The profile and default line widths

Similar Questions

• How to change the default line width in Ultiboard?

  Hello

  I was recently working on my Board and somehow (for screen printing lines) default line width has been set to 0.00004 mils.

  How can I change this default width?

  Thank you

  Nick

  Hi Nick,

  You should be able to set the width of the default drawing for the layers of the toolbar settings to draw that is above the Board default workspace. Select the top layer of the screen and enter a value, it shouldn't forget for the subsequent designs.

  

  See you soon,.

  Jeff

• Can we fix the width of the lines of af: PanelFormLayout, so that the inputText fields adjust line width?

  Mr President.

  My worm jdev is 12.1.3.0

  
  

  Can we fix the width of the lines of af: PanelFormLayout, so that the inputText fields adjust line width?

  When I put a viewobject as a form with two rows in the panelbox, then the inputtext fields have different widths to disturb the box width of Panel and the distance between two lines increases.

  I want to keep equal with the panelbox two lines of formatting Panel.

  Concerning

  Select your inputText on pageEditor go to inspector and set width: 150px; in the contentStyle property

  check -binary: customization of the width of a UI control using the contentStyle attribute

  To set the width of the Panel form layout set in the inlineStyle property

  Ashish

• Is there a way to create a topic with a shading behind the text and fine lines above and below?

  I work with InDesign CS6, Windows 7.

  Is it possible, using nets of paragraph, to create a heading with shading behind the text and fine lines above and below the text?

  I would like to create headers that resemble these:

  

  Thank you!

  A way to create a style of stoke (Stripe type) with a small percentage of height up and downstairs dedicated to scratches, then apply the color out in the dialog whn would you apply the contour to your net of paragraph style. The downside to this is that the 'weight' of the two lines can vary when you change the weight of the actual race.

  To avoid this and still be able to ge the fill to expand the width of column, you can use a 1-cell table, or you could use rules above and below and underscore cutom for filling and key line with a tabulation of withdrawal right. If you need space on the left, as shown in the illustration, you would probably need a tab on the left as well, instead of a dash.

• The profile and level? Please help explain

  When you export images I usually use some SOUL and I regularly get error messages that speak to increase the profile and level, but I have no idea what those who want to say or do. I mean, I read the help guide (http://helpx.adobe.com/media-encoder/using/export-settings-reference.html#video_exports_se connections), but the explanations for the profile and level are one-liners that explain all of diddly squat. With what little info cryptic I found on the interwebses, I essentially blindly set settings until I got something close to what I want or need. I had MUCH rather like to understand what they are and how they affect my output so that I can actively solve the problem on my own. so...

  (1A.) What are the profile and level, and what are doing?

  1 (b) that the different digital representations of level way/do? The range of choices (1.0, 1.1, 1.2, 1.3, 2.0, 2.1, 2.2, 3.0, 3.1, 3.2, 4.0, 4.1, 4.2, 5.0, 5.1) appears randomly to my uneducated brain, which probably means that there is actually a very good explanation and precise specifications for each of them.

  2A.) What are some applications of real-world data settings? What is common/widely accepted and used?

  Thank you!

  http://en.Wikipedia.org/wiki/H.262/MPEG-2_Part_2#Video_profiles_and_levels

  http://en.Wikipedia.org/wiki/H.264/MPEG-4_AVC#levels

• Default line width

  I hope I can explain it properly.

  I had this problem before and it doesn't happen only occasionally. It is however very frustrating because I don't know what the cause and why it happens sometimes and not others.

  I've got CS6 (using the cloud so much more up to date version).

  I want to draw a line segment. I select .5pt to the width of the outline. I draw the line while holding down the SHIFT key, so it's all right. It is default width 1 pt. I select and try to change the width by using the appearance Panel and the toolbar. Automatically default back.

  I draw the line on an angle and it remains a.5pt. But I don't want an oblique line. I want a straight line.

  I draw with the tool pen and applies by default to 1 pt.

  WHY?

