Limitations of size for Panorama in Lightroom CC

This note is to encourage Adobe to expand the limits of size of the panoramas of Lightroom CC.  I understand that this limit is a maximum length of 65 000 pixels or a maximum number of pixels to 512 million pixels.  Such a limit does not get wide angle with long focal length objectives to get extremely high resolution panoramas.  For example, a 100 mm lens on a sensor 24 x 36 mm is turned to vertical orientation (24mm width) requires about (ideally) 26 frames to make a panorama 360 degrees.  If you use a device 50 megapixels (e.g. Canon 5 d), this image will be approximately 150 000 pixels wide or nearly three times the current limit.  There are also approximately 1300 megapixels, even once about three times the current limit.  This means that a Canon 5 d can be used to make even a panorama of 180 degrees, with a goal of 100mm in the vertical direction.  Creation of panorama in Lightroom CC is fantastic because it is easy and results in a RAW image.  But the current size limit is a real constraint.  Thank you for your attention.

Hi Blaine Beron-Rawdon.

Greetings!

Thanks for writing this.

I'd really appreciate it if you can set this as a feature to Photoshop community customer family request

Concerning

Jitendra

Tags: Photoshop Lightroom

Similar Questions

  • Satellite A200-1AG - Limitation of size for the new HARD drive?

    Hello

    I want to improve my laptop with a new hard drive. It came with SATA 150 GB and I want to get a 320 GB Western Digital HD. Never changed the disk in a laptop and I don't know if there is no restriction on the voltage, overheating...

    Any help is appreciated. Thank you!

    Hey U-mass,.

    There is no limit of capacity as on the old IDE interface on the new SATA interface. This means that you can buy this 320 GB HARD disk or another HARD drive. Each 2.5 HARD drive to SATA interface is theoretically possible to use.

    One more interesting thing is RPM HARD drive. There are hard drives with 5400 RPM and 7200 RPM. The latter is a little faster but needs more power and produces more heat. Normally, 5400 RPM is sufficient

  • Photoshop CS6 does not generate a panorama on lightroom

    When I select a bunch of photos in Lightroom 6 and select starts it Lightroom "Merge to panorama in Photoshop" option does the ordinary thing and preparing an export. Photoshop wonder how to merge (type of Pan) and after that... Nothing! Nothing happens in photoshop (Nothing in Lightroom)
    This function is always use to work like a charm, but all of a sudden, nothing...

    Lightroom still whining about an update of the plugin cameraRaw (who does not appear in the adobe Update Manager).

    So, I'm lost...

    With a deadline breathing down my neck, I installed the trial version Photoshop CC and that works very well, but... I don't want to spend a monthly fee for 2 programs that I bought as standalone and are perfectly fine to use.

    So I fixed it for now, but after 30 days expires the trial and I have no idea why photoshop behaves like that.

    Before this problem (last Friday) Photoshop started having problems with the photo full-size (also panoramic) and as a last resort, I reinstalled photoshop. Hoping that it was just a bug... But he seems to have created problems more (or more).

    Does anyone have an idea how to fix photoshop (apart from buying a monthly package from adobe)

    I'm working on Windows (Photoshop CS6 and Lightroom 6) 10

    Thank you!

    Hello

    • Problem solved by the new facility.
    • Uninstalled all adobe applications and him deleted all the files from adobe.
      • % temp %

      • C:\Program Files\Adobe *.

      • C:\Program Files\Common Files\Adobe *.

      • C:\Program Files\Common Macrovision Shared

      • C:\Program Files (x 86) \Adobe*

      • C:\Program Files (x 86) \Common Files\Adobe *.

      • C:\Program Files (x 86) \Common Files\Macrovision shared

      • C:\ProgramData\Adobe*

      • C:\ProgramData\FLEXnet

      • C:\Users\\AppData\Roaming\Adobe*

      • C:\Users\\AppData\Roaming\com.adobe.*

      • C:\Users\\AppData\Local\Adobe*

      • C:\Users\\AppData\LocalLow\Adobe*

      • C:\Users\\AppData\Local\VirtualStore\Program Files\Common Adobe *.

