"Limit" of the screen

Similar Questions

• Lower center of the screen limits heats up

  Hello

  The lower central part of the limit of the screen of the Lenovo 3000 N100 heats, before (screen) and rear (coverage). I noticed that back this area has a crack.

  What is the solution, what I need to change the screen or cover or just need to close the crack with masking tape.

  The heat comes from the lcd inverter.
  It is a component that converts the DC voltage to AC voltage
  to power the lamp on the screen.

  A little heat is normal.
  If it becomes very hot, it may be faulty.
  If it fails, the screen will most likely turns off.
  Pretty easy and low-cost replacement in most regions.

  Due to the age of the laptop, I just wait and see.

• Is there a limit on the number of hot spots, that we can include on a screen?

  Is there a limit on the number of hot spots, that we can include on a screen? I'm putting in about 25, but it is defaulted to 10?

  Hot point quiz questions are indeed limited in the number, you can have on a slide.

  When it comes to normal blades, using ordinary boxes by clicking, you could easily have 25 or more, but then your score will be much more complex and it will not be a true quiz question.  Each separate click box can be set up to score separately.

• Several games limit left 2/3 of the screen and only game in black and white

  Original title - problem with games

  Five of the eight games on my machine here confined to the left 2/3 of the screen and play only in black and white. It's Chess Titan,

  Free Cell, hearts and Spider Solitaire, solitaire. Ink ball, Mahjong-Titals and Minesweeper work very well. I had the same problem with Netflix, but

  acting on the advice of the Csr Support, I have ununstalled and re-installed Silverlight (and had to use the Fix It program to do it). That solved the problem of Netflix

  but not the problem of games. YouTube has never been touched by this issue)

  Note: these problems two weeks ago.

  Microsoft says my video driver customer service must be updated and that I had to go so the manufacturer (Dell). I can't

  implement this driver in programs and features at all.  I don't know what made everything a video driver. It only concerns the functioning of

  (some) games?

  Any suggestions or info appreciated

  Ed Mac

  Thanks for your reply. I tried to uninstall the games, but the Turn Off function did not cooperate.

  I had the problem, however. An outfit with whom I unfortunately chose to do it remotely

  maintenance, but who are if anything more incompetent than the people of Dell installed on my machine one

  program called "Assistant pilot."  Now, it turns out I had two issues which has the same effect on Netflix and 5 of 8 games, i.e. the image limited to 2/3 of the screen and exploitation of black and white only. The Netflix problem solved when Microsoft Csr Serv me sent suggestions on what to do, which was to uninstall and reinstall Microsoft Silverlight and use the Fix It program if there were problems. Now the outfit I mentioned tried time and time again to uninstall Silverlight without success. It appears that they knew no more difficulty I did. Silverlight was the problem here, because they felt properly.

  The problem of games persisted. Microsoft Csr Serv now told me she looked like my update video driver required and suggested I have call the manufacturer, Dell. God forbid!    I know little about computers. they know less. Then I shortened myself of this pilot, a wizard who bethought

  appears on my menu. I ran the program and it came with 20 + drivers requiring an update. One was a NVIDIA driver and I was vaguely aware that they probably had something to do with it.

  Update Ran, problem solved! Note that people who have installed this program to me do not have

  Consider using it to try to solve what was obviously a video problem! Yikes!

  Microsoft stands out as the good guys here. I had spent hours on the phone with Netflix (very useful, but it wasn't their problem) and this other suit. Microsoft pointed me in the right direction without fees.

• Smooth against a move sharp objects on the screen

  Hello

  I have a number of applications that show the following behavior: when I click on an object on the display on the screen, the object moves * gently * to its position to another, predetermined by the application, position.

  I see this problem on my iMac.

  When I run the same applications on my MacBook Air the moving of objects from home position in the end still happens but in a * sudden * way - i.e. the object jumps abruptly starting position for the finals. The sweetness of the movement I see on the iMac is no longer exists.

  I love soft travel.

  Applications do not provide any parameter to control the way objects move (gently or brutally), I guess it is somehow controlled by the operating system. A parameter is defined differently on the iMac and the MacBook Air.

  (Both machines run El Capitan 10.11.6)

  Someone has an idea of what could be this setting? Or in any other way, I can have a good moving objects on the MacBook Air?

