line and force does not not in EXE
Good evening
I'm using LabVIEW 8.21 and build an executable from my screws. In doing so, I seem to get intermittent service in the range and Coerce, as behavior noted below:
I'm trying to look at a chart and keep the items in the ranges of INCLUDED entry and get rid of all the others. To this end, I have the double black dots on the stove and the Coercefunction, but it is functioning as inclusive on the limit inferior, but exclusive on the upper limit. I copied the code on a separate VI block, and it works well here, but not in my original. As you can see, the upper front wall is not to let the value of the upper limit "0.269", where the background is it. Please note the same code on the block diagrams. These screws are embedded in an executable, in the same specifications of construction, but with different behaviors. The non-working code is a subvi dynamically called VI, but it is included in the specification.
Copy of the labour code in VI-labour code to replace does not result in operation.
What is happening here, or that I'm missing?
Thank you
Tim
How numbers are generated? Are make sure that it is exactement.269 or the value actually dating more than decimals are rounded to one You have the same problem with other values for the Max and Min.
I wonder if the problem is due to the inherent inaccuracy of a computer trying to represent certain numbers. Essentially error due to try to make accurate comparisons on the doubles.
Tags: NI Software
Similar Questions
-
Why e-lines and a-lines are different to step 45SQL> SELECT * FROM table(dbms_xplan.display_cursor(NULL,NULL,'ALLSTATS LAST')) 2 / PLAN_TABLE_OUTPUT ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ SQL_ID dha2ganf65y1j, child number 0 ------------------------------------- SELECT /*+ GATHER_PLAN_STATISTICS */ OTT.NAME ORDER_TYPE, MSI.ATTRIBUTE8 ITEM_ID, MSI.DESCRIPTION ITEM_NAME, BU.BU_ID BUNIT_ID, BU.B_NAME BUNIT_NAME, CASE WHEN XSE.TRANS_TYPE IN ('INV', 'INVQT') THEN SUM(NVL(XSE.QTY, 0)) END SALE_UNIT, CASE WHEN XSE.TRANS_TYPE IN ('INV') THEN SUM(NVL(XSE.QTY * XSE.UNIT_PRICE, 0)) END SALE_VAL1, CASE WHEN XSE.TRANS_TYPE IN ('INVQT') THEN SUM(NVL(XSE.QTY * XSE.UNIT_PRICE, 0)) END SALE_VAL2, CASE WHEN XSE.TRANS_TYPE = 'INVRET' THEN SUM(NVL(XSE.QTY, 0)) END RET_UNIT, Plan hash value: 3763908585 PLAN_TABLE_OUTPUT ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ --------------------------------------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem | --------------------------------------------------------------------------------------------------------------------------------------------------------------------- | 1 | HASH GROUP BY | | 1 | 1 | 436 |00:00:08.61 | 239K| | | | |* 2 | FILTER | | 1 | | 9071 |00:00:07.28 | 239K| | | | | 3 | TABLE ACCESS BY INDEX ROWID | OE_TRANSACTION_TYPES_TL | 1 | 1 | 9071 |00:00:07.13 | 238K| | | | | 4 | NESTED LOOPS | | 1 | 1 | 18143 |00:00:02.54 | 238K| | | | | 5 | NESTED LOOPS | | 1 | 1 | 9071 |00:00:06.57 | 238K| | | | | 6 | NESTED LOOPS | | 1 | 1 | 9071 |00:00:05.82 | 211K| | | | | 7 | NESTED LOOPS | | 1 | 1 | 630 |00:00:00.89 | 35991 | | | | | 8 | NESTED LOOPS | | 1 | 1 | 1500 |00:00:00.67 | 31491 | | | | | 9 | NESTED LOOPS | | 1 | 1 | 630 |00:00:00.28 | 13221 | | | | | 10 | NESTED LOOPS | | 1 | 1 | 774 |00:00:00.31 | 10125 | | | | | 11 | NESTED LOOPS | | 1 | 1 | 774 |00:00:00.29 | 9351 | | | | | 12 | NESTED LOOPS | | 1 | 1 | 774 |00:00:00.26 | 7803 | | | | | 13 | NESTED LOOPS | | 1 | 1 | 774 |00:00:00.22 | 5481 | | | | | 14 | NESTED LOOPS | | 1 | 1 | 774 |00:00:00.14 | 3159 | | | | | 15 | NESTED LOOPS | | 1 | 1 | 774 |00:00:00.07 | 1609 | | | | |* 16 | HASH JOIN | | 1 | 1 | 774 |00:00:00.01 | 59 | 935K| 935K| 772K (0)| | 17 | TABLE ACCESS BY INDEX ROWID | FND_FLEX_VALUES | 1 | 23 | 10 |00:00:00.01 | 9 | | | | |* 18 | INDEX RANGE SCAN | FND_FLEX_VALUES_N3 | 1 | 23 | 10 |00:00:00.01 | 2 | | | |* 19 | HASH JOIN | | 1 | 1340 | 3288 |00:00:00.03 | 50 | 855K| 855K| 1157K (0)| |* 20 | TABLE ACCESS FULL | MTL_CATEGORIES_B | 1 | 68 | 69 |00:00:00.01 | 15 | | | | | 21 | NESTED LOOPS | | 1 | 3634 | 4534 |00:00:00.05 | 35 | | | | | 22 | TABLE ACCESS BY INDEX ROWID| XXCS_DEPOT_SDS | 1 | 1 | 1 |00:00:00.01 | 2 | | | | |* 23 | INDEX RANGE SCAN | XX_DPT_SDS_ORGID | 1 | 1 | 1 |00:00:00.01 | 1 | | | | |* 24 | INDEX RANGE SCAN | MTL_ITEM_CATEGORIES_U1 | 1 | 3634 | 4534 |00:00:00.02 | 33 | | | | | 25 | TABLE ACCESS BY INDEX ROWID | FND_FLEX_VALUES | 774 | 1 | 774 |00:00:00.05 | 1550 | | | | |* 26 | INDEX RANGE SCAN | FND_FLEX_VALUES_N4 | 774 | 1 | 774 |00:00:00.01 | 776 | | | | | 27 | TABLE ACCESS BY INDEX ROWID | FND_FLEX_VALUES | 774 | 1 | 774 |00:00:00.05 | 1550 | | | | |* 28 | INDEX RANGE SCAN | FND_FLEX_VALUES_N4 | 774 | 1 | 774 |00:00:00.01 | 776 | | | | |* 29 | TABLE ACCESS BY INDEX ROWID | FND_FLEX_VALUES_TL | 774 | 1 | 774 |00:00:00.03 | 2322 | | | | |* 30 | INDEX UNIQUE SCAN | FND_FLEX_VALUES_TL_U1 | 774 | 1 | 774 |00:00:00.01 | 1548 | | | | | 31 | TABLE ACCESS BY INDEX ROWID | FND_FLEX_VALUES_TL | 774 | 1 | 774 |00:00:00.03 | 2322 | | | | |* 32 | INDEX UNIQUE SCAN | FND_FLEX_VALUES_TL_U1 | 774 | 1 | 774 |00:00:00.01 | 1548 | | | | |* 33 | INDEX UNIQUE SCAN | FND_FLEX_VALUES_TL_U1 | 774 | 1 | 774 |00:00:00.01 | 1548 | | | | |* 34 | INDEX UNIQUE SCAN | MTL_CATEGORIES_TL_U1 | 774 | 1 | 774 |00:00:00.01 | 774 | | | | |* 35 | TABLE ACCESS BY INDEX ROWID | MTL_SYSTEM_ITEMS_B | 774 | 1 | 630 |00:00:00.04 | 3096 | | | | |* 36 | INDEX UNIQUE SCAN | MTL_SYSTEM_ITEMS_B_U1 | 774 | 1 | 774 |00:00:00.01 | 1548 | | | | | 37 | INLIST ITERATOR | | 630 | | 1500 |00:00:00.29 | 18270 | | | | |* 38 | INDEX RANGE SCAN | QP_PRICING_ATTRIBUTES_N5 | 2520 | 2 | 1500 |00:00:00.30 | 18270 | | | | |* 39 | TABLE ACCESS BY INDEX ROWID | QP_LIST_LINES | 1500 | 1 | 630 |00:00:00.06 | 4500 | | | | |* 40 | INDEX UNIQUE SCAN | QP_LIST_LINES_PK | 1500 | 1 | 1500 |00:00:00.03 | 3000 | | | ||* 41 | TABLE ACCESS BY INDEX ROWID | XXCS_SAP_EXTRACTS_ALL | 630 | 1 | 9071 |00:00:09.35 | 175K| | | | |* 