Lightroom can't write in the following directories

Similar Questions

• RW-00000: cannot write in the following directory. Please check the permissions. Failed to create the context to the/tmp file

  Hi, I'm under RapidWiz 12.2.0.50 to make a R12.2 installation on a platform for x 86-64 Oracle Linux 7.1.

  I get the error message

  RW-00000: cannot write in the following directory. Please check the permissions. Failed to create the context to /tmp/11061511/lab3_DEMO1_db.xml file

  However I've looked at what my directory/tmp is completely open (wise authorization), as well as the subdirectory 11061511 under

  lab3-nms: / > ls - al

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22 tmp

  lab3-nms: / tmp > ls - al

  Total 16

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22.

  drwxrwxrwx. 19 root root 4096 Nov 6 14:19...

  drwxrwxrwx 2 root root 25 Nov 15:11 6 11061511

  drwxrwxrwx. 2 root root 19 6 Nov 14:18 .esd-0

  drwxrwxrwx. 2 root root 6-9 Oct 23:16 current unix

  drwxrwxrwx. 2 root root 17 6 Nov 15:11 hsperfdata_root

  drwxrwxrwx. 2 root root 14:18 Nov 94 6. ICE-unix

  drwxrwxrwx 2 root root 23 6 Nov 14:18 ssh-KQeDztQLkQHj

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-OgJMdJ

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-S5pkDq

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-x5Iry2

  drwxrwxrwx. 2 root root 6-9 Oct 23:16. Test-unix

  -rwxrwxrwx 1 root root 11 6 Nov 14:18. X 0-lock

  drwxrwxrwx. 2 root root 24 6 Nov 14:18. X 11-unix

  -rwxrwxrwx 1 root root 11 6 Nov 14:18. X 1-lock

  drwxrwxrwx. 2 root root 6-9 Oct 23:16. XIM-unix

  lab3-nms: / tmp/11061511 > ls - al

  Total 16

  drwxrwxrwx 2 root root 25 Nov 15:11 6.

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22...

  -rwxrwxrwx 1 root root 8529 6 Nov 15:22 11061511.log

  any ideas what the permission problem?

  Thank you

  Jim

  Found the problem and it's nothing to do with users, groups, and permissions of files (tmp or anything else besides!)

  The problem was that I had not put the sysconfig according the upgrade installation Notes & R12.2 for Linux x 86-64 ( note 1330701.1 )

  I guess the bum steer, which gives install them quick - is indicating that the question is a problem of permission of the files in / tmp, when it is not really!

  The only thing I can think is that it uses sysconfig content to add the name of host or domain, the file name, he tries to put in / tmp.

  hope this helps

  Jim

• Why I can not write in the contact form?

  I use the widget simple contact form. Unfortunately, when the site has been uploaded to the server, I can not write in the form.

  Anyone have an idea why?

  Thanks for the reply,

  Angelika

  Your page uses a 3rd party widget that adds some javascript to try to block the right mouse clicks - which interferes with by clicking on the form in firefox. I suggest you remove this widget or by contacting the promoter to see if they have an updated version that works with the forms of the Muse in firefox.

• Can't access to the following endpoint: (external Web service)

  Hi all
  
  I'm trying to connect to a web service using WSDL, which is given by the osm, using Oracle SOA.
  I created the emconsole key file and created the user in adminconsole and applied the wss_http_token_client_policy to this webservice. When I try to connect to the Oracle SOA web service, I get exception below:
  
  < env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env >
  < env:Header / >
  < env:Body >
  < env:Fault >
  env:Server < faultcode > < / faultcode >
  oracle.fabric.common.FabricInvocationException < faultstring >: can't access to the following endpoint: http://hostname/osm/wsapi < /faultstring >
  < faultactor / >
  < detail >
  < exception > unable to access to the following endpoint: http://hostname/osm/wsapi < /exception >
  < / details >
  < / env:Fault >
  < / env:Body >
  < / env:Envelope >
  
  Can someone help me in problem solving.
  
  Thanks in advance,
  Ajay
  
  Published by: Ajay8706 on October 18, 2012 23:36

  Try the wss_username_token_client_policy

  Check here: BPEL to invoke the secure with HTTP Basic authentication Web service

• can someone help with the following code plsql errors...