  Thanks in advance.

  FWIW, I do not know why your etrecheck report has been deleted, but you try to run applications on a 4 GB machine too. You should limit the number of objects, connect, and the number of programs you are running at the same time.

• 09 pages Document is locked on the screen

  I use a template (end 2012) Mac mini. I have 10 GB of RAM and using OS 10.11.4 (El Capitan)

  Using Pages 4.3, I have developed a document which is long, 1136 pages filled with related bookmarks and many photos, resulting in a 230 MB file.

  When I opened the file, what looks like a with blue band loading zone opens first and then my precious document comes up.  Everything looks good except the so-called box loading remains on the screen and all functions in the menu bar of the application are grey, which is inactive.  so I have to force quit the application. Then, when I try to load a small file by double clicking it, only my precious document opens and the result is the same.  In short, my pages application is now inoperative.  I rebooted the computer, opened a disk check main by using the Checker utility, tried to open this document without any other apps and the problem doesn't go away.  My document seems to be blocked at the request and the opening I can't click even the document window to close.

  My fear is that I have reached a limit with pages 09 application and I do not think that Apple in their wisdom will support 09 Pages for their latest version that I can't use because the new version support not linking them, etc, etc.

  Anyone out there can help me with this problem?   If my request has been screwed is there a way I can get a new version? that is from Pages 09

  Jack

  You try to open a document v4.3 of Pages that contain unsupported features in v5 Pages, and in addition, Pages v5 is horrible when you work with exceptionally large documents bulging with other objects (for example, pictures, or tables). In addition, Pages v5 can asked you will convert the document and is quite confused about what he has found.

  Quit all applications Pages. Restart your Mac. Make at least one backup offline of your document in page 1136.

  Right click on your document v4.3 Pages ' 09 and on the shortcut menu, choose open with: Pages (4.3).

• Spots on the screen of Macbook Pro retina (Staingate)

  Hello

  For a long time I have in my Macbook Pro retina and and a few days ago I just know that there is a site that some users have been implemented to inform this anomaly in the quality of Apple laptops Macbook Pro retina screen.

  It is very annoying and it is not a solution. However, I saw that on the www.staingate.org site all users with this problem are eligible for a full exchange of the screen.

  Do you know if there is a time limit for a full exchange of the screen? Users with more than 3 years with full screen replaced there Facebook page "https://www.facebook.com/groups/607572909386595/" and www.staingate.org .

  Thanks for your advice.

  You have until 16 October of this year, or 3 years after the original date of purchase of your computer, longer applying.

• How are checks on the screen?

  Hello

  I want to add on the screen controls to custom FCP generators and effects. How are controls in movement on the screen?

  Thank you

  Ivan

  Basically, you need to use those already provided in motion (unless you can program the FxPlug plugins).

  You'll find commands to the screen in several filters. The most common is Poke (in the set of filters of distortion.) However, * any * filter CSOS have to publish in its parameter list can be used and there are several different types. ('Exotic' favourites are blur > blur Gradient, tile > Kaleidotile and aesthetic > extrusion.)

  Create a new top-level group - rename CSO (or CSO if you have more than one). In the Group Inspector (you * must *) set a fixed resolution 2D. (Otherwise will be very unexpected effects.)

  The group selected, add filters > distortion > Poke.

  In the Inspector of Poke, find and check CSOS to publish.

  Note: the group still has a length of 0 images. You can in properties > calendar > and set the time to the length of your project (or more) or more simply, just add a shape: rectangle, circle, what is practical and then put it in the wide (or turn off the group so it does not appear). The group will have its length defined for the duration of the project (if your preferences > project > create a new layer at the beginning of the project is on or your playhead is 0.) Onscreen controls appear only in FCPX to the number of frames including the object/group parent in the timeline panel. Simply adding a filter does not add an object and filters have no length if there is nothing to act accordingly.

  Add behaviors to link to the X and the parameters Y of your object under control. (You need add separate links to individual settings, because there is a mismatch of types of settings.)

  In Wells of the behaviour Source object, add the group to the OSC. For the Source parameter in the compatible settings drop-down list, select Filters.Poke.Center.X and Y respectively.  Your object will move to the upper right corner of the canvas. At the bottom of each link behavior Inspector, there is an Offset value. Define each of these to-0.5 (which resets the object in the middle of the canvas.)