  Number to align it on the pixel grid, perhaps?

• Need to create the profile and assign it to a user

  I created a profile,

  create the profile j_profile limit

  sessions_per_user 1

  Idle 5

  failed_login_attempts 3

  password_life_time 7

  password_resue_time 10

  password_verify_function by default;

  
  

  PROFILE
  

  also, I created a user rr and assigned to the profile,

  create user rr

  identified by rr

  Profile of j_profile;

  
  

  CREATED BY THE USER

  
  

  grant create session, resource to rr;

  
  

  Grant succeeded
  

  
  

  now I tried to use the command as:

  
  

  Select profile_resource_name, limit

  of dba_profile
  

  where profile = "j_profile";

  showing me 0RA - 00942:TABLE or VIEW IS NOT OUT

  
  

  can you get it someone please let me know the solution?

  
  

  
  

  name of the data dictionary is "sdba_profile".

• Borders and the vertical and horizontal lines

  Hi guys,.

  I'm new to InDesign and I am trying to create the below, but I'm having difficulties.

  How can I create the border and vertical and horizontal lines as shown in the picture? I wan't to make a model of these so that I can easily modify the title and the text and keep the same formatting.

  Thank you!

  

  You must learn to have a little patience. Everyone here is a volunteer, and we all work day, too.

  Your outer rim could be either a stroke applied to a block of text in multiple columns, or it could be a separate framework used closely as a background. If you apply a line directly on the text block, you can add an insert to move the text of the line. Horizontal rules (that's the term for a straight line in page layout) look like they're probably paragraph nets (lines above or below a paragraph). These can be included as part of the paragraph styles applied to securities. Paragraph nets can be adjusted to the weight and position on the basis of either the first or the last line of paragraph (depending on whether the rule is above or below) and can run across the width of the column or just the width of the text, and to add dashes, positive or negative.

  There is no way to automate the vertical rules, at least not with ID right out of the box. You can add a few PlaceHolder rules between columns on your master page, but you will need to override and set them on the page of the document itself. Set benchmarks of rule between columns on the master page would help, especially in a situation where the rule needs to be broken to accommodate something like the floating image.

  You can see if the school library has some reference materials. A particularly good book for a beginner would be Visual Quickstart Guide of Sandee Cohen for InDesign.

• windows easy transfer and pulled the bookmarks and the profile of the old xp system password, why doesn't Firefox recognize the profile and view bookmarks, etc.?

  I FIND THE TRANSFERRED FROM THE OLD XP COMPUTER PROFILE.
  I'M NOT COMPUTER LITERATE, SO I RELATE THAT THE FILE DOES NOT HAVE DATA IN THE FAVORITES AND PASSWORDS.
  I DID A FEW WEEKS AGO AND PICKED UP FIREFOX AND DISPLAY INFORMATION WHEN HE WANTED TO!
  DELL HAD TO DO A RELOAD OF OPERATING SOFTWARE AND I START ALL OVER AGAIN.

  HOW THE DATA GET PICKED UP AND LOADED IN FIREFOX TO USE.
  WENT FROM XP TO WINDOWS 7 SP1

  G ' Day TYRELL.

  Please follow the documented procedure to the recovery of data from an old profile and answer here if you have problems at any stage. Specifically the Favorites are stored in places.sqlite and password are stored in key3db and signons.sqlite (the two files are necessary).

  Please mind that Firefox generates random names for the profile directories: d not copy the directories of any profile, as their name will not work on another computer. Instead, copy the contentof the profile folder.

• I use v20.0.2 and restart using the same windows and tabs does NOT work. I deleted the profile and restarted, etc, but nothing seems to work. What now?

  Don't know what else I can give you here. This particular software function doesn't seem to work.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  You can check for problems with the sessionstore.js and sessionstore.bak files in the profile folder of Firefox that store session data.

  Delete the sessionstore.js file possible sessionstore-# .js files with a number and sessionstore.bak in the Firefox profile folder.