  Hello

  If anyone can help with the following code... to get a successful outing.

  create or replace package lib_01 as

  procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2);

  end lib_01;

  create or replace package body lib_01 as

  procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2) as

  number of v_user_id;

  v_user_name varchar2 (50);

  number of v_avl_books;

  number of v_avl_days;

  date of v_end_date;

  date of v_return_date;

  Start

  dbms_output.put_line ('Enter User Name');

  dbms_output.put_line (' username :'|| p_user_name);

  Select user_id, user_name in v_user_id v_user_name of user_registration where user_name = p_user_name;

  If v_user_name <>p_user_name then

  dbms_output.put_line (' username is not.) Please submit full name ');

  end if;

  If v_user_id is null or v_user_name is null then

  dbms_output.put_line ("' user not found");

  validate_userLogin;

  on the other

  validate_issuedbooks (p_issuecount);

  end if;

  If v_issuecount < v_avl_books then

  issuebooks;

  on the other

  Number of return of late_fee (p_mem_id, p_extradays, p_latefee_total);

  end if;

  If paid_flag = "Y" then

  issuebooks;

  on the other

  dbms_output.put_line ("' book may be issued due to its maximum reached late fees");

  end if;

  end lib_proc01;

  procedure validate_userLogin is

  procedure reg_proc is

  procedure user_validate (p_id_proof in varchar2, p_id_no out varchar2) is

  v_id_proof varchar2 (20);

  v_id_no varchar2 (20);

  Start

  Select user_name, id_proof, id_no, v_user_name, v_id_proof, v_id_no of user_registration where id_proof = p_id_proof;

  If v_id_proof = "Adhar_Card" then

  dbms_output.put_line ('user a valid proof of ID');

  dbms_output.put_line (' and the id no. :'|| is p_id_no).

  on the other

  dbms_output.put_line ('Invalid ID evidence.) Please submit valid proof of ID ');

  end if;

  exception

  When no_data_found then

  dbms_output.put_line ('No Data found');

  end user_validate;

  procedure member_validate (p_mem_id series)

  v_mem_flag char (1);

  curr_date date: = sysdate;

  date of v_mem_enddate;

  Start

  dbms_output.put_line('Mem_flag:'|| v_mem_flag);

  Select mem_flag in the v_mem_flag of user_login where user_id = v_user_id;

  If v_mem_flag = 'n' or v_mem_flag is null then

  dbms_output.put_line ('The User do not have membership');

  on the other

  Select mem_id in the v_mem_id of user_login where user_id = v_user_id;

  dbms_output.put_line ('the user has membership');

  v_mem_id: = p_mem_id;

  Select mem_enddate in the member_login v_mem_enddate where mem_id = v_mem_id;

  If v_mem_enddate < curr_date then

  dbms_output.put_line ('Membership has expired' | v_mem_id |' on ' | v_mem_enddate);

  on the other

  dbms_output.put_line ('User a validity again' | v_mem_enddate);

  end if;

  end if;

  exception

  When no_data_found then

  dbms_output.put_line ("' no data found");

  while others then

  dbms_output.put_line (' another error.) Please find");

  end member_validate;

  Start

  insert into user_registration values ('& first_name ',' & last_name', null, ' & user_type',)

  address_ty ("& bldg_no",

  '& bldg_name',

  '& Street',

  ' & city ",

  '& State',

  '& zip'

  ),

  user_phone ',' & user_mail ',' mem_idproof', ' & id_no');

  Dbms_output.put_line ('user is properly registered');

  exception

  When no_data_found then

  dbms_output.put_line ("' data not found");

  end reg_proc;

  Start

  Dbms_output.put_line (' enter ID or user name ');

  Dbms_output.put_line (' username: ' | p_user_name);

  If v_user_name is null then

  Dbms_output.put_line ('user not found');

  reg_proc;

  Insert user_login SELECT user_id_seq. NEXTVAL, user_name, NULL, mem_id_seq. NEXTVAL, user_type FROM user_registration WHERE user_name is lower (p_user_name);

  Dbms_output.put_line (' because the user wants to have the membership? ");

  Dbms_output.put_line ('If Yes, please pay dues");

  INSERT INTO member_login SELECT mem_id_seq. CURRVAL, SYSDATE, SYSDATE + avl_days, 500, 'Y' of user_login ul, bl book_loan WHERE ul.mem_type = bl.mem_type AND user_name = p_user_name;

  END IF;

  exception

  When no_data_found then

  dbms_output.put_line ("' no data found");

  When too_many_rows then

  dbms_output.put_line (' too many lines).

