Similar Questions

• Lightroom CC blocked during the update of catalogue

  The last OS X iMac with 8 GB.

  I am registered on CC, signed again. update of Lightroom CC.

  After update, I started LR CC, got the boot screen, update has started but got stuck with LR 1% idle...

  What should do?

  Cancel and try to update again.

  Sign out and sign back and try again.

  ~ David

• Commit to taking a lot of time for the update statement to bulk - 11 GR 2

  Hi team,

  We have a source table, which is the main table for our application.

  When I commit a transaction after update block, it takes long about 2 to 4 minutes.

  I don't understand why it takes too long...

  Could you please help me on this fix, please...

  It's the details on the table,

  Total number of records: 35 M record

  Validation interval: 500 records / commit

  Total scores: 3

  total number of columns: 95 - including primary, unique and foreign key columns (all columns will be updated for each update because update from the app online)

  Total no of the foreign key columns: 12

  Unique key column: 1

  Total index: 27 ( including the key index foreign 12 + 1 + 1 index of primary key Unique key index )

  example of update statement,

  UPDATE DIRECTORY_LISTING_STG
  SET
    COLUMN_1 = :VAL_1
    .
    .
    .
    COLUMN_94 = :VAL_94
  WHERE RECORD_KEY = :P_KEY_VAL;
  
  

  The table is.

  Plan hash value: 2997337465
  
  --------------------------------------------------------------------------------------------
  | Id  | Operation          | Name                  | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------------------------
  |   0 | UPDATE STATEMENT   |                       |     1 |   308 |     3   (0)| 00:00:01 |
  |   1 |  UPDATE            | DIRECTORY_LISTING_STG |       |       |            |          |
  |*  2 |   INDEX UNIQUE SCAN| XPKDLS_STG_PARTPN     |     1 |   308 |     2   (0)| 00:00:01 |
  --------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     2 - access("RECORD_KEY"=TO_NUMBER(:P_KEY))
  
  

  Details of the database,

  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
  PL/SQL Release 11.1.0.7.0 - Production
  "CORE 11.1.0.7.0 Production"
  TNS for Linux: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production
  
  

  Thank you

  RAM

  2793617 wrote:

  Hello

  I am updating table via an application using Hibernate jdbc connection online.

  If the update statement will be sent to the database in a pack of 500 documents (batch update).

  Thanks Ram

  line-by-line UPDATE is slow by slow transformation

  In Oracle no other session can 'see' upgrade from uncommitted changes.

  The only way to significantly reduce the elapsed time is to have only 1 UPDATE & 1 COMMIT!

• iPad froze during the update and may not exceed

  Has obtained the new ipad and put in place.  Went do the last software update and it froze during the update process.  Blocked at the white screen with the apple logo.  Can not pass it and past 2 hours.  Tried to restore through itunes, but get the error that I need to enter my password which I can't because I'm stuck on the white screen.

  Hey there smbirchler,

  Congratulations on your new iPad! Looks like you were updating the iOS version, the device froze, and now you can't pass the white Apple logo screen, even after you try to restore in iTunes. I know how happy I am when I get a new camera, so we'll work together on that, so you are able to enjoy your iPad mini.

  We will have you try to use the device in Recovery Mode. Take a look at this article for how to do this:

  If you are unable to update or restore your iPhone, iPad or iPod touch

  Thanks for being a part of the communities of Apple Support!

• Satellite A200-1TD - gel during the update of the BIOS

  I have a laptop model Satellite A200-1TD: PSAE0E, XP operating system

  I tried to update the BIOS and it did not work so he blocked. After that a few minutes, I tried to restart and it didn't worked so I unplugged the AC cable. After that, he did not answer. Black screen, no sign.

  Help, please

  Hello

  I think that, in this case, you can do nothing because the ROM module has to be reflashed and in the worst case the whole mainboard needs to be replaced.

  These freezes during the update of the BIOS can cause such problems as the laptop doesn't start over.

