Judgment of

Similar Questions

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• Whenever I stop my PC a blue box appears and says judgment of shape Base2pane

  Original title: Base2paneform must close the problem at the end.

  Whenever I close my PC a blue box appears and says judgment of form Base2pane. Can someone explain what it is and or if I can fix it? Please, I beg you.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. do you have installed HP digital imaging software? If yes then update this software.
  4. what the complete and exact error message?

  Control of the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Judgment of spooller Vista. Why? How to start?

  Judgment of spooller Vista. Why? How to start?

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Judgment of NAC Manager HTTPS response after activation of the AH

  Judgment of NAC Manager HTTPS response after activation of the AH

  I have currently NAC installation in a lab, and as soon as I restart the Manager after you have configured the AP server stops responding to HTTPS and I got Service temporarily unavailable. After restarting the server I saw something console to check the HA setting but I not see this message again and I don't know how to check these parameter in CLI.

  Hello

  This may mean that HA is not correctly configured (problem with certificates, heart rate, etc.).

  The best thing to do is to connect via SSH for both cams, go to /etc/ha.d/ and delete the files: 'perfigo.conf' and 'ha.cf.

  These are the files that contain the HA configuration, if, after deletion, restart the machine and they will come as stand-alone upward again.

  As a stand-alone, you can HA startover config again, ensuring that you follow the steps required:

  http://www.cisco.com/en/US/docs/security/nac/appliance/installation_guide/hardware/48/hi_ha.html.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• my judgment of window 7 and work in the winder on cone left it says build 7601 this sopy of window is not genuine I don't know what to do?

  my judgment of window 7 and work in the left corner, that he says that this copy of window is not genuine how much - what I have to do?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.

  Click on the button continue, after a short time, continue button will change to a copy button.

  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message. (please do not change the report.)

• The system has rebooted without judgment properly first. This error can be caused if the system is unresponsive, is crashed or lost power unexpectedl

  Im having problems with my new rig. All of a sudden it stops working when I just run windows, it can takes minutes to BSOD or seconds.

  I checked the event viewer and that's what I have.

  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Computer: Sprutmunn
  Description:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
  The event XML:
  
   
     
      41
      3
      1
      63
      0
      0 x 8000000000000002
     
      1370
     
     
      System
      Sprutmunn
     
   
   
      10
      0 x 0
      0x2
      0 x 1
      0xfffff802e1ccb722
      0
      0
      0
   
  

  IM, including the dmp so file--> https://www.dropbox.com/s/9srgscrrwm96jeq/060814-6578-01.dmp

  I hope some of you guys can help me, ill be happy for all the advice you can provide.

  Thank you

  TJ

  This phenomenon was related to iaStorA.sys Intel Matrix Storage Manager driver from Intel Corp.  It is a buggy especially with SSDS driver or hybrid.  I'd install the most recent driver available, even if it is the same date that drivers become corrupt.

  If you have a SSD drive or hybrid don't forget to update the firmware and you really need to update to win 8.1, you will stop to get the updates bit of time if you do not have.

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\060814-6578-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 8 Kernel Version 9200 MP (8 procs) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
  Computer name:
  Core = 0xfffff802 'a 5088, 000 PsLoadedModuleList = 0xfffff802' 50b56aa0
  The debugging session: 17:49:48.785 Sunday, June 8, 2014 (UTC - 04:00)
  System Uptime: 0 days 0:01:33.409
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ............................
  Loading user symbols
  Loading unloaded module list
  .........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {0, 2, 1, fffff80250944722}

  WARNING: Unable to verify timestamp for iaStorA.sys
  ERROR: Module load completed but symbols can be loaded for iaStorA.sys
  Probably caused by: iaStorA.sys (iaStorA + 6710a)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: 0000000000000000, referenced memory
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000001, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff80250944722, address memory

  Debugging information:
  ------------------

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80250be2168
  GetUlongFromAddress: cannot read fffff80250be21f8
  Paged 0000000000000000

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! KeAcquireInStackQueuedSpinLock + 32
  fffff802'50944722 488711 xchg rdx, qword ptr [rcx]

