Lightroom 6: problem whith move file or a folder internal hd.
Hello, I buy lr 15gg 6 and worked fine but I have a problem.
The catalogue is to C then the images are in the external hard drive. When I want to to move a file in un folder, or move the folder to un external hard drive I get this message:
Impossible to move file to the chosen destination.
If I move files or records of C (internal hd) to Esternal hd, I have no problem.
I also have problems when I want to Rename un photo: Rename impossible!
Why?
computer laptop whith 8.1 W, 8 GB ram, SSD 180 GB.
The catalogue is C, while the images are in the external hard drive. When I want to move a file in a folder, or move the folder to an external hard drive, I get this message:
Impossible to move file to the chosen destination.If I move the files or folders of C (internal hd) Esternal HD, I have no problem.
What you describe in these two paragraphs sounds the same to me, but you say we work and we didn't. I'm confused.
However, the error message "'Impossible to move file to the selected destination" means that you don't have the appropriate permissions to your operating system to do this. " The original folder and the destination where the file should be moved in must have READ & WRITE permission. If you must change your permissions on these two issues.
Tags: Photoshop Lightroom
Similar Questions
-
I can't move files from one folder to another on Windows Vista.
Hello
I can't move files from one folder to another in windows Vista.It is quite frustrating.I am an administrator of the account.I get an error saying that I don't have permission to do the action.It is said: Destination folder access denied. You need permission to perform this action. Then the buttons 'Try Again' and 'Cancel '.Help, please!Here is a link to an image of the error I get when I try to move a file:Thank youJeremyExplorer
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
To see if a fix is available
In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.
You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.
If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).
Close the browser and start a command prompt
- Close Windows Explorer
- Start - All Programs - Accessories - right on command prompt and choose run as administrator.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete then Task Manager.
- Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
Then to restart the Explorer after trying all of the following
- Press Ctrl + Alt + Delete and choose Task Manager
- In the Task Manager, click the file menu and then click new task (run) and enter explorer
If you cannot start the Explorer at all
- Press Ctrl + Alt + Delete and choose Task Manager
- Under the processes tab, click Show processes from all users to elevate to administrator
- In the Task Manager, click the file menu and then click new task (run) and type cmd
- Other things you can try typing
Explorer
Explorer c:\
Explorer/e, c:\
wercon
control
Iexplore
Rstrui
If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.
Reregister the shell registry entries
It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
regsvr32 /i shell32
regsvr32 /i urlmon.dll
regsvr32 RPCRT4.dll
regsvr32 PROPSYS.dll
regsvr32 MSCTF.dll
regsvr32 cscui.dll
regsvr32 rsaenh.dll
regsvr32 timedate.cpl
regsvr32 ATL DLL
regsvr32 OLEACC.dll
regsvr32 actxprxy.dll
regsvr32 USERENV.dll
regsvr32 msshsq.dll
regsvr32 NaturalLanguage6.dll
regsvr32 thumbcache.dll
regsvr32 WINTRUST.dll
regsvr32 MMDevAPI.DLL
regsvr32 audioses.dll
regsvr32 audioeng.dll
regsvr32 ExplorerFrame.dll
regsvr32 msi.dll
regsvr32 FirewallAPI.dll
regsvr32 netshell.dll
regsvr32 pnidui.dll
regsvr32 QUtil.dll
regsvr32 c:\windows\system32\wpdshserviceobj.dll
regsvr32 WINHTTP.dll
regsvr32 C:\windows\system32\qagent.dll
regsvr32 C:\windows\system32\portabledeviceapi.dll
regsvr32 wbemprox.dll
regsvr32 wbemsvc.dll
regsvr32 fastprox.dll
regsvr32 imapi2.dll
regsvr32 wshext.dll
regsvr32 gameux.dll
regsvr32 msxml6.dll
regsvr32 vbscript.dll
regsvr32 jscript.dll
regsvr32 wshext.dll
regsvr32 wshom.ocx
regsvr32 wshcon.dll
regsvr32 scrrun.dllDelete the folder and the settings of the Menu
This will remove the settings are saved for each file that you visit. Also the order of the start menu.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f
Delete the thumbnail and icon Caches
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
attrib - r s h '% userprofile%\AppData\Local\*.db '.
del "% userprofile%\AppData\Local\*.db".
Disable thumbnails and previews
Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.
If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.
Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.
If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f
Turn around after testing the Explorer.
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f
A boot is a way to explore
It can be caused by a shell extension.
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
- Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
- Close Windows Explorer
- Start Autoruns by right-clicking and choose run as administrator
- Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
- Go to the Explorer tab and uncheck everything to the left.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete and choose Task Manager. Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
- Click the file menu and then click new task (run) and enter explorer
If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.
Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see problems explore
http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
Recycle BinIf the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).RD C:\$RECYCLE. BIN/s/qthen repeat for each drive to change the drive letter, for exampled:\$recycle Rd. BIN/s/qe:\$recycle Rd. BIN/s/qIf the Office does not startThis will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).MD "% userprofile%\DesktopTest".Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /fMD "% public%\desktopTest".Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t fTo restore default after having tested if begins to explore.Set ExpFix1 = % userSet ExpFix2 = % profilereg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fSet ExpFix1 = % PubSet ExpFix2 = % licreg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fYou will need to disconnect then. -
I get the "are you sure you want to copy or move files to this folder.
I get "Are you sure you want to copy or move files to this folder" when I try to mofiles on a file compressed... is there a way I can get rid of this warning that I'm moving hundreds of files (Yes its for a game lol) and it's such a pain to have to do this over and over
Hi, Fayesegaran,
Tools > Internet Options
Click the Security tab
Click the Local Intranet icon
Under automatically detect Intranet network
Ensure that all options are checked
Include all local (Intranet) sites not included does not in other areas
Include all sites that bypass the proxy server
Include all network (UNC) paths
Ensure that automatically detect Intranet network is not checked
Click on the Advanced button
Enter the site in the list and select Add, then OK. You can use a "web site" address as: file://192.172.10.44 when you use the IP address of the local server.
Press ok
Press ok
Press on apply, ok
http://www.faultwire.com/solutions-windows_xp/Windows-security-warning-* 1187.html
-
Move files to one folder of SFTP to another
Hi guys.
I have a gap in my process which could be easily solved with a planning tool (like Ctrl-M, SSC, etc.), but I only have to use ODI schedule.
I need to move all the files in the folder "in" my SFTP server and then move to the folder 'process '. Then after I'll be able to use the SFTPGet to download the files and work on them. As soon as I finished the job, then I'll need to move the files to the folder 'process' to the file 'job_done '.
I checked some threads here on the forum, but all of them are on FTP, SFTP not.
Is there a way to building that the use of a proc with operating system commands, ODITools?
Someone, please help me.
Kind regards.
Luiz Araujo
Cezar Santos (FactoryIdeas on please!)
I did this as a solution to my problem:
Used a tool ODI - OS command as follows:
OdiOSCommand
lftpftp://#SERVER:#PASSWORD@#MYSFTPHOST e s ' mv #vPATH_INCOMING / #vNM_FILE_INTERFACE #vPATH_ATPROCESS / #vNM_FILE_INTERFACE; Bye'
Obviously, he was placed inside a loop routine because he doesn't move all folders at once.
But thanks for the concerned.
-
When you manage files in iCloud, from an iPad, I can move to the files from one folder to another, but not in the Preview file. Secondly, when I check the file Preview to iCloud from Mac content is so different when you look at an iPad. Why is the gap between the iPad and the Mac?
Try to go to iCloud.com to see if the elements are there and whether the device or the computer. That should indicate if the device or computer is not synchronizing. If the computer, try going to System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing. If the device, go to settings/iCloud and do the foregoing.
-
Hi I did a lot of nommerune slide shows, anyway everythink was ok works well, but the maim site folder became a bit clutterd, so I made a new photo_slideshows shot record, but now on the pages of slidshow banner and bar spry show as broken, can all help please
If you always move files to your website using DW, you should be safe. Did you use Finder/Explorer for this movement instead?
-
Last night I started moving the external files on my PC hard drive internal to one of my hard drives for backup purposes. I've never had a problem in the past with older versions of LR but it's the first time I did it since arriving in LR CC. I moved several 100 RAW files last night with a problem, but as it was late, I stopped. I created LR move that several 1000 files today while I was only to return home and find that most of the files have not been moved and LR, saying that he cannot move them.
I tried to move a small folder of files but I get the same result, I'm quite puzzled by what worked yesterday doesn't work not today or the same as the older versions of LR. Any help to fix this would be greatly appreciated.
Thank you very much
Neil.
Arrgh I'm sorry dj_paige I just found the problem.
Windows has changed the drive letters on one of my external drives and I tried to move the files to a full drive! Not surprising that RAW files would not move.
I'm so sorry for wasting your time and can only apologize for not noticing the problem yesterday, I can only put it down to my own fatigue at the end of a long day.
I now eat a large slice of humble pie and feeling rather stupid.
-
Original title: problem in HOTMAIL?
In HOTMAIL I recently received this pop-up window as soon as I send, move to another folder etc and I was wondering if there is a problem.
Windows Internet Explorer
Internet Explorer cannot open the Internet site HTTPS://sn134w.snt134.mail.live .com/default.aspx?wa=wsignin1.0.