  Moreover, on the Web from Toshiba site you can find an authorized service provider:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an ASP.

  Welcome them

• Windows 7 BSOD after accidental shutdown during the update

  Stop computer accidentally during the update of windows. Now computer stuck in a loop of startup blue screen. Safe mode and windows recovery all lead to the blue screen. I don't have a recovery disk. What should I do?

  Hello

  According to the description of the problem, your computer is stuck in blue screen loop. So, I suggest you to create installation media by following the steps described in the article mentioned below and after that try to run automatic reapir.

  Download Windows 7 Disk Images (ISO files)

  After you create the Bootable USB key, change the boot priority and set it to USB. If you are unsure it is advisable to contact manufacturer FRO even. After changing the boot priority is trying to start your computer by using the bootable USB key.

  To run the repair to start the Windows recovery environment (WinRE), follow these steps:

  • Insert the Windows installation disc in the disc drive, and then start the computer.
  • When the message press any key to start from the CD or DVD is displayed, press a key.
  • If your PC does not automatically detect the media
  • When the computer reboots, read on screen for instructions that explain how to interrupt normal startup and access the basic input/output system (BIOS) configuration utility. Most PCs use the F2, F10, ESC or del key to start the configuration of the BIOS.
  • Looking for a tab in the BIOS configuration utility that is labeled boot order, The Options of Bootor Boot. By following the instructions on the screen, use the arrow keys to go to the boot order, and then press ENTER.
  • Locate the flash USB, DVD or CD player (this could be called removable device) in the startup list. By following the instructions on the screen, use the arrow keys to move the drive to the top so that it appears first in the startup list. Press ENTER. The startup command sequence is now changed to boot from the flash drive, CD, DVD, or USB.
  • Press F10 to save your changes and exit the BIOS Setup utility. Select Yes in the confirmation window. The PC will restart.
  • Select a language, a time and a currency, a keyboard or input method, and then click Next.
  • Click on repair your computer.
  • In the System Recovery Options dialog box, select the drive of your Windows installation, and then click Next.
  • In the System Recovery Options dialog box, click on repair your computer.
  • Click the operating system you want to repair, and then click Next.
  • In the System Recovery Options dialog box, click Startup Repair.

  For more information about System Recovery Options, see What are the system recovery options in Windows?

  For more information about the Startup Repair, see Startup Repair: frequently asked questions.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• the update statement modidy

  Hi all

  I have here is the update statement in my code

  UPDATE equip_stg stg

  SET stg.err = 'WRC '.

  WHERE DOES NOT EXIST (SELECT *)

  FROM (SELECT stg.*

  Of equip_stg stg.

  REASON_SETUP sea

  WHERE stg.equipment_fk = mer.equipment_pk

  AND stg.downtime_reason_code = mer.reason_code

  AND ((stg.status = 3 AND sea. REASON_TYPE = 1)

  OR (stg.status = 2 AND sea. REASON_TYPE = 3)

  OR (stg.status = 1 AND sea. REASON_TYPE = 4))

  ERS stg.downtime_reason_code AND IS NOT NULL)

  WHERE ers.equipment_fk = stg.equipment_fk

  AND ers.downtime_reason_code = stg.downtime_reason_code

  )

  AND stg.status IN (3,2,1)

  AND stg.downtime_reason_code IS NOT NULL;

  The statement above sets updated the column equip_stg in WRC if err for corresponding material and reason, there is no line in the REASON_SETUP table.

  I want to change the code above so that the validation above is first done with REASON_SETUP according to equipment and column of type of reason. Is there is no line for this type of material and the reason in this table, then he must hit lookup table.  Example, I have data from equipment EQP1, status = 3, then it should check if REASON_SETUP has everything save for EQP1 equipment and the reasoning of type 1. If she made the next record should be validated on the table otherwise come file should be validated against the lookup table. For the table of choice also I have same join conditions

  STG.equipment_fk = lookup.equipment_pk

  AND stg.downtime_reason_code = lookup.reason_code

  Thanks in advance.

