Lightroom CC (2015) does not recognize the lenses since the last update

Similar Questions

• I just bought 6 of Lightroom. It does not recognize the RX10II sony raw files.

  I just bought 6 of Lightroom. It does not recognize the RX10II sony raw files.  (RAW ARW file type).   I checked the web site of Adobe, it says version 6.1.1 LR. reads the ARW files.    6.1.1 seems to be only available in CC.  Is this correct?  My purchase was a waste of money?

  Advice please.

  Lightroom 6.1.1 isn't Lightroom CC. Lightroom 6.1.1 is a stand-alone version and not required Lightroom CC. This is a free update to the version you have now. Download the last 6.3 maintenance of Lightroom Lightroom

• Adobe InDesign CC 2015 does not recognize as a valid plugin - after update of the SDK 8.0.0 to 11.0.0

  Hi all

  I worked on SET a CS6 plugin to CC2015 (8.0.0 on 11.0.0). SDK

  After you get the code to compile against the new SDK, when I try to load, I get the following message:

  Adobe InDesign does not recognize PLUGIN_NAME *. PLN as a plug-in...

  

  Any thoughts?

  Thank you

  Ido

  Hi David,

  InDesign CC 2015 is available in 32-bit and 64-bit. You must create your plugin as the two versions. Have you checked that?

  Markus

• Lightroom 6 PC does not recognize the serial number and has disabled the module development

  I bought Lightroom 6 at Amazon and initially installed without problem. Recently, he started saying that my trial is about to expire. I had uninstalled the trial before installing the original. Now it's saying my trial has expired and has disabled the develop module.

  I tried to get my serial number, but it has no effect and does not give error messages.

  I tried to uninstall. I tried to re - download the app on Amazon. Nothing works. I get just this screen:

  

  It is not necessary to uninstall the trial version before installing the "full" version, because there is no difference in the programs. It is virtually the same program. Enter a valid serial just cancel the limitations of the trial. Your installation seems to act as creative cloud installation. My recommendation would be for you to uninstall completely, including the creative application manager if it is still installed. Download the latest update from the following Web site, and then install it. Use this serial number to see if it will activate.

  Update of Lightroom

• Adobe Lightroom 5.7 does not recognize the Canon 60 d raw files. I have the plugin installed Camera Raw 8.7. Is there a solution?

  CS6 Bridge or Lightroom 5.7 can recognize the Canon raw (Canon 60 d camera) file.

  It started a few months without change I made to the system

  Clues?

  I think I found the answer - EOS Utility was running in the background and the 60 d can 'talk' more than a software download. After you have uninstalled the EOS Utility, things seem to work.

  Thank you all for helping solve the problems.

• Automatic update system does not recognize the successful update.

  Regarding automatic updates.  I have 36 log entries to show the successful update of Windows Vista with Service Pack 1.  However, at least twice a day, I receive notifications that Windows Vista SP1 KB936330 is an important update, available for download.  How can I make the system of automatic updates (which I run my endorsement) recognize that this update is complete?

  Hi Dalbro1,

  Welcome to the Microsoft Answers site!

  You need to uninstall all installations of Service Pack 1 on your computer and install the standalone service pack1 manually.

  To uninstall the service pack use utility Windows install cleanup, which will remove all facilities from your computer.

  To install Windows Install Cleanup Utility follow the below given link.

  Description of the Windows Installer CleanUp utility

  http://support.Microsoft.com/kb/290301

  Manually download and install visit Service Pack the below given link.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

  If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  For more information about the clean boot, follow the below given link: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Capture of Lightroom CC attached does not recognize the Nikon D750 & D7100

  Why does my copy of LR CC detect my Nikon D750 and D7100? The Mac detects and I can shoot tethered. The LR says: camera not detected. »

  Hi Ruyooka

  What is your operating system?

  Please see Lightroom and El Capitan | Mac OS 10.11 if you use MAC OS X El captain.

  Concerning

  ~Assani

• Creating cloud App does not show the last updated on After Effects

  1. Works on Mac OS X 10.9, German
  2. New CC installed again. German as default language
  3. Applications are displayed in the form of updates, no more than left.
  4. Start after effects CC, he tells me that I am using AE 12.0 CC and that this version is not running.
  5. I go to the download page for Adobe for upgrades http://www.Adobe.com/support/downloads/thankyou.jsp?ftpID=5675 & starts = 5686
  6. There is a newer version of AE

  Why the CC application not shows any upgrade to After Effects, even if it's the only way to run this program on Maverick?

