Similar Questions

• InD4 - don't put text to the edge of the page - need to apply a header! Help!

  I'm putting a text box at the top of my document to use as a header - something I've done hundreds of times before.  But this time, when I add a text box and add text, is that he is an invisible object with a wrapping of text applied, and it won't let me put my text at the top of the page.

  FYI: text box options are defined to align the text at the top and ignore the skin on other objects.  I tried selecting all to see if there was something that I was missing and would not delete - no chance.  Even tried to shut down InDesign, reopening, and begin a new document - it does the same thing on the new document.

  It is a space of about an inch wide, that extends from one side of the page to the other - but just on top - I can place the text all the way at the edge of the page on the sides and bottom, no problem.  Help!

  

  My guess is that you have aligned to your text to the document network... and your grid starst slightly below the top of your page... If that s the case, you have two options to solve your problem:

  (1) set your grid´s starting point for preferences > grids

  (2) change your paragraph style to assign None to the text snap to grid, you find not to withdraw and Spacing tab (or alternatively you can change local control panel as well)

• Can CSS Class selectors apply to < head > objects?

  Hello

  I tried to apply the same piece of text < title > of each page and I was wondering if this could not be done with a CSS: before pseudo-element

  Title: front

  On a more general level, this kind of thing is possible for all < head > objects or is - it only works for things in the body of <>

  TIA,

  JC-

  No, you cannot apply classes, IDS, or what anyone in the head of the inline styles.

• My discovery of network lights I apply and stay personal all the time since last night

  Since last night, my network discovery is in the custom; I click on turn we apply and do not change it.

  It's urgent

  Hello

  1. what operating system is installed on your computer?

  2 did you change on your computer?

  Method 1:

  If you are using windows 7, I suggest you check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  I suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

• Cannot find header fan - G62 b29SA

  My friend owns a HP G62 laptop. He said that the fan has stopped working and I couldn't hear or feel so I'm a fan again and we opened the laptop. It turned out that the fan that I had purchased was not compatible. Later, I tested the fan using a 3 V power supply and it worked very well. I went to plug in the fan and I can't find the header! Could it have been knocked off of the motherboard? I am not and I do not know how to proceed.

  

  I found a marked header "header3' on the side opposite of the motherboard. It has three pins and is within reach of the connector on the fan. It's probably the header I was looking for.

• SectionList header skin

  Hello dear developers.

  I can find a way how to apply skin header personalized to a SectionList. I try many ways: UISkin, SectionHeaderRenderer, and CellRenderer whithouy success.

  Can anyone provide a small working example please? I would be very appreciated!

  Hello

  I think you must have been close. Most likely to lack one important line of code to assign an attribute «isHeader» I have hlited in red. Parm1 and Parm2 and just for an example, showing that you can pass the whatver you want in the skin.

  I quickly mocked something for you. There are probably many ways real set up, but I used something like that and it works

  1. somewhere, you define your skin header:

  aList.setHeaderSkin (HeaderRenderer);

  2. create the converter class

  SerializableAttribute public class its extends CellRenderer
  {
  private var _SkinableCompPright = new SkinableComp();
  public void HeaderRenderer()
  {
  __isHeader = true;
  Super();
  }
  override public function set data($Object___bject):void
  {
  _SkinableComp.setSkin (new HeaderListSkin ($Object, parm1, parm2));
  _SkinableComp.drawNow ();
  _SkinableComp.skin.State = "up";
  addChild (_SkinableComp);
  }
  }

  3. create the real skin

  SerializableAttribute public class HeaderListSkin extends UISkin
  {
  protected var upSkinPright;
  protected var seSkinPright;

  public void HeaderListSkin ($Object, parm1, parm2)
  Super();
  }
  override protected function initializeStates (): void
  {
     
  upSkin = new Sprite();
  seSkin = new Sprite();
     
  setSkinState (SkinStates.UP, upSkin);
  setSkinState (SkinStates.SELECTED, seSkin);
  }
  override protected function draw (): void
  {
  fillUpSkin();
  fillSeSkin();
  }
    
  private function fillUpSkin (): void
  {

  }
  private function fillSeSkin (): void
  {
  }
    
  }

  I hope this helps!

