Lightroom does not apply lens profile automatically
Hello
I use Lightroom CC based on MacOS.
Unfortunately, Lightroom does not apply the profile of my SIGMA 150-600 mm F5-6. 3 DG OS HSM p014 in development mode, but shows the lens correctly in library mode. All other lenses (CANON) are applied automatically, so it seems that I have a configuration problem. Lightroom shows that the profile cannot be detected automatically and cannot be applied. In the list of lenses, I can choose the target and that the profile is applied.
Support said that this target is not supported. I can see the attached list of the answer all lenses supported by lightroom. And guess what, the lens is in this list. Detective Conan.
So the support team has done a worse job, and did not check the list. I described that I can choose manually, but the response above was the answer.
Any ideas how a.) the coup support team for doing their job and b.) help me with my problem.
Thank you
Peter
After selecting the right lens manually, try this:
This should fix it in the future.
Tags: Photoshop Lightroom
Similar Questions
-
Lightroom does not launch or closes automatically after the splash screen
Lightroom does not launch or closes automatically after the splash screen
I suggest you to please you by going back to the earlier version of Lightroom once and see if it helps.
How backwards: Instructions to restore an earlier version of update
-
Release 2015.5 CC Lightroom does not have lens Nikon D800 details matter.
After updating to the version of Lightroom CC 2015.5 the program any lens Nikon D800 details. t show the focal length but not the details of the lens:
Before:
Now:
We can tell you that this is a bug known at this time. A solution is being developed on I understand and apparently there is no loss of data, the information is simply not displayed.
-
Lightroom does not launch after he hit the upgrade
On iMac.
On launch, Lightroom splash screen appears, and then blinks off and what's - it - not Lightroom.
Have you tried to disconnect / connect to the creative cloud. No difference.
Am upgrading to resist. Tried this last week and import from SD card failed (many white image); previous version then restored.
Please suggest corrections.
Thank you
Hi Sploy,
Please try the following steps in the article: Lightroom does not launch or closes automatically after the splash screen
Kind regards
Tanuj
-
I tried to roll back the last update of lightroom, but it says that it does not apply to me. How to bring back the old version?
Hi cherry_boy,
6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available
Concerning
Pete
-
I can't get Adobe Lightroom updates to 6.0.1 to 6.3. I get the update of the message U44M2P28 error does not apply. Can you help me solve this problem?
Would you uninstall Lightroom and restart your computer, and then please follow mentioned below as follows:
1. first install Lightroom 6.0 from the link below:
2. upgrade to Lightroom 6.3 using the link below:
http://blogs.Adobe.com/lightroomjournal/2013/06/keeping-Lightroom-up-to-date.html#lrcc2015
~ Sarika
-
I downloaded ps CC and CC bridge but camera raw has no load up automatically. I tried to download Camera Raw 6,7 Adobe, but it is said that this camera raw does not apply to me. Any thoughts?
HI JohnnyFinley
Photoshop and Bridge CC includes the latest camera raw Plugin 9.1.1.Camera gross 6.7 does not work with CC products.
You should be able to see the camera raw version 9.1.1 if you have downloaded the version of Photoshop CC 2015
Alternatively you can manually download Camera raw here install plug in Camera Raw
Concerning
Assani
-
Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have visited
logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Cannot connect because windows 7 does not recognizse my profile
Original title: Mr. Wall
Cannot connect because windows 7 does not recognizse my profile
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.
You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
6 Lightroom does not start correctly
LIghtroom 6a fonctionnee om my 10 (x 64) of Windows without problem for 6 months. After the installation of a slide (CyberViewX) scanner and a regular update to Win 10 that occurred automatically when closing down the computer, the 6 Lightroom does not start correctly since I restarted the computer. I uninstalled the scanner CyberViewX program and rebooted the computer again. The only thing that happens when you try to open LR6 is a message that an error has occurred when opening the catalog. I do not have a backup catalog, and there is a button where I can choose a different catalog. When you press this button I find the backup catalog, but when I chose this catalogue I go back to the original message and the backup catalog was obviously not chosen. There is a button to create a new catalog as well and when I press this button I just in my photo folder and there seems to be no way to create a catalog or open LR6. This form of dialogue is obviously not working correctly.
There was a lock by the catalog file, and I deleted this file. I also tried all the tricks LR running as an administrator and assign full privileges for all users of my photo file.
The only thing I have not tried is to uninstall and reinstall the whole LR6, but I have a lot of photos and work so I hesitate to do this without knowing that it is necessary and if sure that I can get everything back in order with the old catalog and all restored. Anyway to fix corrupted with the installation DVD files?