42 | INDEX RANGE SCAN | XXCS_SAP_EXT_ALL_ORG_PROCESSDT | 630 | 1868 | 5794K|00:00:23.38 | 29612 | | | | | 43 | TABLE ACCESS BY INDEX ROWID | OE_ORDER_HEADERS_ALL | 9071 | 1 | 9071 |00:00:00.58 | 27286 | | | | |* 44 | INDEX RANGE SCAN | IDX$$_89BD0004 | 9071 | 1 | 9071 |00:00:00.18 | 18215 | | | | |* 45 | INDEX RANGE SCAN | OE_TRANSACTION_TYPES_TL_N1 | 9071 | 1 | 9071 |00:00:00.13 | 2 | | | | |* 46 | TABLE ACCESS BY INDEX ROWID | QP_PRICING_ATTRIBUTES | 188 | 1 | 188 |00:00:00.01 | 378 | | | | |* 47 | INDEX RANGE SCAN | QP_PRICING_ATTRIBUTES_N12 | 188 | 1 | 188 |00:00:00.01 | 190 | | | | |* 48 | TABLE ACCESS BY INDEX ROWID | QP_PRICING_ATTRIBUTES | 188 | 1 | 0 |00:00:00.01 | 376 | | | | |* 49 | INDEX RANGE SCAN | QP_PRICING_ATTRIBUTES_N4 | 188 | 1 | 0 |00:00:00.01 | 376 | | | | |* 50 | TABLE ACCESS BY INDEX ROWID | QP_PRICING_ATTRIBUTES | 0 | 1 | 0 |00:00:00.01 | 0 | | | | |* 51 | INDEX RANGE SCAN | QP_PRICING_ATTRIBUTES_N4 | 0 | 1 | 0 |00:00:00.01 | 0 | | | | Predicate Information (identified by operation id): --------------------------------------------------- 2 - filter((("QPPR".ROWID= AND IS NULL) OR "QPPR".ROWID=)) 16 - access"B"."SEGMENT1"="B"."FLEX_VALUE") 18 - access("B"."FLEX_VALUE_SET_ID"=1012988 AND "B"."ENABLED_FLAG"='Y') 19 - access "IC"."CATEGORY_ID"="B"."CATEGORY_ID") 20 - filter("B"."SEGMENT3" IS NOT NULL) 23 - access "XDS"."ORG_ID"=182) 24 - access "IC"."ORGANIZATION_ID"="XDS"."ORGANIZATION_ID") 26 - access("B"."SEGMENT2"="B"."FLEX_VALUE" AND "B"."FLEX_VALUE_SET_ID"=1012989) 28 - access("B"."SEGMENT3"="B"."FLEX_VALUE" AND "B"."FLEX_VALUE_SET_ID"=1012990) 29 - filter("T"."DESCRIPTION" IS NOT NULL) 30 - access("B"."FLEX_VALUE_ID"="T"."FLEX_VALUE_ID" AND "T"."LANGUAGE"=USERENV('LANG')) 32 - access("B"."FLEX_VALUE_ID"="T"."FLEX_VALUE_ID" AND "T"."LANGUAGE"=USERENV('LANG')) 33 - access("B"."FLEX_VALUE_ID"="T"."FLEX_VALUE_ID" AND "T"."LANGUAGE"=USERENV('LANG')) 34 - access("B"."CATEGORY_ID"="T"."CATEGORY_ID" AND "T"."LANGUAGE"=USERENV('LANG')) 35 - filter("MSI"."INVENTORY_ITEM_STATUS_CODE"='Active') 36 - access("IC"."INVENTORY_ITEM_ID"="MSI"."INVENTORY_ITEM_ID" AND "MSI"."ORGANIZATION_ID"="XDS"."ORGANIZATION_ID") 38 - access("QPPR"."PRICING_PHASE_ID"=1 AND (("QPPR"."QUALIFICATION_IND"=4 OR "QPPR"."QUALIFICATION_IND"=6 OR "QPPR"."QUALIFICATION_IND"=20 OR "QPPR"."QUALIFICATION_IND"=22))) filter("MSI"."INVENTORY_ITEM_ID"=TO_NUMBER(DECODE(UPPER("QPPR"."PRODUCT_ATTR_VALUE"),'ALL',NULL,"QPPR"."PRODUCT_ATTR_VALUE"))) 39 - filter(("QPLL"."END_DATE_ACTIVE" IS NULL AND "QPLL"."LIST_HEADER_ID"=6008 AND "QPLL"."PRICING_PHASE_ID"=1 AND INTERNAL_FUNCTION("QPLL"."LIST_LINE_TYPE_CODE") AND INTERNAL_FUNCTION("QPLL"."QUALIFICATION_IND"))) 40 - access("QPPR"."LIST_LINE_ID"="QPLL"."LIST_LINE_ID") 41 - filter(("XSE"."SEGMENT1" IS NOT NULL AND INTERNAL_FUNCTION("XSE"."TRANS_TYPE") AND "MSI"."SEGMENT1"="XSE"."SEGMENT1")) 42 - access("XSE"."ORG_ID"=182 AND "XSE"."PROCESS_DATE">=TO_DATE('2011-12-01 00:00:00', 'yyyy-mm-dd hh24:mi:ss') AND "XSE"."PROCESS_DATE"<=TO_DATE('2011-12-09 00:00:00', 'yyyy-mm-dd hh24:mi:ss')) 44 - access("OH"."ORG_ID"=182 AND "OH"."ORDER_NUMBER"=TO_NUMBER("XSE"."DIST_INV_NO")) 45 - access("OH"."ORDER_TYPE_ID"="OTT"."TRANSACTION_TYPE_ID") 46 - filter("PRICING_ATTRIBUTE_CONTEXT" IS NULL) 47 - access("LIST_LINE_ID"=:B1 AND "PRICING_ATTRIBUTE" IS NULL) 48 - filter("LIST_LINE_ID"=:B1) 49 - access("PRICING_ATTRIBUTE_CONTEXT"='PRICING ATTRIBUTE' AND "PRICING_ATTRIBUTE"='PRICING_ATTRIBUTE11') 50 - filter("LIST_LINE_ID"=:B1) 51 - access("PRICING_ATTRIBUTE_CONTEXT"='PRICING ATTRIBUTE' AND "PRICING_ATTRIBUTE"='PRICING_ATTRIBUTE11') 105 rows selected.
Even I collected stats before executing the plan--------------------------------------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem |--------------------------------------------------------------------------------------------------------------------------------------------------------------------- | INDEX RANGE SCAN | OE_TRANSACTION_TYPES_TL_N1 | 9071 | 1 | 9071
SQL> exec dbms_stats.gather_table_stats('ONT','OE_TRANSACTION_TYPES_TL',method_opt=>'for all columns ',cascade=>true) PL/SQL procedure successfully completed.Maybe wrong was a bad choice of words.
Is there really a problem with the execution of this query?
It takes 8 seconds, is this a problem?If you want to get more accurate estimates, then maybe you should focus on lines 16 to 24 and view inline PRI and Associates joins.
-
pages started freezing, force to quit and restart does not work
Try to do the homework, no good with computers. I used screen split pages with safari, then I'll click to pages and the cursor does not blink, and I can ty click on something, but nothing helped. I even try to click in Safari and who does not work either. I have to then press the task or what you call it, force quit applications, then restart. It started just randomly and really annoying, see I need to deal with all my classes AP. Pages for this when alone as well.
Hello ElliottRadovan,
I understand that the Pages and Safari sometimes appear to hang when switching between the two. Fortunately we have some articles that detail how to identify and correct the source of the problem, restore stability to your Mac.
Isolate problems on Mac OS X
https://support.Apple.com/en-us/HT203161Mac OS X: how to solve a software problem
https://support.Apple.com/en-us/HT201516See you soon!
-
When connect my external hard drive and opening not wanting my my files, I get this message "shortened lcwipx.exe you make reference to is not available"and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?
Hi Pascal,.
I see that you get an error trying to access files on an external drive. I'll help you with this problem.
1. What is the brand and model of the computer?
2. What is the brand and model of the external drive?
3. what security software is installed on the computer?
4. have you made changes on the computer recently?
5A external drive earlier good work?
6. have you updated to Service Pack 2 installed?
