Lightroom is frozen and will not let me close

Similar Questions

• Firefox is frozen, does not and will not let me close iMac.

  A few days ago, I installed Evernote. Who made sure my iMac would never close or go to sleep or restart for Evernote wanted to continue to run all the time. Firefox has now stopped responding. I can't open Firefox, I can close, neither can I stop, restart or log on my iMac. I guess it could be related to Evernote, but I can't find a way to uninstall Evernote. I don't know how to go in Safe Mode on the iMac. Two months ago, I upgraded the software to the Mavericks and have had problems since. Safari is the only browser that works now. I read that I have to uninstall and reinstall Firefox, but do not see how, because I can't open Firefox to get help on the toolbar for Firefox. I don't see the toolbar of Safari. I can not open help and consult the troubleshooting information because I'm not in Firefox, I'm in Safari.

  Hello
  
  Looks like you have several programs blocked (not answer). Here are the instructions from Apple to "force them to leave" applications that don't respond - http://support.apple.com/kb/HT3411

  If you still can not shut down your computer after you try this, you can press on and press and hold the button for a few seconds and the computer turns off.

  It is likely that once you can shut down the computer and then restart it, Evernote and Firefox and other programs will behave normally.

• I try to access an application on the website of the Government GOING and that is to say the connection is not approved and will not let me continue, how can I do?

  I had this problem before on sites Web of VA. How Firefox can not trust a site from the U.S. Government? It indicates that the connection is not approved and will not let me continue. How can I make Firefox let me continue?

  This page opens another page in a frame.
  In such a case, you cannot make an exception.

  • https://vabenefits.VBA.Va.gov/vonapp/default.asp

  This server does not send a certificate chain that ends with a built-in root certificate.

  • http://www.Networking4all.com/en/support/tools/site+check/report/?FQDN=vabenefits.VBA.Va.gov & Protocol = https

  You can open this page in a tab to make it possible to create an exception if you really need access to the site.
  Note that storing a permanent exception should not be.

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • inspect the certificate via the "view..." button. »

• When I close firefox it tells me that I am closing multiple tabs. and will not let me save them. the only option is to cancel or OK.

  This has just begun. When I close firefox it tells me that I am closing multiple tabs. and will not let me save them. the only option is to cancel or OK. When I say OK and restart Firefox all my tabs go :-( This happens every time now. I know how to recover my old tabs but whenever I close Firefox it always warns me that I'm closing multiple tabs.

  Tanks for help getting Firefox working properly again
  Jim

  Do not use 'Clear history of Firefox closing' to clear the 'browsing history '.

  • Tools > Options > Privacy: history: [X] clear history of Firefox closing > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Using the "Show my windows and tabs from last time" is a more reliable way to restore the session data.

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

• I'm trying to import my IE Favorites and have read the instructions on how to do it, but the import button in the file in gray and will not let me import. Any ideas?

  I'm trying to import my IE Favorites and have read the instructions, but the import button in the file in gray and will not let me import. Any ideas?

  Try using the import option in the Bookmark Manager (also known as the name of the library)

  1. In Firefox, select the bookmarks menu, then "organize bookmarks" open library
  2. In the library, select "Import and backup" then "Import HTML.
  3. You should get I hope that the ability to import from Internet Explorer.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• I am trying system restore and it says I have no restore points and will not let me create restore points

  help I am trying system restore and it says I have no restore points and will not let me create restore points
  * original title - find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting *.

  Hello

  1. what exactly happens when you try to create a system restore point?

  2. you receive an error message when you create system restore point?

  3. what operating system is installed on the computer?

  In the event that you use the Windows 7 operating system you can follow the steps below and check if the problem persists.

  Method 1:

  Step 1:

  Locate the service associated with the restoration of the system or Volume Shadow Copy Service is started after the computer is restarted. This service can be stopped by some viruses as well, so you can try to run a scan of your computer.