    ~ Best regards

    Rohit

  • Strips of sky dark panorama fusion Lightroom

    In most of my panoramas of Lightroom merged, I get bands of darker sky colored on the seams of the merger. I guess that this is because the vignetting of my lens? How can I correct/preventing this problem? Thank you

    P4071553-Pano-2.jpeg

    I suggest that you do not use the polarizer.  The amount of polarization (darkening) of the sky changes as you change the angle of the camera of the Sun.

    In addition to manual exposure, you must also use the manual focus to prevent the camera focus for each shot.

    Finally, I suggest you use optical correction on each ball in Lightroom before gathering in a pano to remove the vignetting.

  • Hi, my places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this. Visited links are is more changing color.

    Hello
    My places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this.
    Suddenly the visited links don't change is no longer the font color, that I prepare for an exam, I need visited issues to change color, to follow up on issues that I ended. But if I delete a few days of history, then again once, most visited links change color and then it stops, it seems that something is getting full and not able to accommodate more? Why my visited links don't change color after a number of visits? I would like to make a back up of the file places.sqlite. So I tried everything to remove the profile, uninstalling reinstalling, creating a new profile, and then copy paste places.sqlite etc, but as mentioned after a few visits, visited links is no longer change color, if I delete a few days in history and then a few visits is again change color and then stop again, so what should I increase so that my quota of visited links is increased , I also tried tweaking about: config and there has been no result. Although I was not really convinced that _pages growing brower.history_max (don't remember the name, but I'm sure you get the idea) will help.
    Seems that while my visited links change color, quota is met and only if I delete the history of a few days will I get some links most visited to change color. Can someone enlighten us? As mentioned that my places.sqlite file size is 30 720 KB so I think maybe this has something to do with it? Would be very grateful if someone could help me. Thank you.

    Sorry it is not looking good.

    1. Unlike bookmarks history is not saved in Firefox.
    2. There is a possibility using Windows.
    3. Sync is not expected to back up things until the synchronization server
    4. If places.sqlite does not sort itself you may have to re-create remove it. You will lose your history, but can still access indirectly IF you have saved a copy of the appropriate
    5. Different databases to try to create new profiles
    1. History
      is rather less robust than bookmarks, you should deliberately somehow return it upward, but it's too late now
    2. Earlier versions of Windows
      This is really the last chance. Make sure you have some places.sqlite you saved. Always before and after any attempt to restore the backup. Windows must be able to provide a previous version. One of these versions may be usable as is; or can be used after a repair with housekeeping. Of course, this is not the latest version but it should help.
    3. Sync is not a server backup service.
      Sync is intended to save on another device, no backup is the fact that the second device then contains synchronized information. IIRC Sync development ceased, and the replacement when available may include a server backup option.
    4. Recreate the database of bookmarks (including history)
      Unfortunately, recess can only use saved bookmarks, there is no saved history to use. Once the database is re-created, it will continue to store the history but it loses the existing history. This time take steps to save on a regular basis.
    5. Use the new profiles for database testing.

    To simplify comparison of the results of the database different files create one or more new additional profiles. Then try to smash the places.sqlite file into the test profile with any other places.sqlite, you want to try. Allows you to directly compare the databases, without seeking to use sync and without changing the Firefox profile work unnecessarily. You can keep a reference profile of studies with the best of the profiles of any shows results of history; According to the best recreated or corrupted database is.
    • Use the Profile Manager to create and delete profiles Firefox
    • CARE, do not rename or delete profiles created once or use anything other than empty folders when they are created. Don't nest in the other profiles. (At least until you know exactly how it behaves - post back if you never consider such actions)
  • I made my largest site and how can keep the same size for all other sites?

    I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?

    You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Each page is a zoomed out, and if I Zoom it, it is a normal size for a while, but when I close firefox and open it again, it has zoom out again, I have to zoom each page everytime I open a new page.

    Each page is a zoomed out, and if I Zoom it, it is a normal size for a while, but when I close firefox and open it again, it has zoom out again, I have to zoom each page everytime I open a new page.

    How to use Zoom?

    The function Zoom of Page Firefox does a level of field by field to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox. Try these extensions:

    -> Default FullZoom Level 4.5

    -> NoSquint 2.1.2

    Check and tell if its working.

  • Set the font size for the target PCs ONLY

    I know that I have to include a custom ini file to specify the name of the font AND size for target PCs (those where the EXE is executed).

    For example

    appFont = "Tahoma" 13

    dialogFont = "Tahoma" 13

    systemFont = "Tahoma" 13

    Is there a way to specify only the size of the police and not the name? (i.e. I want to use the specific font for a given PC, but I would like to put its size).