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  BUGCHECK_STR: AV

  Nom_processus: System

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  DPC_STACK_BASE: FFFFF80251BE3FB0

  TRAP_FRAME: fffff80251bdd730-(.trap 0xfffff80251bdd730)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000000000000002 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffff80251bdd930 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff80250944722 rsp = fffff80251bdd8c8 rbp = fffff80251bddab0
  R8 = fffff80251bdd930 r9 = fffff880019a3800 r10 = fffff80251bdd870
  R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  NT! KeAcquireInStackQueuedSpinLock + 0x32:
  fffff802'50944722 488711 xchg rdx, qword ptr [rcx] ds:00000000'00000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff802508e3769 to fffff802508e4440

  STACK_TEXT:
  fffff802 '51bdd5e8 fffff802' 508e3769: 00000000' 0000000 a 00000000'00000000 00000000'00000002 00000000'00000001: nt! KeBugCheckEx
  ' fffff802 '51bdd5f0 fffff802' 508e1fe0: 00000000 ' 00000001 fffff802 ' 51bdd930 ffff38d7 '6a9e1d00 fffff802' 51bdd730: nt! KiBugCheckDispatch + 0 x 69
  fffff802'51bdd730 fffff802'50944722: fffff880 '0176610a 00000000 00000000' fffffa80' 0d4cdb90 00000000'00000002: nt! KiPageFault + 0 x 260
  ' fffff802 '51bdd8c8 fffff880' 0176610a: 00000000 ' 00000000 fffffa80 ' 0d4cdb90 00000000'00000002 00000000'00000000: nt! KeAcquireInStackQueuedSpinLock + 0x32
  fffff802'51bdd8d0 00000000' 00000000: fffffa80'0d4cdb90 00000000'00000002 00000000'00000000 fffffa80 0'c 770500: iaStorA + 0x6710a

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  iaStorA + 6710 has
  fffff880'0176610 has?              ???

  SYMBOL_STACK_INDEX: 4

  SYMBOL_NAME: iaStorA + 6710 has

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: iaStorA

  Nom_image: iaStorA.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 51fb0de8

  FAILURE_BUCKET_ID: AV_iaStorA + 6710 has

  BUCKET_ID: AV_iaStorA + 6710 has

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:av_iastora + 6710 has

  FAILURE_ID_HASH: {f733faf2-d2a8-1b11-9fa3-afbe5930de67}

  Follow-up: MachineOwner
  ---------

• best judgment for paragraph styles, object styles and character styles

  I want to learn the criteria difference and use of paragraph styles, object styles and character styles. I know how to use them, but know about the best judgment and context, when you use would be better. Can anyone recommend links? I've been using adobe. Please don't suggest books.

  Paragraph styles are whole paragraphs.

  Character styles are letters or isolated words. Do not use the long of an entire paragraph. Do not set all the attributes, only those who are different for the properties of the paragraph Style. Unlike Quark Xpress, in InDesign are character Styles used only for the difference of isolated words.

  Paragraph styles can include the character automatically Style: Styles, GREP, nested Styles, initial letters, chips automatic & numbers and line styles.

  Object styles , set the frame of the object. They include separate definitions of all of the object, the stroke and fill.

  Object styles can also be applied to images in a frame and groups.

  Object styles may also include in the following paragraph Style and a style of paragraphs in automatic way.

  Object styles have several categories, you can choose which category is relevant to apply. For example, it is possible to apply the first style object to give the stroke and fill and apply a different object style to format the corners only and then apply the next. (With this method last only the applied object Style is linked).

  Styles of the opportunity to make global changes in a document. If you build in a smart way, they are a huge time saver. They can be stored in the CC libraries or libraries with objects that are applied to them. If you have created once these styles, you can use them again, and with one or two clicks, you can make their own to new document.

  My recommendation: the habit of Styles, name them always with the same names that it helps you to be accustomed to them and to work faster, much faster.

  There are more models: Table Styles, Styles of cell, the Master Pages and color chart.

