Lightroom is showing corrupted files and an "end of file unexpected has occurred" when the original photo in my hard drive external is fine.
The corrupted file is coming with the lines, colors and split into two or three. Is there something I can do to fix this? It's enough to the point where I want to uninstall it, its happening too often boring! Here are pictures of work I can't go back and reshoot.
It is very probably a clerical error somewhere, it could be the card unit photo, card reader or USB cable or USB port, hard drive, or even computer memory. I suggest try different hardware to transfer photos in Lightroom to see if the problem is the card reader or cable USB or USB port, or hard drive. If you have access to another computer, I would transfer the file to the other computer to see if it has the same problems in Lightroom on the other computer.
Tags: Photoshop Lightroom
Similar Questions
-
I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog to date backed on thehard drive and have tried to insert into the new folder to lightroom. Unfortunately none of my changes, collections etc. seem to be present on the new computer. I still work lightroom with any changes on the old computer where all the photos. Help
He seemed to have solved this problem - the catalogue of the old computer has been saved as a zip file. Once extracted, it could be used as the primary catalog for lightroom on the new computer
-
Hi, JTA,.
Suggest you follow the steps below:
- Quit and restart Photoshop
- Open a file to print
- Go to the file menu > print hover over with your mouse and hold down the SPACEBAR > This will open the menu print and resets the print Photoshop preferences.
Kind regards
Claes
-
Cannot hear sound when it is online and when trying to install flash player then it show ATL file DLL missing, please reinstall the program
Hello
We are pleased to hear that you were able to find a solution to the question and I thank you for the information provided. Do not hesitate to contact us, in the case where you face other problems in the future.
-
I have a new MacMini (2 months) with OSX 10.8.2 and 16 GB of ram. I had a partial re - installed, bringing more of my settings from my old computer (a MacBook Pro, 10.8.2)
4.3 Lightroom worked very well until I went to use the slideshow module. I received an error message and the library module does not open. Read the message "an error has occurred when attempting to change modules.
What can I do to fix this?
Here's what I've done so far:
- checekd the disk permissions and disk status - all ok
- check the integrity of my catalogs and saved them - all ok
- moved files preferably, ending with 'plist' from the root and user libraries - no change
- only moved to the folder of the user, to support / library/application - no change
- Checked and opened upward "privileges" on the files for the library files and the catalog files. Checked 'apply to all files' - no change
- contacted one and Nik to see if they had heard of this problem - no, they didn't and don't think their programs could be the cause of this problem
- Contact Adobe - level 1 support - crossed some of the points above - no effect
I am waiting for a call from level 2 return to Adobe. In the meantime, one has this problem or have any other suggestions. The only alternative I have is to completely uninstall Lr and start again. But it's a bit drastic.
Thank you
This is a bug, usually related to having a second monitor attached.
Roll to 4.2 from here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5487 - simply drag 4.3 to the trash, and run this installer.
-
I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?
On your local HARD drive? N ° on your web server? Course
How do you know php? There are exif function that can read EXIF headers on your images. You can use it in conjunction with the functions of file system scanning of the images on your web server. If you have thousands of images, you want to index the results in a database rather than search the real-time file system.
-
I had to restore my computer. I backed up iTunes to an external restore then imported my library back to the original location in my home folder. Then I restarted iTunes with the option key and reopened my library. iTunes is not recognizing that the original music files are on my computer, he thinks that they are alone in the cloud. How iTunes to see the files on my computer?
You back up and restore this way?
Moving a library: quick response if you use preferences by default iTunes settings: copy the folder integer iTunes (and to ensure that all of its subfolders and files) intact at the other disk, hold down the option/ALT key to start iTunes and on request to select a library select iTunes Library.itl file in the copied folder.
-
No longer works since yesterday my Acrobat Reader DC evening. He says the same normal an invitation to subscribe. Or I am already up to autumn and I pay each month. Has happened when I tried to work on a saved file when I was still only the free app. Previously, it had however well Monday. I lose the nerves since this morning. Help me, I beseech you. Thank you.
Pluggable UN iMac 10.11.13
DC Pro Acrobat & Acrobat Reader DC are two different applications.
Acrobat Reader DC is a free application that is used to view PDF files.
