Line through text mode layout

Similar Questions

• thick line through text page Ubuntu 12,04 14.0.1 FF

  Using Ubuntu 12.04, FireFox 14.0.1
  Displaying web pages there is a "thick line" by the text on the page. Unable to take a snapshot, the distortion disappears. This also happens if I reload the page. If I scroll up/down the distortion comes
  Precedent.

  I uninstalled FF, rebooted and reinstalled. The problem is still there.

  It seems that not every site displays the problem. Also, I've tried chrome and the problem is not
  there. to aid of chrome is not the answer for me, I would still rather use Firefox.
  I'm hoping to get some suggestions or a fix.

  Doesn't it seem related to scrolling? Here are some suggestions to deal with aberrations display:

  Could you try turning off some Firefox settings. I don't know if you have need of all these, but no one seems to solve the problem for everyone.

  You have to restart Firefox in order for these changes to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Edit > Preferences > advanced > General > "Navigation" section

  Uncheck the first 3 boxes:

  1. Use AutoScroll
  2. Use smooth scrolling
  3. Use hardware acceleration when available

  If you think OK and restart Firefox, the problem is solved?

• How to create a diagonal line through text and phone numbers

  I read another post of Indesign who had a diagonal line

  the text, I found this interesting technique and she wondered how

  do you? It is done with character or paragraph styles? (see image below)

  I may never need to use it, but thought it would be interesting to know how to do it.

  just in case where, it can be simple to complicated?

  Your help and your knowledge will be apprieciated

  TREX

  

  Thanks John.

  This is really useful.

  TREX

• Attempt to modify a pdf file - is there a key to strikeover for the current text of the line through text without deleting the text Moose?

  I need to cross out text on a PDF that I am editing.  bar like that but I can't seem to locate this key on the page where I am editing the pdf file in adobe.

  Where can I find it?
  

  Hi dhillionflygirl,

  You can find a tool in the comments pane in Reader and Acrobat.

  Please let us know if you have any additional questions.

  Best,

  Sara

• Text mode reinstall options?

  Is there a text re - install option?  For years, we had a script that we could run that could rebuild all modules kernel interface so that when we arrived at an upgrade of the kernel we could easily get VMware to work with the new kernel.

  The latest versios several had reconstruction built-in feature of VMware itself, which seems like a swell idea - if you have just a copy upgrade.

  I have 50 desktop licenses and another player from 90 or so installs.  I used to be able to open a session on the 30 or so workstations at a time and start the reconstruction process on each of them, simultaneously.  Now I have to do each one, one at a time.  It's very painful.  Installation of the complete product (from the set) is much easier - it detects that I am installing a window in text mode and the perates accordingly, but I didn't understand how to do that when I have to rebuild the kernel modules.

  I can't believe that the ability for a non-graphical regeneration is part, I just can't understand how to access it.  Does anyone have a solution for me?

  Try the following in the command line when the connection as root

  VMware-modconfig - console - install-all

  Another option would be to run through the graphical interface on a single machine and copy the modules compiled on other machines

• Why print preview and print lose lines of text from the image to the screen in the browser

  When I bring up (for example) a magazine article in my browser and you want to print it for future reference, print preview and printed image 'lost' lines of text between pages compared to the original image in the browser. For example: visit this link: http://www.pcauthority.com.au/Feature/408318, how-to-make-windows-admin-easy-with-powershell.aspx?eid=2 & edate = 20150828 & utm_source = 20150828 & utm_medium = newsletter & utm_campaign = weekly_newsletter & nl = weekly and select 'Print' from the menu. Print preview that appears - poster in portrait mode or landscape - loses one or two lines of text for the print version wraps useless. Where the missing text? pagination is not identical, and Firefox seems unable to handle it.

  I use a HP desktop with Intel i7 CPU 8 GB of RAM and Win 7 Pro SP1. Firefox is V40.0.3

  I do not see "imposed by the system of page breaks" encoded in this Web page. It would be difficult for an author of a Web page with an international audience.

