Life expectancy and recommended 'throw' supplies
I am familiar with the date 'Use before' HP on the parcel and use/expiration on the plotter date real supplies (printing and the ink heads) in the box. As we all know, users will buy the blocks in advance waiting to use it, and then before they know is 1 to 3 years later and supply was not being used. I searched for some data how long after the Date of prior use that HP recommends using the supplies. Personally, I think you can try the print head and if it solves the problem, then use and monitor. As for the ink, I'm not sure. I know also it didn't ink sit inside the printheads from the factory and can cause a degradation of the quality problem.
I have a client that I found where they had a provider as apparently before you print a label and covered the use before date. I used a heat gun to remove the label enough to reveal the date and this supply to use prior to 12/06. They have also just ordered 2 heads of print/cleaners at Amazon for their Designjet 5500ps and their dates were Jan 13 and 13 May. I recommended that they file a complaint.
Thoughts, ideas, or the actual data there.
TIA
This forum focuses on the level of consumer products. For the Designjet that you can have better results, post in the forum HP Designjet here, this is where the Designjet experts hang out.
I used very old cartridges (five to ten years late) eBay on my Designjet 650 c with some success. This old Designjet cartridges with print head built into the supply of ink and tends to be more forgiving of old (and usually thickened) ink - if the cartridge is not working properly, it can be replaced. In newer Designjet models, like the Designjet 5550 you mention, supplies the ink and print heads are separated and there is a significant amount of plumbing to deal with. These models are more sensitive to the problems with the old supplies, when there is a risk of thickened ink clog plumbing or the print head. My guess is that a year too old stuff are probably not a problem, but supplies of 2006 are probably asking for trouble.
document here is some basic information that may be useful.
Tags: HP Printers
Similar Questions
-
I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?
If you want your Apple Watch to stay connected to the phone, you need to keep compatible BlueTooth.
All functions of the phone will use up the battery life. Some things more than others. Screen brightness, low cell signal strength and location services are major culprits. If you are having battery problems, see this article:
http://www.scottyloveless.com/blog/2014/the-ultimate-guide-to-solving-iOS-batter y-drain
I don't know what it means being out of doors has to do with the question.
-
What is the life expectancy of the Apple pencil? The battery can be replaced or do I need to buy a new stylus?
According to iFixit (of https://www.ifixit.com/Teardown/Apple+Pencil+Teardown/52955 )
- The pencil is clearly not intended to be opened or repaired; You can't get inside without destroying the device.
- The layers of plastic and metal holding the interior components are impossible to remove without grinding.
- The battery enough for a 12 hour race, is impossible to replace, which gives the device a limited life expectancy.
-
What is the battery life expected to a new stack in a Mac Book Pro?
What is the battery life expected to a new stack in a Mac Book Pro? I am running OS X El Capitan10.11.3
I just had my battery replaced, and today, I looked at that and I got 7 1/2 hours on a charge. This doesn't seem much.
Apple announced 8-9 hours on the 15 "MacBook Pro 2010. This is an extremely optimistic number in light, ideal operating conditions.
Your 7.5 hours is fine.
-
Since I couldn't find any document from Cisco (Cisco produces only that, the longer life ISAKMP, safer) of the directive.
I was wondering if I config life ISAKMP (phase 1) shorter than the life expectancy of IPsec (phase 2). What happens when I still have the traffic through the VPN, the ISAKMP his timeout reachs tunnel. Phase 2 would also got laid off, and turn all the negotiation of Phase 1 VPN again?
Any help will be appreciated.
-Angela
Angela:
We probably need to consider the context of your use of the term "session".
If you had to define an ACL crypto that consisted of a single access control entry (example: 192.168.1.0 ip allow 0.0.0.255 192.168.2.0 0.0.0.255), which would be generally * lead to the creation of an ISAKMP security association unique and two IPSec security associations. Lets call it a "session encryption.
