Lightroom will not stay connected for synchronization or remember user names.

Similar Questions

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Creative cloud will not stay connected. What's wrong?

  I have problems with the creative application cloud do not stay connected. This problem did not begin until recently. Whenever I click the icon creative cloud, he asks me my email and password. I would connect, but after a short period, it would disconnect again. I'm using MacOS 10.10.5 on a MacBook Pro. It's really frustrating. I have tried rebooting, and nothing I do seems to help.

  Please follow the steps below: -.

  N ° 1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Search for a file Adobe Creative Cloud (as appropriate) and Adobe Application Manager under utility window and trash both folders.

  Step 2)

  Trash Adobe Creative cloud from Applications Eh well.

  Step 3)

  (1) right-click on the icon in the Finder, then select the option "Go-ToFolder .

  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.

  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.

  Step 5)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  Step 6)

  Click on the link below and download the creative Cloud configuration file and use it to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• Skype 6.18.60.106 will not stay connected-old version works fine

  Hello

  When you use an older version of Skype, everything works great! But given that the old version of Skype now wont let me login and forces to download me use the version 'later' (6.18.60.106). This latest version will not be connected. He's constantly in "connection mode" icon. All the other internet connectivity works fine with multiple devices. ONLY this "latest" version of Skype has trouble. Cannot continue with an appeal for more than a few seconds before getting fired because of constant logout/re-connecting when you use the version "later."

  The system is Windows XP with service pack 3.

  DRM for any ideas on how to solve this frustrating problem. I use Skype as my "landline" and have come to rely on it using Skype and Skype.

  Marshal

  Try to uninstall the version 6.18 and install Skype 6.14.0.104 version:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Firefox Sync will not stay connected.

  Whenever I open Firefox, it I set up my account to sync again by typing my username and password sync key. I was under the impression that the sync account could stay connected. Anyone else know of this problem and how to fix?

  The solution I found is:

  In the Firefox Options under the Privacy tab:

  If you have the option checked to 'Clear history of Firefox closing': go into settings and uncheck the "saved Passwords" under the data section.

  Seems to be the only data that needs to 'remember' Firefox for synchronization to work.

• OfficeJet Pro X476dw: Officejet Pro X476dw will not stay connected!

  I've been struggling with my printer is connected via the wireless connection.  Recently, I thought it may be the firewall and had my disable the firewall administrator (which did not help).  I have several devices working on my wireless network, and none of them (with the exception of the HP printer) have no problem to stay connected.

  Here are the questions:

  • When I am able to connect to the wireless printer, sometimes it says connected but still does not print.
  • Connects and disconnects randomly.  So I go back in the connection process.
  • Sometimes when connection it does not recognize / 'see' my router, which is 2 feet away.  I turned off my whole system and rebooted and the printer still does not recognize the network.

  I did the following, with no relief:

  • Close my entire system (computer, modem, printer and router) and restarted.
  • Uninstalled and reinstalled the printer.
  • Reset printer factory (to start).
  • Recycled turned off and rebooted my router.
  • Confimred my router had the latest Firmware.
  • Ran each diagnosis available through HP and all he says is that it is not connected (duh!)

  My hardware is as follows:

  HP Probook s 4540, running Windows 10 (64)

  OfficeJet Pro X476dw

  ASUS AC3100, RT-AC88U router

  Please respond with any ideas/suggestions.  I really like this printer for my small business when it's working, but at this point if I can't get this resolved fine goodwill that I can't spend more time trying to get it operational.

  Thank you for your time and help!

  Thanks for the clarification!  I'll take a look and respond back!

• I have Dreamweaver CS5 with Windows 8, and it will not stay connected to the server and it says: I need flash plugin, please help

  I have a Gateway with Windows 8 computer is installed.  I installed Dreamweaver CS5 to manage my Web site, and it will remain not connected to the server.  Also, it will not play flash and said I need a flash plug-in.  Help, please

  #1, try the FTP mode passive switching power in the definition of your remote server site.

  

  #2 with the exception of a handful of gaming sites, Flash is a web technology dead.  It is not taken care of by iPhone, iPad, iTouch, Android, etc...  I don't recommend to use Flash for anything these days.  Better to use HTML5, JavaScript, and CSS level 3.

  Nancy O.

• Windows Live Messenger will not stay connected.

  Hello

  My Windows Live Messenger for the last months is not sign or when he does, he remains connected for a few seconds, this happens with both my address @msn.com.

  I tried to uninstall all Windows Live and reinstalled which didn't help, and signing any other computer has no problems. I have searched online including your forums but can't find and answer... Please don't sujest that I reinstall Windows 7 as is not an option.

  Thank you

  Hello
   
  I suggest you to post your problem in windows live community given that the problem is related to windows live messenger.
  http://windowslivehelp.com/community/
   
  Kind regards
  Umesh P - Microsoft Support

• PC will not stay connected to the Internet in the evening.