  You use A4 paper, but what about those of us using letter-size paper? Page breaks may screw up page print to LETTER, from a Web site to THE like this.
  And what about the 'zoom' different levels? For printing which is called scale preview of Firefox and Page Setup print.
  I put systematically "modest" when printing to save paper, to keep the last page to only a few lines, or when the font size in print preview is too great (IMO) for printing on paper. And the size of police appeared to have worsened as monitor resolutions have gotten larger over the years.

  The only time wherever I lost lines of text between printed pages was when I was "pushing the limits" with the paper up and down / page margins. IOW, too small header / footer trying to get on each page as possible. By default, Firefox a. 5 "margins (left and right) with. 5 "header / footer (top and bottom margins) = letter-size paper. With 'A' type of paper using metric would be tantamount to the margins of 12.7 mm on all four sides. The /metric of inches "toggle" is with the size of the paper, the user has selected.

  Check the Page > margins & header / footer to see if you have the parameters of ~ 12mm or it they are smaller.

• Trouble from the view of lines of text in Firefox, especially if you use AOL mail

  When you move the cursor around the email AOL email list, or around the text in a message, a few lines of text appear blurred: some letters are emboldened and other weakening. When you click on the affected area, he disappears to normal, but can return to blurred when the cursor is moved again. This sometimes happens on web pages too. It does not occur in Internet Explorer, however, so I don't think there is a problem with Firefox.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I have a red circle with a line through it on my need for speed Shift II in my Start menu, the game does not open

  Problem: I have a red circle with a line through it m need for Speed Shift II in my Start menu.   I have never had a red circle with a line pop up on any program in my Start menu, I wanted to know why it happened and how to fix it. The game accepts updates in the form of 'Add packs' of special vehicles in the original site via the EA download manager sports. So I guess that the game is installed correctly, but the game will not open and run at all, not from the start menu, or by clicking the desktop icon. Any help learn more about the red circle with a line about my program and what to do in case it happens again.

  Recently, I installed my Windows 7 Ultimate OS on a SSD which had been replaced because of a total failure of the car. I've updated the operating system with all

  latest updated windows and the updates of my video card, motherboard, HHD and SSD updated; Thus, all the hardware and software are up to date.

  I was going to restore the disk using last good upward from the orginal SSD before he died a month or two ago. So I think this will probably fix my need for speed II problem, but since it's the first time I've ever seen this problem with a program I would like to know how to cope.

  Any help would be greatly appreciated,

  Take care. Skyraider33

  I've never seen what you describe in the Start Menu, either

  You have a new installation of Windows on your new SSD, Yes? If the game is on another HARD disk,
  is that what you did re - install the game after installing the new Windows?
  Otherwise try to reinstall the game and origin. He would register
  entries, both in the previous installation of Windows.

  If this does not help forums EA would probably be a better place to find out if the
  mods are the source of the problem.

• I refine my selection brush tip is a circle with a line through it

  I don't know what is happening, but every time Adobe updated the program happens something evil. I use edge tool I refine my selection for years and now with the last update from last night, it does not work.

  • I make my selection then click on refine edge
  • This opens the dialog box
  • I select the overlay as my display mode
  • Then select the RADIUS tool refine

  Instead of the normal work with any brush I get is a circle with a line through it, so I can't say anything.

  Have they added a new switch that automatically prevents the user to use this tool now? Worked fine a few days before the last update.

  Thanks in advance for any help.

  The biggest problem with these questions is they always happen when you change a photoshoot and cost ridiculous amounts of time and frustration and to prevent on time delivery.

  I guess that Yes JJMack, but to reinstall everything is a pain in the occipital region. I'm on CC and as updates come just click to install. Refining the edges of the selection is such a basis now that I'm surprised that that happened.

  Finally, I called Adobe and solved it. The tech told me that with a few updates the "user settings" file is corrupt.

  He would do a total reset but of course I'm worried of losing work spaces I had worked to build so it copied those on the desktop, then named the settings file... "old"and challenged market PS

  Who have to rebuild the settings file, and we tried again and still had the problem, so he tried a second time and on that one edge tool refine magically started working again.

  My workspaces were rmoved to the right folder and these work now too.

  Now, I can get this finished filming.

  Kind regards

• When I try to edit a room photo in photoshop elements 12, I'm not able to use the slider or one of the drop down menus. All I have is a black circle with a line through it.