  END validate_userLogin;

  procedure validate_issuedbooks (p_issuecount series)

  number of v_issuecount;

  Start

  Select user_login u, bl book_loan, avl_days, avl_books in v_avl_days, v_avl_books where bl.mem_type = u.mem_type and user_id = p_user_id;

  SELECT count (case when end_date < end return_date then p_mem_id) as invalidcount in v_issuecount from book_count where mem_id = p_mem_id;

  v_issuecount: = p_issuecount;

  dbms_output.put_line (' no. books that the user contains the :'|| p_issuecount);

  end validate_issuedbooks;

  procedure issuebooks is

  procedure book_avl (p_avl_now_flag in p_avl_date Boolean, date) is

  v_avl_now_flag char (1);

  date of v_avl_date;

  procedure reader_bookissue is

  Start

  insert into values drive (p_user_id, v_book_id, sysdate, sysdate, null);

  insert into book_count values(p_mem_id,v_book_id,sysdate,sysdate,null);

  Update book_availability set issued_to is "Reader" where book_id = v_book_id;.

  end reader_bookissue;

  Start

  Select book_name, b.book_id avl_now_flag v_book_name, v_book_id, v_avl_now_flag of the book b, book_availability b where b.book_id = ba.book_id and ba.book_id = p_book_id;

  If v_avl_now_flag = "Y" then

  dbms_output.put_line ('the book is available for issuance' | v_book_id);

  on the other

  Select mem_type in the v_mem_type of user_login where user_id = (select user_id from book_availability where avl_now_flag = 'n' and book_id = p_book_id);

  If v_mem_type = "Reader" then

  reader_bookissue;

  dbms_output.put_line (' the book is with Reader.) Please try tomorrow.') ;

  on the other

  dbms_output.put_line ('the book is member');

  end if;

  Select avl_date in the book_availability v_avl_date where book_id = p_book_id;

  v_avl_date: = p_avl_date;

  dbms_output.put_line (' the available date is: ' | p_avl_date);

  end if;

  end book_avl;

  Start

  insert into book_count values(p_mem_id,p_book_id,sysdate,sysdate+v_avl_days,v_return_date);

  Update book_availability set book_id = p_book_id, avl_now_flag = 'n', avl_date is to_date (sysdate + v_avl_days,' dd-mm-yyyy ""), issued_to = v_mem_type, user_id = p_user_id where mem_id = p_mem_id;

  commit;

  dbms_output.put_line ("' the book published successfully");

  end issuebooks;

  Number of function return late_fee (p_mem_id in number, p_extradays series, p_latefee_total number) is

  number of v_extradays;

  number of v_latefee_total;

  number of v_latefee_per_book;

  number of v_latefee_per_day;

  number of v_book_count;

  Start

  Select trunc (sysdate) - v_end_date in v_extradays from book_received where mem_id = p_mem_id and book_id = p_book_id;

  p_extradays: = v_extradays;

  v_latefee_per_book: = v_latefee_per_day * v_extradays;

  v_latefee_total: = v_latefee_per_book * v_book_count;

  p_latefee_total: = v_latefee_total;

  dbms_output.put_line ('The total AMT for not returned books' | p_latefee_total);

  end late_fee;

  end lib_01;

  Hello

  I checked the first 10 lines after the beginning and I could count already several errors.

  Is it an exercise or a real code, you must provide?

  Kind regards.

  Alberto

• How can I write to the spreadsheet or measurement produce the following signals

  Hi friends!

  I wonder how to write in file worksheet or to measure 1 and 0 of my assistant DAQ on this VI:

  It's the same VI like this: http://zone.ni.com/devzone/cda/epd/p/id/6405

  Hey,.

  You place the measurement file Express VI on your blockdiagram write and pull a cable since it's 'signals input terminal' to 'data' of the DAQ Assistant Terminal. Like this:

  

  Christian

• Can not write in the MySQL table

  I could not write a record in the database table MySQL; tried many lines of PHP code without success so something must be missing.

