Libretto U100: Creating an SD ram with the Boot Toshiba utility bootable

Similar Questions

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• Can I use PC400 RAM with the Tecra A4 (Pentrium 750)

  Can I use PC400 RAM with the Tecra A4 (Pentrium 750), currently PC333 is mounted.

  Thank you

  I put t know if you can use but AFAIK Toshiba recommends using these modules on the Tecra A4:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)
  1024MO PC2700 (PA3313U-2M1G)

  Here are the modules of single channel 166 MHz DDR333/PC2700, DDR SDRAM, 200-pin SoDIMM.

• Problem in creating several attributes XML with the same name of the attribute

  I am trying without success trying to create several attributes XML with the same name, as shown here in a Microsoft example configuration file:

  
  
    
       
       
       
    
  

  I'm calling the NewDocument GetRootElement functions and then "newelement" (appSetting), "newelement" (add)

  Then I call AddAttribute with add, key & Key0, then with add, value & 0.  This seems to work fine but when I try to add the second pair of key & Key1 and value attributes & 1 for item "Add" replaces ""and I find myself with"" only.

  I do something wrong or CVI is not able to create an XML of this type?

  Thank you

  Here's how you do it. I show not to keep things simple error checking.

  #include

  public static void CreateAddElement (mother of CVIXMLElement, const char * key, const char * value)
  {
  Add the CVIXMLElement;
  CVIXMLNewElement (parent, -1, 'Add', &add);)
  CVIXMLAddAttribute (add, "touch", key);
  CVIXMLAddAttribute (add, "value", value);
  CVIXMLDiscardElement (add);
  }

  void main (void)
  {
  CVIXMLElement root, and appSetting;
  Doc CVIXMLDocument.
   
  CVIXMLNewDocument ("configuration", &doc);)
  CVIXMLGetRootElement(doc, &root);)
  CVIXMLNewElement (root,-1, "appSetting", and appSetting);
  CreateAddElement (appSetting, "Key0", "0");
  CreateAddElement (appSetting, "Key1", "1");
  CreateAddElement (appSetting, "Key2", "2");
  CVIXMLDiscardElement (appSetting);
  CVIXMLDiscardElement (root);
  CVIXMLSaveDocument (doc, 1, "c:\\temp\\temp.xml");
  CVIXMLDiscardDocument (doc);
  }

• VRA unable to create groups of companies with the same name in different tenants with vRO

  vRA 6.2.2 Build - 2754020

  vRO 6.0.1

  Through the vRA GUI I can create groups of companies with the same names in different tenants as follows:

  Tenant1: BusGroup1, BusGroup2, BusGroup3

  Tenant2: BusGroup1, BusGroup2, BusGroup3

  
  

  However, to create business groups with the same names in different tenants via the vRO, specifically the workflow plugin Library / vCloud Automation Center / Administration / Business groups / create a group of companies, fails in the second tenant with the below error:
  

  
  

  [42106] the specified condition is not respected for 'name '. (Name of the dynamic Script Module: createBusinessGroup #12)

  If I change the naming convention to be different by tenant, then I have no problem. I thought it might be a restriction in the product, but as said I was able to create with the names of same origin through the user interface.

  Anyone experience the same thing?

  This is a known problem within IaaS API the plugin vRO uses to manage groups of companies through business groups workflows. You don't have the same problem of the vRA UI because the user interface (according to the 6.x) does not use the same API IaaS to manage groups of companies.

  The only alternative to 6.x for now is to directly use the helper generic entity Manager plug-in itself. You can take a look at the first example in example CRUD Infrastructure tasks management Scripts.

  I hope it helps.

  Sergio

• Create a local user with the vSphere Client

  Hello

  I want to create a new user with the permission of readonly. In the vmware documation salon, they say I have to go to the tab local users and groups, but there is no tab with that name.

  And sorry for my English I'm not a native speaker.

  Hi and welcome to communities,

  This tab is visible only when you connect to the ESXi directly with the vSphere Client. You won't see when you connect to a vCenter server.

• I need to update the screenshots for a new version of an app existing Itune application to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• When I use dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  When I use Dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  Are you spotted with temporary files?  In Edition > Preferences > Preview in browser.

  Nancy O.

• Headers fail loading dimension with the contour fill utility.

  When I try to load a dimension with the contour fill utility I get the following error message in charge of contour newspaper.

