Limiting the flow and speed of export

Similar Questions

• Understanding of the flow and steams AQ and AQ

  I use 11g.
  
  Can you explain the differences between currents / vapours QA / QA / standard queued?
  
  
  
  Thank you

  AQ (Advanced Queuing) is an enabling technology that flow is based on top of. You can write applications that use AQ without using water. You cannot use streams without the use of QA.

  Originally, streams and AQ were distinct projects. Recently (I mean in the span of 11g, but I don't guarantee that), the designation of the two products have been grouped. I guess it's because that water is the main way that QA is used so it was logical to combine just the names. But because AQ was long regarded as a separate project, there are a lot of references to the 'flow' and the 'AQ' separately in older documents, or when people are not thinking in terms of Oracle approved a Naming Convention. For example, I almost never use "Streams AQ" because my brain still has the two separated. I guess in 3 or 4 years, I'll think of it as "Streams AQ", which means that Oracle will want to just rename by then (most likely to incorporate GoldenGate).

  11 g, water courses is available in the standard edition, but there are limits. For example, you can apply changes to an Enterprise edition database in the standard edition. But your capture options are limited to synchronous if my memory serves. Licenses for 11g Guide has more details, and there are some documents on Metalink that go into details.

  Justin

• I'm trying to export contacts as vcards icloud.  However, after that select the contacts and click on "Export as vcards" nothing happens.  Why?

  I'm trying to export contacts as vcards icloud.  However, after that select the contacts and click on "Export as vcards" nothing happens.  Why?  I tried this using edge and chrome and I run Windows 10

  I just tried with edge on Windows 10. I selected all the contacts, and then click Export, as vCards and nothing happen. Clicked on it again, still nothing. After 4 or 5 click on about 10 to 15 seconds he finally uploaded to the file Edge uses for downloads. I saw it happen before you go to a Mac using the Safari browser, but only 2 clicks were necessary.

• Should we leave how much free space on the C drive before affecting the performance and speed?

  Hello!

  Hard drive of my new PC (C) is 1 TB (processor Samsung 7i, Windows 8.1). It doesn't have any other disk/partition. How this space is safe to use to store large files (videos, esp., stored in the native video library file) without harming the performance and speed?

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Thank you!

  Anna

  Sunday, March 1, 2015 10:59 + 0000, AnaFilipaLopes wrote:

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Planning your Partitions

  The Question

  Partitions, how much should I have on my hard drive, what do I use
  each of them for, and what size should each one be?

  It s a common question, but unfortunately this doesn t have a
  only simple, just answer to all the world. A lot of people will respond with
  the way they do, but their response isn't necessarily best for the
  person seeking (in many cases it isn't right even for the person)
  response).

  Terminology

  First, let's rethinking the terminology. Some people ask "should I".
  partition my drive? That s the wrong question, because the
  the terminology is a little strange. Some people think that the word
  "partition" means divide the drive into two or more partitions.
  That s not correct: to partition a drive is to create one or several
  partitions on it. You must have at least one partition to use
  He who think they have an unpartitioned disk actually
  have a player with only one partition on it and it s normally
  Called C:. The choice you have is to have more than one
  partition, not that it's the partition at all.

  A bit of history

  Back before Windows 95 OEM Service Release 2 (also known as Windows
  95 (b) was published in 1996, all MS-DOS and Windows hard drives have been set
  using the file system FAT16 (except for very tiny to aid
  FAT12). That 16-bit only because were used for addressing, FAT16 has a
  maximum 2 GB partition size.

  More than 2 GB of hard disks were rare at the time, but if you had
  one, you must have multiple partitions to use all the available
  space. But even if your drive was not larger than 2GB, FAT16 created
  Another serious problem for many people - the size of the cluster has been
  more great if you had a larger partition. Cluster sizes increased from 512
  bytes for a partition to no greater than32Mb all the way up to 32 KB for a
  partition of 1 GB or more.

  More the cluster size, the space more is wasted on a hard drive.
  That s as space for all the files is allocated in whole clusters
  only. If you have 32 KB clusters, a 1 byte file takes 32 KB, a file, a
  greater than 32 k byte takes 64 k and so on. On average, each file
  about half of his last group waste.

  If large partitions create a lot of waste (called "soft"). With a 2 GB
  FAT16 drive in a single cluster, if you have 10,000 files, each
  lose half a cluster of 32 KB, you lose about 160 MB for relationships. This s
  back in an important part of a player that probably cost more than $400
  1996 - around $ 32.