  • Help > troubleshooting information > profile directory: see file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Delete sessionstore.js will cause App Tabs and groups of tabs open and closed tabs (back) to get lost and you will have to re-create them (take note or bookmarks).

  • http://KB.mozillazine.org/Multiple_profile_files_created

  If you use a software like CCleaner cleaning then check the settings in the Firefox application.

• How to return to my original blog design when after I updated firefox my top border changed to only go to half way through the page and a line now headed down in the middle of my blog? On other computers, not just mine.

  I would like to just my blog back to its original format without line in the middle of the page and the top edge across the entire page and not only at half way. This occurred immediately after I've upgraded to Firefox 6. The format of my blog is normal on the other computers, but not normal on my computer. Thank you.

  Hello Cor - el, Yes, it's my site. When I looked at my site on another computer this computer used Internet Explorer for the web, so I thought it was normal. Thank you for the information on 2/26. I have passed your info to my friend who will try to solve the problem. I'll let you know when she solved it. BMB

• my monitor displays properly, the blue and yellow lines horizontally and vertically on the screen

  monitor the display that is not right, when you move the slider it filled with blue, there are blue lines across screen

  Hello

  1 did you changes to the computer before the show?

  2. the make and model of the computer/monitor?

  Note: Make sure that the cables are connected properly to the screen and try replacing the monitor cable and/or monitor itself.

  Method 1:
  Resources for troubleshooting problems in Windows XP
  http://support.Microsoft.com/kb/307960

  Method 2: Uninstall and reinstall the display drivers and see if that helps.
  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the graphics card, right click on the map
  (d) click on uninstall
  (e) now go to your computer/device manufacturer site, download the updated drivers and install them.

• How to make SQL * more count the comment and blank line numbers?

  Hello

  Parameter	Value of the parameter
  Oracle version	Enterprise Edition Release 11.2.0.1.0 - 64 bit
  OPERATING SYSTEM	Linux Fedora Core 17 (X86_64)

  I would like to know, is it possible to force SQL * Plus to provide the number of the current in the source file line whenever there is an error? I often put in the first line of my script SQLBLANKLINES the VALUE ON that I may be able to put several consecutive blank lines in my code (I do that sometimes, when I find that it is appropriate to make my code more readable or a sequence of instructions which I believe make their logic more comprehensible for the reader of the Group)

  Now the problem is that SQL * Plus will ignore these empty lines and whenever there is an error, the line number in the error message does not match the actual line number in the source file, but it seems to be the last non-empty line in the file.  Consider the following example:

  SET SQLBLANKLINES ON;
  
  DECLARE
      var PLS_INTEGER := 10;
  BEGIN
  
  
      
      var := 20
  END;
  /

  In the code above on line 9 (also counting blank lines), there is an error (no semicolon at the end of the var: = 20) but when I run the script

  SQL * also, here is the error message I get

  
  

  SQL > @myscript.sql;

  END;

  *

  ERROR on line 8:

  ORA-06550: line 8, column 1:

  PLS-00103: encountered the symbol "END" when expected in the following way:

  * & = - + ; <>/ is mod remains not rem

  < an exponent (*) > <>or! = or ~ = > = < = <>and like2 or

  like4 likec between | submultiset of type multiset Member

  The symbol ';' was replaced by 'END' continue.

  
  

  SQL >

  
  

  As you can see the error message indicates that the error was found on line 8, while in the file, it's really on line 9

  As long as the number of lines in the script is limited, this may not be a problem and we can quickly find the actual line number in the code that causes the error, but for a code, including hundreds (or even thousands) of lines and with many comments and blank lines, find line number given by SQL * error message more becomes complicated.

  So my question: is it possible to make SQ * more properly draw the line numbers, as they appear in the source file?

  Thanks in advance,

  Kind regards

  Dariyoosh

  Hi, Dariyoosh,

  The line numbers in error messages are always from the beginning of the statement, but not the file.  The back-end which checks the errors and generates the error message, has no idea if this statement has appeared in your file, even if the statement was in a file at all, or if it comes from multiple files, each with its own line 1.

