Line width setting

Similar Questions

• How to change the default line width in Ultiboard?

  Hello

  I was recently working on my Board and somehow (for screen printing lines) default line width has been set to 0.00004 mils.

  How can I change this default width?

  Thank you

  Nick

  Hi Nick,

  You should be able to set the width of the default drawing for the layers of the toolbar settings to draw that is above the Board default workspace. Select the top layer of the screen and enter a value, it shouldn't forget for the subsequent designs.

  

  See you soon,.

  Jeff

• Can we fix the width of the lines of af: PanelFormLayout, so that the inputText fields adjust line width?

  Mr President.

  My worm jdev is 12.1.3.0

  
  

  Can we fix the width of the lines of af: PanelFormLayout, so that the inputText fields adjust line width?

  When I put a viewobject as a form with two rows in the panelbox, then the inputtext fields have different widths to disturb the box width of Panel and the distance between two lines increases.

  I want to keep equal with the panelbox two lines of formatting Panel.

  Concerning

  Select your inputText on pageEditor go to inspector and set width: 150px; in the contentStyle property

  check -binary: customization of the width of a UI control using the contentStyle attribute

  To set the width of the Panel form layout set in the inlineStyle property

  Ashish

• minimum line width for printing

  Hi, I am looking to buy a color laser printer so that I can print my work - I create very detailed art that is designed to be fully seen under a magnifying glass works.

  Printers in my budget tend to have resolution of 1200 x 1200 dpi. does anyone know what the thinnest line/dot (expressed in points), it's that can be printed with precision to the resolution of the printer size? I found with my other printers if the printing line is thinner than the printer can handle, he just prints it thicker.

  Thank you.

  Hello

  Here are some results of the OKI 9600 toner printer test.

  PostScript, 1200 dpi, 121Lpi, based on test models in this doc:

  http://www.FHO-Emden.de/~Hoffmann/raster16052003.PDF

  The mires are vector graphics, a sufficient

  Zoom high for the consultation of the details (about 100%).

  All results by interpreting the prints.

  Page 9:

  Zero width of stripe, 0Y 0 M 0C 100K

  PostScript converts zero printable the smallest line width

  Width: line 1 pair and gap for each raster cell, approx. 121 pairs

  per inch (means: always recognizable about 120).

  The width of each line is 0.5· (1/121) inches = 0.5·25.4mm/121 = 0.1 mm approx.

  Page 10:

  Width of the small line. 0C 0 M 0Y 100K.

  Situation on p.9.

  Page 7:

  Width of the small line. 100 C 100M 100Y 0K.

  Three point inks printed on the dot, but slightly deviate due to

  Recording errors.

  An impression of about 90 pairs per inch.

  Page 8:

  Width of the small line. 80 C 80 M 80Y 80K.

  Situation as p.7.

  Conclusions:

  1. not the resolution in dpi, but frequency of LF in Lpi line sets

  line width minimum wmin.

  2. the width of minimum line, using an ink, is the same, no matter

  What percentage of ink (level) is used. Black lines cannot be

  is thinner than the gray lines.

  3. the minimum line width, using an ink, is approximately equal

  half of the width of a raster cell. wmin = 0.5· (1/LF).

  4. with the help of ink a falling-out appearance more. The thin lines are

  not so sharp. The line width must be larger than wmin.

  5. never use the intense Black of black lines.

  6. never use more than two inks for the lines.

  7. never conceive these charts in RGB.

  Additional information:

  For 1200 dpi and 121Lpi we have N = square (1200/121) + 1 = 100 levels

  by channel, approximately.

  If the toner printer should be 1200 dpi in one direction and 600 dpi

  in the other, then wmin would be always the same, but we had only

  50 levels.

  256 levels can be achieved by the image - or chemicals, but the

  actual number of levels will be smaller.

  Further explanation:
  http://www.FHO-Emden.de/~Hoffmann/colrend290800.PDF

  Cordially - Gernot Hoffmann

• How to create an oval and thicken the line width?

  I need to create the half oval, but I can't seem to make the width of the line thicker? As you can see on the properties box on the right, where it says details of form, I can't click the color or type to change the line width. Why is this?

  Thank you.

  

  Using the tool to create a path in place using change drop down menu shape mode for fill and stroke, the color of your choice and the desired thickness.