  The lines above the statement if(!testErr) { -other tests of the data entry on the form and all works are correctly.}  If for any reason any test of fails entry, the $tester is set on ' t "and the user is returned to the form.

  Otherwise what follows must be executed.

  To check, I added the lines of $_SESSION upstairs to make sure that the reactive power ($taker and $purpose in the $sql = statement are met.)

  When the / * connection attempt sequence is performed and $_SESSION are not present, no data is written to the table.

  When the $_SESSION are included with the code writing table, the resultant 'success' header ('Location: '.) ("' inv_post.php"); this page from the mistakes (invalid index in $taker = $_SESSION ['takers'].)

  When the $_SESSION are executed but not the code writing, the page of success running the echo $taker and $purpose properly.

  Best regards and thank you as always.

  Tom Smith

  Here is my code.  if(!testErr) is located in the - If ($_SERVER ['REQUEST_METHOD'] == 'POST') {} -section of the code

  If (! $testErr) {}
  $_SESSION ['takers'] = $taker;
  $_SESSION ['purpose'] = $purpose;
  / * Attempt to connect to the MySQL server.
  $link = mysqli_connect("localhost","root","","112fielda_sitemgt");
  
  Check the connection
  if($Link === false) {}
  Die ("" ERROR: can not connect. ".") mysqli_connect_error());
  }
  
  Attempt to insert the running queries
  $sql = "INSERT INTO bev_inventories
  (bev_inv_id, bev_inv_taker, bev_inv_purpose)
  VALUES
  (null, $taker, $purpose) « ;
  If (mysqli_query ($link, $sql)) {}
  echo "Records added successfully.";
  } else {}
  echo "ERROR: could not able to run $sql.» mysqli_error ($Link);
  }
  
  Close connection
  mysqli_close ($Link);
  */

  Header ('Location: '.) ("' inv_post.php");
  }

  David:

  Accidentally solved the problem.  Reactive power ($taker and $purpose) need single quotation marks (') around them.

  Attempt to insert the running queries

  $sql = "INSERT INTO bev_inventories

  (bev_inv_id, bev_inv_taker, bev_inv_purpose)

  VALUES

  (null, "$taker", "$purpose") « ;

  I've never seen samples written in this way!

  (BTW, heard your response, but setting them I did was to be able to recall them in the success page so I know that they have not removed during the INSERT operation.)  )

  Kind regards

  Tom Smith

• After the upgrade to El Capitan I can't write on the external hard drive to NTFS format more

  I have an external hard drive formatted in NTFS, I used some Mavericks and could read and write on it without problem, after I installed El Capitan today I can't do more, not this external hard drive is read-only. The problem is that it is full of my data and I can't just format as journaled. What I can do and why it worked fine before?

  You need to upgrade or replace the software you used to write on NTFS volumes and should put a copy of your data to a second drive in case one you have fails for any reason unrelated.

  (140448)

• How can I write to the data file only near the SW trigger samples?

  Hello world

  I'm working on a model in this one:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/34#0requirements

  I would like to save the data once the trigger is reached, with some data near the impact.

  Where should I put a "write on a file of measurement" block so can load and draw a shock test data?

  Kind regards.

  Celuti,

  You're so close!

  I am happy to see that you have understood what I recommended!

  You must ensure that you connect the same type of data in the queue as what comes from the acquisition of data.

  Please see the amended version of the code you have posted.

  Craig

• My computor can't find my log file can't download can not write to the log file

  "' my computor cant found my profile so it connects me on different everytime I turn on my computor and can't download and cant wright for the newspaper and ID 439 Source file" ESENT "he says:

  Hi patriciarangel,

  1. you receive an error message when you connect to other profiles?

  2. What is the exact error message you are getting?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.

  See the link below:

  How to ask a question

  http://support.Microsoft.com/kb/555375

• Windows (Vista) can not start because the following file is missing or corrupt: &#60; root windows &#62; \system32\ntoskrnl.exe

  When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt: \system32\ntoskrnl.exe. Please reinstall a copy of the above file.

  I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.

  I tried to restore my computer and there is no restore point.

