Link SQL 2012 or 2016 with a form in Dreamweaver

Similar Questions

• Clusering SQL 2012 on ESX 5.1

  Hello

  Can someone tell me the current state of Microsoft Cluster Services with Vmware Esxi 5.1? This link says that it supports HA and DRS:

  VMware KB: Microsoft Clustering on VMware vSphere: guidelines for supported configurations

  This link says that it is not:
  

  http://pubs.VMware.com/vSphere-51/index.jsp?topic=%2Fcom.VMware.vSphere.MSCS.doc%2FGUID-6BD834AE-69BB-4d0e-B0B6-7E176907E0C7.html

  I'm looking through availability of AlwaysOn SQL on a 5.1 ESXi cluster groups and want to confirm the status of HA and DRS support on this cluster? My availability of AlwaysOn SQL group won't use shared storage (witness file share that will be used), but it is always based on the Microsoft Clustering Services. I think to create 2 WindowsServer 2012 SMV, Setup Windows clustering services with haste VMDK thick set to zero (no RDM), on a cluster HA and DRS activated, but DRS and HA disabled for my cluster of virtual machines. This is a supported scenario?

  It would be good to hear from people who have something similar.

  Thank you

  Follow the article. With your Setup program that do not rely on the shared disk, SQL 2012 VM in the AlwaysOn Availaibity group will be just an another VM and can be protected by HA. It can also use vMotion and DRS.  Just install anti-affinites rules to make sure that the SQL VM do not sit on the same ESXi host.

  Added information here http://www.vmware.com/files/pdf/solutions/SQL_Server_on_VMware-Availability_and_Recovery_Options.pdf

• SCOM R2 2012: SQL 2008 R2 is not discovered in SQL 2012 6.5.1 MP

  We use SQL 2012 6.5.1 and 2012 R2 SCOM management pack for SQL monitoring.

  All servers SQL 2012 and R2 are discovering and monitoring works very well with any problem.

  But 2008 and 2008 R2 servers are not get discovered, we verified that all user-level permissions are fine.

  Please give any suggestion to solve the problem.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  TechNet Server forums

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• sql 2008 Server reports run on sql 2012?

  Suppose that I already had reports from SQL 2008 Server and now there are 2012 SQL server computer, my reports of SQL 2003 server would work on Server SQL 2012?

  What this has to do with Windows Update for Windos XP?

  SUPPORT IS LOCATED IN THE SQL SERVER FORUM:
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• Files corrupt in MS SQL 2012 management downloads

  Is there a better method to download file?  I tried to download SQL Management Studio 2012, and each time it has been corrupted, as well as the other SQL 2012 xxxx_x64.exe type files available to choose.

  I tried several times to download these files SQL Express 2012, and they all have been corrupted somehow. I have installed all updates of IE 11.0.16, and foregoing, that's what I get when I look at with 7 - zip.  I have a x 64 installation on an Intel Core i7 960 Win7UltSP1, 3.06 GHz, 6 GB RAM, etc.

  Is there a better method to download file?  I tried to download SQL Management Studio 2012, and each time it has been corrupted, as well as the other SQL 2012 xxxx_x64.exe type files available to choose.

  I tried several times to download these files SQL Express 2012, and they all have been corrupted somehow. I have installed all updates of IE 11.0.16, and foregoing, that's what I get when I look at with 7 - zip.  I have a x 64 installation on an Intel Core i7 960 Win7UltSP1, 3.06 GHz, 6 GB RAM, etc.

  Hello

  first of all, I have good malware scanner and then pull up to your CMD prompt and run in ADMINISTRATOR mode... scan files

  so it will look like this on the fast line

  sfc/scannow

  If it detects the wrong files it will try and fix...

  Once that is done and all seems good... Run windows update... and make sure that all THE DRIVERS are updated... There was an update in last 6-8 wks is hitting all the settings, but MS does not move fast on this...

  Make sure you restart after every high driver you do as she needs... otherwise nothing will change... go read the forums for malware on bleeping computer dot com and tech guy... you will see a lot of us dealing with this and you will see bugs... these forums are free

  Good luck

• can anyone provide a link to insert the image with the text on the button in the apex 4.2.6

  can anyone provide a link to insert the image with the text on the button in the apex 4.2.6

  ReemaPuri wrote:

  in the workspace image:-resign.jpeg

  

  As a button? Seriously?

  Ok. First of all, because the image already contains text, there no point in including the same wording in the form of text on the button. Accessibility requirements can be met using re-sign as alternative text. 4.2, create an image button:

  Tag/Alt text: Re-sign

  Static ID: re - sign

  Style button: Image

  Button Image: & WORKSPACE_IMAGES.resign.jpeg

  To make the image looks more like a button, add the following CSS to Inline CSS property page:

  #re-sign img {
    margin: 0 2px 2px 0;
    border: 2px outset;
    border-radius: 4px;
  }
  #re-sign img:active {
    margin: 2px 0 0 2px;
    border: 2px inset;
    border-radius: 4px;
  }
  

  Finally, there is a bug in 4.2 that generates the incorrect URL for the button images, which requires dynamic action of Page Load to fix.