  (Moderator note: title was "network programs network networking Internet Web site Site Web Web Site URL")

  My Dell laptop that was purchased in March, 2012, had no problems to connect to the internet until recently.  Now it connects the morning, but stop connection from about 18:00.  Why is happening.  My router is Lynksys.

  Margaret,

  I guess that your laptop will connect to your wireless router.

  If your laptop loses connectivity each day at roughly at the same time (18:00), then the problem could be due to the interference of the networks your neighbor's wireless.

  There is a setting in your router for the channel to use for traffic wireless (channel 0 to 11).

  If you can find this setting, then change it. The best channels to use (with less interference) are 0, 6, and 11. Your router is probably set to one of these three (but can be assigned to any channel between 0 and 11). Change the string parameter (and try 0, 6 or 11... that we're different from the one that is currently in your router).

  If you can't control the settings of your router, try to do a google search on the brand of your router (linksys), model and word settings... you should be able to find a description on how to change the settings.

  If you want to get into more technical details, use the free utility called inSSIDer... it can be used to see exactly what interference your wireless router is your neighbors... to help see you in the selection of a channel which is not used by your neighbors.

• PURPOSE will not stay connected since update

  Since the 1.0.4 update, my AIM service remains connected. Can someone help me with this please? It becomes very frustrating.

  Thanks in advance for any assistance.

  Hello and welcome to the Forums of Palm.

  Palm he has in its system of tracking software problems. We strive to continually improve our software quality and thank you for this bring to our attention.  We are grateful to the community and evaluate options based on best practices, feedback and client software.

• Lightroom suddenly will not export JPEG for me more

  I just spent 3 days post processing almost 1,000 photos in Lightroom, finally have everything as I want it and suddenly Lightroom will not export JPEG for me more.

  The dialog box appears that says 'Export files 854'... but goes not past the first file... it is just there quietly and I see that it is not doing anything.

  Thought maybe it was all just too many... but when I select only a hand-full of images... it does the same thing.

  Perhaps thought I watered my catalog, so I created a new catalog and imported the photos of the old catalog... no change.

  Thought, maybe my whole plant is watered since that last to this day with the terrible import changes... so I uninstalled LR CC (using the uninstall program) including the preferences... and then reinstalled.

  Nothing works.

  I still have 5 Lightroom on my computer, and I could import these files in there and re - treat everything there and then export... but I just spent 3 days of treatment of these images, don't want to lose it again 3.

  I have a Macbook Pro running with a 2.6 GHZ Intel Core i7, 8 GB ram and 1 GB on the NVIDIA GPU, Yosemite and management of SSD drives... According to the requirements of the system my machine should have no problem to launch Lightroom (and I have never so far)

  Someone tell me please I can do something.

  Thank you

  Last night, I was desperate, and in the meantime someone answer this, I started to look for other threads and found those that you have linked to.

  I tried to uncheck the 'show 'Add Photos' screen', and the deactivation of the GPU acceleration... but nothing worked.

  I ended up back at 2015.1.1 and now life is good.

  Thank you!

• My mobile lightroom will not synchronize.

  My mobile lightroom will not synchronize. Repeat me test expired. How can I tell what I am a subscriber of photo program?

  Hi Keith,

  You will need to connect to LR Mobile with the same Adobe ID associated with your subscription. If you are already connected to this ID, try to connect and signing back in.

  Mike

• 5.7 Lightroom will not import. I get this message: the instruction at 0x17f3f885 referenced memory at...  Memory could not be read.  This program has been flawless for the past 3 weeks.

  5.7 Lightroom will not import. I get this message: the instruction at 0x17f3f885 referenced memory at...  Memory could not be read.  This program has been flawless for the past 3 weeks.

  Hello

  You really need a little more information such as operating system, memory, etc.

  Usually a mistake like this happens because a background process is running and interfere with the available RAM, not enough virtual memory (Windows), drivers of HW obsolete or just an incomplete installation.

  Or, one of the biggest problems is add-ons in internet browsers.

  Alternatively, another problem of Lightroom, no sufficient permissions on the directory where you import image files.

  Please provide a little more information.

• Latest version of Lightroom will not download the RAW files of my D750. How can I get around that? Purchased Lightroom for its ability to manage RAW files and now very disappointed.

  Latest version of Lightroom will not download the RAW files of my D750. How can I get around that? Purchased Lightroom for its ability to manage RAW files and now very disappointed.

  Hi mgwno,

  Native support of Lightroom for the D750 has been added in the Lightroom update published 5.7 tonight.

  Version details:

  Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html

  Camera Raw 5.7: vailable.html http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a

  Kind regards

  Pete

• Windows Vista SP2 fails to install and Windows Firewall will not stay

  Hello, I have problems with Vista 64-bit, it will not install service pack 2 and Windows Firewall will not stay. I tried to manually enable ICF manually and it won't turn. It gave me error 6x9D. I ran several antivirus scans malware byte and pc cleaner pro 2012 and the issue has not been resolved. If I could get help would be much appreciated. Thank you

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You have not installed SP1?

  If so, try a direct download of SP2.

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.