• I bought two Lightroom... One for Mac and one for Windows but Mac gives me problem... it happened in judgment and now it won't open upwards - and how that I associate my Mac purchase at a monthly payment as my Windows plan? Its a plan photograph b

  I bought two Lightroom... One for Mac and one for Windows but Mac gives me problem... it happened in judgment and now it won't open upwards - and how that I associate my Mac purchase at a monthly payment as my Windows plan? Its a plan of photography by Adobe (including lightroom and photoshop)

  Hi Robertc70810949,

  It is a digression of your technical question, but you haven't purchased two separate subscriptions for creative cloud? You are probably aware of this, but just in case you're not, a single Plan of creative photography cloud allows installation and activation on two computers. These computers can be two Macs, two windows, or one of each. See Adobe Creative Cloud FAQ for more information. Of course, you can have another reason to buy multiple subscriptions, but I wanted to clarify in case you can save yourself a little money.

  Kind regards

  Del

• VMware tools automate following a judgment?

  HI guys,.

  I'm currently updating of tools with a restart with the addition of the vShield driver using the automated installation with these advance options

  /S /v "/qn REBOOT = R ADDLOCAL = REMOVE ALL THE = Hgfs, WYSE, ThinPrint.

  What I would like to know if there is in any case told stop instead, I think not that this is possible with the standard MSI arguments but I'm wondering if PowerCLI could do?

  As far as I know, you're right, the judgment can be done in the MSI parameters.

  But you can control the entire process from a PowerCLI script, and you can stop the virtual machine when the update is complete.

  • Install the VMware Tools installation with the cmdlet Mount-Tools files
  • Run the upgrade through the Invoke-VMScript cmdlet
  • Stop the virtual machine with the Shutdown-VMGuest cmdlet

  You think the restart after the upgrade of the tools.

  If you let reboot happen, view agent service will take place. Maybe it's something you want to avoid.

  There are several ways to achieve this:

  • Before you restart, set the startup type of the service to the people with reduced mobility
  • Disconnect the network virtual computer. You can always restart and stop the virtual machine and you can even execute scripts/commands inside the BONE of the virtual machine with the Invoke-VMScript cmdlet

• VMotion error: host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1 'ecx '.

  Problem: I can't move my Exchange vmserver2 a vmserver1 server.

  Error: "host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1"ecx"

  
  Details:

  Vmware KB:

  * Ensure that the hosts have the same features enabled in the BIOS of the servers. If there is an incompatibility between the servers BIOS configuration even if they are physically identical, they always show a compatibility error message. The two most common to check features are the No-Execute memory Protection (NX / XD) and virtualization technology (VT / AMD - V).

  A ran the CPU utility Vmware as referenced by

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003718

  
  "CPU that have similar features. "This means that the need of processors from the same manufacturer (AMD or Intel), be of the same family (Pentium, Xeon, etc.), and have common features extended between ESX servers involved in the VMotion.

  My results:

  vmserver1 Dell Inc.    PowerEdge 2950 2 Intel Xeon E5405 of CPU @ 2.00GHz
  vmserver2 Dell Inc.    PowerEdge 2950 2 Intel Xeon L5410 of CPU @ 2.33 GHz

  They both share exactly the same characteristics:
  FT support
  Enable VT
  VT Capable
  NX/XD
  FFXSR
  RDTSCP
  SSE
  SSE2
  SSE3

  Support Relaxations:
  NX/XD
  RDTSCP

  Relaxations unsupported:
  All THE features of the SSE
  FFXSR
  CMPXCHG18B

  In the 'Show Windows debug' it reads 'of the compatible CPU"

  This virtual Exchange machine works since Esxi version 3.5.  I am testing now vCenter Server 5.0 with version 5.0.1 on the Esxi server.

  Note: I've also been meeting random uses CPU high, leading from Windows Server 2008 to lock up completely.  I have found no trace of problems within the Windows host and Vcenter is not questions.  I have "reset" of the virtual machine in order to get the server back online.  The CPU to the top lock is random and the server can run for days with no problems. * Don't know if it's related...

