Limitation of ISE for concurrent user (same user)

Similar Questions

• I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information

  Original title: router Question.

  Hi all

  not sure if this is the right place to post but I was looking for some information about routers. specifically, I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information. specifications, etc.

  Thanks :)

  Some routers will define a limited number of simultaneous connections. Domestic routers rarely do because the assumption is that the environment will not include such a high number.

  Ideally in a commercial environment you would separate on the hardware connection since the hardware firewall. It depends on the type of connection (ADSL?).

• Is it possible to set up for multiple users on the same computer to avoid entering the e-mail and the password

  Original title: Multi users

  Is it possible to set up for multiple users on the same computer to avoid entering the email and password every time that a new user want to check emails?

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, you need help in the creation of multiple user accounts. I've surely you will help find a solution on the issue.

  What is the operating system installed on the computer?

  User accounts, several people can easily share a single computer. Each person can have a separate user account with unique settings and preferences, such as a screen saver or desktop background. User accounts control files and programs users can access and what types of changes users can make to the computer. As a general rule, you'll want to create standard accounts for most computer users.

  If you use Windows Vista or Windows 7, see the article below:

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  http://Windows.Microsoft.com/en-in/Windows-Vista/create-a-user-account

  For Windows XP users:

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783?WA=wsignin1.0

  Hope this information helps. Answer please if you have more queries about Windows.

• Hardware requirements for MS SQL Server for about 100 concurrent users

  Can someone suggest the hardware configuration required for MS SQL Server for about 100 concurrent users?

  Microsoft page suggests 2 GHz CPU and 4 GB of RAM, but it does not mention the number of users. Wonder how many users affects the performance of MS SQL.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on MSDN. Please post your question in the MSDN Windows Server forum.

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

• Two users on the same PC. How to run the application even for two users at the same time?

  Hello friends,

  I have two user accounts on my pc. Is it possible to run the same application (for example: DEFRAG or disc cleanup utlities) for two users at the same time? I mean, these utlilities work by all of the computer or user account? That would mean the same application to perform for a single user in the background and foreground to the user, or I'm totally lost in space?

  Thank you for your comments

  You should run Disk Cleanup in each user account. Do not try to shut it down or change user when defragmentation; system files may be damaged. You must stop the defragmentation, log off, restart the defragmentation and don't really no point for it. MS - MVP - Elephant Boy computers - don't panic!

• Some programs will not work for me as an administrator, but will work for other users on the same computer.

  Original title: some programs will not work for me as an administrator, but will work for other users on the same computer. I did a system restore as well as uninstalling and reinstalling programs that do not work without result.

  Did you run the System File Checker?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Try Safe Mode (you have this problem in Mode safe?).

  315222 - a Description of the Options in Windows XP (or Vista) Safe Mode boot
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315222&FR=1&PA=1&SD=HSCH

  If you cannot reproduce the errors in Mode safe see if you can further isolate the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

  Create another user and see if they have the same problem as your current user.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  811151 - how to copy user data to a new user profile
  http://support.Microsoft.com/?kbid=811151

  Description of Windows Easy Transfer for Windows Vista
  http://support.Microsoft.com/kb/928635

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

• Recommendation for the concurrent users on Aironet 1500 y 1200

  Hello

  I would like to know if there are any recommendations or technical limitation about maximum concurrent users (registered users) on AP aironet 1200 and 1500.

  Thanks in advance

  Hello

  on any model of AP, the limit is 255 associated clients.

  However, you will face performance issues before that :-)

  Hope this helps:

  Nicolas

  ===

  Remember responses of the rate that you find useful

• Setting up passwords for new users

  I am the Admin of my group. How to create a new user account (for other users) that accepts a default password (an I put) then ask to set up a new password?

  I don't have access to all the operating systems that are past their support life, but I thought that he used the same under Windows 7. Can you type net help user and see what it shows options available?  Maybe Vista doesn't.

  Here are the options I want.

  NET USER
  [username [password | *] [options]] [/ DOMAIN]
  username {password | *} / add [options] [/ domain]
  username [/ delete] [/ domain]
  username [/ TIMES: {both |}] ALL}]

  NET USER creates and modifies the user accounts on computers. When it is used
  without switches, it lists the user accounts of the computer. The
  user account information is stored in the user accounts database.

  user_name is the name of the user account to add, delete, modify, or
  view. The name of the user account can have as much of as
  20 characters.
  password assigns or changes a password for the user account.
  A password must meet the minimum length set with the
  / The command NET ACCOUNTS MINPWLEN option. It can have as
  up to 14 characters.
  * Produces a prompt for the password. The password is not
  displayed when you type it at the password prompt.
  / DOMAIN performs the operation on a domain controller of
  the current domain.
  / ADD Adds a user account in the user accounts database.
  / DELETE Removes a user account from the user accounts database.