  When I try to edit a room photo in photoshop elements 12, I'm not able to use the slider or one of the drop down menus. All I have is a black circle with a line through it.

  Most likely, the images are 16-bit/channel.

  Go to Image > Mode and click on 8-bit/channel and see if that solves the problem.

• Calculate the length of the lines of text

  In a script, I'm inserting text which is a 4 line poem. Each line except the last ends with a hard return ('\n'). I would like to calculate the length (in inches or in another unit of length) of each individual line to find the longest line and adjust the left indent accordingly. Is it possible to get the length of a line of text in a script?

  Thank you!

  A return is \r

  \n is a soft return

  Take a look through the comments here

  http://InDesignSecrets.com/setting-poetry-flush-left-Center-on-longest-line.php

• Cursor type spans multiple lines of text. Photoshop CS6

  In Photoshop CS6 the blinking cursor of type through multiple lines of text (see image).

  

  Making it difficult to select text as it is difficult to say which line the select cursor will (see image).

  

  The text cursor can be resized?  This happens no matter what size of type is used or what paragraph settings are selected.  Everyone knows about this problem?  I use Windows 7 Professional, service pack 1 on a Dell Precision T3500 with 8.0 GB of RAM.

  Yes, the problem is Cambria. I included a link in the post with the details 4. You will need to find a similar font.

  Gene

• Presentation of the bulletin, by aligning the columns, paragraph breaks, and lines of text

  Hello

  I've never drawn a newsletter before.

  It's annoying me because I try to be as meticulous as possible with my alignment, but I noticed there are all things that don't align.

  I have a paragraph style, with a space before and after. I have three columns. When I look at a line of text across all columns of three, they are not aligned. May they line up if I had all the text directly and no image wraps, but the envelopes of the image and the beginning of a new paragraph in column 2, throws the alignment in column 3.

  What is the best way to align things with the least possible effort?

  Are there tutorials on good bulletin of the layout-design? Presentation of the grid?

  Thank you

  Stan

  Learn about the starting grids.

  Bob

• Can I limit the number of lines of text entered into a TextArea?

  Hello

  I use Flex Builder 2 to create an application that allows users to enter text in different TextAreas and eventually create a PDF file with their different text. My only problem is that I can't limit the number of lines of text used in each text box. I can limit characters by using maxChar, but this does not take into account a user entering multiple presses "return" - this does not affect the character limit, but can result in the final PDF layout (spitting the text on page 2).

  Is there a way to keep track and limit the number of lines of text in a text box (in Flex 2)?

  (Ideally I won't disable the ability for users to use the 'back' button to create several paragraphs)

  Any help would be appreciated.

  Thank you

  Ben.

  Hello

  Try this code.

  import

   

  flash.events.KeyboardEvent;

  Import flash.events.TextEvent;

  Import mx.controls.TextArea;

  public class LimitedLinesTextArea extends TextArea {}

  private var numLinesAllowed:int = 0;

  private var moreCharsAllowed:Boolean = true;

  public function LimitedLinesTextArea():void

  {

  this.addEventListener (flash.events.TextEvent.TEXT_INPUT, textInputHandler);

  }

  override protected function keyDownHandler(event:KeyboardEvent):void

  {

  if (this. textField.numLines > numLinesAllowed)

  moreCharsAllowed =

  fake;

  on the other

  moreCharsAllowed =

  true;

  Super.keyDownHandler (event);

  }

  private function textInputHandler(event:TextEvent):void

  {

  If

  (! moreCharsAllowed)

  Event.preventDefault ();

  }

  public function the value numberofLines(value:int):void

  {

  numLinesAllowed = value;

  }

  }

• Just updated to Sierra and updated Pages at the same time. Now when I try to select a line of text I find myself with an insertion point where I stopped by selecting

  Today, I updated for Sierra and updated to the latest version of the Pages. Now I find that I am more able to select a line of text. When I try to do, I find myself with an insertion point where I stopped by selecting, but nothing is selected. This is a bug in the new version of pages or get my wrong settings?

  You use a Wacom tablet by chance?

  Solution: Press the shift key, just before stop selection. And Yes, that sounds like trouble in the Sierra.