  Event: Loading the page

  Action: Run the JavaScript Code

  Code

  var resignImg = $("#re-sign img");
  resignImg.attr("src", resignImg.attr("src").replace("/i/", ""));
  

• vCenter 5.5 U3 supported for SQL 2012 SP3?

  is it safe to use a database SQL 2012 SP3, with 5.5 U3 vcenter Server?

  To VMware vCenter Server 5.5 update 3 Release Notes release notes mention only SP2. SP3 is released for almost 5 months?

  According to VMware product interoperability Matrices, Service Pack 3 for SQL Server 2012 is already supported.

  André

• Integrate Oracle BI Publisher with Oracle Form [authentication]

  Report & Oracle FMW 11g R2 (11.1.2) form

  Oracle BI Publisher 11.1.1.6

  Oracle Database 11 g Release 11.2.0.4.0 - 64 bit Production

  
  

  With the help of the link below, I want to integrate Oracle BI Publisher with Oracle form
  

  http://www.Pitss.EU/fileadmin/Pitss/images/de/White_Papers/White_paper_BIPublisher_WebServices.PDF

  But I need to know one thing, as mention in link, weblogic user/pwd in the java code for authentication with BI Publisher, above

  My Question here, what is the best way to manage authentication with BI Publisher while integrating with Oracle Form?

  I think, in a document, just to mention for example,

  It will not be advisable if keeping the user weblogic/pwd in Java code, at the end of this java code becomes a jar file and deployed to the server and then downloaded to the client computer. ensure that completely and the values are hardcoded, if the password change question once again, this means having user/pwd in jar will never be a good solution.

  For a quick overview, I'd do it keep advice the user/pwd in db in encrypted form and access to oracle form with decrypted and pass the value in the api ReportServiceClient.CallRunReport)

  If you feel, every time you need to access user/pwd of db and decypte it, that I advise you here, get user/pwd when set in the context of db and out of context with decrypted.

  Another may be the best idea.

• "The server has encountered an error" when you want to send a message with the form.

  Hello

  "The server has encountered an error" when you want to send a message with the form.

  With the businesscatalyst site, the message is well received by the recipient as the site FTP host, the previous message is displayed.

  What code do I add and where?

  In advance, thank you.

  Please, answer in french!

  Hello ScratchMaster,

  Please see the link below, I'm sure that you will find it useful.

  https://forums.Adobe.com/docs/doc-3581

  Kind regards

  Vivek

• SQL 2012 still on the use of affinity rules

  Hey guys,.

  I use SQL 2012 alwaya time on in a virtual, but so far, it is not configured as best practices and environment I wanted to change that.

  At the moment I have no DRS rules in place so it can happen that two virtual machines running on the same host and it's something I want to avoid.

  However, my big problem is that I only got a SQL license for two hypervisors and best practices talked about four hosts who are needed to achieve my goal.

  Here is what I intend to implement:

  -Affinity rule machine virtual-VM to separate two virtual machines

  -Affinity VM host rule which VM1 MUST run on ESX1

  -Affinity VM host rule that VM2 MUST run on ESX2

  This configuration is a good idea or could / should I do something different?

  What I found that all the features how for example the evacuation and HA should still work?

  There are many more ESX servers in this group and they will be used in the case of an outtage, right?

  Also there is a dev environment that looks the same. I could include the hosts in the same VM-Host affinity rules or should I create new ones?

  BTW. I am using vCenter and ESX 5.5.0.

  Thank you very much!

  See you soon

  Nicolai

  Affinity rules those you intend to sense. These rules will not be those virtual machines to be on the same host most of the time.

  Note:

  1 rule of VM host is configured as "SHOULD", in extreme cases, DRS can break these rules. However, in the next invocation of DRS, DRS will try to resolve the violations.

  2. Note that: when you keep either the host in maintenance (ESX1 or ESX2) mode, you must manually migrate the VM to another host due to the virtual-VM anti rule machine affinity. DRS even in full auto mode, VM will not be migrated automatically. This will apply only if there are only 2 host in the cluster.

  3. Yes, HA should well with that: however HA is not aware of the rules 'EXPECTED' and in the case of host failure it can not respect 'SHOULD' rule.

  4 rule anti-affinite VM - VM can be sensitized HA using the advanced option. Let me know if you want to help with that.

  5. Yes, failure of other hosts in the cluster will be used but please updated on impact due to rules & licenses.

  6. "There is also an environment-dev which looks the same." I did not follow what exactly you mean here:

  7 migration threshold settings DRS is also important.

  8 DRS gives priority to the prevention of violations of anti-affinity rules machine virtual-VM that violations of rules of affinity. (it's just for your info.)

  Nevertheless,.

  1. If ESX1 falls down or affinity rule VM host that VM1 MUST run on ESX1 gets violated: VM1 can be migrated to other hosts in the cluster. As you have no licenses (more than 2) SQL, how it would be dealt with (I'm not very updated on the SQL licenses)

  2 point above applies to the second rule of VM HOST as well.