  Your object will now be controllable in FCPX with the control on the screen.

  You know how application relates to several destinations resolution and how it applies to what you were doing just a little.

  Motion (very skillfully I must add) treated all resolutions screens as having the coordinates of 0 and 1 (inclusive). No matter what draft resolution you have, SD, HD, 4 K, etc... Controls of the OSC are considered as having the same dimensions. Real pixel values are calculated from the screen resolutions for horizontal and vertical to the destination video (project) dimensions. [Fixed resolution dimensions help you determine the proportions in FCPX, but according to me, are automatically set to adapt to the target FCPX project when it is applied.] Maybe it's not always true, and if you make adjustments, then you essentially override this behavior in your specific model project. See below.]

  In the middle of the canvas to an object, as a form, etc., is (0,0), but for a CSO is 0.5, 0.5. When you create a relationship between an object and the parameters on-screen control center, you're "setting" the Center in a different coordinate system. Compensation for these values to the negative terminal of the Center value resets the position to the original 'normal '.

  Whatever he says, you can actually fool onscreen controls by setting a custom 'resolution' of the group you places in the dimensions of fixed resolution (say: 300x500pixels). So if you want to create something like a "HUD" to appear in FCPX and have the only control flow within its limits and control another object on the screen, which can be done (using the behaviors of clamp to restrict the Center.X and the Center.Y to between 0 and 1 and the OSC will remain within the limits of the resolution group fixed dimensions you set).  If you don't 'get' this still, forget about it then for now, it is not so important and has nothing to do with what you were asking. [In the case of a "HUD" type configuration, you can create another group with other CSO to control the placement of objects on the screen HUD Group, and everything in this group would be sent as CSOS, including the CSOS of the object of HUD designed... get some practice with CSO, then venture into complicated. You are only limited by what you can put together with what you have available in motion if you do not program such things at the level of the application/plugin. [Here is an example of this type of control project - it's very simple and used to define the background color: https://www.youtube.com/watch?v=jpIxuuZuko8 - it has been designed to be taken apart and studied.]

  If you build a model with CSO and the OSC does not appear in FCPX: return in movement and check that his group has length (Timing) and make sure that you have checked the box publish CSOS (and that the effect is selected in the Inspector of FCPX - click the title bar of effect).

  On the resolution fixed. Motion, by default, the account of dynamic groups - they grow and to shrink to just be the bounding box of all that they contain. By setting the fixed resolution, you force Motion to limit the group size to what you have defined. When control of the center of CSOS goes beyond the limits of a dynamic group, it acts as a multiplier of positional - and your purpose (most of the time immediately) disappears very quickly off the screen. If your initial group of the OSC has no physical object in it, it's dynamic ratings are 0 x 0 and * any * movement of the control on the screen increases by whole numbers for each pixel, it moves. If you move the OSC 1/2 pixel in any direction, the object's Center is already aligned with the edge of the canvas.

  If you have any questions, do not hesitate to ask. This topic may be a little hard to grasp until you actually out by yourself and see it in action.

• In Mail 9.2 OS 10.11.3 the limit between the list of my mailboxes mailbox and my messages keep slipping backward.  Make me feel seasick!  Can I disable this feature?  I want a stable limit!

  In Mail 9.2 OS 10.11.3 the limit between the list of my mailboxes mailbox and my messages keep slipping backward.  Make me feel seasick!  Can I disable this feature?  I want a stable limit!  (I really don't care for any of the new movements of the screen in El Capitan slide-wiggly.)  I don't know if there is

  'fixed' to try!  Help, please!

  Why do you think it is a "feature" as opposed to something to go wrong with your Mac?

  The border between my message list and the display of messages remained constant for several years now.

  Nothing moves, nothing is serrated blade.

  My mailbox list is always hidden, but when I open it, it remains a fixed width.

  I even tried the stupid "full screen" mode and could not see to do random movements, unsolicited.

  I have no idea what would cause the behavior you're seeing.

  No matter what do you do when it happens? Like maybe click on the voicemail of show/hide button?

• Keyboard and a chain of control to the screen

  I feel a strange behaviour when I use the keyboard (OSK) and a chain of control on the screen.