  The options are the following:

  Description of options
  --------------------------------------------------------------------
  / ASSETS: {YES |} NONE} enables or disables the account. If
  the account is not active, the user cannot
  access to the server. The default value is YES.
  / HOW: 'text' provides a descriptive comment about the
  the user's account.  Surround the text in
  quotes.
  /CountryCode:nnn uses the operating system country code to
  implement the language files specified for a
  helps the user and the error messages. A value of
  0 means the default country code.
  / EXPIRES: {date |} NEVER} causes the account to expire if date is
  set. NEVER sets no time limit on the
  account. An expiration date is in the
  form mm/dd/yy (yy). Months can be a number,
  statements, or abbreviated with three
  letters. The year can be two or four digits.
  Use forward slashes (/) (without spaces) to separate the
  parts of the date.
  / FULLNAME: "name" is the full name of the user (rather than a
  (username). Place the quote name
  mark.
  /HOMEDIR:pathname sets the path for the home directory of the user.
  The path must exist.
  / PASSWORDCHG: {YES |} NO} Specifies whether users can change their
  password. The default value is YES.
  / PASSWORDREQ: {YES |} NO} Specifies whether a user account should have
  a password. The default value is YES.
  / LOGONPASSWORDCHG: {YES |} No.} Specifies whether users must change their
  password at the next logon. The default value is no.
  / PROFILEPATH [: path] defines a path to the logon of the user profile.
  /SCRIPTPATH:pathname is the place of the user logon
  script.
  / TIMES: {both |} ALL} this is the logon hours. TIME is expressed as
  day [-day] [, day [-day]], time [-time] [, time]
  [- time]], limited to increments of 1 hour.
  Days can be specified or abbreviated.
  Hours may be the rating of 12 or 24 hours. For
  12-hour notation, use am, pm, a.m.., or
  h ALL, a user can still log on.
  and an empty value indicates a user can never
  Open a session. Separate the date entries, time with
  a comma and split several day and time
  entries with a semicolon.
  / USERCOMMENT: 'text' Add or edit the user allows an administrator
  Comment for the account.
  / Workstations: {computername [,...] | *}
  Lists up to eight computers of
  which a user can connect to the network. If
  / Workstations has no list or if the list is *,.
  the user can log in from any computer.

• How to make a program available to all users if the program was installed for a user

  Basically, the problem is that I created another user account, but only a few random apps appear on it and I was REALLY looking FORWARD to having to reinstall some programs + 50 so my computer can function normally on my secondary account.  I am able to find a lot of programs installed by snooping around in Explorer and have been able to run some by creating shortcuts, but many of them (Spybot, Itunes, Google Chrome, THE LIST GOES ON!) nothing do when the .exe is open and are unusable (on this account).
  Also, I want to say there is no page support for Windows 7 that cover this topic (that I could find by using the provided search engine), and the more those (as for windows 2000) do not apply because they tell you to move files Windows has more, but it is a known problem and Microsoft should incorporate a simple way to add or remove accounts without uninstall/install programs just to be able to check a box... _ Perhaps there could even be an option for this in a very obvious place, as installed programs list of the filth or user account settings.

  Emzzey wrote:
  > Fundamentally, the problem is that I created another user account, but only a few
  > random applications appear on it and I was REALLY looking FORWARD to having to reinstall some
  > + 50 programs while my computer can run normally on my secondary account.
  > I am able to find a lot of programs installed by snooping around
  > Explore and have been able to run some by creating shortcuts, but a large number of
  > (Spybot, Itunes, Google Chrome, THE LIST GOES ON!) don't do nothing when the .exe
  endered useless (on this account).
  >
  >
  > Also, I want to say there is no page support for Windows 7, which deal with these
  > subject (that I could find using the search engine provided) and older
  > (as for windows 2000) do not apply because they tell you to move files that
  > Windows has more, but it's a known problem and Microsoft
  > should include an easy way to add/remove programs of accounts without
  > uninstall/install just to be able to check a box... _, may be
  > could even be an option for this in a very obvious place, like user account
  > settings or the bitch list installed programs!