  I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:

  1. Turn on your computer and insert the CD or the DVD of Windows Vista.

  2. Install Windows page, follow all of the instructions that appear, and then clickInstall now.

  3. On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.

  6. Follow the instructions on each page. On the type of installation do you want? page, clickCustom.

  7. On the place where you want to install Windows? page, select the partition where you want to install.

  8. Click next to begin the installation. You can see a compatibility report.

  and then had this error that says;

  windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.

  Now I am stuck and don't know what to do.

  Someone at - it solutions for me. Help, please.

  Hello

  1. on which the drive was initially installed OS?
  2. What partition you selected to install Windows?

  You can try to perform a startup repair by using the Vista installation disc.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions  

  How can I fix a startup (startup)?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem 

  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly 

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista 

  If nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.

  Kind regards
  Afzal Taher - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can you write in the script of the OIDC today

  Hello
  
  I'm trying to compare date. Can anyone help me on how to write today.
  
  For example: <! - $if xEventEnd - >
  
  What I try to do is if xEventEnd is less today, displayed no content.
  
  Thank you

  <$dateCurrent()$>

• Create the table and take the name of user who can read/write on this table

  Dear gurus,
  
  I need to add the following column in Oracle 11g DB AND also add the name of user who can read/write ONLY the following table, any table to access the same read?
  
  I use to go to Oracle PL/SQL client.
  
  My dbname is 'customerdb '.
  
  TableName: "extractOrders."
  
  +: example of the field data.
  Column0 = logID: 1
  Column1 = idNumber: 39D13613-F061-D38D-100A-16536409C6D8
  Column2 = timestamp: 2011/07/11-13:45
  Column3 = resultCode: 40509
  Column4 = resultMessage: could not find the IDENTITY card
  Column 5 = number: 9813080808
  Column6 = iid: 87670200100001466100
  Column7 = products: D1430 | "' S1412 ' | "" S1407 | "' S2607 ' | "' S1417 ' | "" S1411 | "' S1413 ' | "" S1502 | "" S1406 | "' S1522 ' | "' S1524 ' | "' S1474 ' | "" S1473 ".

  user596669 wrote:

  I need to add the following column in Oracle 11g DB AND also add the name of user who can read/write ONLY the following table, any table to access the same read?

  I use to go to Oracle PL/SQL client.

  Let's say your table than extractorders is the schema of database clientsproperty.

  As this pattern create a stored procedure that runs with the privileges of the customerschema. Having this procedure return a ref cursor For example

  create or replace procedure ReadExtractOrders( c in out sys_refcursor ) authid definer is
  begin
    open c for select * from extractorders;
  end;
  

  As this code executes with the privileges of the customer schema it can read the table belonged to this scheme.

  Now give execute rights on this process for the Joe database schema - and this pattern can create a cursor on the table of ExtractOrders , without being able to access or use directly or refer to this table. Read access to this table is therefore protected by a reliable code belonged schema customers.

  Learn about the AUTHID clause and how it can be used to differentiate the code approved and non-approved, which allows to PL/SQL code to run with different privileges than the demand for prescriptions.

• Unable to write to the directory root on cRIO

  I need to create a folder in the root directory of my cRIO but when I try to do it via the web interface (Silverlight) it gives me an error 403 (refused).  I can create and edit files and directories in existing files located in the root directory.

  The seller has managed to create a new folder in the directory root on our previous cRIO, but now we are trying to set up another one on our own.  They told me that they don't have to do something special that they do not forget to create this folder.

  Any ideas as to why I wouldn't be able to do this, even if I have all permissions on the device?

  It's confusing, but "all permissions" web interface are only "all permissions for the web server has permissions for things", that's not all. See http://digital.ni.com/public.nsf/allkb/4EBE45E8A816B19386257B6C0071D025 - more precisely:

  Write access

  (ETS, VxWorks) Your target provides write access to its folders and files.

  (OR Linux in real time) If you want to modify or create new folders and files on your target, you can only do in the following directories:

  • /home/webserv
  
  
  • /home/lvuser
  
  
  • /tmp

  Note: Your target deletes the content in the temporary folder /tmp on target restarts.

  Restricting access to the root directory makes the system more robust (prevents the change of important system files).

• transfer lightroom 5 computer dead to the new computer

  Old computer with Lightroom5 installed is dead. Bought new computer and want to install LR5.  How?

  You can download Lightroom 5.7.1 from the following Web site and use your existing serial number to install and activate:

  Updates