  Virtual host config Exchange computer:
  Guest operating system: MS Windows Server 2008 64 bit
  version 8 of virtual machine
  CPU: 4vCPU
  Memory: 10240MB
  Overload memory: 420,61 MB
  vSphere HA Protection: protected
  Host CPU consumed: the 209 MHz

  Maps: vmserver1 watch "CPU is not compatible" CPU: 0% (none of the virtual machine running)
  Consumed host memory: 9823,00 MB
  Active memory of Fords: 409,00 MB

  Views of storage: I have a warning symbol on the QNAP iSCSI disk that hosts the virtual Exchange computer but I see no record... I'm new here...

  I understand that vmotion apply restrictions on the movement of VM compatibility to avoid it.  The components of the HA does not apply to these requirements.  We tested yesterday HA, succsessfully and this how we came to be stuck with the Exchange vm on vmserver2 and it cannot migrate to vmserver1.

  I appreciate your time and consideration,
  Tim

  It seems that you have two different processor speeds. Try the VCA mode and also check the BIOS version you and make sure they match.

• Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I see that this error was mailed here, but can't seem to find a position with a resolution.

  We use Lab Manager 4.0.4 and just upgraded the hosts in our laboratory.  Before updating to ESXi 4.1 ESX 4.0 u1, we cancelled all VMs in all configurations.  There is none who were suspended, they were all turned off.  We have improved vcenter 4.0 to 4.1 as well.  We moved from a dell poweredge 1950 with two quad core intel L5410 to a r610 with two quad core intel processor E5506.

  When I try to turn on some of the lab configurations (our VM models all work fine), I get this error:

  • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I threw the State for the lab configuration (even if it was turned off and cancelled) and still get this message.  I guess the processor architecture of these chips is quite similar, and both are Intel.

  If I go into this directory of Manager of laboratory inside the data store for one of these virtual machines that does not light and add to the inventory, he turned and starts fine on my server esxi 4.1.  So how do Lab Manager to get account it's well deploy and start it?

  Hey billk.

  Although not supported completely, you can solve it by going to the SQL of Lab Manager database.  Make sure that you back up your database before you do anything like that.

  Open the table "fsdir" and corresponds to the dir_id with the id Lab Manager VM.  Once you find the relevant line, change suspend_proctype_id to null (Zero-Ctrl).  You can do this while Lab Manager is still running.

  The results can be unstable (i.e. Windows can crash if it was a drastic change of CPU), but at least you look at a hard reset.  The bat reset certainly not being able to return to the previous state.

  Also note that while Lab Manager does not include CVS, if you activated, your virtual machines still work in CVS mode.  If you have a mixture of heterogenious of hosts in a cluster for Lab Manager, you can see this question pop up a lot.  There is absolutely nothing wrong with take back the virtual machine because of the VCA, but Lab Manager thinks otherwise and prevents it.

• How to start the database after the judgment

  Hello.
  I had a load havy operation, could not kill, so I run the judgment.
  now I can't open the database, which is massage I get:
  "ORA-16038: 3 log sequence # 52 can be archived.
  ORA-19809: limit exceeded for file recovery
  ORA-00312: threads of 3 1 online journal:
  ' / u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_3_48fpv6q1_.log'
  ORA-00312: threads of 3 1 online journal:
  ' / u01/app/oracle/flash_recovery_area/ORCL/onlinelog/o1_mf_3_48fpv95v_.log'
  "
  What should do?

  You can see what follows, if this can help:

  http://arjudba.blogspot.com/2008/07/database-startup-fails-with-error-ORA.html

• Judgment of the javathreads took 39564,694 ms - it's too long

  Hello
  
  We have a cluster of many jrockit JVM.
  We need a flow and low gc-pausetimes.
  
  Every once in a while, one of these machines shows exceptionally long-time gc.
  Looking at the logs files, we find the entries like:
  
  [Mar 23 December 22:36:40 2008] [1230068200511] reason for GC: reached GC trigger, cause: heap overflow
  [Tue dec 23 22:37:17 2008] [1230068237423] judgment of the javathreads took 36909,749 ms
  ----
  [Mon 29 Dec 16:41:18 2008] [1230565278575] reason for GC: reached GC trigger, cause: heap overflow
  [Mon 29 Dec 16:41:58 2008] [1230565318141] judgment of the javathreads took 39564,694 ms
  ---
  
  Generally, these times are much less than a second and sometimes they go a little more than a second.
  