• Header/footer fixed with scroll Inbetween

  I use Dreamweaver CS4 and am wondering if there is a way to have a fixed header or footer with scrollbar inbetween

  Sandy

  CSS:

  Remove the bottom of the body and apply to #header.

  #header {}

  text-align: center;

  Width: 100%;

  background-image: url(images/bkgrndImageHdr.gif);

  position: fixed;

  top: 0;

  Left: 0;

  }

  HTML:

  Move your #header above the #container div div

  header content & menu goes here

  "images/spacer.gif" width ="100" height ="5" alt = "spacer" / > "

  WELCOME

  The rest of the content of your page here...

  content of the footer post it here

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

  http://ALT-Web.blogspot.com/

• Mark as new

  Hi all
  
  I applied "Mark as New" a couple of topics for my follow-up, but now I can't find the option to remove it. Says HELP is on the properties of the subject, but only option, as well as a few other options that HELP says should be there, simply aren't.
  
  Probably I'm missing something basic, but...
  
  -Dobe

  Figured it out. Somehow my main output changed to WebHelp, which does not support this and other features in the "Advanced" tab

  Chagned back to HTMLHelp and can change.

  Thank you
  Dobe

• problem with adding line in tabular form after that put 4.1.1 to level

  We have recently installed the Update 4.1 .1. We now have a problem with some of our tabular forms created using the wizard. The delete and update feature works fine, but when trying to insert a new record, it will insert only the first record, but after that, it will no longer inserts. It acts as ApplyMRU (updated online Multi) is not at all shooting. No success or error message. I tried to create forms based on the rowid and also on the suites (with and without triggers), and they all behave the same way.
  
  This happens both in IE and Mozilla. Tabular forms were working fine before the upgrade.
  
  Everyone knows this?

  We just hit this issue and thanks to this thread and a light bulb above my head, resolved this question today. There is more to the story. Copy the necessary images in place works, but get the full version 4.1.1 images.

  We were already on 4.1.0.00.32, so I applied only Patch 13331096 upgrade to 4.1.1.00.23. Patch 13331096, at least one that I downloaded a few weeks ago IS NOT ALL OF THE NECESSARY IMAGES.

  Fortunately, I thought to download both. When I did a number of files in the directory images between the full version and the patch, the County came up short for the patch.

  If you have this problem, get your hands on the full release 4.1.1.00.23, NOT Patch 13331096and copy these files to image in place. Who sets the we.

• How to get a Page break before Inline TOC in EPUB?

  I export an epub book file.  The table of contents are created correctly online, but I can't yet find a way to get a page break right in front of her.

  In the export-> advanced EPUB Options, I chose Split Document-> export tags to paragraph Style to light.

  The header of the table of contents (saying "Table of contents") has the paragraph style "TOC direction.» In panel-> paragraph styles change all the tags to export, I checked the box for 'Split EPUB' next to the 'Table of contents for the topic' style.

  But after exporting, there is no page break before the header of the table of contents.

  How can I fix this?

  Thank you very much in advance for any info.

  Basically, I think that you are doing it correctly. I met the same problem. What I found is that the title of the table of contents PLACE (using the page layout > Table of contents function and place it on the page) will not work to make a page break. This is a special type of object, because it can be updated by the update command Table of contents.

  You need to do a work around: you need to create a "Table of contents" in a separate frame and apply the paragraph title style Table of contents.

  In the style of table of contents, include not happy for the TOC title. Check out the screenshots below of my OCD.

  

  

  By separating the "content" in its own frame, it works in EPUB:

  

• Office jet pro 6230: office jet pro 6230

  I have a new officejet pro 6230 and the lights indicate a print head problem.  I changed the cartridges, powered it on and off and still get the flashing lights.  I looked up the authorized service centers and there is not less than 1000 miles of Cleveland OH. (go figure).  I bought the printer at Amazon and hoping not to have to return it.  Does anyone have suggestions as to where to fix as it is under warranty or how to solve the problems of flashing light?  Thank you.