  I develop an application that you can use the OSK to enter some data on a touch screen with no physical keyboard. I have a Machine to States Event-Driven set up at the key event to the bottom when a word/characters are entered and the user presses the Enter key on the OSK. I noticed that if I probe the wire wuen Vcle I press the Enter key on the OSK, it appears like a back press. Not much, I thought, just to see if the Enter key is pressed and continue on.

  When I went to test my program, I noticed that my values were as if nothing has been entered. Digging a little further, I noticed that my original data are still there if I press the BACKSPACE and delete the return order. Probe string wire in the control of the chain indicates that the value comes back as an empty string in my control channel even if my entire string is physically still there. I can press the BACKSPACE (remove the carriage return) and see my original text. What, in my view, that happens, is when I press the Enter key on the OSK, it inserts something and moves my text upwards or downwards, and when I use the node property to retrieve the data in the control of the chain, I get an empty string.

  How did you get around this? I would like to hear your solutions.

  Have you tried right-clicking on the control of the chain (assuming that it is "ID mould to enter") and by assigning the value 'limit to the single line "? Sounds like your settings cause hit enter to add a line instead of the finish of your entry change. (You can also change the behavior of 'back' in your settings of LabVIew)

• How to reduce the brightness of the screen under the standard level

  Hello!

  How to reduce the brightness of the screen under the standard level in ThinkPad T520?

  I think we can somehow, but I don't know how. I reduced the brightness to zero with the Fn button + button end, but this is not enough, I want to make the screen darker, because my eyes get tired.

  The last (from Lenovo) Intel graphics driver is here:
  http://support.Lenovo.com/us/en/downloads/MIGR-77038

  This should provide a decent lower limit on the brightness. If the installation complains about the non supported hardware, force the installation using the devices and Disk Manager. (Something like this: http://forums.laptopvideo2go.com/topic/11997-have-disk-method-for-windows-7-vista/ )

  If this does not work, try f.lux (https://justgetflux.com/). It has a dimming function software (of course, he loses the contrast).

• NetBook - problems with the size of the screen when you play

  Hello, I recently got a netbook 9 "and when I try to play games on it, the entire game screen does not fit into the netbook screen.  This means that I can't play anywhere the menu or game etc controls are at the bottom of the screen. Can someone tell me if I can fix the problem please?

  Hello Janspack.

  9-inch netbooks generally have screens of 1024 x 600.  Most games have settings to choose their resolution, choose something like 800 x 600 or 1024 x 600, if they support it, and that should solve it for games that operate at full screen.

  If you talk about browser based games, unfortunately they often have a fixed resolution.  In Internet Explorer, you can go to tools-> full screen to hide the browser frame that will free up a little space, but other than that there is not a lot that can be done about it, it's an a limit to have such a low vertical resolution. I crawled off NNTP - for now. Announcement of Yeovil, United Kingdom. On the internet at www.windowsresource.net. Please post back to let us know what works and what does not. :-)

• PowerShot sx720 hs - when I zoomed in, why at the top of the screen can range up to 160 X, not just 40 X?

  Having just bought this camera, partly because of its ability to zoom, I was surprised to see the range shown on the screen, don't stop at 40 X, but continue to 160 X I just took pictures of trees in the distance at 40 X, 80 X and 160 X, and they seemed to be equally clear. This isn't, right? What understanding I'm missing? Also, is there a consensus about the disorder of the image that the device exceeds 30 X to 40 X?

  Because, in my essay, I seemed to have the good resolution of images up to the limit of my optical zoom 40K, I'll let the digital zoom on and see how much I get out of use.

• whenever I do my banking, the screen always expires until I finished

  When I do my banking online, the screen shows expired before I finished, I have to start all over again. I have

  Sites Web Bank will register you off if you do not send anything that is within the time limit, usually about five minutes.

  It is a security measure to prevent access by another account if you're away from your computer without logging. Try to send something to the website of the Bank until the period has elapsed. If you are unable to do this, contact the Bank and ask them if there is anything you can do to extend the deadline.

• restrict the orientation of the screen

  Hello

  Is there anyway I can limit the orientation of all the screen in the application in one place only to call the restriction to before each screen to push?

  See you soon

  call once and it is fixed for the entire application.