  JAVA_OPTS = ""-server-Xms800M Xmx4096M - XXcompressedRefs: fake - Djava.net.preferIPv4Stack = true - XXsetGC: singleconcon-Xverboselog:/var/log/javavm.log - Xverbose: memory, memdbg, compaction, opt, gc - XverboseDecorations = timestamp, millis - Xgcreport - Xstrictfp - XXexitOnOutOfMemory - XXdumpFullState - XXstaticCompaction - XXcompactRatio: 10 ""
  
  
  We can reproduce this problem on 27.3.1, 27.4.0, 27.5.0 and 27.6.0
  
  .....
  [Mon 29 Dec 16:41:18 2008] [1230565278575] reason for GC: reached GC trigger, cause: heap overflow
  [Mon 29 Dec 16:41:58 2008] [1230565318141] judgment of the javathreads took 39564,694 ms
  [Mon 29 Dec 16:41:58 2008] [1230565318141] old collection 233002 began
  [Mon 29 Dec 16:41:58 2008] [1230565318141] size of queue before GC Alloc: 653056, acronyms: 13, older: 0
  [Mon 29 Dec 16:41:58 2008] [1230565318141] parts lot 12 compaction to index 72 (internal type) (exceptional false)
  [Mon 29 Dec 16:41:58 2008] 233002:12 parts (maximum 128), of the OC [1230565318141] index 72. Internal type, (exceptional false)
  [Mon 29 Dec 16:41:58 2008] Beginning of area [1230565318141]: 0x2add266ef500 end: 0x2add2f37a080
  [Mon 29 Dec 16:41:58 2008] [1230565318141] marking starting initial phase (OC1).
  [Mon 29 Dec 16:41:58 2008] [1230565318194] the javathreads reboot took 17,228 ms
  [Mon 29 Dec 16:41:58 2008] [1230565318195] start concurrent marking phase (OC2).
  [Mon 29 Dec 16:41:58 2008] [1230565318594] adding 3 handles final die wire 18538 "process reaper".
  [Mon 29 Dec 16:42 2008] [1230565320020] from precleaning phase (OC3).
  [Mon 29 Dec 16:42 2008] [1230565320608] judgment of the javathreads took 488,759 ms
  [Mon 29 Dec 16:42 2008] [1230565320608] start of scoring final phase (OC4).
  [Mon 29 Dec 16:42 2008] [1230565320689] remove 20 packs of ongoing work pool, now packages of 1498
  [Mon 29 Dec 16:42 2008] [1230565320689] total time of competing brand: Ms. 2547,660
  [Mon 29 Dec 16:42 2008] [1230565320689] end of marking phase
  [Mon 29 Dec 16:42 2008] [1230565320689] required to perform parallel scanning since Alloc queue is not empty.
  [Mon 29 Dec 16:42 2008] [1230565320689] use parallel scanning rather PARALLEL sweep due to demand.
  [Mon 29 Dec 16:42 2008] [1230565320689] from parallel scanning stage
  [Mon 29 Dec 16:42:01 2008] [1230565321031] update 815069 references 34219 moved objects, nonmoved and 586187
  [Mon 29 Dec 16:42:01 2008] [1230565321038] total sweep time: 348,937 ms
  [Mon 29 Dec 16:42:01 2008] [1230565321038] end of phase scan
  [Mon 29 Dec 16:42:01 2008] [1230565321038] size of queue after GC Alloc: 0, acronyms: 0, oldest: 0
  [Mon 29 Dec 16:42:01 2008] [1230565321038] compact way report time: 0.256837
  [Mon 29 Dec 16:42:01 2008] Break from compaction [1230565321038]: 153.938 (target 387.731), update of break Ref: 194.594 (target 387.731)
  [Mon 29 Dec 16:42:01 2008] [1230565321038] update 975843 Ref: 815069 inside the area of compaction and outside 160774 (limit: 2390308).
  [Mon 29 Dec 16:42:01 2008] Compaction [1230565321038] ended at the end of 83, 0x2add2f376980 index object address.
  [Mon 29 Dec 16:42:01 2008] [1230565321038] Summary: 233002; 72; 83; 12; 1; 0; 153.938; 387.731; 194.594; 387.731; 975843; 2390308
  [Mon 29 Dec 16:42:01 2008] [1230565321038] gc-trigger is 21.644%
  [Mon 29 Dec 16:42:01 2008] [1230565321038] 1204176.144 - 1204179.042: GC 1237312 K - > 768208 K (1535092 K), short breaks 466,296 ms
  [Mon 29 Dec 16:42:01 2008] [1230565321038] Page before GC errors: 2, page after GC faults: 2, pages heap: 383773
  [Mon 29 Dec 16:42:01 2008] [1230565321039] (OC) in anticipation of finalizers 0-> 260
  [Mon 29 Dec 16:42:01 2008] [1230565321042] the javathreads reboot took 3,487 ms
  .....
  (from 27.5.0)
  