For the modification/creation of associated features, you must use Acrobat Pro DC. I see that you have Acrobat Pro DC subscription.
Please open the PDF in Acrobat Pro DC use function related modification/creation of PDF. If Acrobat Pro DC is not installed on your system, you can install using this link https://helpx.adobe.com/acrobat/kb/download-install-acrobat-subscription.html
Kind regards
Nicos
-
Had problems on OS X Yosemite 10.10.5 with Lightroom CC 2015.2 suspended several times so followed the advice on the forums:
- uncheck "Show"Add Photos"screen" "
After awhile the same day LR would always hang and now totally crash at startup with no error messages or anything like that. Tracking guides:
-Sign out, then back in CC
-Deleted preferences of Lightroom with Option + shift while clicking on the application icon
-Preferences from LR deleted via Finder
Has not set, LR has not yet started. Decided to downgrade following guide how roll back to Lightroom 6.1.1 or CC 2015.1 | Lightroom training Laura shoe, tutorials and tips from:
-Uninstalled CC 2015.2
-Reinstalled old CC 2015
Does not solve the problem. Lightroom said: "an error occurred when attempting to change modules." and the catalogue has not loaded. Then followed guides:
-Creation of a new user account and trying to open Lightroom it
Does not work, did not start there either, same error message. Decided to try to uninstall and reinstall the old CC 2015 once again, this time turn off the computer laptop inbetween:
-Uninstalled old CC 2015
-Disconnect from CC
-Restarted MacBook Pro
-Connect to CC
-Installed new old CC 2015
Always the same error message "an error has occurred when attempting to change modules." and can not use LR. Following following guide https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html:
-Disconnect from CC
-Rename the files SLCache > SLCacheold and SLStore > SLStoreold
-Open LR and connected to CC
Always the same error message "an error has occurred when attempting to change modules." and cannot do anything with LR.
Now I don't know what to do anymore. Help, please.
Hello
Problem solved by activating the account root and do a fresh install of Adobe LR
Concerning
Rohit
-
How to display ONLY the photos on my hard drive and remove the duplicates it.
I bought Photo Sweeper but have heard warnings of ' reference fileis and the risk of the original photo, sitting on the hard drive. . Is there a way to see ONLY photos on the hard drive and use Photo Sweeper here?
Background: on my HP PC for years, I've created folders for each Member of our family. Thus, a paper copy of each group photo were regularly filed in each issue of people pictured in it. Migration to iPhoto and iMac five years ago, all copies of the same photo were transferred on my Mac. More recently, I've migrated my iPhotos library of Photos. I would like to clarify these multiple copies to a hard copy, but I feel of the complications and risks. In particular, the integrity of all the projects I did (for example attach a photo to the album, a book or a slide show) could be compromised if I happen to remove the copy special paper which refers to this picture (the correct term?).
It seems to me that, if I could see the actual photos on the hard drive and use the double Finder here, I could get the job done. I could combine that info (faces, keywords, descriptions) that I added on a large number of copies and sign him for a single copy and then to eliminate duplicates. Would this work? Back to a project, I could see a photo with a warning icon, a yellow triangle with an exclamation point inside, which indicates the hard drive file to which he referred is now defunct. I could (I guess I could, but how!) change things to make this photo point to rest a copy on the hard disk, couldn't I?
Tips appreciated. The notice are maybe just don't not to alter my photo library, but it says that I have almost 30 000 photos. I know this isn't so. Thank you.
Your question is not clear
What Version of the operating system and Photos you have? You have a referenced library or a managed library? What specific "warnings" topic referenced b = files you are?
Please explain what you have and what is your concern
LN
-
Original title: backup on an external hard drive
I'm trying to back up my files on an "External" hard drive It's me E: drive as the location, but it just hangs up there says "not responding". I tried to do an "Archive" in the "My Documents" folder, I saw files transfer, however all my names of my files are now blue in 'My documents' whatever that means? What drive letter should go a hard drive 'external '? I should be able to click on that drive and see what is on my external hard drive, but it doesn't "not responding"...
External drive (E :) will not name until you give him one. It is possible that the disk has not been formatted yet.
Open disk management (start > run > diskmgmt.msc > OK).
