PC will not stay connected to the Internet in the evening.

Similar Questions

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• I have Dreamweaver CS5 with Windows 8, and it will not stay connected to the server and it says: I need flash plugin, please help

  I have a Gateway with Windows 8 computer is installed.  I installed Dreamweaver CS5 to manage my Web site, and it will remain not connected to the server.  Also, it will not play flash and said I need a flash plug-in.  Help, please

  #1, try the FTP mode passive switching power in the definition of your remote server site.

  

  #2 with the exception of a handful of gaming sites, Flash is a web technology dead.  It is not taken care of by iPhone, iPad, iTouch, Android, etc...  I don't recommend to use Flash for anything these days.  Better to use HTML5, JavaScript, and CSS level 3.

  Nancy O.

• Skype 6.18.60.106 will not stay connected-old version works fine

  Hello

  When you use an older version of Skype, everything works great! But given that the old version of Skype now wont let me login and forces to download me use the version 'later' (6.18.60.106). This latest version will not be connected. He's constantly in "connection mode" icon. All the other internet connectivity works fine with multiple devices. ONLY this "latest" version of Skype has trouble. Cannot continue with an appeal for more than a few seconds before getting fired because of constant logout/re-connecting when you use the version "later."

  The system is Windows XP with service pack 3.

  DRM for any ideas on how to solve this frustrating problem. I use Skype as my "landline" and have come to rely on it using Skype and Skype.

  Marshal

  Try to uninstall the version 6.18 and install Skype 6.14.0.104 version:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Creative cloud will not stay connected. What's wrong?

  I have problems with the creative application cloud do not stay connected. This problem did not begin until recently. Whenever I click the icon creative cloud, he asks me my email and password. I would connect, but after a short period, it would disconnect again. I'm using MacOS 10.10.5 on a MacBook Pro. It's really frustrating. I have tried rebooting, and nothing I do seems to help.

  Please follow the steps below: -.

  N ° 1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Search for a file Adobe Creative Cloud (as appropriate) and Adobe Application Manager under utility window and trash both folders.

  Step 2)

  Trash Adobe Creative cloud from Applications Eh well.

  Step 3)

  (1) right-click on the icon in the Finder, then select the option "Go-ToFolder .

  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.

  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.

  Step 5)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  Step 6)

  Click on the link below and download the creative Cloud configuration file and use it to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• Windows 7 (pro?) will not be connected to the non - Internet

  Summary: We do a workshop where we have set up a private network that is not connected to the Internet. We have a fleet of laptops (11 of them) that connect through an open wifi router. The router provides DHCP, and there is also a web server and database on the network server.

  We have laptops with Windows XP and Linux, as well as the Chromebook and Macs. Connect regularly and reliably. However, we had three different Windows 7 laptops of three completely different companies with the same problem. They will connect at first, but then get into a never-ending display of 'limited internet access' cycle, disconnection and reconnection.

  All three of these laptops work very well on all other wireless networks. One of the laptops is Win7 Ultimate 64-bit (not sure the others). Now, this laptop used to work perfectly, but still has this problem. Some other Windows 7 laptops have worked in the past.

  Computers portable Win7 will connect and work very well with a wired connection.

  Then... It is not a problem with the router or the network, since any computer non-Win7 laptop works perfectly. The router is started fees at each workshop, and the problem persists, but * only * on some Windows 7 laptops.

  It is probably not a problem of drivers or virus, given that laptops work fine on other networks.

  We tried to adjust our network "Preferred" and "Connect automatically" in Win7 - no joy.

  Windows 7 has a certain logic that causes the disconnection of a wireless network if he does not have an Internet connection?

  Hello

  Thanks for posting your query in Microsoft Community.

  Your question is about the web and database servers, I recommend you to post your question in the Microsoft TechNet forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  Hope this information is useful.

• My printer will not be connected to the network

  I found a few options in the Advanced menu of the printer which can be useful for various network connectivity problems that are often overlooked.

  The provided screenshots are for a printer Envy 110 and an Officejet 6500 printer has, but many models in the same range of products have similar features.

  For starters, get the IP address of your printer and load the printer in a web browser by entering the IP address as a web address.

  Once it loads, you can get something similar to one of the screens below:

  New Photosmart printer or Envy series:

  To access this screen, navigate to network > advanced.

  

  OfficeJet series printer or older photosmart printer:

  To access this screen, navigate to network > advanced.

  

  There are a few options on this screen below that are of interest.  The photosmart screen has a 802 use behavior. 11b network infrastructure and use an infrastructure network 802. 11b / g behavior options.  The first option will tell the printer to only operate in B wireless settings and second options tells operate with wireless B and G parameters.

  Most routers are set to mixed mode which is B and G.  The second activation option can help maintain the wireless connection and is certainly worth trying to help eliminate some of the problems network there.

  The Officejet screen has another option which is not available on each printer: in a network ad hoc Act bound even if others are not present.  Activate this option, if any, can help keep the printer stay connected.  Curiously, I've seen a few posts that this setting has helped with an infrastructure facility despite what says the setting.

  I hope that this information will help you to solve and prevent some network problems.