  «Impossible to get analytical information and/or perform a data load: values of unrecognized column header, refer to previous posts.» (Note: column header values are case sensitive.) »

  Is there another newspaper, that I can go to in order to see what the value of the header is the cause of the problem?  The alternative is to remove a header at a time and try to make the charge, and since this dimension has more than one column, it would take a lot of time.  As a result a sample of my data file.

  Parent account, Alias: by default, operation, data storage, calculation re encoding, Type of account, balance time, value Skip, Data Type, Type of exchange rates, use 445, reports, Type of Plan (BUDGET), on the gaps Plan of aggregation (BUDGET), Type (BALSHT), aggregation (BALSHT), Source Plan Type

  Account, IncomeStatement, update, dynamic Calc, 0,.

  IncomeStatement, 300000, Net income, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  300000,310000, total income before taxes, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  300000,311000, income before tax from operations update, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  310000,312000, another Exp (Inc), the update, the dynamic Calc, 0, expense, flow, currency, fees, 1, 0, +, BUDGET

  300000,320000, provision for income, dynamic update tax Calc, 0, expense, flow, currency, fresh, 1,-, 0,-, BUDGET

  320000,321000, costs of update, store, expense, flow, current taxes, currency, 1, 0, +, BUDGET

  320000,322000, deferred Taxes, update, store, fresh, flow, currency, charges, 1, 0, +, BUDGET

  300000,330000, minority interests, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  300000,340000, income from investment in Subs, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  300000,350000, back, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  311000,400000, the gross margin, update, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  400000,410000, net income, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  410000,411000, gross, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  411000,411100, income from operations, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  411000,411200, BALSHTenue synergy, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  411000,411300, IC revenue, update, store, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  410000,412000, returns and allowances, update, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  412000,412100, return on sales, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT

  412000,412200, discount sales, update, store, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT

  400000,450000, cost of sales, updated, dynamic Calc, 0, expense, flow, currency, fresh, 1,-, 0,-, BUDGET

  Try to run with running sec/n to validate and/m to generate headers. While doing this, you can also add a log location execption using /X. This will tell you what a question header.

  Review the generated header and examine the wrong header in the exception log.

  Concerning

  Celvin

  http://www.orahyplabs.com

• Cannot convert win2k server - fails with the boot.ini on the version 3 and 4 error!

  Hello

  I am trying to convert an old win 2000 Server on an esx server, and I'm having a little trouble.  I am trying to run the converter and version 3 already tried with no luck.  On version 3, it manages at the end, think 97% I think and fails.  When I look in the logs of the converter, it seems to resemble a mistake with the boot.ini file.  I left the server for some time and today I have just spotted that the new version of the converter is out and although I'd give it a try.

  Unfortunately, I will have a chance to convert the server again.  It is not the last step.  Ive joined the output of the converter v4 logs.

  Here are the contents of the boot.ini file:

  boot loader

  Timeout = 0

  default = multi (0) disk (0) rdisk (0) partition (2) \WINNT

  "multi (0) disk (0) rdisk (0) partition (2) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  I would appreciate any advice or tips that I've been struggling with this and I have to get the server took off the old hardware that crack, on which it is running.

  Thanks, much appreciated

  "multi (0) disk (0) rdisk (0) partition (1) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  Error 1450 (hive loading error: insufficient system resources exist to complete the requested service (1450)) temporary loading hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE under the name of the mntApi181664643429986496 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE, error 0x5aa.

  23202 error when you open the software hive

  Cannot read the news of the OS on the system disk: 23202

  You must increase the size limit of the registry on the source. For more details, see: Conversion failed with 1450 PlatformError under Windows 2000 or NT (1005979).

  Please award points if that's the right answer.

• Create a virtual machine with the physical RAM total?

  I want to virtualize ESXi 4 on my MacBook Pro. However, I have 2 GB of RAM and ESXi 4 requires a minimum of 2 GB.

  I posted in the community of ESXi (is it possible to virtualize ESXi 4 with less than 2 GB of RAM?) and there is a solution for using ESXi with less RAM, but the problem is that I first need to run the installation with 2 GB.

  Basically, I tried to create a virtual machine with 2 GB, but the maximum I can use is 1840MB. Is it something that I do with Fusion to increase this limit? I understand that I am under a host operating system and requiring too little RAM, but just to get through the ESXi installation isn't it possible to push the VM of RAM to 2 GB and the host what OS increase the pagefile to deal with the lack of RAM?

  Any help would be appreciated!

  Thank you

  You may be able to edit the .vmx file and change the memsize option either 2048 or more. The merger is able to start a virtual machine with more memory that the host, just UI prevents common users to exceed the limits of security in general.