  

  

• How to change the line width of underline and color (on my MacBook or iPad)

  When you use my MacBook or iPad, how can I change the line width and color when you use the underline tool or the pencil tool?

  Hi Backpacker48,

  .. using the underline tool or the pencil tool

  I'm fairly certain that you may have about the comment tools.

  To highlight the tool, there is no option to change the line width (thickness).  But you can change the color and opacity.  In addition, you can change the style in the desktop application.

  For the Pencil tools or drawing freehand, you pouvez change the width of the line (thickness) in addition to the color and opacity.

  The key here is to change the properties of an existing comment, once it is added to a page.

  Acrobat Reader DC (desktop application) on your MacBook

  1. Right click on the brand of underscore or existing pencil.
  2. Select properties from the context menu.
  3. Select appearance (if not already displayed).
  4. Specify the value of a property (color, opacity, Style or thickness).

  

  

  Acrobat Reader for iOS (mobile application) on your iPad

  1. Tap the existing underlining or drawing freehand.
  2. Select a property (color, opacity, thickness) in the menu that appears.
  3. Specify the value of the property.

  

  

  Once you change a property (for example, thickness, color, opacity), the mobile app will remember the new value of type specific comment for next time.

  Please let us know if you have any additional questions.

• How to select the paths with the same line width

  I would like to know how to select all the paths within a document whose line width are equal at 0.361 points

  I'd appreciate any help.

  Here you go

  #target illustrator
  
  // script.name = selectPathsThisSize.jsx;
  // script.description = selects pathItems that have the same supplied stroke width; limited to 3 decimals;
  // script.required = a document with at least one path item;
  // script.parent = CarlosCanto // 6/5/11;
  // script.elegant = false;
  
  var idoc = app.activeDocument;
  var strokewidth = prompt ("Enter Stroke Width in points of paths to be selected", 0.361, "Select Paths this size:___");
  
  for (i=0 ; i< idoc.pathItems.length; i++)
       {
            var ipath = idoc.pathItems[i];
                 if ( (ipath.strokeWidth).toFixed(3) == Number(strokewidth).toFixed(3))
                      {
                           ipath.selected = true;
                      }
       }
  
  app.redraw();
  

• Issues of line width

  The problem:

  How can I keep the race the same value when I change the length of a line, I've drawn with the pen or line tool?

  Same question about the rectangle tool. When I draw a rectangle with the rectangle tool and continue to resize the box, changes in line width. I would like to know how to prevent that from happening.

  I use CS3, 13.02 on an Imac.

  Thanks in advance

  Roland

  It is useful to mark these items answered so other people looking for the same info know where the answer and if I get 100 000 points Iget free popcorn.

  In fact, nobody knows what the points are for, but it is very useful mark the answer questions as much as there is no FAQ section more.

  This question is asked a lot.

• The profile and default line widths

  I know this will be a stupid question but here goes.  Just updated to CS5 in CS2 and I can't get the basics to work more.

  Nothing is selected.

  Set the width of the line to 10 points.

  Profile of uniform width.

  Set the brush to ink art - conical race

  Well, now draw with the pencil tool and I get a 10pt line but none related conical.

  Drawing with the brush and I get a tapered to 10 points.

  Now define the profile of width to "width profile 1'.  Everything else unchanged.

  Pencil tool give me a line 1 pt uniform.

  Brush tool gives me a line of 10 points with the profile.

  I'm so confused. How can I get these values by default to work with the pencil tool?

  Apply the stroke tapered to a path and then deselect "New Art has basic appearance" in the appearance Panel menu. Now you can draw such a line as long as you do not change the appearance.

• HELP to get in trouble with line widths

  Hello

  I currently have problems with my width line (stroke) in Illustrator CS6.

  I checked and double checked to make sure "Snap to grid of pixels" is DISABLED.

  What else could be what allows me do not adjust my LOWER widths to 1 px? I need options px.25 et.5

  Thank - you!

  If you select the width from the menu?

  What happens if you come to select the 'Pt 1' and enter 0.5 instead?

• Column width set to 0 when printing to PDF format

  Oracle Application Express Version: 4.2.0.00.27

  Apex listener Version: 2.0

  We have a classic report with 20 columns. Out of them, few are conditional.

  We use attributes of the print to print the report in PDF format. The problem with the PDF and printed, it keeps the column width of all the columns in the PDF file, even if they are hidden. We put the column width for all columns of 20 in the print attributes section.