  To check the service

  (a) click Start

  (b) in the start search box type Services

  (c) click on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Shadow copy volume started Automatic\Manual

  Step 2:

  Also check the dependency services that are required for the System Restore Service run.

  To verify that double-click the service, and click the Dependencies tab.

  This service must be started before the restore point is created automatically or manually.

   

  Method 2:

  Try disabling the firewall and windows temporarily on the computer security software and then try to create a system restore point and check if that helps.

  Follow the articles given below to change the settings for the firewall and security software settings

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note:

  If you are able to perform the system restore after you disable the security software then you may have to contact the software publisher for the security software by disabling the firewall and security software is a potential threat to the security of the system.

   

• When I want to send email from the Explorer, it goes to outlook express and will not let me send email. How can I fix it?

  Why can't I send an email from the Explorer, it goes to outlook express and will not let me send e-mail

  Hotmail questions need to be asked here: www.windowslivehelp.com

  This forum deals only with Windows.

  Steve

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• My trusty 2410xi has a mechanical jam and will not let me do all the work

  recently, when I turn on my trusty 2410xi all-in-One, it of a mechanical blocker and will not let me perform all tasks. I tried to disconnect the supply of the data lines, nothing helps. Looks like the print head may be stuck? I remember having the same problem a long time ago but don't remember what could be the solution to the problem.

  There are a few things that you, and not when this happens. Most of the time it's a very small piece of paper holding things to the top, or the printer just need a reset to zero more deep. The document following the link will take you through all the things you can try. If this does not work, you will need to replace the printer. Let me know what happens.

  http://goo.GL/BnGuX

• Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

  Hello

  I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

  I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

  I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

  I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

  Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

  I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

  Thanks in advance,

  Alan

  PROBLEM SOLVED!

  It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

  Thanks again to all who have suggested things.

• Hello, I have a new Mac, I need help to install adobe photoshop c6 I need to install and pay fees I want. but I've been trying and get no days... I had the version of 30 days and will not let me buy him. I NEED FOR MY WORK PLEASE

  Hello, I have a new mac, I need help in installing adobe photoshop cs6, I need to install and to pay the tax. But I've been trying and don't get days, I got 30 days version and will not let me buy it. I need it to work. Please

  Hi the isac,

  You can download Photoshop CS6 from this link: download Creative Suite 6 applications

  You can buy the product from this link: Creative Suite 6

  Kind regards

  Claes

• Does anyone know the phone for Customer Service? Im trying to install an app and will not let me

  Does anyone know the phone for Customer Service? Im trying to install an app and will not let me

  There is no support for this phone.

  you could get help if you could explain or you can try to contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• Why the application manager said that muse is updated, when it isn't? And will not let me update?

  Why the application manager said that muse is updated, when it isn't? And will not let me update?

  I have the latest version of OS X I opened Muse and he tells me that I have to update. I have check and that's only still v1.1, 960 to build.

  There is a promblem I don't know?

  Hello

  Sorry for the confusion and frustration.

  Because the Muse is an Air application, there are some limitations in the way that we interact with the Application Manager that can cause these types of States in conflict. We have plans that will address this, but unfortunately, it of a complicated situation and will take time.

  I'm working on a document that will address all the various installation questions such as this one and post it on the forum and elsewhere when its done. I apologize that this has not happened before and several people were affected than expected.

  See you soon,.

  Justin price

• 755 p frozen and will not be awarded to zero...

  I have a 755 p (Alltel). Last night, he froze and will not be reset. I tried a soft reset, hot and hard, but whenever I put the battery in the numbers/screen just flashes on and outside, with no screen.

  I go to school in Tennessee and do not have access to an Alltel store no more than 3 hours of driving...

  I NEED A FIX!

  I disassembled the phone and discovered that it is the key part of volume that was stuck and was not allowing me to push any other button or reset the phone! I pulled the button up and now the phone works great! Thanks for your help...

  Message is about: Treo 755 p (Verizon)