    I tried with

    appFont = 13

    but this setting is ignored.

    When I used

    appFont = '0' 13

    the size was successfully set, but what is the '0 '?

    Hey Vix,

    Yes, I think it will work.

    You could confirm the fact,

    The default Application police is the police of the Box of Message which is respectively Segoi UI and Tahoma for XP machines with Windows VISTA. To check this on a Windows XP-based computer, follow these steps:

    1. "" "Open Start" settings "Control Panel" display
    2. Click on the appearance tab, Advanced
    3. Select the Area of Message of the point: drop-down menu
    4. The police will appear in the are: drop-down menu

    .. the police exchange between '0' and Tahoma for example...

  • DDR3 maximum size for HP Mini 110-3546tu PC

    Hai all the...

    help me brother & master

    I want to upgrade my computer laptop ddr3

    but the idon't know how to maximum size for laptop PC series ddr3

    HP Mini 110-3546tu PC

    Thank you all

    Hello:

    Here is the link to the service manual for your laptop.

    http://h10032.www1.HP.com/CTG/manual/c02842192

    Info upgrade memory are in Chapter 1, page 2.

    Max is 1 x 2 GB chip.  You must remove the memory 1 GB chip and replace it with a 2 GB memory chip.

  • What size for hp deskjet f 4480 cartridge

    What size for hp deskjet 4480 cartridge

    Hello

    Please find below the information related to the ink cartridges.

    Ink cartridge HP 60 Tri-color (CC643WN)
    Black ink cartridge 60 HP (CC640WN)

  • I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

    I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

    Hello notnewbee,

    Thanks for posting on the Microsoft answers Forum.

    You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
    you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

    If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
    The information below will show you how you can make older programs run on Windows 7 here.

    If please reply back and let us know if this helps solve your problem or if you still need help.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Can I reduce the size of the pagefile, or does this size for optimal performance of the rig?

    Hi all.

    I recently increased my memory of 4 GB to 12 GB.  I noticed that my pagefile has increased in size that corresponds to the installed memory.  Can I reduce the size of the pagefile, or does this size for optimal performance of the rig.

    See you soon.

    Original title: size of pagefile.

    Swap files are always important. UNIX, Linux, MacOS and Windows all set up to Exchange files and use them. Some applications also require the existence of a file...

    The only people who need to limit the size of pagefile are those whose disk space is very valuable to the critical operations of mission currently running on the computer.

    Do not be fooled into thinking that the loading RAM is the best option, because it's not like people in the above paragraph you would say.

  • What is the best size for the gigantic memory file pagefile.sys virtual?

    pagefile.sys is gigantic 8 GB of files in Windows 7, I want free space of HDD on my SSD for faster backup purposes, but I don't want to hinder the performance that comes first.

    I have 8 GB of DDR3 memory. What is the recommended size for the pagefile.sys for optimal performance?

    Tuesday, April 6, 2010 20:44:59 + 0000, EcoWhale.com wrote:

    > I wonder what would be the best size to choose for the performance as I have 8 GB of physical memory (assuming an SSD with a lot of space)?

    I recommend leaving it alone and let windows decide for himself,
    rather than make any custom setting. It works very well.
    Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
    Ken Blake

  • Power Toys Image Re sizer for Windows 7 64 bit - WHEN! When it will be redesigned for Windows 7?

    I like windows 7 - I don't understand why the hell Microsoft does not have staff of digital photo or feel that he is not a necessity - was not necessary - to include the image resizer (such a small but effective and useful point) in windows 7.

    Let me first start by saying:-I know there are other programs out there are perhaps those who are still free which is re-size of the images. This question goes to those who normally use, or perhaps use the toy of the power of Microsoft which has a Re sizer image and they want - if you do not change the pictures or knows no image editing etc.... Please pass this question...

    I like windows 7 - I don't understand why the hell Microsoft does not have staff of digital photo or feel that he is not a necessity - was not necessary - to include the Re sizer image (such a small but effective and useful point) in Windows 7.