  You can divide your scripts into parts, so that the long statements, which may lead to error messages, are each in a separate file, so the statement starts on the line 1 of the file.

  For example, you can call a script called fubar.sql, which looks like this:

  SET SQLBLANKLINES ON;
  
  @@fubar_1
  

  Which calls another script, called fubar_1.sql, located on the same directory as fubar.sql, that looks like this

  DECLARE
      var PLS_INTEGER := 10;
  BEGIN
  
      var := 20
  END;
  /
  

  You never call him directly fubar_1.

• Confused on the conversion of the profiles and effect on values of ink!

  Hi, I wanted to understand what is happening to my values of ink when I convert to a different profile. I set up CS for Europe prepress and working on an INDD file. All related PS images have the same profile.

  The printer sent their profile and asked to convert all the images and the doc INDD. But when I do, looking at the images of PS with color sampling, it changed the values of ink. (For example, which was 100 k in a picture now shows ink in all 4 channels.) It is a problem for me.

  In the past I would just convert to profile to export > stage of pdf which seems to work ok. What should I do? Is there a difference in the printer if I convert to pdf stage, rather than convert all the images of PS and the INDD doc?

  Thanks in advance!

  Converting to a profile Exchange actually ink values?

  In your case, change the profile of the application, will change the values of the ink, but it is difficult to tell how many without comparing the two files.  If you can, try to change the profile on a copy of one of your files.  Then, print proof of contract of the file (if you can).  You can also consult the percentages with the help of a kind of third-party application, Acrobat or Photoshop.

  I think that if you keep your profile until you create the PDF file (where you will ultimately use their profile in the creation of PDF), then maintain you control over your initial destination of color.  A seller of printing has created a profile based on their press, a certain type of paper and implemented (or should have) appropriate for this particular press and paper ink densities.  Using their profile in the creation of PDF files, give them what they want for their RIP.  It's the kind of a way for the supplier to predict the amounts of ink they will get.

  Now, if you give the same PDF to another provider of printing, it may be a 'change', how big or how small is determined by the new provider profile.  So, you don't want to put the same PDF to another printer.  You would be better to get the new print provider profile and use it in the new PDF creation for this printer.

  What is the advantage of convert to profile the printer early in the workflow rather than export pdf stage? (No means that you will have to go back and change all that if, for example, you were to send the job to another printer at a later date?)

  Yes, he average woukld changing all the files in a new destination profile.  There is an advantage if you rely on future jobs to everybody as a simple pressure on the use as a type of paper.  This is often referred to as closed loop to a workflow.  In a closed-loop workflow, you can optimize the density of ink to a press / paper and get consistent results.  When you are potentially going to send the PDF file of several different suppliers, it is referred to as a workflow of open loop.  In an open-loop workflow (yours), you use profiles standard in forecasting for where printing will be.  In the case of your seller who provides you with their printer profile, you simply create another PDF using their profile while retaining all the original application profiles.

  Another thing I don't get - check separations in Acrobat all my text on the black plate only. But when I check the rich black option, it shows the same as dark black text. How can this be?

  I don't know what is happening there.  Since your black (should be) excessive printing, they can be considered as rich blacks even if they are not.  Maybe if blacks were boring, then they would be precise blacks.  That said, the separations to tell the whole story.  If they appear black precise in the seps, then they should RIP like this.  Another reason to be in contact with the print provider and make sure that you get what you want on the press.

• CS4 - resizing the frame and content in "width" transform range...

  We must picture resizing placed, but the framework and the content at the same time with writing accurate dimension in "width" transform range. Problem is that this single image is resized. If we choose the photo with the direct Selection tool, only the content is scaled.

  Write your dimension to the percentage field (the one with the number 100% all the time) and press ENTER. Don't forget not to put inches or mm with your numbers... otherwise indesign thinks you want to use percentages. Close the chain icon if you want to limit the proportions.