You will see something like this:You will have a line for 'Disk 2' but which shows next to your "disc 1". Please provide ALL information in the "Disk 1" line.
For example, if you had the image above, the response from you I'm looking for would be:
Disc 1 - Basic - 186,31 GB - online
Ghost images (D :) - 93,13 GB NTFS - healthy (active))
Data backup (E :) - 50,57 Go NTFS - healthy)
42.61 GB - not assigned -
When I first set up the option to Backup and Restore to backup some documents (only) on an external hard drive, I got the error message "an internal error has occurred." The parameter is incorrect. (0 x 80070057). Then when the clock reaches the designated backup time, the computer actually perform the backup. But now I am unable to open the backup center and restoration of anyway, so I can't adjust the time, I can not restore or select other files to back up. I simply do not have access to the backup and restore options. I always get the "an internal error has occurred." The parameter is incorrect. (0 x 80070057)" whenever I try. So I still can not turn off the current backup parameter, which is set to back up every night at midnight.
Hello Tjohanne
Please write to the Microsoft Forums.This problem can occur because of a bad sector at the end of the volume that you are trying to save.
However, as a workaround, you can try the following methods:
(A). if you save the backup files in the first 750 GB hard drive, you can save the backup files in the second hard drive 300 GB with the letter E to test this issue. However, if you save the backup files to the second hard disk 300 GB with letter E first, you can try to save the backup files in the first 750 GB hard drive with the letter C or D.
Run (B). disk check to check the hard drive
Note: Please make sure that the DVD DRIVE is the first boot device.
1. Insert the DVD of Windows 7 and restart the computer.
2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
3. click on 'Next' and then click 'repair your computer '.
4 Please, highlight 'Windows 7' and click 'next '.
Note: A computer can store multiple copies of Windows 7. Please highlight the one that is experiencing problems. The order of the elements in the dialog box is identical to that on the start menu.
5. in the dialog box titled "System Recovery Options", click on "Command Prompt" and type the following commands. Please press ENTER after each command.C:
CHKDSK /RNote: Please replace "C:" with the actual drive letter of the system drive on which Windows 7 is stored.
6. Please let me know if an error is detected.C. now use another backup tool to check if you can back up files on the computer correctly.
It may be useful
Thanks and greetings
Support Microsoft-dieng
Visit our Microsoft answers feedback Forum and let us know what you think
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ -
Adobe Flash CC issue "an error has occurred opening the file.
I worked on an animation last night, but when I tried to open the file I get this error that says: "an error has occurred opening the file. I am able to open my other projects flash very well, and I've been looking for a solution to my problem, but not luck.
If this file is corrupt, you can
1 rename the fla in rar > open it in winrar > click on repair > rename the rar repaired a fla > try to open it in flash pro.
2. If this does not work, and you have a working swf file, you can try using a decompiler (for example, soththink) to recreate a working Fla.
3. in case of failure, you may be able to recover a portion of your assets of fla by unrar'ing the FLA renamed in step 1.
and save again in the future, with the increase in the version numbers so that this would never entail a significant problem for you in the future.
-
Error on the Page and an error has occurred in the script on this page
Hello
Work with HR HTML X 5
Generate webHelp and pro
When I go to 'VIEW', a topic that I get the below error
An error has occurred in the script on this page
Line 41
1 tank
Error 'keywordsHelp' is undefined
Code 0
URL: XXXXXXX
Do you want to continue running scripts on this page?
BUTTONS, YES and NO)
IF I go 'NO' or 'YES' to the above, my help window opens upward, but on the status bar on the side right it will keep showing "error on page".
Help, please
Thanks to you all
KewalTo the best of my knowledge, HR inserts not all onLoad events. It seems that the model you have onLoad event (I don't know how it got there), but there is no javascript file referenced so it errors.
If you do not need this onLoad event, then pull it out, but how did get there? What is a hereditary project? Make sure that this is not something that should be there, and what's the problem, it's that there are no referenced javascript files. Talk to one of your developers, they will understand.
-
Hello, please read entire post before responding, thanks!
I had 12. Firefox (FF) something and he used with happiness when I was getting a new hard drive and start over, I decided to upgrade to the latest FF of the moment, 18.something...
