Line block quote can not understand after issuance of quote

Similar Questions

• Can not understand how to network my laptop windows 8 with my PC running XP Tower.

  I have worked on it for hours and just can not understand. I have two computers connected wirelessly to the internet via a telephone line modem.  have changed both computers to have as the workgroup name. I ran assistants set up and got to the point where computers see eachother, but does not share anything between them. My main goal is to be able to print wireless from my Windows laptop, 8 to the PC that is connected to the printer. I followed all the steps in this link http://windows.microsoft.com/en-us/windows/networking-home-computers-running-different-windows#networking-home-computers-running-different-windows=windows-vistabut nothing works. Any ideas?

  PC connections from one to the other, is usually held with a CAT5

  cable... It looks like an ethernet cable, but is not. If both in the same database.

  In addition, microsoft has a utility called 'print migrator' downloading to xp, open,.

  create a shortcut, move the shortcut to windows pc 8...

• can not understand how to reset lost password master key

  I read how to change but can not understand to do

  Have you tried using the URL in the address bar chrome?

  chrome://pippki/content/resetpassword.xul
  

  If you use the chrome that url does not work, then delete the files key3db and signons.sqlite in the Firefox profile folder.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • 'Reset the master password': http://kb.mozillazine.org/Master_password
  • https://support.Mozilla.org/KB/forgot+my+master+password

• I disabled toolbars. Now I can not understand how to get back them. Have no 'view' click.

  I went to view/toolbars and disabled my toolbars. Now I can not understand how to get back them. Have no 'view' to click on.

  In Firefox 3.6 and later Windows, you can hide the menu bar on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press F10 or press and hold the Alt key to bring up the menu bar temporarily.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select to show or hide toolbars (click on an entry to switch from the State).

  See also what happened to the file, edit and view menus? and http://kb.mozillazine.org/Toolbar_customization

• The screen of my computer no longer turns. It is supposed to run it any way, I flip the screen, I can not understand how to solve this problem

  The screen of my computer no longer turns. It is supposed to run it any way, I flip the screen, I can not understand how to solve this problem. I guess a child (best case scenario) or my husband (worst case) have been involved in this. But it drives me crazy. Any ideas on how to get that back in action?

  Hello

  What is the brand and model of the computer?

  Were there recent changes made on the computer before the show?

  This issue could be due to corrupted graphics cards drivers. I suggest you to update the latest version of the drivers of graphics from the manufacturer's Web site and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  Thank you.

• downloaded the trial version Microsoft Windows Small Business Server (SBS) 2011 Essentials to my laptop (Windows 7, IE 9) but now I can not understand how to open it

  (1) downloaded the evaluation version Microsoft Windows Small Business Server (SBS) 2011 Essentials to my laptop (Windows 7, IE 9) but now I can not understand how to open it

  (2) in addition, I want to assure you that I understand how the server works.  Is it just software?  No box to connect the computers up to?

  Hello

  The question you have posted is related to Small Business Server 2011. Please post your question in the Forums of Windows Small Business Server. Consult the following link:
  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver2011essentials/threads

  Hope this helps

• I get errors MxTray.exe and can not understand why. This error appears randomly.

  I get errors MxTray.exe and can not understand why. This error appears randomly.

  Hello thunder1948m

  Do a search on the internet suggest that the MxTray.exe could be a malicious virus that contains malicious programs.

  If you are not running currently a virus scanner, you can download Microsoft Security Essentials for free. It offers protection in real time and protects against software viruses, spyware and other malicious software.
  You can download here.

  I hope this helps.

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I want to download all versions are necessary, but I can not understand what are the dated versions are currently installed in my PC?

  Re: "drivers and downloads" my computer dell laptop inspiron I6400 / E 1505; Windows vista Home premium, 32 bit OS: I want to download all versions are necessary, but I can not understand what are the dated versions are currently installed in my PC?

  Hello

  I suggest you try the given below steps that would help you to view the details of the driver.

  (a) type devmgmt.msc into the search box start and press enter.

  (b) in the Device Manager, right click on the device you need to display the version.

  (c) select Properties.

  (d) click the driver tab and display the version of the driver in the Driver Details.

  Hope this information is useful.

• BlackBerry BB Z10 Z10 can not load after the 10.3.1 update

  Hello

  I'm having problem with my phone that can not load after that (updated with 10.3.1). battery When I charge the phone, the LED turns red, and then appears the Blackberry logo and finally the Red battery logo appears telling me that the phone has no power. He keeps repeated several times.

  How to start up the phone?

  Please help me. Thank you.

  I suggest you try the method of automatic loader, very clean and very energetic:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

  Beware that it is completely destructive... the device will be 'as new'... None given, no apps, no accounts, etc. Remember you first take a full backup, as well as make full manual documentation of applications, accounts, configurations, etc. Sometimes a restore reintroduced corruption even sought to eliminate, and manual reconfiguration is required.

  You can also use it to return to a BONE earlier if you want... you can install any level of the operating system for which you can find an auto-loader. (Hint... search the site of CB!)

  Good luck and let us know!

• HI I CAN NOT DOWNLOAD AFTER EFFECT

  HI I CAN NOT DOWNLOAD AFTER EFFECT

  You have a 32-bit computer? or 64-bit?

• Why I can not download After Effects?

  Why I can not download After Effects?

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• I out of the CC to my previous laptop and I can not understand how to create the link connection in my new laptop

  I out of the CC to my previous laptop and I can not understand how to create the link connection in my new laptop

  Hi Steven,

  You have the CC of Adobe desktop application installed on your machine?