Method 1.
Connect a different drive to the computer and check.
Method 2.
Plug this external drive on another computer and check the status.
Method 3.
Start the computer in safe mode and check.
Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode
Method 4.
Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages - Windows cannot find C:\Windows\system32\rstui.exe «»
- Recent changes made to your computer: I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?
- What you have already tried to fix a volume control simple back - I tried things like this before as to cause major problems. I'll do it right the first time.
Read this tutorial carefully. Hpoefully it resolve issue you. I have no knowledge on this topic. Only offer you a tutorial of a VERY worthy site.
How to add, change, or remove a drive letter in Vistahttp://www.Vistax64.com/tutorials/114767-drive-letter-add-change-remove.html
t-4-2
PS Sorry for the huge impression. A small bug in copy/paste.
-
I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Video plays in the source window, but does not to drag me and thenedit on the time line with the. MXF files. audio will slide to the time line, but not the video. Interestingly, not later than end of December 2015 it allowed me to change with .mxf files, but no, it won't. Any help out there?
Neil, get it fixed, I do not have the video channels set correctly on the left
side of the line of the time. Learn the new adobe; Thank you
Monday, February 15, 2016 13:20, R Neil Haugen [email protected]>
-
now, I'm using windows 7 Home Basic but in my google chrome and firefox does not please give me suggestion?
Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
-
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
-
Moderator Forum Keith has a few suggestions along this line to
-
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
-
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.
-
Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
`
When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.
-
I hope this helps. Good luck.
-
The date and time does not work.
I have an iphone 5 c.
The date and time does not work. This is the second time. The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.
Even after trying to change it manually, time slows down or stops.
Everyone has problems with their date and time?
- Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
- Restore factory settings (no backup)
- Make an appointment at your local Apple store to have it checked.
-
My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?
They are only updated office or all updates?
For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx
then manually download and install the same.
If all updates, perhaps consider the following general tips-
Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.
Method 1: Save the Windows Update files
1. Click Start and type notepad in the box start the search.
2. click on Notepad in the list programs.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S
4. in Notepad, on the file menu, click Save as.
5. in the file type list, click all files.
6. in the file name box, type register.bat.
7. save the Register.bat file to your desktop.
8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
9. try to reinstall updates.http://support.Microsoft.com/kb/958053
See: method 1: save the Windows Update fileshttp://support.Microsoft.com/kb/326253
Method 5: Registry Windows Update engine fileshttp://support.Microsoft.com/kb/971058
How to reset the Windows Update components?Method 2: Download and install Windows Update agent
Windows Update Agent
How to get the latest version of the Windows Update Agent to help manage updates on a computer
http://support.Microsoft.com/kb/949104Information for network administrators about how to obtain the latest Windows Update Agent
http://support.Microsoft.com/kb/946928Click Start, click run, click Browse, navigate to the file you saved and click Open.
Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce
Click run.
Follow the steps to complete the wizard.
Important
To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.
Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.
Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.
D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)
TaurArian [MVP] 2005-2010 - Update Services
-
Windows XP does not have exe files
My computer has been infected by a virus that exceeded AVG 9.
I removed the virus using Malwarebytes but after deleting Windows does not recognize exe files more.
I tried to restore to a point before the infection, but I had recently cleaned up but a restore point and virus was present after the restoration.
I also checked the registry and checked all the entries associated with the exe files and found no errors... Suggestions that don't involve wiping the entire hard drive? I really want to do it AGAIN... It would be the second time in a year.This is a popular remedy for this condition:
Go to this site WWW by Doug Knox:
On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.
Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.
-
WinXP
user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is adminI did a gpupdate/force and restart twice PC
Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all usersHi elena_ad,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:
http://social.technet.Microsoft.com/forums/en/winserverManagement/threads
-
Computer is very slow and IE does not work all the time.
I bought a computer from my old employeer. He is doing all sorts of things, or should I say not to do all sorts of things. It is very slow and IE does not work all the time. They have questions arise and ask if the administrator oks things and other things like that. It came with any disks. I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it. Can someone please?