  So what did the people? They divided their 2 GB drive in two,
  three or more logical drives. Each of these logical drives has been
  smaller the real physical disk, had smaller clusters, and
  so less waste. If, for example, she was able to keep all the partitions
  less than 512 MB, cluster size was only 8 KB, and the loss was reduced to a
  a quarter of what it would be otherwise.

  People partitioned for other reasons also, but back in the days of
  FAT16, it was the main reason to do so.

  The present

  Three things have changed radically since 1996:

  1. the FAT32 and NTFS file systems came along, allowing a larger
  partitions with smaller clusters and so much less waste. In
  with NTFS, cluster sizes are 4 K, regardless of the size of the partition.

  2 hard drives have become much larger, often more than 1 TB (1000 GB) in
  size.

  3 hard drives have become much cheaper. For example, a 500 GB drive
  can be bought today for about $50. That s 250 times the size of this
  Player 2Gb typical 1996, about one-eighth of the price.

  What these things mean together which is the reason to be old to have
  multiple partitions to avoid the considerable wastage of disk space left.
  The amount of waste is much less than it used to be and the cost of
  that waste is much less. For all practical purposes, almost nobody does
  should no longer be concerned about slack, and it should no longer be
  has examined when planning your partition structure.

  What Partitions are used for today

  There are a variety of different ways people put in place several
  scores of these days. Some of these uses are reasonable, some are
  debatable, some are downright bad. I'll discuss a number of Commons
  partition types in the following:

  1. a partition for Windows only

  Most of the people who create such a partition are because they believe
  If they never have to reinstall Windows properly, at least they
  He won t lose their data and he won t have to reinstall their applications.
  because both are safe on other partitions.

  The first of these thoughts is a false comfort and the second
  is downright bad. See the analysis of the types of partition 2 and 4
  below to find out why.

  Also note that over the years, a lot of people who find their windows
  partition that has begun to be the right size proves to be too
  small. For example, if you have such a partition for Windows and later
  upgrade to a newer version of Windows, you may find that your Windows
  partition is too small.

  2. a partition for installed programs

  This normally goes hand in hand with the partition type 1, a partition for
  just Windows. The thought that if you reinstall Windows, your
  installed application programs are safe if they are in another
  partitions is simply not true. That s because all programs installed
  (with the exception of an occasional trivial) have pointers to the inside
  Windows, in the registry and elsewhere, as well as associated files
  buried in the Windows folder. So if Windows, pointers and
  the files go with it. Given that the programs need to be reinstalled if Windows
  the fact, this reasoning to a separate partition for programs not
  work. In fact, there is almost never a good reason to separate
  Windows of the software application into separate partitions.

  3. a partition for the pagefile.

  Some people think mistakenly that the pagefile on another
  score will improve performance. It is also false; It doesn t
  help and often I hurt, performance, because it increases the movement of the head
  to get back to the page to another file frequently used
  data on the disk. For best performance, the paging file should normally
  be on the most widely used score of less used physical player. For
  almost everyone with a single physical disk than the same drive s
  Windows is on C:.

  4. a partition for backup for other partitions.

  Some people make a separate partition to store backups of their other
  or partitions. People who rely on a "backup" are a joke
  themselves. It is only very slightly better than no backup at all.
  because it leaves you likely to be simultaneously the original losses
  and backup for many of the most common dangers: the head crashes and other
  types of drive, serious glitches to power failure, near lightning
  strikes, virus attack, even stolen computer.  In my opinion,.
  secure backup must be on a media removable and not stored in the
  computer.

  5. a partition for data files

  Above, when I discussed separate Windows on a clean partition,
  I pointed out that separate data from Windows is a false comfort if
  He of done with the idea that data will be safe if Windows ever
  must be reinstalled. I call it a false comfort that's because
  I'm afraid many people will rely on this separation, think that their
  data are safe there and so do not take measures to
  Back it up. In truth the data is not safe there. Having to reinstall
  Windows is just one of the dangers to someone a s hard disk and not
  probably even one. This kind of "backup" falls into the same
  category, as a backup to other partitions partition; It lets you
  sensitive to the simultaneous loss of the original and the backup on many of
  the most common dangers that affect the entire physical disk, not
  just the particular partition. Security comes from a solid backup
  diet, not how partition you.