  Kind regards

  Amrit

  Hello

  I think I see.  All lines for each (equipment, reason_type) will be removed completely on a table or another. reason_setup if possible and looking as if this combination never occurs in reason_type.  Another way to say it is that you want only (equipment, reason_type) groups of the best tablle, where reason_type is better than search.  Exactly what made a Request Top - N .  Here's a way to do it:

  UPDATE equip_stg

  SET err_code = "WRC".

  WHERE (equipment, downtime_reason_code) NOT IN

  (

  WITH union_data AS

  (

  SELECT 'A' preference AS, reason_code, reason_type, equipment

  OF reason_setup

  UNION ALL

  SELECT equipment, reason_type, reason_code, 'B' AS preferences

  SEARCH

  )

  got_r_num AS

  (

  SELECT equipment, reason_type, reason_code

  DENSE_RANK () (PARTITION BY MATERIAL, reason_type

  ORDER OF preference

  ) AS r_num

  Of union_data

  )

  SELECT equipment

  DECODE (reason_type

  1, 3

  3, 2

  )

  reason_code

  OF got_r_num

  WHERE r_num = 1

  )

  ;

  To see how this works, reconstruction of the NOT IN subquery, step by step.  First run just union_data as a stand-alone application.  When you understand what it does, run got_r_num and when you see what he's doing, run the set NOT IN subquery.

• Decode function in the Update statement

  Hi all
  
  I'm writing a query where I can update a pastdue_fees column in a table of book_trans based on a difference between the return_dte and due_dte columns.
  
  I use Oracle SQL. That's what I have so far for my decoding function:
  
  SQL > SELECT
  2 DECODE (SIGN ((return_dte-due_dte) * 2),)
  3 '-1 ', ' 0',
  4 '1', '12', 'Null')
  5 FROM book_trans;
  
  DECO
  ----
  Null value
  12
  Null value
  0
  
  If the logic is that, if the sign is - 1, the value in the return_dte column must be 0; If it is + 1, then it has 12 and everything else is Null.
  
  So now, I have to conclude my function of decoding of the update statement to update the columns. However, I get the error messages.
  
  The logic should be:
  UPDATE book_trans SET PastDue_fees = decode (expression)
  
  I gave him a few different tests with the following results:
  
  SQL > UPDATE book_trans
  2 SET pastdue_fees = SELECT
  3 DECODE (SIGN ((return_dte-due_dte) * 2),)
  4 '-1 ', ' 0',
  5 '1', '12', 'Null')
  6 FROM book_trans.
  SET pastdue_fees = SELECT
  *
  ERROR on line 2:
  ORA-00936: lack of expression
  
  
  SQL > UPDATE book_trans
  2 SET pastdue_fees =
  3 DECODE (SIGN ((return_dte-due_dte) * 2),)
  4 '-1 ', ' 0',
  5 '1', '12', 'Null')
  6 FROM book_trans.
  OF book_trans
  *
  ERROR on line 6:
  ORA-00933: SQL not correctly completed command.
  
  Any help or advice would be greatly appreciated I got SQL for about six weeks and not very competent!
  
  Thank you!

  882300 wrote:
  Hi all

  I'm writing a query where I can update a pastdue_fees column in a table of book_trans based on a difference between the return_dte and due_dte columns.

  I use Oracle SQL. That's what I have so far for my decoding function:

  SQL > SELECT
  2 DECODE (SIGN ((return_dte-due_dte) * 2),)
  3 '-1 ', ' 0',
  4 '1', '12', 'Null')
  5 FROM book_trans;

  DECO
  ----
  Null value
  12
  Null value
  0

  If the logic is that, if the sign is - 1, the value in the return_dte column must be 0; If it is + 1, then it has 12 and everything else is Null.

  So now, I have to conclude my function of decoding of the update statement to update the columns. However, I get the error messages.