  I had a similar problem with a HP 8500 - and I followed the suggestion to replace the print (for a cost of US $130) TWO heads!  Unsurprisingly, after that the HP ALWAYS had the same problem.  I did some research on the problems of print head on this site and found out that in all cases (that I found) was the ONLY way that the problem has been resolved by completely replacing the printer.  Unfortunately, mine was out of warranty.

  But, since yours is still under warranty, my suggestion is to contact HP customer support - they will be able to tell you what they can do for you in respect of the guarantee: Contact HP customer care. HP® customer support

  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.
  
  I'm a volunteer and I do not work for, or represent, HP.

• Card error WiFi on my Satellite A200-1KZ

  Hello

  I have a Satellite A200-1KZ PSAE3 under Windows Vista Home Premium.
  I have a clean install, so I have no third party applications running in my energy system.
  I have the SKAA140a.rom (v 1.40).

  I installed the v1.5.6 Mobile Intel (r) 965 Express Chipset Family (GM965)
  I installed the Realtek High Definition Audio Driver vVista_R172a.zip

  The problem is:
  After 2 hours of running only windows, for example, "Free Download Manager"... the WiFi card lights error: "Exclamation mark" icon replace the 'world' next to the 'Network status' icon on the system tray.
  When this happened, I can't access properties of network or anything else related to the card.

  The problem is something on the MANAGEMENT of ENERGY, because if I have something that is running on the top and the screen saver and all that have not come: there is no problem.

  No idea why?

  Thanks in advance!

  (Sorry for my bad English)

  Hi there :)

  You can try this:

  Go to start => type "Device" in the search bar and open Device Manager-expand network adapters online => with the right button on the wireless card and select Properties => pass the tab power management and uncheck the box "allow the computer to turn off this device to save power".

• Wireless adapter

  Does anyone know what adapter dual band is compatible with HP 17-f121ds

  @Tabest

  @PeerOne just put a light bulb in my head.

  I think this is what you need.

  Intel Dual Band Wireless-AC 3160 802.11 ac 1 x 1 WiFi + BT adapter combo for use 4.0

  on computer models equipped with Intel for HP Pavilion 17 and 15 laptop processors

  710662 005

  Your manual here.

  http://support.HP.com/us-en/product/HP-Pavilion-17-notebook-PC-series/7234909/model/7415808/manuals/

  REO

• Change of power supply for the Alienware Aurora r4

  Hello, since my diet is reel whining I would change it

  I was looking for a bit of the PSU and found this one

  http://www.EVGA.com/products/product.aspx?PN=210-GQ-0850-v1

  is it good?, fit into the section of PSU aurora r4? It will connect to the back plastic, that normal power supply is connected to the rear?

  Also I don't know anything about sata cables, but there so much that normal power supply I mean it will be able to connect to what it is now? (only the change requiring more sata is the addition of two extra hdd/ssd (there was a spare sata cables))

  and... I need something more than that? (some wires or something?

  I have not wand to buy the same PSU again because seeing how it survived...

  Hello. I will address this, knowing that other users information. Your old harness case will be removed, the new chassis will have its own cables. The EVGA 850 GQ is ok, but the G2 is better, you can find them on Newegg / eBay / EVGA.com etc.

  I posted here, p4 #31, a list of links to swap & material, then go ahead, some links redirect here, like this:

  • Aurora ALX (mid-2010) - replacing the PSU - problem with Cages HD

  

  No - ALX a front SATA, so work of any type of SATA cable

  

  Chassis rear a SATA ALX

  

  who need some type of head SATA short height, like the originals

  • ALX not can use either type, due before access
  • ALX must use 'pass-thru' heads, like the originals, if the power is connected to the wall box

  

  EVGA uses these types of base with non - ALX SATA heads

  

  "standard heads.

