Lightroom fails with the introduction screen

Similar Questions

• HPDM deployment fails with the error code: 14031022

  Hello everyone,

  I ve a strange problem with a new repository of child I ve created two weeks ago. Following situation:

  We have a master and (until now) repository repository a child for two locations. Capture and deployment on each side works fine. Now we're getting a third place, so we need another hpdm gateway and a child repitory to this place.

  I've added and configured as one worked and insert the IP address of the gateway again to a thin client to the new location. When I deploy an image on this client, I get the following error in the console of hpdm:

  2014-12-16 11:02:09 Assign repository: repository child name repository
  2014-12-16 11:02:13 synchronized correctly Completed.
  2014-12-16 11:02:14 task sent to the device management gateway
  2014-12-16 11:02:17 task has been retrieved from the agent.
  2014-12-16 11:02:58 deploy the image ready using the repository: repository child name guard.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed

  Agent of Thin Client Gateway: 4.5.3660.18502

  HPDM bridge officer: 4.5.3660.19.503

  agent update task works.

  I ve configured the shared folder and FTP access. Both are available from thin client. Configuration of the repository the two test passed successfully.

  Repository of child synchronize all the data from the master repository with success.

  Usually, I use FTP in IIS services, but filezilla I ve installed (disabled FTP IIS) for the best connection.

  Connects to the deployment task:

  000027) 16.12.2014 11:02:27 - (not connected) (10.32.2.52) > connected on port 21, sending the welcome message...

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > USER test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > 331 password required for the test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > PASS *.

  16.12.2014 (000027) 11:02:27 - test (XX. XX. X.XX) 230 > connected

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > FEAT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > QUIT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. Goodbye > 221 X.XX)

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > disconnected.

  Next, I get the above error HPDM. The server log HPDM said next.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  Mhh not a lot of information.

  I Don t really get what could be the problem. You have an idea? Do you need more information (newspapers, error message TE) for assistance?

  Concerning

  Martin

  After the coup of controller.conf and the screen of the dialog editor repository that you set, your master repository was not configured this way:

  ReposPath has the value "C:\Inetpub\Ftproot\HPDM" in controller.conf (assume C:\Inetpub\Ftproot is the root directory of the FTP server)

  In the Master repository Editor dialog box:

  Implement FTP path to ftp: / //HPDM - he WS ftp: / /<>/. your screenshot.

  This is the reason that all of your linked FTP task failed with the same error code.

• Home Vista premium: KB978338 fails with the error code 80004005

  Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

  Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

  Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

  Hi gbislay,

  I think that you are able to get on the desktop after changes have been restored.

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  The system update tool

   

  Step 3: Clean boot the computer

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

  You can see the steps outlined in the article below, which deals with a similar question

  Windows Update error 800f0826

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

   

  Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CP1525nw: new router: cp1525nw wifi install fails with the vague error message

  Product: HP Laserjet Pro cp1525nw

  OS: WIndows 8.1

  Hardware: Computer Asus laptop

  Recently received new router from Verizon (FIOS), model FQG1100 BHR4 router

  Purchase printer in 2012.

  Printer has worked with the old router; It will not communicate with the new router.

  For four days I deleted the printer from the laptop several times and tried to reinstall using the wifi. Installation instructions say to run the CD, select wifi, connect the USB cable when prompted, configure, remove the cable when prompted.

  When I attach the USB cable, Setup starts, but it expires ("taking too long") or fails with the vague message about not finding the product. I'm never invited to an SSID.

  I tried a USB installation and it worked; If the USB cable is good.

  Share print files & Windows is activated.

  I tried to re - adjust the printer by default and insured menu wifi said 'ON' for the wifi.

  I run a wireless network test report:

  SWITCH for wireless, wireless and security.

  Failure of network name (SSID found).

  DO NOT RUN for: printer settings consistent with the settings of the wireless router, no filtering, connected, the signal strength, other networks detected.

  Wireless netwrorks detected: 9

  I note the router label does not say "SSID", but said "ESSID".

  I have ideas for what to try.

  Please post here or send message to [personal information deleted]

  Last night I finally got to work.  I removed the printer entirely from the PC and rebooted. I turned off the printer. I ran a cable to the router (cable modem). I have reset the router, which then assigned an IP address to the printer. I changed the security settings on the router to use WEP instead of WPA. I ran the HP printer, Setup - and he finally presented me with the screen to "provide the SSID.  The program is run properly. I printed a test page. I changed the router security to WPA2. I printed a test page.     I tried to restart it and reprinted.  I also tried to remove the cable and then print again - printing failed.