  Any application that is properly designed to work on Windows 7
  either would give the person making the installation option to
  make the application available to all users, or do it automatically.
  by default. It is entirely the responsibility of an application
  programmers and out of Microsoft's control. Thus, the easiest way, of
  of course, is to use an application that is designed for a multi-user operating system.
  But, unfortunately, this is not always an option, where companies must rely on
  existing proprietary applications.

  If you install the legacy application places its shortcuts
  only in the start of the person performing the installation, all the
  You may need to do is to move these Start Menu entries to the same
  location in the C:\ProgramData\Microsoft\Windows\Start start\program
  folder and/or the C:\Users\Public\Public Desktop folder.

  In addition, such an incompatible application can offer additional
  "challenges:

  You may experience problems if the software has been designed to
  Win9x / Me, or if it was intended for Windows NT / 2 K/XP, Vista/Win7, but was
  poorly designed. Quite simply, the application 'knows' how
  manage individual user with different security permissions profiles
  e going to
  'banned' sections of the Windows registry or Windows protected
  system folders.

  For example, the saved data is often stored in a subfolder under the
  folder of the application in C:\Program Files - a place where it doesn't
  the inexperienced user or limited should never have write permissions.

  It may even be that the software requires 'write' access to the parties
  the registry or the files/folders to systems protected are not normally
  accessible to regular users. (He * didn't * happen if the application is)
  correctly written.) If this does not prove that that is the case, however, you
  often left with three options: either grant the required users
  privileges of senior access (either as users with power or local
  Administrators), explicitly grant privileges for normal users
  the relevant records and/or parts or the registry or replace the
  request by another who has been properly designed especially for
  WinNT / 2 K/XP/Vista/Win7.

  Some programs do not work if you connect limited account
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; q307091

  In addition, here are some tips suggested, in response to a
  another post, MS - MVP Kent W. England:

  "If your game or your application works with administrator accounts, but not with."
  limited accounts, you can set it to allow limited users to access to the
  folder Program files with 'change' ability rather than 'read' that
  is the default value.

  C:\>Cacls "Program Files\appfolder" /e /t /p user: c

  where "appfolder" is the folder where the application is installed.

  If you want to undo these changes, then run

  C:\>Cacls "Program Files\appfolder" /e /t /p user: r

  NOTE: On Win7 Icacls.exe gives more control.

  If you still have a problem with the delivery of the program or save the settings
  on limited accounts, you may need to change the permissions in the registry
  keys. Run regedit.exe and go to HKLM\Software\vendor\app, where
  the key of the Publisher of the software used to your own
  program. Change the permissions on this key to allow users full control. »

  --

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot

• Client AnyConnect and connections without client hang for two users

  ASA 5525, v.19 9.1 (5)

  AnyConnect client 3.1.02026

  I have two users who are unable to connect through the AC client or no client via the web portal. The use of the client, it will get stuck in a loop of "check updates". On the portal, the connection will proceed to point "Cisco Secure Desktop validated successfully... Success... Reloading... Please wait. "Then it crashes here.

  This problem occurs for the user, no matter which company laptop it connects to. A help desk technician can use his laptop computer and connect properly, but she could not connect on his own laptop computer or on another laptop. (Same for the other user.) So the question does not appear to be linked to his laptop or the installation of the CA. (Helpdesk reimage her machine early in the process of solving problems before they realized that the question seems to follow the user.)

  I've updated the hostscan - no change in the results file.  Client and clientless connections seem to work for all users. We are puzzled.  Suggestions, anyone?  Thank you!

  The LDAP protocol must be people - Active Directory server.  Chances are the one who manages the SAA should have access at least to look at Active Directory to look that up.  If they are not they need.

  Of course, I don't know a lot about what you use the devices, but if you use ISE, there should be a type of device MNT (monitoring and troubleshooting) - collecting newspapers and, hopefully, they are sent to a certain type of overall collection of syslog (splunk?) tool.

  Otherwise, there should be a device called a CAM (Clean Access Manager) who collects newspapers - which can also be spread to a global tool for syslog - but with cam, you can pull reports from the output in a file delimited by commas (.csv) and pass through them that way.

  -The thing that annoys me, is he gets to two users any computer, they try to connect to any network to which they connect, and other users can authenticate and access network on these same devices.

  -That is why it is rather confused.  Pretty much saying, there must be something with:

  -the pool of intellectual property that they get an IP of

  -their powers AD

  -user name

  -something in this sense, if the information provided is accurate.

• Updates instead of inserts by using getNavigatableRowIterator () .createRow (); Concurrent users?