  any ideas?
  setting jvm settings?
  
  
  Thanks in advance.
  long live Martin & Johannes

  Hello

  The questions posed above is a good starting point, especially what OS you use. The suspension mechanism is somewhat different between Linux/Solaris and Windows.

  In fact, when a thread is stopped, it is sent a signal (using the standard signs of Linux/Solaris). Sometimes, the signals are blocked in these BONES: are. We sometimes saw very long latency times because of this. One reason might be if an application is reading or writing on a NFS stale disk or slow. During the operation, traffic is blocked which could lead to these problems. If you use NFS, try to check that the NFS shares are working properly.

  Another problem may be with what we call the transfer roller (it would be a problem JRockit). However, you should be able to see it in the newspapers, when running with Xverbose:memdbg as you do. Try searching for "transfer roller" in the newspaper. If you find something, try to add the java option '-XXrollforwardretrylimit:-1 "(if you find something that I can explain what it does ;))

  The next step for me would be to take a JRA recording with latency using JRockit Mission Control data. It is a very powerful tool, well worth watching for anyone working with the largest Java projects. A recording of the JRA is basically a record of what is going on in the JAVA virtual machine. It has very low overhead, so you can run records long production without problems. Try to make a record with at least one of the long breaks (use the last version of JRockit as well, because this will give the details). Latency data are part of the JRA records that measure anything that causes the latencies. This can be the e/s network, synchronization or file or whatever it is. Using such a registration, we can see if something out of the ordinary is made during the break. You can read more here: http://edocs.bea.com/jrockit/tools/jmcpdfs/mc3/mcjra3.pdf (Chapter 2 and 16).

  Kind regards
  / Mattis, JRockit sustaining engineering

• judgment of new e-mail drop-down menu

  How to stop these little boxes of new emails coming down on the top right of my macbook air

  Hi Bunt11,

  I understand that you do not want to stop the boxes that appear at the top right of the screen on your MacBook Air (also known as the notifications) when you receive the e-mail. Fortunately, this can be done relatively easily in the system preferences. You can open the system preferences () in the Dock (if she appears at the bottom of your screen), or in the Apple menu > System Preferences. Once you'll want in system preferences, click Notifications, and then click Mail in the list on the left and select "None" rather than "Banners" or "Alerts" on the right.

  Notifications systems of preferences allows you to indicate when you do not want to be disturbed by notifications and set options to control how apps to display notifications and how they are sorted in the Notification Center.

  To open these preferences, choose Apple menu > System Preferences, and then click Notifications. Select do not disturb or an application on the left, then view or change the settings on the right.

  Alert style [app]

  Select a style for notifications from the app: No: Notifications do not appear on the screen. Banners: Notifications are displayed on the screen and disappear after a while. Alerts: Notifications to remain on the screen until that fire you.

  Mac Help - preferences of Notifications

  Kind regards.

• After v29 updated, the tabs that I left open constantly move left and right, no judgment.

  Everytime I open firefox, all the tabs I got on top, constantly moving from left to right, no stop. It only stop when any of the charges or recharge page.

  Start Firefox in Safe Mode to check if one of the extension (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extension+and+themes