As you said, the implementation of the session "encryption" was triggered by a "session" (for example: TCP) between two hosts (each behind their respective ends of the tunnel). Additional meetings (for example: TCP) between different hosts on two sites, do not need other IPSec security associations. Security associations previously established IPSec supports all traffic defined by the ACE in the ACL crypto.
For each extra ACE in your ACL crypto, you would see the creation of a pair of IPSec security associations (assuming traffic defined by the ACE triggers it) extra.
If you need to set the layer 4 criteria (e.g.: TCP port 80) in an ACL crypto, that would be horrible. IPSec security associations are negotiated for each combination of source/target port used by a host. For example: A single host visiting a single web site (by the crypto tunnel), would open in general multiple TCP sessions (each with a different source port), and IPSec security associations are negotiated for each TCP session. This would quickly deplete resources on the cryptographic endpoints.
We generally use P2P GRE or love with IPSec to swap info dynamic routing between sites. Because the traffic between sites is encapsulated in GRE, only a single proxy is needed.
edg01 #show crypto ipsec his
Interface: Tunnel0
Tag crypto map: addr Tunnel0-head-0, localprotégé of the vrf: (none)
local ident (addr, mask, prot, port): (/ 255.255.255.255/47/0)
Remote ident (addr, mask, prot, port): (/ 255.255.255.255/47/0)In this case, a single proxy is used. IP addresses are external physical IP addresses of crypto tunnel endpoints. Mode of transportation (where the 255.255.255.255 masks). The '47' is the GRE protocol.
* Note: Sometimes, each cryptographic peer begins negotiations with the other, causing two bidirectional redundant ISAKMP SAs.
Best regards
Mike
-
Hello, I was using this website, the life, love and Family.net fine until about 20 minutes ago. Now, the site looks strange, everything is on the left side of the screen and I'm not able to click on the radio programs more.
If I could you send a picture of what's happening on this site, I would.
So can you please help me solve this problem?
Thank you, Monica
Hello, please see the common troubleshooting steps at the Web sites look bad or display differently they should
-
When I download the version 7.0.1 my firewall software reports as "Malicious" and recommend that I have not install it. What gives?
- Make sure you download firefox from www.mozilla.org (there is a fake site floating around)
- If the Zone Alarm still complains, he is very probably protect you from a 'new' file. Security systems for this often for you to protect against "Zero-day vulnerabilities", or programs that have not yet been analyzed by the security company.
-
Life expectancy of a 'new' refurbished Lenovo W520
Hi all!
I recently bought a refurbished Lenovo W520, with a brand new SSD and the new ram as well. The model goes back to 2011 and it looks actually pretty new in this is the general appearance.
These are purchased by companies whose users, I guess, probably used less intensely and probably with more care than the average user.
My question is; How long should I wait for this machine to work? He's already got what I assume to be nearly half a decade on his back, and even if some essential (SSD and Ram) parts are brand new, I am always worried about the longevity of the rest of its internal components.
Thanks in advance!
-Philip
I only really worry the cooling problems. It always speaks by making a much traveled W520. According to the number of hours of use, the laptop has had and the conditions, it has been preserved in, thermal paste could be replaced on the GPU/CPU and the fans/vents might need suddenly out with compressed air to remove any buildup. It's all a work of $6 to do yourself (materials: thermal paste and compressed air, remove the keyboard and the keyboard setting, remove the pipes on GPU/CPU.)
I guess that you have received a new battery (obviously these age and there is no way the original spec is more) and the LCD shows no problem (Panel light darkens over time but always mine high with only a little pink cast near the corners - although to be fair, mine had a life shaken and fallen several times on hard surfaces of some long-distance).
In the past, on other thinkpads, only other points of failure were the bearings in cooling fan requiring a replacement fan assembly failure and graphics (sometimes of the cable charts overwork through the hinge.) I have one of these problems with the W520 still. The hinge is better designed than many previous thinkpads and the cooling is less active which will span the life of any pads of the fan. It is with the 2000M GPU (1000M models have other issues because both had different designs cooling.)