  The logic should be:
  UPDATE book_trans SET PastDue_fees = decode (expression)

  I gave him a few different tests with the following results:

  SQL > UPDATE book_trans
  2 SET pastdue_fees = SELECT
  3 DECODE (SIGN ((return_dte-due_dte) * 2),)
  4 '-1 ', ' 0',
  5 '1', '12', 'Null')
  6 FROM book_trans.
  SET pastdue_fees = SELECT
  *
  ERROR on line 2:
  ORA-00936: lack of expression

  SQL > UPDATE book_trans
  2 SET pastdue_fees =
  3 DECODE (SIGN ((return_dte-due_dte) * 2),)
  4 '-1 ', ' 0',
  5 '1', '12', 'Null')
  6 FROM book_trans.
  OF book_trans
  *
  ERROR on line 6:
  ORA-00933: SQL not correctly completed command.

  Any help or advice would be greatly appreciated I got SQL for about six weeks and not very competent!

  Thank you!

  If you really really really want to update the entire table, the syntax would be...

  UPDATE book_trans
     SET
        pastdue_fees  = DECODE(SIGN((return_dte - due_dte)*2), -1, 0, 1, 12, Null);
  

  I took out all the single quotes. If you actually have a string column and store all numbers in there so it must be reported as a NUMBER column and not a column of type character (varchar2).

  ALWAYS use the appropriate data type, it will save you a ton of headaches in the future.

  Also, since you are new to the forum, please read the FAQ to learn etiquette and what not.

  http://wikis.Sun.com/display/Forums/Forums+FAQ

• need help with the Update statement

  Hello
  I received a question in a course and I tried my best to respond, and now my brain is giving. I would really appreciate help with the update statement. I don't mind if you do not validate a solution, a little nudge in the right direction would be really useful. I'll post that I got.
  
  THE QUESTION
  / * For these agents disabled on more than seven missions, change their date of deactivation of the first date of deactivation of all the agents that have been activated in the same year as the agent that you update currently.
  */
  
  I have it divided into parts, here is my select statement to agents disabled on more than 7 missions, which produces the deactivation_dates in the agents table that I want to update...

  SELECT
  s.deactivation_date
  FROM
  (
  SELECT
  a.deactivation_date,
  count(m.mission_id) as nomissions
  FROM
  agents a
  INNER JOIN
  missions_agents m
  on
  a.agent_id=m.agent_id
  GROUP BY
  a.deactivation_date
  ) s
  WHERE
  s.nomissions>7 AND s.deactivation_date IS NOT NULL

  .. .and the code for the first date of deactivation for each year of activation agent

  select 
  a2.deactivation_date
  from
  agents a2
  where a2.deactivation_date= 
  (
  select min(a.deactivation_date)
  from 
  agents a
  where to_number(to_char(a.activation_date,'YYYY'))=to_number(to_char(a2.activation_date,'YYYY'))
  )

  ..... I am not real to marry these two statements together in the Update statement. I can't extract each date of deactivation produced in the first select statement and their match against the first date of deactivation in the year they have been activated for the second select statement.
  
  Any help greatly appreciated... :))

  I began to wonder how things would :)

  user8695469 wrote:
  First of all why he chooses the date the earliest of all agents

  UPDATE  AGENTS_COPY AC /* (1) */
  SET     DEACTIVATION_DATE = (
  SELECT  MIN(AGS.DEACTIVATION_DATE)
  FROM    AGENTS_COPY  AGS
  ,       AGENTS_COPY AC /* (2) */
  WHERE   TRUNC(AGS.ACTIVATION_DATE,'YEAR') = TRUNC(AC.ACTIVATION_DATE,'YEAR') /* (3) */
  )
  

  He recovers as soon as the subquery has not been correctly set in the SET clause. It seems you are trying to update a correlated, but we are still having a conceptual shift. I have added a few comments to your code above and below will explain.

  (1): when you do a correlated update it is useful to the table alias that you did right here.

