...

  but no problem for a capitalist you don't ;-)

• Libretto U100 - SD card reader does not work with XP SP3

  Hi, I recently bought a Libretto U100, and when I put a 2 GB SD card in the locked computer drive, screen froze and had to reboot the system.

  I reinstalled the OS XP pro SP2 recovery disc and SD card reader worked fine. However as soon as I've updated all the software to SP3 the problem comes back.

  All the suggestions/help is appreciated.

  It's strange, but have you tried to update the BIOS? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also make sure you have all the patches and updates for Windows XP is installed. Visit the Windows Update Web site.

• Libretto U100 - DVD - RW is not responding

  Hello

  I have a Libretto U100 with a Toshiba DVD RW (docking station) and it does not respond when you use a DVD.

  In the past that I was able to press the play button, back and forth when you use the Windows Media Player on the DVD player, but it also doesn't work anymore.

  Please could you let me know if it is possible to solve the problem.

  Thank you.

  I agree with Garrett. You need to reinstall the software