Currently I have an SSD mSATA Plextor (Win 7 Pro OS - put to test at SATA2 speeds) in slot mSATA near trackpad and a SSD Pro of Samsung 850 in the hard drive Bay (win 10 Pro OS - tested SATA3 sppeds.) The system works well. For awhile, I thought win 10 was never going to work right and I need to replace the W520 immediately but finally Nvidia fixed their optimus drivers and the laptop is really eye-catching win 10. (Technically the W520 is not listed by Lenovo, a sustained Win 10 portable if Microsoft said that he would retire.)
-
What is the life line and why am I charged $26.99 for something or other on my purchased iCloud account?
There is a life saver app in the App store (p 79) and several vital services on Google. If you are unsure about a receipt, there's an invitation on the bottom to "report a problem". Report your problem.
-
Received phone call from someone who identified himself as a member of the Technical Support of the Windows team. Says my calculation had sent messages back saying that I had a virus. Was skeptical and didn't know how to check if it was legitimate then toldl him I would take care of him. Ran Norton Security and Windows security and both reported that my system do not have a virus. Noticed that Windows update was not the last 2 weeks so I tried to run the updates. I get a sayingi error message that FAILURE of installing up-to-date security for KB2656353 and KB2656370. I downloaded all the patches and recommended tools. What should I do?
Have you tried the recommendations in this thread:
and this article:
-
I get a message saying that the installation has detected that a reboot of the machine may be pending and recommend I have quit the installer and restart my machine. I did 4 times and tried to install again and again but keep the same message. Help, please!
Hi Keleahaiko,
Please click on IGNORE and continue with the installation, let us know if this helps.
-
I downloaded and installed LR and PS and they throw very well but when I try to change an ARW raw file all I get is a blue screen. Can anyone help?
Go to Preferences, Performance tab and uncheck the 'use graphics processor '.
-
The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open
Hi Marcelo,
You may need to check this: Re: Premiere Pro 2015 won't open after the recent update
Kind regards
Navdeep Pandey
-
Hello. I paid a package CC for Photosho and Lightroom, photography package. CC download photoshop, it still regristers LR as a trial and recommend me buy PS when I already paid. I am a user of PS and AE.
Please see the links below.
- Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
- Applications creative Cloud back in test mode after an update until 2015 for CC
Also, make sure you use the right adobe ID to log in.
Hope this will help you.
Kind regards
Hervé Khare
-
What is the life expectancy of the Support of Oracle E-Business Suite extended-release
What is the life expectancy of the Support in Oracle E-Business Suite 11.5.10 extended release.
Up to what time it is supported.
Kind regards.Y at - it all any date deadline for this support extended?
According to the pdf document that is referenced in the links above, it is "Nov" 2013.
Life Support policy Oracle - Oracle Applications
http://www.Oracle.com/us/support/library/lifetime-support-applications-069216.PDFThank you
Hussein
Maybe you are looking for
-
Equium A210-17I - how to restore to factory settings?
I want to restore my system to the factory systems but I don't have a disc. So how do we do it without having a?
-
Screen goes black on Satellite 1110-Z20
Hello! On a Satellite 1110-Z20, the screen could suddenly become dark. Fumble to the display-white-button (the one key when you close it) will bring to life again. All the energy registers settings are set to 'off', always, the display is obscured so
-
Important, I can't find the table of the hierarchy for Sony - for a research paper
Hello Student and a PS3 gamer. I need a chart of the hierarchy for Sony - for a research paper I thank.
-
ProBook 450 G2: fingerprints fingerprints
HelloPlease can not read my my laptop fingerprintHow can play this?What is the used programs?and link this program?Please fixed this problemsThank you
-
Sorry for the use of this thread I can't find a way to post new problem. How amplitude and level VI calculates RMS calue for multi-frequency signals. For your unique, Vrms = Vpeak/sqrt (2) gives same result but for multi-frequency signals, is not mat