  (2): this table statement is not necessary and is the reason why the FIRST deactivation date is selected. The alias that you use (3) refers to THIS table, not the one defined in the update statement. Remove the line indicated by (2) in the FROM clause and a correlated update will happen.

  and secondly why is it to update each row, when I thought that I'm just the lines where the agents are disabled and missions > 7? Pointers on where I'm wrong would be very appreciated. (SQL = stupid query language!) :)

  user8695469 wrote: then why is it to update each row, when I thought that I'm just the lines where the agents are disabled and missions > 7? Pointers on where I'm wrong would be very appreciated. (SQL = stupid query language!) :)

  
  WHERE EXISTS
  (
  SELECT
  a.agent_id,
  count(m.mission_id)
  FROM
  agents a
  /* INNER JOIN AC ON AC.AGENT_ID = A.AGENT_ID */
  INNER JOIN
  missions_agents m
  ON
  a.agent_id=m.agent_id
  GROUP BY
  a.agent_id,
  a.deactivation_date
  HAVING
  count(m.mission_id)>7 AND a.deactivation_date IS NOT NULL
  )
  

  Once again this problem is similar to the question above that a correlation update doesn't work. Test existence of lines in an EXISTS subquery. Since your subquery is not related to the table that you are trying to update, it will be always return a line and, therefore, it returns true for EACH LINE in the AGENTS table. To limit the game to only agents > 7 missions results, you need to add a join condition that references the table in your update statement. I added one above (with comments) as a sample.

  I recommend you look over all material that you have associated with correlated subqueries, including documents that I posted above. This seems to be what you're having the problem more with. If you need me to explain the concept of correlated queries any better please let me know.

  Thank you!

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• Re: Restoration of windows after abrupt during the update

  Hello world

  Last night I was updating my windows on my Toshiba laptop, however, my laptop suddenly shut down during the update process.
  Now, when I start my laptop, I am invited as a system error and I have to put my windows CD to continue. I've never had a CD of windows, and nor have I made a disc of recovery yet, so is it possible possible for me to connect to windows again? I use windows Vista.

  Any suggestions would be grateful.

  Thanks in advance

  You can enter advanced with F8 at startup startup options?
  You can get Vista in safe mode?
  Repair my computer option is available there?

  Try to use this option and you will enter the system recovery options. One of the options it is start repair or system restore.
  Try to fix the system or roll back the OS to an earlier time using System Restore.

• What can I do about 48 error during the update of the iphone 4S?

  What can I do about 48 error during the update of the iphone 4S?

  Hello! Try the procedure described in section of the Apple Support below:

  Solve the iOS update and restore error in iTunes - Apple Support

• Equium A60 crashed during the update of the Bios

  Hello, can someone tell me if this can be repaired. IHAVE an A60 Equium that crashed during the update of the BIOS, now he died nothing lights up.
  Thanks in advance

  I presume that the BIOS chip is damaged. In this case, you can do anything to make it work again. Just approved can help.

  The problem is that the repair can be quite expensive. Check it out. If selling Yes the laptop on eBay and... you know what I mean. :(

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• Satellite Pro L100 - Crash during the update of the Bios

  Hello

  I am the owner of a Satellite Pro L100 (PSLA4E)

  On the Toshiba site I downloaded the BIOS update. While installing I read that it was necessary to supply cable is plugged. Before I could cancel for the cable, he had started and then frozen. The computer stopped working and so I turned it off! Since then, I've read that it was a very big mistake!

  When put on the fan starts and I can hear etc cd drive spinning. After 15 seconds, the screen is blank, the computer starts beeping!
  Is there a way to solve this?

  Thank you very much
  Rich

  Hi Richard

  Seems not good buddy from your description, that something went wrong during the update procedure and now the ROM module has been flashed properly.

  Maybe you area lucky man and the motherboard isn't too bad, but only the Rom module must be flashed again.

  Unfortunately, this must be done by the technician of the ASP. You will need to contact the ASP in your country for assistance.

  Good luck and have a nice day