What should do? Help!
Hi bjomb,
You suggest to choose the option to create a catalog and give it the name once you get the pictures folder window, and then choose create.
This would create a new catalog.
check if it opens the new catalog, and it passes under the background processes in the Task Manager.
If it does not, then you need to reinstall Lightroom program and it would not affect your changes as changes are stored in the catalogues and catalogues remain it is same when the resettlement.
Kind regards
Claes
-
5.7 Lightroom does not. I have 'some import options was made' - "files could not be copied to the backup location" notice appearing as I download the device. I ignore and click OK. I then edit my photos and try to export. Water is no longer an option and exported labor is the original and not the published work? What do I need to fix this?
As Chetna asked, you export original? Yes, you are. It is asking to export a copy of your original file, that is, of course, not changed. So, Yes, you won't see any of your changes. That's why you can not apply a watermark. Adding a watermark in the image he'd a file not original.
Choose another value for the Format of Image under settings in the file.
HAL
-
CC of Lightroom does not import the photos and displays an error, backup also fails
Hello
I use Lightroom CC on Mac and I try to import images, but Lightroom is unable to do it this time for some reason any.
During the last import Lightroom does not have the download of pictures and showed me the following notification: "Lightroom has encountered an error when reading the preview cache and needs to stop smoking. Lightroom will attempt to solve this problem, the next time it starts.
As it stops it suggests to the backup catalog files and the following notification appears: "Lightroom could not save the catalog named XXX.". Check your folder permissions, and then make sure you have space on your rear disc and disc from the main catalogue.
I have 2 TB of disk space available.
I tried to import the camera and my computer, however it is unable to complete the import in two ways, just that several files have been imported and import fails. In each attempt to import files Lightroom creates temporary files with multidigital names.
I restarted Lightroom, then my computer, then attempted to create another backup folder, nothing happens. Please help me.
Thank you.
Hi all
6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available
Concerning
Pete
-
6 LightRoom does not recognize my Nikon D700 DSLR. I have connected the PC to my DSLR using Windows 10. I entered the program 6 of Lightroom and selected "file/Tether Capture / captive Start Capture." He then says "No Camera detected"
I think I have the right cable attached. It is a 5 Pin mini-cable USB 2.
The mini USB camera works, I think. I uploaded photos from the D700 to my computer before.
When I connect and disconnect the tie between my laptop and the D700, computer one problems
sound of Bell saying he acknowledged a connection to the laptop device.
What could be wrong?
Thank you!
Len.
Hello
Please upgrade to the latest version of Lightroom, and the question to tie with El Capitan will be resolved: keeping up-to-date for Lightroom
Kind regards
Tanuj
-
Lightroom does not recognize raw (necs?) from my Nikon AW1 files. It loads them in JPEG format. I know that it is possible to update to Lightroom, so he knows my Nikon, but I can't make it work.
I'd like to load as .dng files.
update by downloading the files directly and then apply it to lr 4 and earlier versions: http://www.adobe.com/downloads/updates/
for lr 5.7.1, lr 5 last updated, use the link below:
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
CC of Lightroom does not identify the purpose of Nikon 16-35
Can someone tell me why my CC Lightroom does not recognize 16-35mm lens for Nikon in the Correction of the lens? LR 5 did. Is there a bug in the latest version of LR?
Thank you!
Yes, you should make the objective of corrections prior to mergers HDR or pano.
Maybe you are looking for
-
Username or password incorrect after the creation of new account, tried everything
I deleted the old email account and did it again. Thunderbird has created the account e-mail address, but when I try to use it, I get the message 'User name' or incorrect password I can access the email on the site ok, so the login ISP account and pa
-
Satellite C50D - Is used to power-is it dead?
Hi, I can't get any life out of my laptop. He is cut off while watching something on youtube. I tried the procedure with lead and holding it to the battery and hold the power button / stop, but nothing. I also bought a new outlet and installed that a
-
Someone at - it experience with a Toshiba Tablet docking station? The "Toshiba Multi Dock with HDMI (for the Tablet Toshiba Thrive). Part - No. PA3934U-1PRP working with excited especially with German AT270-101 tablets?
-
Satellite P100-188: low resolution fonts and menus, game
Hello I have a P100-188 and fonts on the office and Internet icons display very well, however the fonts displayed in message boxes look terrible, looks like they are displayed in low resolution, you can see practically every pixel that make up the le
-
a pentium Dual-Core E2180 processor will work in a Pavilion a1102a desktop computer
An Intel Pentium Dual-Core E2180 processor will work if it is installed in a desktop Pavilion a1102n?