Operation abandoned
But it does not stop. When I close the window, the action takes place.
Hello
As you use Windows Live Hotmail, I recommend you contact Hotmail for assistance support.
For more information, please visit: Windows Live Hotmail: main problems and Support information
Hope the helps of information.
-
My MOV files to freeze during the download of my Canon T2i DSLR on my laptop HP - Vista
I recently bought a digital camera Canon T2i with HD video. I can download the pictures on my laptop HP with Windows Vista very well, however, when I try to upload the MOV files - it freezes in the middle and freezes also the functions of the computer and I have to perform a hard reboot. I managed to download once out of many attempts, but when I tried to play the video it froze when I double clicked on the file. Any ideas on what may be the problem?
I recently bought a digital camera Canon T2i with HD video. I can download the pictures on my laptop HP with Windows Vista very well, however, when I try to upload the MOV files - it freezes in the middle and freezes also the functions of the computer and I have to perform a hard reboot. I managed to download once out of many attempts, but when I tried to play the video it froze when I double clicked on the file. Any ideas on what may be the problem?
=====================================
Not really a definitive right answer... just some info...Have you tried to insert your memory card into a media
drive and copy / paste the .mov files into a folder on your
hard drive.Apple QuickTime .mov files require a compatible support
Player... perhaps the following links will propose a few ideas:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)The components of the 3ivx decoder read
most MP4, M4A, 3GP, MOV and AVI files
with Audio MPEG-4 video and MPEG-4 AAC3ivx decoder
http://www.3ivx.com/download/
(this should make Windows Media Player compatible
with the .mov files... I think that there is a 30 days trial version)Also... the following freeware players can play QuickTime .mov files.
Apple QuickTime
http://www.Apple.com/QuickTime/Download/QuickTime Alternative
http://www.codecpackguide.com/quicktimealt.htmVLC Media Player
http://www.videolan.org/Media Player Classic
http://www.filehippo.com/download_media_player_classic/
(just unzip and run it... (no installation required)Media Player Classic Home Cinema
http://MPC-HC.sourceforge.NET/If you want to install a pack of codecs... one of the following
may be worth a try:* Proceed at your own risk *.
K - Lite Codec Pack (full)
http://www.filehippo.com/download_klite_codec_pack/
FWIW... it is always preferable, if you create a system restore
point before installing any software or updates.CCCP (combined Community Codec Pack)
http://CCCP-project.NET/Info about CCCP
http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
(FWIW... it is always preferable, if you create a system restore
point before installing any software or updates)FWIW... it may be useful to convert .mov files
to a different format.MOV is the format QuickTime from Apple and the
Software «QuickTime 7 Pro» allows to convert MOV files...
(this is the commercial version, not freeware)QuickTime 7 Pro
http://store.Apple.com/us/product/D3381Z/AInstructions for the conversion of the .mov files are on
page 42 of the .pdf document
"Exporting files with QuickTime Pro".QuickTime 7.6 user guide
http://images.Apple.com/QuickTime/PDF/QuickTime7_6_User_Guide.PDFOr... you can use the following to freeware
convert .mov files to .avi format and
import into Windows Movie Maker for
combine them into a single video file .wmv or .avi.Pazera Free MOV to AVI Converter
http://www.Pazera-software.com/products/mov-to-AVI-Converter/
(click on the blue Download button not the Red)The name of the file that you download is:
'Pazera_Free_MOV_to_AVI_Converter.zip '.After you download... Unzip and open the program...
(no installation required)Drag and drop one or several .mov files...
Choose an output directory...
Select... WMV AVI - Video Codec - version 1 (WMP 7)...
Convert... (the button is on the top tool bar)
When the file is converted, you can change it in
Windows Movie Maker. Simply open Movie Maker
and go... File / import into Collections... and
Access your converted file.Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Create folders and move files by reading csv
Hello guys,.
That can create a script to read csv and create folders and move files into the folder.
My csv will look like
There the names of folders and file names, I kept my files (Mention in the 'File name' column) in the office. When I run the script it must read the csv file and create the folder (depending on the "folder names") and the correct file must move in the particular folder. Hope I have clear requirements.
So we need 4 above csv files and the respective files must travel in their records. Need help!
Thing may have changed as I've tested with CS6.
Please try then.