  Hello

  Summary

  My application only occasionally an update on an existing line, rather than create a new line.  Seems to occur when several people create new lines.

  Details

  My application creates a new line by making a PopupFetchListener create a record.  The popup gets 3 user input fields.  By clicking on OK validates the data.  But sometimes the app by mistake updates an existing line with 3 field entries, rather than create a new line.

  We call cela error "crush."  We believe that this occurs when 2 or more users create lines at the same time (but we're not sure).  Behind the pop-up window, we see the ADF table with the lines.  He opens a line and creates a new record with the key field with the value "-1".  It is the default value that we give to the view object.  If three users create a new line, sometimes two of the user see the-1.  The other user does not see a new slot open.  Instead, the focus is always on a line that exists.  This poor third user gets error crush.  We can only reproduce this problem sometimes.  Any ideas?  Here are more details.

  Setting the primary key of the Entity object

  < attribute name = 'AiId' IsNotNull = "true" ColumnName = "AI_ID', SQLType = 'DIGITAL' Type ="java.lang.Integer"

  ColumnType = 'NUMBER', TableName = 'GA_AIM"PrimaryKey ="true", DefaultValue ="-1"RetrievedOnInsert ="true ".

  RetrievedOnUpdate = "true" IsUpdateable = "while_insert" >

  < DesignTime >

  < name Attr = "_diagramName" Value = "Id" / >

  < / DesignTime >

  Properties of <>

  < SchemaBasedProperties >

  < value DISPLAYWIDTH = "60" / >

  < ResId LABEL = 'model. Entity.GaAim.AiId_LABEL"/ >

  < / SchemaBasedProperties >

  < / properties >

  < / attribute >

  Database trigger

  The Insert Before, gets a sequence counter and replaces the value "-1".

  Code FetchPopupListener

  DCBindingContainer bindings1 = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding dcib = (DCIteratorBinding) bindings1.get (iteratorName);

  RowSetIterator iter = dcib.getRowSetIterator ();

  NewRow row = dcib.getNavigatableRowIterator () .createRow ();

  newRow.setNewRowState (Row.STATUS_INITIALIZED);

  Code of the button 'OK '.

  BindingContainer links = getBindings();

  operationBinding oracle.binding.OperationBinding = bindings.getOperationBinding ("Commit");

  Object result = operationBinding.execute ();

  Environment

  JDev Studio Edition Version 11.1.2.4.0

  WebLogic 10.3.5 on Linux

  ADF BC

  Also tried

  Unchecking 'Required' attribute AiId Pavilion in the E.O. and hide the - 1 as a default value.  It is under the theory that the middle tier strives to ensure the uniqueness of the primary key, and two concurrent users had '-1 '.  It has not solved the problem.

  Your assumption that you get this problem if multiple users create new tires is correct. The problem is that you have defined the pharmacokinetics of new line - 1 for each line. This will get you in trouble.

  You must either use the DBSequence as type for your pk (http://docs.oracle.com/middleware/1212/adf/ADFFD/bcentities.htm#ADFFD19777), or you must assign the pk directly when the line is created (for example using groovy https://tompeez.wordpress.com/2011/09/02/using-groovy-expression-to-set-a-primary-key-with-a-sequence-number/).

  Timo

• The package of creative cloud ready for simultaneous user on VDI puts (Virtual Desktop Infrastructure)

  I would like to know if Adobe Creative Cloud package is ready for the concurrent users on VDI (Virtual Desktop Infrastructure) environment?

  Good response in my College email. Thank you!

  [email protected]

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else

• For each user login different landing pages

  I created an area on my site successfully (in DW CS6) (which takes the user name and password of a database), which works perfectly (including 'logout' and 'restricted page' server behaviors added etc.)

  However, I am puzzled trying to find how to set up for different users can be redirected to different 'allowed zones' depending on what username they enter. That is to say 1 connects and is redirected to pg X and company 2 connects and is redirected to pg Y

  Dreamweaver won't let me specify one page. I tried google, but it make me feel a bit confused with the jargon. As it is not clear when you do your site in dreamweaver (CS6)

  Does anyone know steps to DW and phpMyAdmin which would redirect users based on their user name in a data base.

  My site is here in case you should see: http://www.reese-test2.co.uk/download.php

  Thanks for your help

  Sara

  Sara.Reese wrote:

  Hi Ben, there are 3 users, each with their own home screen

  Added a manual condition whenever is fine, as the majority of our customers 1000 + will be all be redirected to the same 'standard' homepage Its only a select few of our 'special' customers, who will have their own login and the home page (for Advanced clients).