After going through the implementation of all the different Add - ons etc... and reset the options/preferences (not cool how you reset all those whenever it updates!) The opening time and closing went from 2 to 4 seconds each to 78 seconds to open and 48 seconds to close. In the last two days, I tried (except reset) and read all the suggestions on here does not.
So I read up on how to uninstall completely any trace of Firefox so I could do a clean install, which did not work, either: the freshly reinstalled 18 FF. ? program still opened and closed at the same time, and had all my info despite my deleting files/sub-sub-sub-records said to hold this info. I disabled everything in FF, still no improvement, so still once I tried to find info on how to completely remove the FF and still nothing it is right for current programs.
Today I looked again for the info on how to remove completely the FF, found something new to me and tried this, including the complete registry search and remove anything with the name of firefox, then reinstalled FF 18. ?
Yet all my favorites and info was there, and when I raised my help he auto-mis updated to 19.0 without my permission, even when I don't like other decisions for me for "my good"(d'où le nom d'écran) not OK! ".So I tried the reset function to 19.0 FF and it's just that and the opening and closing time lag had gone, back to 2-4 seconds each, which seemed great!, but no.
When I went back to set up my options and restarted, FF went back to the lag, so I eventually removed/reset everything and all was well again, so I started putting/setting things back one at a time, that's when I found and verified the problem, the history settings!!!
I repeated this 6 times with the same results:
The value of history to remember, and everything works well, story custom game lag returns without fail.My settings in Custom were:
Accept and remember everything until I close FF
Clear history the closure of FF.In the "Settings" submenu under the closure of FF clear history:
All 6 boxes are checked for history and no boxes have been checked for data (all default values)I watched the process running in the task manager during startup and shutdown FF with these settings, I found that it was not only FF.exe works but also a plugin - container.exe, both eventually stop after about 48 seconds, the plugin container does not appear to run when the story is set on do not forget all the... (I have an incomplete memory on the container of plugin causing problems of this kind in the past, but I can't remember what or exactly when so much...)
I also tried to leave the setting of history to remember them all and him restarted and tried to erase everything in the menu Tools and FF unresponsive for about 60 seconds and then seemed fine afterwards.
So, I conclude that there is a problem in the newer versions with the history of compensation in the background while the browser continues to operate, and the likely culprit is the plugin container(again?)...
So now to the questions...
Is it possible to set to Custom history and 19.0 FF remain operational during this process and for FF close in a few seconds, as in FF 12. something with the same parameters of the story?
If yes how can I configure that?If no, what is the last version that will work properly with history to remember until FF is closed and then wipe front of re-opening, without waiting for more than a few seconds for everything to happen as it was in my FF12. ? Version?
Also, How do I remove ALL TRACES of Firefox 18.? and up so that I can do a clean install if I need to, as I said everything that is here or linked to from here up to today, 2/21/2013, was not sufficient.
Thanks for your time...
(See attached image) That's what worked for me to 19.0 Firefox, and I was able to verify that cookies have been deleted before restart, thanks again for your timely assistance.
Maybe you are looking for
-
Print wirelessly from skydrive
New HP Envy120e put in place easily and without wire OK but all my pictures are on Skydrive on my Ipad is there a way I can print these SkyDrive on my Ipad. There is no printing options popping up when I opened the photos on my IPad
-
I delete arcade acer direct by mystake I want to reinstall.
I remove my arcade acer direct by mistake how can I recovever. Thank you for helping me
-
Is it possible to rename devices in Momentics IDE
Hello! I develop native applications with Momentics (Cascades) IDE on my MacBook Pro. With the new Momentics IDE 2.1, it is very easy to connect multiple devices to the computer and link them with the IDE. But the way in which the names of devices ap
-
Simulator of 9550 with the issue of the interface user of Eclipse
When I use the 9550 Simulator provided with eclipse UI simulators for the 9550 wrapper (which makes the phone looks like a phone) disappeared. It's just white. I can click on the harware buttons and they respond very well. It's really strange. Is the
-
Why did - he only LR that matters to 240 instead of 300.
When I shoot, I shoot at 300. If I open in Photoshop my resolution is 300. After I have imported into LR it falls to 240. I'm doing something wrong?Thanks for any help.John