#target photoshop; main(); function main(){ var csv = File.openDialog("Please select CSV file.","CSV File:*.csv"); if(csv == null) return; var sourceFolder = Folder.selectDialog( "Please select source folder"); if(sourceFolder == null) return; var data=[]; csv.open('r'); while(!csv.eof){ var InputLine = csv.readln(); if(InputLine.length > 3) data.push(InputLine); } csv.close(); for(var f in data){ var dataLine = data[f].split(','); var folderName = dataLine[0].toString().replace(/^\s+|\s+$/g,''); var fileName = dataLine[1].toString().replace(/^\s+|\s+$/g,''); var file = File(sourceFolder + "/" + fileName); if(!file.exists) continue; var outputFolder = Folder(sourceFolder + "/" + folderName); if(!outputFolder.exists) outputFolder.create(); if(file.copy(outputFolder + "/" + fileName)) file.remove(); } alert("All Completed"); };
-
Move files using the Action Wizard
Is it possible to move files from one folder to another on a network using the Action Wizard, I want to be able to move files to another folder, and then run OCR and other actions.
N ° the Action Wizard cannot move or delete files his treatment.
-
How to download multiple files in a folder.
I tried to download my Web site on the cloud, in the main folder, I have a CSS file and Images and subfolders in those. When I click on download and choose the main folder it downloads only the items outside a folder. I creat of each file, it is not download separately and then rebuild the content. There must be a better way. I tried to drop and drag, but it did not work. I use Windows 7 and Chrome.
You cannot download files to the web service, a few files.
You can create folders in the web client in the Actions menu and then upload files to them or move files to a folder after downloading.
Once the available synchronization application folder again June 17, you will be able to synchronize folders to the top.
-
bad move files in lightroom 2.5
I can't solve a problem with moving the files in Lightroom 2.5. While in the program, can not drag and drop images from one folder to another. If drag and drop IE (Windows Vista) and then go back into Lightroom 2.5, catalog do not update or acknowledge the move was done. I resynchronize the files each time.
From the video tutorials I've seen, it should be capable of these very simple things. I'm still new to LR and learning but can't seem to go beyond that. Is this a bug or installation problem? Don't know what Miss me, but he's driving me crazy, would appreciate any help.
Sincerely,
Bob
I can't solve a problem with moving the files in Lightroom 2.5. While in the program, can not drag and drop images from one folder to another. If drag and drop IE (Windows Vista) and then go back into Lightroom 2.5, catalog do not update or acknowledge the move was done. I resynchronize the files each time.
When you want to place a picture in another folder in LR, you must drag the thumbnail, not the rectangle around the thumbnail.
Lightroom can not find the new location of photos installs under Windows. Just not a feature of this program. Therefore, you are better off to make the journey in LR.
From the video tutorials I've seen, it should be capable of these very simple things. I'm still new to LR and learning but can't seem to go beyond that. Is this a bug or installation problem? Don't know what Miss me, but he's driving me crazy, would appreciate any help
I don't know what tutorials you watch, but as I said, the location of files that have been moved in Windows is not a feature/capability of Lightroom. You have to point Lightroom to the new location of the photo, or better yet, place the photo in LR. Or, better still, not to move photos from one folder to another, rather to browse your photos in Lightroom, using keywords, metadata, and collections (rather than folders) as a method of organization.
-
Hello
I have the .mov file a customer to use on a project, when I play the video with Windows media player games without a problem.
Then tried to import in first, but the file is incomplete! one minute and 14 seconds from the beginning are missing!, this isn't a question of creation, because I tried Adobe Encoder, VLC and Quicktime even with the same problem, the video is not complete, only wmp can play full.
I tried on 2 different computers with the same result.
Someone had such unusual behavior with a .mov? How to solve this problem?
Thank you!
Hi Bubbartlock,
Transcode / convert this video with a video converter. (Try the Handbrake)
Let me know if that makes a difference.
Thank you
Ilyes Singh
-
5.7 Lightroom will not install on a clean install of Windows 10 Pro 64 bit. "Problem retrieving some files. "Check available space, etc. and the privaleges of Scripture on the destination folder. Worked OK on Windows 7 64 bit. 400 GB of available space. Tried changing the compatibility of Wiindows 8 and 7, but same problem. I am the administrator, so there should be no problem of privileges.
Clear your tmp folder.
Restart your computer
replace.
Maybe you are looking for
-
Apple TV plays with a surround sound
Are there games current APPLETV with native audio 5.1 or 7.1?
-
HP Pavilion 8750: PCI Wireless card
In fact, the operating system is Windows Millennium Edition. am I right that there is no compatible with this machine wireless card?
-
Link to BIOS 1.50 for Satellite C660D-13 q does not (404 error)
Hello Link to 1.50 BIOS for Toshiba Satellite C660D-13 q does not (error 404) - file not found.How can I get this file after all? Who should I contact for this?Any help email address? Thank you
-
HP ak007tx games go to the SSD?
Can I add an ssd in hp ak007tx with hard drive?
-
What is the best Instagram app to use on a Mac book pro
HHey guy What is the best App Instagram for use with MacBook Pro I downloaded two and they do not have the possibility to edit and publish on your profile