  However, for some people, it may be a good idea to separate Windows and
  programs on the one hand of the data on the other, putting each of the
  two types into separate partitions. I think that most people
  partitioning scheme must be based on their backup system and backup
  plans are generally of two types: whole hard disk imaging
  or data only backup. If you back up data, backup is
  usually facilitated by the presence of a separate with data only partition;
  to save just the score easily, without having to
  collect pieces from here and elsewhere. However, for
  those who backup by creating an image of the entire disk, there is
  usually little, if any, benefit the separation of data in a partition of
  its own.

  Furthermore, in all honesty, I must point out that there are many
  very respected people who recommend a separate partition for Windows,
  Whatever your backup plan.  Their arguments haven t convinced
  me, but there are clearly two views different here.

  6. a partition to image files

  Some people like to deal with the images and videos as something separate
  other data files and create a separate partition for them. To my
  the spirit, an image is simply another type of data and there is no
  the advantage in doing so.

  7. a partition for music files.

  The comments above related to the image files also apply to music
  files. They are just another type of data and must be dealt with the
  just like the other data.

  8. a partition for a second operating system to dual-boot to.

  For those who manage several operating systems (Windows Vista, Windows
  XP, Windows 98, Linux, etc.), a separate partition for each operating
  system is essential. The problems here are beyond the scope of this
  discussion, but simply to note that I have no objection to s
  all these partitions

  Performance

  Some people have several partitions because they believe that it
  somehow improves performance. That s not correct. The effect is
  probably low on modern computers with modern hard disks, but if
  whatever it is, the opposite is true: more music mean poorer
  performance. That's because normally no partition is full and it
  so are gaps between them. It takes time for the drive s
  read/write heads to cross these gaps. Close all files
  are, faster access to them will be.

  Organization

  I think a lot of people overpartition because they use scores as a
  organizational structure. They have a keen sense of order and you want to
  to separate the apples from the oranges on their readers.

  Yes, separating the different types of files on partitions is a
  technical organization, but then is to separate different types of
  files in folders. The difference is that the walls are static and
  fixed in size, while the files are dynamic, changing size automatically
  as needed to meet your changing needs. This usually done records
  a much better way to organize, in my opinion.

  Certainly, partitions can be resized when necessary, but except with the latter
  versions of Windows, which requires a third-party software (the and the
  possibility to do so in Windows is primitive compared to the third-party
  solutions). These third party software normally costs money and not
  any point and how stable it is, affects the entire disk.
  with the risk of losing everything. Plan your partitions in
  first place and repartitioning, none will be necessary.  The need
  to repartition usually occurs as a result of overpartitioning in
  the first place.

  What often happens when people organize with partitions instead
  records are that they make a miscalculation of how much room they need on each
  This partition, and then when they run out of space on the partition
  When a file is logically, while having plenty of space
  on the other hand, they simply saving the file in the score of "poor".
  Paradoxically, therefore, results in this kind of score structure
  less organization rather than more.

  So how should I partition my drive

  If you read what came before, my findings will not come as a
  surprise:

  1. If your backup set is the image of the entire disk, have just one
  single (usually c partition :));

  2. If you backups just data, have two partitions one for Windows and
  application programs installed (usually c :)), the other for data
  (normally D :).)

  With the exception of multiple operating systems, it is rarely
  any advantage to have more than two partitions.

• I need a file to an exact width and height and it must be in png format, because it allows to translucency. My graphics are only the top of the page and when I export only the graph is not exported the entire file. How can I get the entire file to ex

  I need a file to an exact width and height and it must be in png format, because it allows to translucency. My graphics are only the top of the page and when I export only the graph is not exported the entire file. How can I get the entire file of export including blank parts?

  in the export dialog box, you have chcked 'use of work plans? ''

• Tecra 8100: Question on the temperature of the processor and speed

  advice please, I installed a p3 900 processor in my tecra 8100 and he sees it only as a 700. Since the Bios was outdated, I downloaded the latest bios which had no effect on its speed. However, as the update of the bios fan never happens that maybe a coincidence?

  Can any body advise me the temp for the processor and the motherboard. My diagnostic software shows 55(c) of the motherboard and 43 for cpu, no fan activity at all. The original processor speed was 600 and I expect the 900 full because I think this is a 100 mhz bus.

  Any help or comment gladly received thanks.