  

  above, my Corsair cable has ALX-type amp heads:

  • the plastic is a two-piece, the rear insulation snaps off the coast
  • in an ALX installation, with the cable above, I would jump off the top, cut the wire to length, & apply two heads on it to mimic the original as close as possible

  If I had the EVGA SATA type?, I want to buy x 4 amp heads online:

  • frozen & perfpcs

  

  Note the two types of rear covers: "cap" (for superior insulation) & pass-thru-cap

  I would use these to "build" my own pair of cables to match the original cable pair, best I could. I could just shop any spare cable to amp heads, like here. My ALX has a set of hand-made cable, I already have the SATA cable mod, so they mimic the original case harness. Chassis no - ALX may not be no need for this type of care

  cs_setInnerHtml ('video_52a58bc9-1a1c-4f67-920c-275deafe8f88', ");

  Video: If your ALX means that you must transfer new SATA faces on

  

  note of the need for the extra long screwdriver get screw wall box

  Search "Power of Aurora" (Exchange of Aurora psu) or similar terms, search for images which could connect you to the messages posted by other users

  • not that X-Fire / SLI configs do best when using flat ribbon cables
  • EVGA uses sleeved around cables, cable so better manage you can

  "" All ATX power supplies are 5.9 "x 3.4", it's length is variable, & 'all' chassis PSU "should" adapt Aurora R1 - R4, with a chassis length 7.5"(190 mm) & shorter: example EVGA G2 is 7.1" length = ok, & my Seasonic 1250 is 7.5 "length, about maximum a person wants. Please read everything in all the links I already posted in, I won't be able to help beyond what I posted here. The G2 if it feels right for your case & know-how (=

  • SEASONIC Platinum 860 & plate 1050have Ribbon types
  • Corsair RM850i Gets a 9.9/10 JonnyGuru, world best PSU review site & forum, also has the ribbons dishes, $ 130 after rebate

• Missing menu on HP 4600dn IO

  Nice day

  I use Windows 7 with a 7300NX Billion Bipac router which is connected to the HP 4600dn.  I can't ping the printer and the reason is that one of my items in the printer menu has disappeared.  You should have three menu under i/o options:

  IO timeout

  Parallel entry

  EIO X

  Last X EIO is missing and I can't get an IP address.

  Previously I connect via a switch, but then the power switch has become defective so I connect directly to the printer, not knowing that I then have to use a crossover cable.  When you try to connect the billion router I don't have an IP address.

  Downloaded the HP Print and Scan doctor but still can't find the printer.

  Any help will be much appreciated

  Best regards

  André

  First thing you need to do is run a configuration page in the information on the printer menu. Do you get a second page with network information. If this is not the case, the printer network card went bad. If this is the case, you can sometimes repair it as more came with the 610N or 615N. To repair and it's no joke, you must remove the card with the power turned off and then remove the piece of plastic you'll need a driver torx10. Once the plastic piece is delete, prop the card upward in a baking pan with the chips to the top and the bottom of the map not touch the pan. Preheat a good oven at 350F (177C) and when the oven is ready, place the pan with the card in the oven for 8 minutes. Remove and let cool for 15 minutes. Again set back with power off space in housing EIO printer, connect the cable and lights up and you should now get the second page. If you get a second page then there may be a separate menu for the eio card item. Even if you do not find the menu that you can do is a cold reset the printer connected with a rj45 cable regular to the router. Turn on the printer while pressing the box until all 3 lights on solid. If they're not continuous, then turn on the printer and when the memory starts counting press and hold button until light green check mark all 3 are ongoing. Liberation and scroll down the menu to cold reset and press the check button. When the printer is ready, wait 2 minutes and then print the configuration again information page. The second page should now have an ip address that you can use or you can type this address into your web browser and make changes to what you want. Keep in mind in both cases, you should have a green link light on where the rj 45 cable connects to the card. If no link light, then you may have a problem with the cable or worse taking on the NIC itself may be faulty. Just for your information the Cook works because many of these developed cards cold solder on the central processor and cooking redéroule the weld to run again.