  In the case is not, please see the help below document to download the same:

  Creative cloud to desktop

  Kind regards

  Sheena

• Can not start after Windows update

  Hello

  My laptop has done a windows update, but crashed to halfway through, now when it starts and after that I entered my password windows 7 it crashes just, finally it loads my desktop but it took 3 hours to fully charge it and my icons but whenever I clicked on an icon It took about 15 minutes to open and froze the laptop at the same time

  I can not load in safe mode and when I finally managed to restore option it says no restore points are available (which is strange, I created one weekend)

  I also tried to boot from the disc of windows 7 and using all the food options available without result

  any help would be appreciated!  : o).

  sruk79,
  I suggest to start with your support of Windows 7 for System Recovery Options and select the command line option.  Then run the System File Checker and see if it is able to correct the problems.  Then after return with results and information that carry PA asked.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to apply an ICC profile to display. can not understand instructions for color management

  I just upgraded again own computer with Windows7 from my old XP machine.  I have icc profiles for my two monitors.  Under XP, I had nothing wrong with 'apply' or 'associate' or 'use' of these profiles by using the MS color, and both monitors would change appearance when starting a State fully calibrated and profiled.

  Now, in Win7, I followed fairly confusing instructions, go to the color management / devices / select one of the screens / click "use my settings for this device" / add a profile box "Profiles associated with this device" using the add"" button.  Then I click on the correct profile in this box and click "Set as default profile".  Nothing happens.  I can put any weird profile as a default, and nothing happens.

  I don't even know instructions during the effective application of this profile is supposed to happen, but guess it is when you click on "set as default profile."

  "It may be a clue that the color management dialog box fails to identify my poster other than in the form ' generic PnP monitor - NVIDIA GeForce 9800 GT" while the control panel NVIDIA and Windows 'Screen Resolution' box both manage to identify the poster correctly and use their own name i, e, Eizo L768 and Samsung SyncMaster.

  In addition, 'Identify display' in the dialogue box CM works exactly the opposite of how it works in the other two boxes that is Samsung (left) is number 1 in color Mgmt, but number 2 in the control panel Nvidia and Windows 'Screen Resolution' box.

  I'm stuck until I can address this issue, so would be very grateful for any help.

  Thank you

  Thanks the geek for your help.  No thank you somehow to anyone from Microsoft.  None of this reflects well on Microsoft; No to the current Windows 7 CM interface design, not the fact that after years of complaints and messing around with color management that they could have finally gotten the mechanics in place, but still cannot explain, or make it possible for mortals to use it, and certainly not the fact that they create these monsters and offer no support to any well-founded None.  Not a response to a MS person here, not a good answer to similar questions scattered throughout the Web, no after sales support during any period after the purchase of a new operating system of MS qualified (it's supposed to be provided by the OEM, but of course, none of them knows this kind of thing, how can you keep waiting if Microsoft don't?).  So - NO support.

  I can't believe I fell for the hype and purchased a new Windows System.  I swear to you that this is my LAST purchase of windows.  Microsoft, despite the amazing improvements in Win7, still do not understand.

  Here's the answer to my problem, thanks to some photographers and no thanks to Microsoft...

  1 ASSOCIATE YOUR PROFILES WITH DISPLAY AND SET as a DEFAULT value
  
  To apply an existing ICC profile (ICM file created by any process of calibration), follow these steps.

  Control panel / display / change display settings / advanced settings / color management / color (new!)  / Devices / select one of your displays * 1 / click "use my settings for this device" * 2 / if necessary adds profile applicable to the area of "Profiles associated with this device" using the "Add" button (if your profile is not already listed but is available somewhere on the network or the computer) / click on the correct profile in this box and click "set as default profile."

  * 1 the dialog boxes CM do not label your displays just like the other dialog boxes, they seem to lose the manufacturer and the model number information that is available elsewhere, so your display ABC model nn appears as display: 1. Generic PnP monitor .  Also note that at least on my system, display "1" was in fact display '2' in the other dialogs settings display and vice versa.

  * 2 that could think by selecting 'Use my settings for this device' would mean the Windows using your settings for this device (screen), but apparently it isn't.  That means... Well, I don't know what that means.  Perhaps it means that if you do select not her, even the next step (see below) will not help you.

  Good work so far - unnecessarily complex - and tortuous, but has a certain logic.  Unfortunately it is not nothing at all, until you train the secret key.  Well it seems that the above should do what you want, you need to do something that is quite obvious and not mentioned at all in the General discussion of the help and apparently not known by the 67 people who have read my question.  In fact, it is listed in the section to help Ms... at the bottom of the "Description of the color management settings" and after a largely incomprehensible mass of things that appear not to be relevant, there is a link that is not listed in the content at the top and almost impossible to see... To enable or disable calibration loading Windows

  2 ACTIVATE THE CALIBRATION BY WINDOWS LOADING

  Here's the little hidden from the help file...

  1. To enable or disable calibration loading of Windows, you must be logged in with an account of a user with administrator privileges.

  2. Click to open color management.

  3. Click the Advanced tab, and then click change system default values.

  4. Click on the Advanced tab in the color - default system, dialog management, and do one of the following:

     • To allow Windows to load and display calibrations, check the box use Windows display calibration.

     • To prevent Windows from loading screen calibration, clear use Windows display calibration check box.

  5. Click Close in the color management - default settings dialog box of the system.

  6. Click Close in the color management dialog box.

  Not only it obscure, it confounds even by the fact that you are in the same dialog twice, but the second time is the reference color - default system management instead of the color management as it was the first two times.   But only on the second time is the required box enabled to allow you to check or do a system wide setting.  Easy to miss.

  Experts of either MS doesn't know about it and can not find in the help files or the other, or that they couldn't be bothered to answer my question.  In any case a) I hope this helps someone else, and b) I hope that Mrs. lift their game to support and actually meets the future to frustrated and powerless people that I was.  Thanks Microsoft for losing a day of my life.