  Can we set the column width to 0 in the PDF output for columns that have hidden due to the State?

  HI - so what you are trying to accomplish? The conditional columns are not included in the PDF file. And the column width for the PDF file is set as a percentage of the available space. So I guess that what you need is for the remaining columns, i.e. those who are included, to fill the available space, but is not because even if the conditional columns are not displayed, they still use place. Unfortunately, there is currently no way to conditionally set the column width, or update the width of the columns according to the conditions. You can try your own custom report layout, or use the APIs of printing for export and under certain conditions using different presentations.

  I'll take a good score to see if we can improve the logic using the layouts of integrated report to be a little smarter on the use of space when the columns are excluded under certain conditions.

  Kind regards
  Marc

• Stop in the middle of the table column width setting

  I set some tables previously built.

  When you adjust the width of columns, some tables develop the center column and others on the left side of the column.

  Can someone tell me where the setting is for this?

  Thank you very much

  pkahrel wrote:

  Danny meant that you should look at paragraph of parent of the table, not the table itself.

  That's it, thank you. I was struggling to think what to call it.

• problems of line width

  I do not know How to explain it it exactly, but if I work in a new document, and when I want to change the line thickness/width spet of 1pt instantly to the max 1000.0000pt.

  The same goes for and when I want to move an object by pressing the arrow key, the steps are not normal.
  
  When I close the document, I get an error message at startup and Illustrator returned to 'standard', rather than created user.

  
  

  I did a search before work, but I don't know how to call the problem in my own language, and certainly not in English
  

  So I'm really sorry for my bad English, but the problem becomes really boring.
  

  Thank you very much!!

  It is, 1 pt, not 1,000 pt. \/

  

  That's the problem. \/

  

  After pressing the arrow pointing upwards (next step in pt). \/

  

  
  And get notified when it arrives. \/

  

  There is a problem with the units that are on other than American English.

  With the solution of Sanjay, see here:

  Re: Adobe Illustrator 2015 - units-Bug

• Generation of additional lines for sets of lines

  Hello

  I need generate extra lines to my games of lines, which is grouped.

  I need a new line of pro group. I tried to make it with union all, but he does not succeed because I can't give groups how I in advance.

  Could you help me?

  Best regards, Bruno

  Hello Bandla123

  You can use the functions of grouping for this purpose.

  For example, you can use this:

  SELECT col_num, col_text, col_ord

  FROM (SELECT 1 AS COL_NUM AS COL_TEXT, 11 "Apple-1' AS COL_ORD FROM DUAL UNION ALL ')

  SELECT 1 AS COL_NUM AS COL_TEXT, 12 ' Apple-2' AS COL_ORD FROM DUAL UNION ALL.

  SELECT 1 AS COL_NUM AS COL_TEXT, 13 ' Apple-3' AS COL_ORD FROM DUAL UNION ALL.

  2. SELECT AS COL_NUM, ' Ball-4' AS COL_TEXT, 14 AS COL_ORD FROM DUAL UNION ALL.

  2. SELECT AS COL_NUM, "Ball-5' AS COL_TEXT, 15 AS COL_ORD FROM DUAL UNION ALL.

  3. SELECT AS COL_NUM AS COL_TEXT, 16 ' dog-6' AS COL_ORD FROM DUAL UNION ALL.

  4. SELECT AS COL_NUM, COL_TEXT, 17 "water - 7' AS COL_ORD FROM DUAL UNION ALL

  4. SELECT AS COL_NUM, COL_TEXT, 18 'water - 8' AS the DOUBLE COL_ORD

  )

  GROUP BY GROUPING SETS ((col_num), (col_num, col_text, col_ord))

  ;

  I think that this could be the solution for you.

  Best regards, David

• Default line width

  I hope I can explain it properly.

  I had this problem before and it doesn't happen only occasionally. It is however very frustrating because I don't know what the cause and why it happens sometimes and not others.

  I've got CS6 (using the cloud so much more up to date version).

  I want to draw a line segment. I select .5pt to the width of the outline. I draw the line while holding down the SHIFT key, so it's all right. It is default width 1 pt. I select and try to change the width by using the appearance Panel and the toolbar. Automatically default back.

  I draw the line on an angle and it remains a.5pt. But I don't want an oblique line. I want a straight line.

  I draw with the tool pen and applies by default to 1 pt.

  WHY?

  Number to align it on the pixel grid, perhaps?