  I'm not quite sure what would happen if the VM actually tries to use all of the memory. If all goes well, it will be just talk and run slowly. Of course, the worst case are that it crashes.

• Libretto U100: Screen short film playing with Express Media Player

  Hello.

  I have a Toshiba Libretto U100 with DVD Dock, and when I use Express Media Player to play the DVD, the image on the screen is too small. I find the way to play in full screen mode but I failed.

  Now the questions.

  It is there a way to switch to full screen mode? If so, please detail.

  If this is not possible with the included version, there is a new version or an update that will be available with this feature? where can I get (if it's free) or buy (if this isn't the case) it?

  Thanks in advance and best regards. Your help would be very appreciated.

  Pleasant :D Watch movies on booklet can you recognize anything? ;)

  I put t know if it is possible to do so in the Media Express drive s

  But if you come in on the edges of the annoying screen then I have a solution:
  Go to-> graphics controller Intel Control Panel and select the option called mode full screen (without borders)

  Best regards

• Libretto U100 Bluetooth error message indicates - getting the list of files fail

  Hello

  I try to connect my Libretto U100 Bluetooth to a new Sony Ericsson mobile software Bluetooth for exchanging information.

  I can connect and see the files on the mobile phone, but when I click on the folders, there is an error message indicating "getting the list of files doesn't have."

  New drivers must or is there something else I need to set up at all?

  Previously, I was able to connect to any other mobile phone with no problems.

  Thank you in advance for help you.

  Hello

  I m sure that it s is not a Bluetooth problem or a cell phone if it s possible to connect Sony Ericsson and other mobile phones. Unfortunately, I'm not very familiar with this laptop but I found this site with FAQ on your mobile phone.

  http://www.Ericsson.com/Contact/FAQ.shtml
  http://www.Esato.com/Help/FAQ.php

  In addition, you should check the manual of the phone. I sure you will find a description of m

  Good luck

  Good bye

• Satellite U400 cannot create DVDs of recovery with the recovery disk creator

  Hello

  I have a Satellite U400 (a few years), and I never created the recovery DVDs.
  Now I want to do, but for some reason, when I run creator of Toshiba Recovery disk, nothing happens...
  The partition containing the files of recovery is there, as well as the folder HDDRecovery. I have add a few files on this partition, this could be the problem?

  Thanks for your help.

  > I have some files on this partition, this could be the problem?
  N ° if you didn t change the partition structure should not be the problem.

  It is: does this Toshiba recovery disc creator market or not? If you can not star this tool has nothing to do with the recovery files.
  You will find this file - C:\Program Toshiba Toshiba Recovery Disc Creator\TRORDCLauncher.exe?

• MD101LL/A + 2SSD + 16 GB of ram with the hiccups

  Hello ladies and gentlemen!

  Unfortunately my MacbookPro 13 "mid-2012 last only two years without any problem. I was more than satisfied with the purchase and modification of the Windows system and was amazed by the reliability that this computer can give you. When I bought it I also bought 16 GB RAM Kingston and asked the Apple dealer to install it. Year later, I bought the Samsung 850 PRO 128 GB SSD and put second life in this machine. Everything worked well, and by "working", I mean the intensive use of Photoshop, Lightroom, Illustrator, InDesign and same first also connected to monitor the second.

  After you install Yosemite, I started having some minor problems with sudden restarts and so on, nothing special when you're used to Windows machines. A few months later, I started having the problem with multicolored stripes on the screen who proposed the GPU problem or the motherboard. They showed only successive, especially on a very intense use. Then I went to the Iceland carrying my mac in the backpack I used to do on other trips. For 10 days, when MacBook was not connected to the secondary monitor, everything was fine. When I came back the problem began to occur more often at the point when I wasn't able to use the laptop more because he gave me only three annoying sounds and restart. I discovered that probably it's dying motherboard.

  I sent the MacBook to the Apple reseller and they cleaned the motherboard of every kind of moisture or rust might be, they have changed the two cables, run all this fancy diagnostics and my laptop was like new again. Everything started working. At least that's what I heard on the phone. When I arrived to pick up the consultant has started to show me how it works and then BAM! Scratches on the screen again! You should see his face!

  It turns out that when he holds the laptop with one hand, pressing the left side of the touchpad seeds present! Conclusion: problem with memory. The location of the bottom to be exact. Superior was beautiful, no matter what sticks of RAM, we used. The bottom has always been a failure. So I was left with only 8 GB of RAM and the upgrade of an another SSD instead of the Cd-ROM-Samsung 850 EVO 500 GB SSD.