  In short, I needed to do two things: connect a cable and change the router temporarily WEP for installation.

  In my case, my printer is close enough to the router with the cable.  A bit disappointing that the true wireless will not work, but I can print wireless from my laptop.

  I saw how many people have had the same problem, I had, and how much of HP is of any help to solve this problem.  I am convinced that the printer has a defect.  I hope that my posts will be useful to a few people having the same problem.

• All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  

  Hello

  Greetings!

  Close to Lightroom.
  Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

  And delete the file previews.lrdata.

  Note: do not delete the catalog with the extension .lrcat file.

  Concerning

  Jitendra

• Problem with the main screen of firefox

  After the update of firefox to firefox 15.0 16.0.2's problem with the main screen. At the top of the main screen displays the bar (caption bar of the main form) that I have win xp and under this title is bar legend like win 7.

  Firefox is running on Windows Xp, if better, I can send the screen, but I don't know where is possible add image to this error report...

  Okay, the problem has been resolved, problem was with the Tab Mix Plus extension. I have an older version of this extension, because at work may not update directly, because I'm going to the Internet via a proxy. Download, update firefox extension directly through the proxy is not possible... I need to download via the other internet browser, in order to not do it often...

• Exit 11 topic: config fails with the error analysis

  No problem after installing version 11 until they tried to use
  Subject: config which failed with the following message.

  XML parsing error: undefined entity
  Location: subject: config
  Line number 59, column 1: key = "& focusFilter.key;" modifiers = "accel" oncommand = "document.getElementById('textbox').focus ();" / > "
  ^

  The problem was caused by Prefsearch addon. I have notified the
  Developer.

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• All security updates fail with the error A 80071, 91 code

  Hello!

  System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

  Background:

  • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
  • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
  • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
  • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

  Problem:

  • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
  • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
  • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
  • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

  What I tried:

  • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
  • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
  • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
  • Tried a Full scan with MSE. No anomaly.
  • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
  • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
  • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

  I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

  I'm out of ideas. What's next?

  Thank you

  ~ Ibrahim ~.

  1. about 1 year, I installed MSE.

  2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

  3. Yes, for about 30 minutes before I uninstalled and installed MSE.

  4. Yes.

  However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

  Thanks for the help, if! :)

• The Service Pack installation failed with the 0x8e5e03fe error code.

  Hi all

  I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.

  ' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".

  2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.

  Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514

  Error code: 0x8e5e03fe

  State: 7 "

  I took the following steps to resolve. but it's not helping me.

  1. I CA anti-virus, I disabled the Agent Client of CA.

  "2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-04-16 15:49

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 753
  No error found.

  3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "

  Please help me

  Concerning

  Ganga

  Hi Ganga,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows updates fails with the error code 'E '.

  Original title: Error Code 'E '.

  What does the error code E?

  Keep saying I need updates and then fails with the E. help error code, please.

  Hi Rodrigues0406,

  1 Windows operating system you are using?

  2. What is the exact error or message code you get?

  Method 1

  I suggest that you reset Windows update components and check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  If you're still having problems, then you can check in the history of Windows update and the updates recently installed in vain.

  Step 1:

  Check the update history to see what updates have been installed or has failed. See the link for the same mentioned below.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Step 2:

  If you see updates failed, you can try downloading and installing the updates manually from the Microsoft download center:

  http://www.Microsoft.com/downloads/en/default.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• BITS service fails with the error code 193: 0xc1

  Program update of Microsoft with Vista SP 2 is a failure with error code 80246008.  Looking at the forum it was suggested that the BITS service does not work so I check this service and it is not executed.  When I try to start it, it fails with the error message 193: 0xc1.

  The only suggestion I have for this fix is to reinstall Vista.  It is probably not necessary?

  Hello

  I suggest you follow the steps mentioned in the article below.

  You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start the Background Intelligent Transfer Service

  http://support.Microsoft.com/kb/916251

  If this does not help then I suggest you to download the update that is mentioned in the link given below and install it on the system.

  Update for Windows Vista (KB960568)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=d7ae9660-BB13-4F0C-816b-85de3980ec1b&displaylang=en

  Click the link below for more information about the Windows Update error.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  http://support.Microsoft.com/kb/956706

  Windows Update error 80246008

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download works 9 KB2092914 security update and it fails with the error code 646

  Update of security for Works 9, KB2092914, downlaod fails with the error code 646

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

  Please let us know if that helps.

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?