    I am convinced there is no staff person at Microsoft who have an interest in photography because Microsoft has not come out with anything that looks remotely Digital Image Starter Edition and/or Suite or similar since it was released in 1996. It was 14 years ago. Think of the interest for photography and photography giant growth and product photography, etc... all this seems to have escaped to the spirit of an entire society for more than a decade. How is that possible? Then Windows 7 comes out, and with it, not a single program remotely associated with this boom in the huge market that is PHOTOGRAPHY and all that it encompasses. Not even the new SIZER IMAGE that Microsoft added to XP and was a hands down... feeling! Not in Vista and millions of complaints/requests to bring to the rear for - recycle for Vista - all ignored for the next 3 years - not in Windows 7. During this time... Mac sales are sky monte skyrocket. Was this all just too much to ask a simple society... couldn't you have at least thrown buyer of Windows 7 a bone and include the Power Toy Image Re sizer you missed in Vista and add it to Windows 7? I've read articles where other people say the same thing, I am at the moment - all eager to know W H Y?

    The digital camera - videos - etc... the industry has exploded with new technologies and became 'the' new obsession/hobby/interests of thousands or even millions of people - make the pro little people who cared too long at all if they captured a moment on film. How does this "boom" (if you want) in the interest of this leaflet thought eyes and the thoughts and minds of ALL the creative staff at Microsoft... it's amazing really - who are the spirits of power/creation at Microsoft for lack of a better term - IDIOTS... My God - no one is STUPID THAT... because it is simply STUPID.

    If Microsoft (and Microsoft is probably) a SILENCE behind closed doors with say ADOBE to promote ADOBE and AGREEMENT at the same time works back to create whatever it is perhaps at a more reasonable cost that are competing directly with ADOBE and others - and then go out with him... because it's really make Microsoft look STUPID and God knows they have accumulated more than way too many "STUPID" already in the years - come clean on this because this is a HUGE BEAST. And PLEASE... If you're not going to acknowledge the industry of digital image which is 1 million miles ahead of you already - please at least... re-the Power tool Toy "Image Re-sizer" for Windows 7 64 bit... which may not be so difficult or too much to ask - and if the statements that I made in this message are not sufficient reason - then please read thousands of blogs. etc... there where others wondering the same thing of you / Microsoft. Maybe the others they did on one your kinder, gentler. ?

    Hello

    I suggest you follow the link on the resizing in Windows Live Photo Gallery.

    http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

    You can also leave your comments to Microsoft on a Power Toy resizing tool, updated at the link below.

    http://connect.Microsoft.com/

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I use Hotmail on Mac and don't know how to increase the font size for my mails etc. You use the zoom + is only temp for the session. Suggestions please.

    I use Hotmail on a new Mac and don't know how to increase the font size for the display of my email. you use the zoom + is only one temp. Suggestions please.

    According to the format your help,.

    Hotmail format,

    Click Options at the top right,

    Then more options.

    Writing e-mail / click on fonts and signatures.

    Make you choices and save.

    New format for Outlook.com,

    Click on the gear in the top right, symbol

    Click Options,

    The options are almost the same.

    For more entries change your question and move it to the section of Hotmail, Messenger, and skydrive.

    Search by all subjects,

    Section Outllook.com or hotmail.com.

Maybe you are looking for

  • Is the Airport Express optical fiber compatible? (Verizon Fios)

    Is the Airport Express optical fiber compatible? (Verizon Fios) Verizon wants me to have one of their routers. Is it necessary if I already have an AirPort Express?

  • Satellite A200: How to do a print screen?

    I tried many combinations of keys to try to take a screenshot without success.The manual does not cover the topic so I'm hopig someone on here may be able to help me please.My model is A200 - 1VP. Thank you very much.

  • Satellite M30: brightness adjustment is no more in Vista

    Hello I recently upgraded to Vista Ultimate and I found that the brightness on my Satellite M30 controls no longer work. If someone has had this problem and know of a fix for this. Previous operating system was Windows XP Home. Concerning Alex

  • Getting error code = 0x8000ffff: catastrophic failure COM + internal information Services.

    {Original title: 02D4B3F1-FD88 - 11 D 1 - D 960-00805 FC79235} Hi, I am getting following error messages: Please advice. A condition occurred that indicates this COM + application is in an unstable state or does not work properly. Assertion failure:

  • ASA + no local lan access

    Hi all I have an ASA 5510 configured, when I try to connect to my asa fom the VPN client I can connect but can not reach my internal network. I have attached the running configuration, if anyone has an idea please let know me. Thank you