  This configuration has worked quite fine, BUT from time to time, he showed a kind of hiccup that now are my daily problem...

  Please, watch the video below and tell me what the * is still happening?

  https://youtu.be/CMNX8esMBiU

  (ofc I know check slows performance, but it has the same appearance when the only recording not)

  TECHNICAL SPECIFICATION:

  Safari extensions installed yesterday while they is not serious

  No current in the Console kernel panic

  Yosemite 10.10.5 (14F27)

  BANK 0 / 8 GB 1600 MHz DDR3 RAM Kingston

  BANK 1 / no

  SAMSUNG SSD 850 PRO 128 GB / available: 48,85 GB / only for the system, applications and documents

  SAMSUNG SSD 850 EVO 500 GB / available: 14.59 GB / hiding of lightroom, all heavy, backups files

  ETRECHECK:

  EtreCheck version: 2.6.6 (226)

  Report generated 01/06/16 13:34

  Time 02:00

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook Pro (13-inch, mid-2012)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  Vacuum

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 555 - SN = 9G2280LMND3NC

  Video information: (Does that mean?)

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  DELL U2412M 1920 x 1200

  Software: (Does that mean?)

  OS X Yosemite 10.10.5 (14F27) - since the start-up time: 13 hours

  Disc information: (Does that mean?)

  SAMSUNG SSD 850 PRO 128 GB disk0: (128,04 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  System (disk2) /: 126,84 GB (48,83 GB free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 127,18 GB Online

  SAMSUNG SSD 850 EVO 500 GB disk1: (500,11 GB) (Solid State - TRIM: Yes)

  EFI (disk1s1) : 210 MB

  Boot OS X (disk1s3) : 134 MB

  Data (DIS3) / Volumes/data: 499,41 GB (14.59 GB free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk1s2 499.76 Go online

  USB information: (Does that mean?)

  NOVATEK USB keyboard

  Logitech USB-PS/2 optical mouse

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  / System/Library/Extensions

  com.Wacom.kext.pentablet [no charge] (5.3.6 - 10.9 SDK) [click for support]

  Startup items: (Does that mean?)

  TuxeraNTFSUnmountHelper: Path: / Library/StartupItems/TuxeraNTFSUnmountHelper

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.EscrowSecurityAlert.plist [killed]

  com.apple.Maps.pushdaemon.plist [killed]

  com.apple.SafariCloudHistoryPushAgent.plist [killed]

  com.Apple.cloudphotosd.plist [killed]

  com.Apple.CoreServices.appleid.authentication.plist [killed]

  com.Apple.icloud.fmfd.plist [killed]

  com.Apple.photolibraryd.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  [loading] com.paragon.NTFS.notify.plist [click to support]

  10 killed process lack of RAM

  Launch system demons: (Does that mean?)

  com.Apple.awdd.plist [killed]

  com.Apple.ctkd.plist [killed]

  com.Apple.ifdreader.plist [killed]

  com.Apple.nehelper.plist [killed]

  com.Apple.softwareupdated.plist [killed]

  com.Apple.wdhelper.plist [killed]

  6 killed process lack of RAM

  Launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [operation] com.adobe.AdobeCreativeCloud.plist [click to support]

  [loading] com.oracle.java.Java - Updater.plist [click to support]

  [loading] com.paragon.updater.plist [click to support]

  [operation] com.wacom.pentablet.plist [click to support]

  Launch demons: (Does that mean?)

  [operation] com.adobe.adobeupdatedaemon.plist [click to support]

  [loading] com.adobe.agsservice.plist [click to support]

  [loading] com.adobe.fpsaud.plist [click to support]

  [loading] com.klieme.TMSHelper.plist [click to support]

  [loading] com.klieme.TimeMachineScheduler.plist [click to support]

  [operation] com.klieme.TimeMachineScheduler.wake.plist [click to support]

  [loading] com.noatime.root.plist [click to support]

  [loading] com.oracle.java.Helper - Tool.plist [click to support]

  [loading] com.oracle.java.JavaUpdateHelper.plist [click to support]

  [loading] com.rockysandstudio.WUHelper.plist [click to support]

  User launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [loading] com.google.keystone.agent.plist [click to support]

  [operation] com.spotify.webhelper.plist [click to support]

  [loading] com.valvesoftware.steamclean.plist [click to support]

  Items in user login: (Does that mean?)