  Hello Peter

  I'm not an expert, but maybe don windows to see the t the correct CPU speed. I recommend you to use a tool (clock THG) which indicates the speed of the processor.

• Where can I find the tutorial or sample Vi to control the position and speed of the stepper motor?

  Hi all

  I use a driver on 3rd for a stepper motor and I use USB6356 as the controller to drive the motor. Could you recommend some VI sample or tutorial on the position and the speed control of stepper motor?

  Thank you

  The best

  I think that what you are looking for is the LabVIEW SoftMotion Module:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/14234

  Here is a good resource on stepper motor theory:

  http://www.haydonkerk.com/resources/StepperMotorTheory/tabid/192/default.aspx

  My recommendation would be to start from a counterexample of LabVIEW. These can be found in LabVIEW > help > examples > material input and output > DAQmx > input meter, output meter.

• How do you determine the type and speed of your RAM installed what?

  * Original title: laptop RAM

  How to determine what type and speed of your RAM installed is.

  Gift little Handy dandy named Speccy.

  http://www.Piriform.com/Speccy

  Once completed its display, click on memory

• try to increase the memory and speed up my computer

  am trying to speed up my computer also need to increase my memory in Manager tasks how can I know which processes I can also safely remove how to disable Hibernate implementation and free up disk space

  Hello
   
  Rather than close the process that could be very important for the proper functioning of your machine, I wish that you follow the below mentioned articles.
   
  5 ways to speed up your PC
  Optimize your computer for peak performance
  Prevention of problems of memory
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Avoid the phone and tablet of export?

  Working with a model which had phone + Tablet pages, I unchecked "Export Page" and also kept the, off the manifest of Muse.

  The pages still download on the web.  Is there a way easy to export, but holding resources here until I'm ready?

  Here's the answer > How can I stop the redirection to mobile?

• How to see the progress and speed of download

  If I compare the android version and mozilla Office, so my 1 question is why there is no progress or status file that we download from the menu of the download page in mozilla android?

  This isn't a feature of Firefox for Android.

• Limiting the tables and using lindex in commands regexp

  Hello

  Here's my second and extremely crap question/post in what concerns the EEM/TCL.  I did some research on Google and have not really been able to find an answer to these questions.  Probably more due to my lack of agility with the search bar of the information being just is not there.  Hope you'll forgive me if.

  1. my first question is this.  Say I want to get an output of a command.  I would like to see all the interfaces in the 'ip vrf command show interface' for example.  Not knowing how many interfaces there may be, there could be 10, or there might be 200, what is the best way to limit a loop function after that I gave the following commands?

  Set _vrf_int [exec show ip vrf interface]
  Set _array_vrf_int [split $_vrf_int '\n']

  set $i 0

  then {$i< 200}="">
  RegExp {([A-Z]+[a-z]+[0-9]+). *} [lindex $_array_vrf_int $i] _complete_string _int
  Inc. $i 1

  }

  Not 100% sure that the syntax is correct, sorry.  If I don't have that 10 interfaces so it won't be necessary to issue this loop 200 times to "$_array_vrf_int".  Also wouldn't be great if I went through the 200 interfaces.  Is there a way I can limit this loop based on the number of lines that were captured after the split function?

  2. the value of the regular expression above is output in the var $_int.  Is there a way I can output the regular expression in a table? a ' :-

  RegExp {([A-Z]+[a-z]+[0-9]+). *} [lindex $_array_vrf_int $i] _complete_string [lindex $ $i _int]

  Syntax is certainly not correct, but I guess there could be a way to do this.  Any thoughts?

  3. I did some comparisons on an outing to see if an access list is present on an interface.  I can get a regexp to pull back the name of the access on a given interface list, but if there are any access-list to an if statement on anything?

  Set _acl_name 0

  RegExp {. * ip access-group (. *) in} $_running_int _complete_string _acl_name

  If {$_acl_name! = 0} {puts ' there is an access-list on $_int "} else {puts ' there is no acl on _int $ :-("} "}

  In the above output I'm defining the value of ' $_acl_name ' to zero so that I can compare it to the fi statement.  This seems to be a newbie to shit how do however.  Is it a kind of generic I put in place of the '0' to match an empty variable. has ' {null}.

  4 I'm sorry last question.  I also reset the variable {null} using a similar wildcard.  Once again I can reset the variable to 0, but it seems just that I do not understand that the syntax well enough and it is without doubt a better method.