  Hi Mrs. Willi Adelberger,

  Please see the Ko: http://helpx.adobe.com/after-effects/kb/effects-launch-mac-os-109.html.

  Kind regards

  Romit SInha

• My version of Lightroom does not recognize the RAW Olympus Pen - F file

  My version of Lightroom, 6.3, does not recognize the RAW Olympus Pen - F file. When an update that contains my new camera? Thank you

  Yes, version 6.6 will support raw files.

  Of course, you can test and report.

• Backup does not recognize the previous backup CD

  When you click on backup:

  1. backup does not recognize the last backup cd. The only beginning of path to create a shadow copy backup is to insert a blank disc. How can I fix it?

  2 ive run backup from one day to the next day while he created a cliché. In the morning, it is only 1/5 complete suggesting that it is not working properly. I canceled the backup. How can I fix it?

  3. If I try to do another backup he asks the cd of your previous (cancelled backup) despite the fact that it was cancelled and the cds do not exist. How to reset to ask these latest records backup?

  Since then, I have downloaded all windows updates but the problem persis

  Thank you, Kel

  You mean by cliché, creation of backup image, right? Shadow copy volume is not Windows Backup.

  If you canceled the backup Windows is trying to finish the last backup. It's normal.

  All over again, trying to backup in a different medium, an external HARD drive.

  At first is a stop at the backup in progress"

  1. Restart the computer
  2. Run as administrator command prompt and run this: wbadmin stop job
  3. Typing sdclt.exe in command prompt and click on change settings
  4. Connect your external HARD drive or DVD
  5. If changing the settings is not available, then click on set up automatic file backup
  I hope that it will work. Please let me know the results to help others.

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

  I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

  If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

  Lightroom Journal | Tips and advice straight from the Lightroom team.

• I bought a Nikon D7100. Lightroom does not recognize the Nef Raw files what I am doing wrong?

  I bought a Nikon D7100. Lightroom does not recognize the Nef Raw files what I am doing wrong?

  Thank you for your response. I solved the problem by simply importing the

  images using windows rather than the Nikon transfer.

  In a message dated 09/03/2015 20:00:49 Hawaiian Standard Time,

  [email protected] wrote:

  I bought a Nikon D7100. Lightroom does not recognize Nef Raw files

  what I am doing wrong?

  created by BKKDon (https://forums.adobe.com/people/BKKDon) in Photoshop

  Lightroom - see the discussion complete

  (https://forums.adobe.com/message/7270711#7270711)

• Lightroom cc 2015 does not start after the recent update on Mac Pro Yosemite

  After you download the last updated September 27, lightroom does not start on my mac.

  Used to work without problems so far.

  Tried to disconnect the last clouds and again without success.

  Thanks, that worked.

  Now, I have to do the update again hope that will work as well...

  Do you have any idea what caused the problem?

  Concerning

  Christian

  MIT thank wurde

  Hans Christian Behrendt

  2015-09-30 18:07 GMT + 02:00 rpandita [email protected]>:

  Lightroom cc 2015 does not start after that a recent update on Mac Pro Yosemite creates

  by rpandita https://forums.adobe.com/people/rpandita> in * Photoshop

  Lightroom *-see complete discussion

  https://forums.Adobe.com/message/8015642#8015642>

• 6 Lightroom does not recognize the raw files of Nikon D800

  I have a nikon D800 and Lightroom does not recognize the raw files yet of this camera.  I've updated the LR software to 6.1.1 yet still cannot import files.

  Can you help me

  Thank you

  Ruben

  The D800 has been supported since Lightroom 4.1.

  You use an earlier version of the Nikon software to transfer files from camera to computer? Older versions are known to make Raw files unreadable by Adobe software.

  Try to download a version update of Nikon. Or use a different card for example reader method.

• 2015 CC Photoshop does not recognize the graphics card GeForce 850 M

  The NVIDIA Control Panel settings do not solve the problem. When I use global settings, Photoshop recognize only the Intel card:

  

  
  

  
  

  And when I put "High Perfomance... ", Photoshop does not recognize the graphics processor (the processor settings graphic is completely disable):

  
  

  
  

  Adobe Photoshop CC GPU (graphics processing unit) and card FAQ video