  WD Quick View Application (/ Library/Application Support/WDSmartware/WDQuickView.app)

  Other applications: (Does that mean?)

  [loading]    QA2G25RMZ4.com.Wunderkinder.Wunderlist - helper

  [ongoing] com.adobe.Lightroom5.19912

  [operation] com.adobe.acc.AdobeDesktopService.85800.C8DB8C27-B43E-4D2C-9DCC-BB991669AA97

  [ongoing] com.Adobe.accmac.46040

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000012.Spotify

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000016.EtreCheck

  [ongoing] com.google.Chrome.26444

  [ongoing] com.wacom.ConsumerTouchDriver.84948

  [ongoing] com.wacom.TabletDriver.85516

  [ongoing] com.wdc.wdquickview.84096

  Plug-ins Internet: (Does that mean?)

  AdobeAAMDetect: Version: 3.0.0.0 - 10.9 SDK [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]

  Default browser: Version: 600 - SDK 10.10

  AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

  Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Silverlight: Version: 5.1.30514.0 - 10.6 SDK [click for support]

  JavaAppletPlugin: Version: 31 to check the version of Java 8 update

  Safari extensions: (Does that mean?)

  Facebook cleaner

  WOT

  SafariRestore

  EverNote Web Clipper

  Save in the Pocket

  SessionRestore

  Turn Off the Lights

  3rd party preference panes: (Does that mean?)

  Flash Player [click for support]

  Java [click for support]

  MacFUSE [click for support]

  NTFS - 3G [click for support]

  Paragon NTFS for Mac® OS X [click for support]

  Tuxera NTFS [click for support]

  Tablet chart [click for support]

  WDQuickView [click to support]

  Time Machine: (Does that mean?)

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Destinations:

  TimeMachineBackup [network]

  Total size: 1.98 TB

  Total number of backups: 0

  An older backup: -.

  Last backup: -.

  Size of backup drive: Excellent

  Size of backup TB 1.98 > (disk size 0 B X 3)

  Top of page process CPU: (Does that mean?)

  12% WindowServer

  12% com.apple.WebKit.WebContent (21)

  11% kernel_task

  5% adobe CEF Helper (3)

  4% spotify Helper (2)

  Top of page process of memory: (Does that mean?)

  Com.apple.WebKit.WebContent (21) 2.30 GB

  Kernel_task 975 MB

  180 MB Spotify Helper (2)

  115 MB Adobe Photoshop Lightroom 5

  Safari of 115 MB

  Virtual memory information: (Does that mean?)

  19 MB of free RAM

  7.98 used GB RAM (865 MB Cache)

  1.95 GB used Swap

  Diagnostic information: (Does that mean?)

  January 6, 2016, 01:09:24 ~/Library/Logs/DiagnosticReports/Adobe Photoshop Lightroom 5_2016-01-06-010924_ .crash [deleted]

  January 6, 2016, 12:03:58 AM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2016-01-06-000358 _ [redacted] .crash

  January 6, 2016, 12:03:27 AM self-test - spent

  January 5, 2016, 11:13:23 ~/Library/Logs/DiagnosticReports/Notes_2016-01-05-111323_[redacted].crash

  January 5, 2016, 12:30:49 AM [redacted] ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-01-05-003049_ .crash

  January 4, 2016, 12:47:23 AM ~/Library/Logs/DiagnosticReports/Electron Helper_2016-01-04-004723_ [redacted] .crash

  Ashes of /Library/Logs/DiagnosticReports/PenTabletDriver_2016-01-04-000858_[redacted].cr 4 January 2016, 12:08:58 AM

  January 4, 2016, 12:08:49 AM /Library/Logs/DiagnosticReports/Kernel_2016-01-04-000849_[redacted].panic [click for more information]

  27 December 2015, 16:03:08 /Library/Logs/DiagnosticReports/Kernel_2015-12-27-160308_[redacted].panic [click for more information]

  16 December 2015, 14:52:58 /Library/Logs/DiagnosticReports/Kernel_2015-12-16-145258_[redacted].panic [click for more information]

  8 December 2015, 14:43:20 /Library/Logs/DiagnosticReports/Kernel_2015-12-08-144320_[redacted].panic [click for more information]

  Lack of RAM is hurt your performance based on the number of swaps.  Have you determined that the one RAM slot is defective or a RAM module has been/is perhaps the problem.

  Check if you have the panics of the kernel in you library.  If so, use these instructions to record and post a:

  https://support.Apple.com/en-us/HT201753

  Ciao.