  5. I have read several tutorials that cover a lot of bases.  Is there a good reference that anyone can suggest so I don't waste your time with these silly questions?  I'm afraid that the scripts I've studied on this forum are always way above my head.

  Thanks in advance

  Alex

  Assume that the limit of the loop.  Which will never end well.  Instead, use a foreach loop to iterate over the number of lines in the output:

  set vrf_int [exec "show ip vrf interface"]
  foreach line [split $vrf_int "\n"] {
  
        if { [regexp {([A-Za-z0-9]+).*} $line -> int_name] } {
  puts "Interface name is $int_name"
  }
  }
  

  In addition, do not use the variables that start with "_".  Those that are reserved for the Cisco or overall use.  In addition, 'exec' is a single command tclsh.  If you use the EEM Tcl, you will need to interact with the CLI library.  You can watch our best practices guide at https://supportforums.cisco.com/docs/DOC-12757 for some tips and tricks with the use of EEM.

  You can use - all and--inline for regexp all return in a list.  However, given the idea of the loop above, you can also use lappend to each pass:

  set intlst [regexp -all -inline {([A-Za-z0-9]+).*} $output]

  
  set vrf_int [exec "show ip vrf interface"]
  set intlst [list]
  foreach line [split $vrf_int "\n"] {
  
        if { [regexp {([A-Za-z0-9]+).*} $line -> int_name] } {
  lappend intlst $int_name
  }
  }
  
  
  
  You can use "info exist" or simply to check the result of your regexp command to see if a match took place.  See the example above the latter.
  regexp {.*ip access-group (.*) in} $_running_int _complete_string _acl_name
  if {[info exists $_acl_name]} {puts "there is a access-list on $_int"} else {puts "there's no acl on $_int :-("}
  
  You can 'reset' a variable by using the command 'deactivated '.
  One of the best general Tcl references is the "book of the pen:
  
  http://www.Amazon.com/practical-programming-Tcl-4th-Edition/DP/0130385603/ref=sr_1_2?ie=UTF8&QID=1333817448&SR=8-2
  		   

• What is the amount of maxamum and speed of ram for acer aspire 5733z?

  I can't seem to find anywhere it teels than me the maximum and speed of ram of the machine (5733z) can manage. I want to perchase and upgrade of physical ram me. You know 5 minutes

  Nice day

  Until 8Gig DDR3 1333 Mhz with ram 2 chips

  Kind regards

  FReeZA

• Periodic reviews with the impact in the flow accounts and balance

  Hello
  
  We want to get reviewed in HFM regularly (zero adjustments to the periodical view). This will allow a review last 1 month to influence for all the months in terms of CDA.
  
  The question that arises is as follows:
  -There are a few magazines who have one leg of the flow and the other leg in the accounts of type balance.
  
  - So a good figure for one YEAR for the DEBIT account, but the account balance is not the impact as well as balance SHEET accounts don't wear en the frm of adjustments of the previous months as FLOW accounts in the following months, we
  -This causes an imbalance in the balance of this measure.
  
  
  PPL know about this problem and how they can be sorted.
  
  To address this, we have made all adjustments CDA and poster of subscription sheets. But it creates a lot of reviews that will be displayed and is not an optimal solution.

  Yes that's correct.

  Varun

• HP 15 t touch M8U72AV_1: M8U72AV what type and speed memory took this Lalonde

  What a memory this hp laptop does take? What is the type and speed. As ddr3 or ddr3l. M8U72AV

  Here is the Service Manual:

  Manual

  Two not customer-accessible/upgradable memory slots (Intel Core processors) module DDR3L-1600 channel double support

  Page 42. There are some models where you need to remove the motherboard. On your own, you can remove the entire bottom panel and memory is exposed without removing the motherboard. If you mess with her compromise you security, but HP will honor the warranty if you do without damaging anything.

  He will accept a second module of the SO-DIMM DDR3L-1600 4 GB, for a total of 8 GB, which would improve performance a bit. This is the HP no. part.

  4 GB 691740-005

  It's good memory:

  http://www.Amazon.com/HP-691740-001-1600MHz-PC3L-12800-memory/DP/B00CI08FX4/ref=sr_1_1?ie=UTF8&QID=1438515158&SR=8-1&keywords=691740-005

  Good luck.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.