Hello
Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
the former employer to do it for you if necessary.Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
role in this issue. And even the TCP/IP stack might need to be refreshed.What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
--------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
--------------------------------
Maybe need of these:
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
"Problem reports and Solutions" does not
After scoring in my Windows Vista machine, I am bombarded with notifications "Problem reports and solution" does not. I tried to disable the service, but I still get notifications. I can't find PRS in the control panel. In the event viewer, I found the following:
Error
Log name: Application
Source: Application error
Event ID: 1000WerCon.exe application, version 6.0.6002.18005, time stamp 0x49e026db, module wercplsupport.dll, version 6.0.6000.16386, time stamp 0x4549d345, exception code 0xc000001d, offset error 0x000000000000ce84, 0xda0, failing application start 0x01cd140e4c7b7770 process id failed.
I can't confirm or deny that usrename of the local administrator account has been changed. It is quite possible. I know that usernames on the pc have been changed to instead of creating new user accounts. I just can't confirm if one of these accounts was a local administrator.
Any help would be greatly appreciated. It is a major pain in the back.
SG
Hello
- Your computer is connected to a domain?
2. don't you make changes to the computer until the problem occurred?
I suggest you to see link below and check if it helps.
Windows Error Reporting and reports on problems and Solutions feature in Windows Vista: http://technet.microsoft.com/en-us/library/cc709644(v=ws.10).aspx
Hope this information is useful.
-
adater WLAN and bluetooth does not properly on windows7 32 bit hp 250
I need driver wireless adater aid, after installing windows7 32 bit on my new laptop HP 250 G1 my wireless network does not yet and infact is not visible in the Device Manager and theblutoothalso does not work correctly. is the network controller hardware id: PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
Finally, my BIOS, wlan id is: ppd-qcwb335 on hold using the driver get my wlan and bluetooth back to life!
Thank you!
Series of QCA9000 of Qualcomm, Atheros Wireless LAN Driver for Microsoft Windows:
http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64676.exe
To help you with your bluetooth driver, I need your bluetooth hardware ID.
-
Create a user profile for children on PC 32-bit W7 with MS Family Safety.
Recently they have complained he "runs slow and internet does not work.
After playing for a little, I realized a ton of processes were running in the background. I couldn't run msconfig to their profile (not administrator) and after some research, I even if the profile has been corrupted.
I created a new profile, but now the same thing is happening a few days later.
See below; multiple copies of the same process are running. This happens within 2 m after the log-in and I only started one program.
I started in safe mode with network and ran Windows defender, Spybot S & D and my virus scanner (all full scans) and turned up nothing malicious. A few cookies tracking in the web cache, but nothing out of the ordinary. I searched for the files wlaacmgr.exe and dplaysvr.exe (b/c they do not appear running in my admin profile) but they were found only in windows OS directories. I understand that they are files of W7 but some maleware recreates.
Many of them are the same files taking up process on the old profile that I deleted.
Any help or suggestion as to why I have multiple copies of large processes running on the machine? As I wrote it, I sign in, seems to be fine for one but 2 minutes a lot of process appear repeatedly and slows down the computer to a crawl.
These two files listed are not at all on my admin profile and the machine works fine in my admin profile. Even with open Photoshop, the CPU is only about 50% under my profile.
Try to check/change the entries in startup with Autoruns from Sysinternals, which should work on the limited account to see its startup items.
Maybe you are looking for
-
O.P. Hello. Try to establish if the optical SATA connection on an iMac in early 2009 will achieve 2 SATA speed of 3 GB with a 500 GB SSD crucial MX200. Have already tried a Sandisk ultra 2 with controller Marvell and only got a negotiated speed of SA
-
HP - Photosmart printer 5520: photosmart 5520 -.
When the page prints all colors are OK except that 'Black' does not print. Cartridges are new.
-
HP Mini 110 3135: allows to speed up the recovery of my computer?
My HP MINI 110 3135 became very slow and frustrating to use. Do a recovery to solve this problem? The instructions of recovery still refer to windows 7, but my mini windows 7 starter OS edition, the same instructions apply? Thank you.
-
I can not get administrator access and yet I am shown as the administator
I can't use my Finali Songwriter software because I can't allow it. IAM need to click with the right button on the shortcut for the software I have on my desktop and click on "Administrator" in the pop window but it is not shown in administrator. M
-
I can't get updates for my home vista premium service that I Pack. I get an error 80070424. I can also download quick time and yet I was able to download real player. have not yet had this for a year. Sign me up frustrated