• Leaving the vCenter, database SQL 2008 R2 to SQL 2012 R2

  Hi guys,.

  I have a project to move our of vCenter company database in SQL 2008 R2 Cluster at our new farm of R2 SQL 2012, is it as simple as:

  1. backup of database

  2 restore database in SQL 2012 R2

  3. set up new DSN (SQL Native 11 for 2012 R2?) pointing to vCenter server

  OR is there more to him because of the differences between SQL 2008 R2 and SQL 2012 R2?

  PL, refer following links: -.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=7960893

  or even more plus easy & accurate steps are here:-

  Migration of database SQL Server of VMware vCenter. vDestination: you & #039; Re almost there

• migrate from vcenter 5.5 express database to ms sql 2012

  Hello

  recently, we deployed 5.5 vcenter using sql 2008 express (one of the installation options for vcenter 5.5).

  customer request to migrate the database to ms sql 2012, which is located on a remote server to vcenter.

  could someone share with me the procedures how to proceed?

  We tried the DB and restore on sql 2012. But what I do not know how to initialize the connection between vcenter and new DB.

  any help is appreciated. Thank you.

  Merry Christmas!

  Below is the KB Article for 2008, but the measures would remain the same.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1028601

• Support the vCenter running on one database group availability of AlwaysOn SQL 2012?

  I've encountered this question a lot, especially now that people are making more and more SQL 2012 AlwaysOn groups availability.  VMware supports the database of vCenter running on a SQL 2012 AlwaysOn Dag?  I know that vCenter 5.5 now supports SQL 2012 AlwaysOn Failover Clustering (with a shared mode RDM LUN), but I can't find any support statements about the SQL 2012 AlwaysOn availability groups, that make use of the Microsoft replication technology rather than share LUNs.  Does anyone know if VMware has an official statement about this configuration for vCenter?  (Also for extra credit, how about you Update Manager, SRM and the database of the VMware View events?)

  Thank you

  Bill

  N ° they do not.

  KB.VMware.com/selfservice/microsites/Search.do?Language=en_US&cmd=displayKC&externalId=1024051

  What's worse, is that not looking at it that your support contract says, you only get "best effort support" for your environment.

• RDM SQL 2012 Cluster VMs on separate host

  Greetings,

  I'm looking to use RDM for a SQL Cluster in 2012 and go though the process of adding storage the second node shared, I'm a bit confused.

  I'm referencing Document from VMware, "Setup for Failover Clustering and Microsoft Cluster Service". I'm following the steps under "Clustering of virtual machines between physical hosts.  So, I advanced and added my LUNS that are on shared in the ROW to the first node storage.  The next step is to add the hard drive the second node, but this process requires me to select "use an existing drive" and select records that represent the ROW that are stored in the data store where host1 exist.  The document indicates, "select physics like compatibility mode, and then click Next.  The only option I get is, choose the Mode: persistent, Nonpersistent, or None.  I don't have an option to specify the disk as is physical or not.  I did when I created the RDM for the first host.

  Also add the disks as RDM should I stored with the virtual machine (which is on the shared storage) or should I create a separate data store and specify the data store that is on the same shared storage.  Since each of the RDM are separate LUN on the shared storage, I think I'm curious to know if its better to choose the option to store in a different data store, then with node 1.

  Any clarification on this is greatly appreciated.

  See you soon

  I suppose you want to create SQL 2012 Cluster of virtual machines on physical hosts. Please see the steps below.

  I think that there is a typographical error in documents that you won't get the same " physical compatibility mode" option again The disc is already created with a physical as on VM - 1 compatibility mode. Now you have to go with the "select Mode: persistent ' on vm - 2. Once you are done with VM - 2, VM - 2 right click, select the hard disk and observe the compatibility mode is selected physics only.

  RDM disks can be stored on the same data store shared where virtual machines are created or separate shared data warehouses. As your wish where you want to keep. One thing must remember two data stores must be shared with the two physical hosts.

  Thank you

  Atul

• Muse + BC-problem with a form CSS style do Muse Page distorted

  I worked with before Muse for customers and have mixed BC with muse for articles, forms, etc. Normally, I build my sites as a developer with code, so I know the code.

  My problem is that I put a style in a couple of forms for a client who had a website in Muse. No matter how I try to put the CSS with the form, it distorts the page (see below). I tried to insert the form with content with css support inform on top of licensed content, I tried to put in the head of the site of Muse, I tired to modulestylesheet, I tried to put the stylesheet of Muse for a single page, and more, no matter what screws CSS to the top of the page. I'm behind on something that I know it's simple and I can't understand it. Here is the link to the site: MoveQuote and here he right picture each time page to integrate my CSS style.

  

  The shape is fine without CSS and shows, but it is ugly and not what they want... Everyone? I looked at the code, and it seems that it is pushing around the frame. How can I get this CSS works? I am so bored and my client wants their forms.

  Thanks to all those who can help you,

  Sarah @.

  Could you zip your project muse and send it to me if I can see what is happening to you? [email protected] or place in a dropbox download and send me the link?

  See you soon,.

  Craig