• HP Officejet will not be connected to the wireless network?

  I have a HP Officejet 6500 wireless which will remain not connected to the network over a half hour or so, max.  My wife runs a laptop XP Pro and I have a Macbook Pro with Snow Leopard.  She NEVER problems printing, but my computer is always looking for the printer unless I re - connect via the wirelss Wizard.  I also use a Westell 327W Versalink router/modem and I have connected my Mac via Bonjour, if that helps.  Any ideas out there?  I even reinstalled the router right next to the printer thinking that may be the issue.  He STILL abandons the connection, but it's funny that my wife's computer is not...

  OK, let's assume that your Mac software is correct for now.  Its probably a good assumption.

  We will define an IP address from the printer.  This can help find the network when he wakes fashion 'sleep':

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). In your case, is that 192.168.1.15 to 192.168.1.47 can use 192.168.1.50
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white. Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• OfficeJet Pro X476dw: Officejet Pro X476dw will not stay connected!

  I've been struggling with my printer is connected via the wireless connection.  Recently, I thought it may be the firewall and had my disable the firewall administrator (which did not help).  I have several devices working on my wireless network, and none of them (with the exception of the HP printer) have no problem to stay connected.

  Here are the questions:

  • When I am able to connect to the wireless printer, sometimes it says connected but still does not print.
  • Connects and disconnects randomly.  So I go back in the connection process.
  • Sometimes when connection it does not recognize / 'see' my router, which is 2 feet away.  I turned off my whole system and rebooted and the printer still does not recognize the network.

  I did the following, with no relief:

  • Close my entire system (computer, modem, printer and router) and restarted.
  • Uninstalled and reinstalled the printer.
  • Reset printer factory (to start).
  • Recycled turned off and rebooted my router.
  • Confimred my router had the latest Firmware.
  • Ran each diagnosis available through HP and all he says is that it is not connected (duh!)

  My hardware is as follows:

  HP Probook s 4540, running Windows 10 (64)

  OfficeJet Pro X476dw

  ASUS AC3100, RT-AC88U router

  Please respond with any ideas/suggestions.  I really like this printer for my small business when it's working, but at this point if I can't get this resolved fine goodwill that I can't spend more time trying to get it operational.

  Thank you for your time and help!

  Thanks for the clarification!  I'll take a look and respond back!

• Firefox Sync will not stay connected.

  Whenever I open Firefox, it I set up my account to sync again by typing my username and password sync key. I was under the impression that the sync account could stay connected. Anyone else know of this problem and how to fix?

  The solution I found is:

  In the Firefox Options under the Privacy tab:

  If you have the option checked to 'Clear history of Firefox closing': go into settings and uncheck the "saved Passwords" under the data section.

  Seems to be the only data that needs to 'remember' Firefox for synchronization to work.

• DV6Z will not Auto-Connect to the Wi - Fi connection

  HP Pavilion dv6z
  Windows 7 Home Premium

  When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

  Thank you!

  GP_01 wrote:

  HP Pavilion dv6z
  Windows 7 Home Premium

  When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

  Thank you!

  You don't need any software HP Connection Manager or Assistant wireless HP as for automatic wireless connection. Uninstall it reboot and you connect to the network using Windows network and sharing Center...

• P2V domain controller (for a test, the new virtual will not be connected to the network or used in production)

  I wanted to check that won't affect my physical domain controller by performing a P2V migration to this subject, we would like to P2V our current DC (in production) to put in our test environment, it's so we can simulate one pass from 2008 to 2012. I would just check that install VMWare converter and performing P2V migration on the active domain controller current WILL NOT affect our current physical machine.

  Can someone advise?

  DC and P2V = Don t do, since there is absolutely no guarantee that the DC P2Ved work. I had horrible experience during a migration of a data center to a new provider, the provider told us that P2V would be perfectly viable and that they had done several times. So ultimately they tested migration P2V, everything worked. Then, the day of the passage to the they did it again and AD did not come to the top. In the end we had to make a member server new rollback, as well as on the website of the provider and a classic dcpromo Setup does the job.

• Laptop computer will not be connected to the internet.

  Never had a problem with my laptop (windows 8, toshiba) until today. It's only a couple of months. I tried to connect to two different WiFi my laptop disconnects and say that the network is 'limited' I have other devices connected and know the WiFi is fine. When I plug my laptop to charge it is fine and remains connected. This isn't usually the case. What can I do?

  Hello

  Don't forget to update the drivers of network, as indicated below.

  Check with support of the system, their drivers and documentation online manufacturer and ask
  in their forums on known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ---------------

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 8 will not automatically connect to the internet

  Have a new laptop with Windows 8, and although all of the checkboxes are checked for connection automatic wifi to internet I always have to do it manually.  Reset the computer laptop back to factory settings and started from scratch but still the same problem.

  Has been of any help.

• Erroe code___My Windows Mail will not be connected to the server. Error code displayed is 0x800CCC0F

  Windows Mail connects briefly, then I get a message that the server has terminated the connection. I can't send or receive e-mails.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  They will help you with your question in the Vista Networking Forum above.

  See you soon.

  Mick Murphy - Microsoft partner