  I tried with the above code to do this, but I don't think I was sticking to the right place as it was a mistake

  On my database (phpMyadmin) I've already implemented 3 columns: company, username & database, example below:

  

  Most of our clients will get the same username and password to enter the same homepage

  You can do it for a limited number of users;

  First, he must add "society" to the query.

  $LoginRS__query = sprintf ("SELECT company, user name, password AND password OF connection WHERE username = %s is %s",

  Then you need get the "society" based on the name of user and password:

  $LoginRS = mysql_query ($LoginRS__query, $searchDB) or die (mysql_error ());

  $row_rsDetails = mysql_fetch_assoc ($LoginRS);

  $loginFoundUser = mysql_num_rows ($LoginRS);

  And then the last piece of php code should look like below:

  Only 3 companies in the database to GET their 'dedicated page' - all the others will go to normal.php if they provide the name of user and password correct.

  If (isset($_SESSION['PrevUrl']) & false) {}

  $MM_redirectLoginSuccess = $_SESSION ["PrevUrl"];

  }

  $company = $row_rsDetails ['company'];

  If ($company == 'standard') {}

  Header ("Location: standard.php");

  }

  Else if ($company == 'Advanced') {}

  Header ("Location: advanced.php");

  }

  Else if ($company == 'super') {}

  Header ("Location: super.php");

  }

  ElseIf ($company! = 'standard' | $company! = 'Advanced' | $company! = 'super') {}

  Header ("Location: normal.php");

  }

  }

  else {}

  Header ("Location:".) $MM_redirectLoginFailed);

  }

  }

  ?>

• Tests with concurrent users on HTTP Web load

  Hello
  
  I'm trying my PHP Web Application load testing.
  
  I record (with Firefox) and developed the test with OpenScript script,.
  but I found that I could only test with function "Iteration".
  
  Is it possible to do load tests with concurrent users (connection of users at the same time multi) defined in the database?
  
  Thanks for help.

  Hello

  You need to load the script in BTA (Oracle Load Testing) you can download it from here , you have the first link Oracle Application Testing Suite and run the OATSxxx.exe to install the BTA.

  Concerning

  Alex

• How to get an extension of the dictionary for all users in a Citrix environment?

  Hi all

  Under title, I'm looking for a way to get out a dictionary of Firefox (specifically the English (British) of https://addons.mozilla.org/en-US/firefox/language-tools/) to all users in a Citrix environment. Comprehensive silent installation is absolutely best. Because following a recent installation of Firefox users report that this spell check is not working, what appears as a result there is no dictionary to check the spelling on the facility.

  It's in a corporate environment, running 6.5 XenApp hosted workstations to multi-server Windows 2008 R2 Enterprise x 64, the installed Firefox info below as collected by the add-on troubleshooting pulled from the browser in the test environment with the same characteristics.

  So far, I have tried what follows from this link: http://kb.mozillazine.org/Installing_extensions

  "A whole installation will install an extension in the directory of the application rather than in a profile so it will be available to all users. To perform a whole installation, you must not activate as within your Mozilla application installation file. Instead, download and save this record and make sure you close the application completely.

  Then follow one of the following options:

     Copy the .xpi file into the <installation directory>\extensions folder. When you start your Mozilla application again, it displays an installation dialog, asking "The following items were found in your Extensions folder. Do you want to install them?" "
  

  Although it seems that the < installation directory > \extensions folder no longer exists at the given location. Find a path of the < installation directory > \browser\extensions but seems it does not behave as said here that I have not received all of the guests. I hope that this method is still applicable in some way and I am just not aware of how this is currently supposed to be handled, but not sure if it is a dictionary rather than a typical add-on will have no effect on the installation overall how can be reached.

  Have also tried to http://forums.anandtech.com/showthread.php?t=2268437 , which seems a pretty basic option, but this would have not only to a lot of work to do on a per user basis, but there are also restrictions in place to prevent access to the records of users AppData.

  Finally I was looking https://support.mozilla.org/en-US/questions/740545 to push this point across: the les parametres parameters configuration, then use the method above to enforce this on the user end, but did not find anything me.

  Any help/advice/shots of elbow in the right direction would be greatly appreciated.

  It might be easier to extract the files of two dictionary (.dic and .aff) of archive XPI (ZIP) and place the two files in the folder of Firefox profile for the dictionaries available for all users.