Support the vCenter running on one database group availability of AlwaysOn SQL 2012?

Similar Questions

• Replica groups of ' Always on ' SQL Server 2012 - limited to 2 knots on VMWare?

  VMWare KB1037959 provides instructions for Microsoft clustering on VMWare, but does not have SQL Server replica groups cover 2012 "Always on."

  This KB article sets a limit of 2-node MSCS clusters, but also indicates that "the SQL mirror effect is not by VMware to be a clustering solution. VMware supports fully mirroring SQL on vSphere with no specific restrictions. »

  In SQL, 2012 replica groups are a combination of failover Microsoft Cluster Service (MSCS) monitor and SQL database mirroring.  Yo I have to install the 'Fail on Microsoft Cluster' role to implement the SQL replica groups, master didn't have any shared disks.

  I was not able to find guidance on the use of groups of replica SQL 2012 on VMWare.  I hope that it is supported without restriction (as long as you do not use a shared quorum disk), but a strict interpretation of the KB1037959 leads to a limitation of two nodes.

  Can anyone shed more light on this?

  Now the last row of the first table lists:

  Availability of AlwaysOn SQL group

  Yes

  Yes1

  Yes

  Yes

  Even OS/app

  Yes

  Yes

  Yes

  Yes

  N/A

  N/A

  Perhaps this was added recently.

  That answer your question?

• 1Z0-117: Oracle Certified Expert, Oracle Database 11 g Release 2 SQL Tuning

  Hello
  
  I failed the exam 1Z0-047 Oracle database SQL Expert"x 3 and will pass the exam in January 2012. I'm sure I'll spend this time :-) to 95%
  
  Now my question: what's next 1Z0-047? I only know how to leave 1Z0-047. I am SQL scripts to my work, but no DBA work and not of PL/SQL. So I guess that the "Oracle Certified Expert, Oracle Database 11 g Release 2 SQL Tuning" would be the next logical step?
  
  Is 'Oracle Certified Expert, Oracle Database 11g Release 2 SQL Tuning' too complicated for me (only have knowledge of the exam 1Z0-047). Because I don't have experience with the topics listed in the objectives, for the most part never heard talk about.
  
  What study guide?

  So I guess that the "Oracle Certified Expert, Oracle Database 11 g Release 2 SQL Tuning" would be the next logical step?

  I agree with you.

  The Oracle 11 g Release 2 database: review SQL Tuning is still in beta at least until November 24, 2012. Beta versions have been known to be extended. Even if this isn't the case, the examination of the production is not available before mid-January 2013 about. I had one experience with a beta. I hated and will never be another. There is little reason to do so, and most importantly (reduced cost) is not important to me because my company reimburses the cost of my essay, so I don't really care about the savings. They take several times longer to complete and I was a mess at the time that I finished that I did with a headache roaring through a large part of the review.

  That said - answering your question:

  1Z0-047 is a really complicated test. The questions and answers are designed to mislead. There is a reason for that. SQL, by its very nature, is a fairly simple language. Part of its appeal, is that it is easy to understand and write. If the people who wrote the essay was not gone to their best to make the deliberately convoluted SQL code, then it would not have required skills 'experts' to pass. It is much more difficult to read and diagnose poorly written SQL as well written SQL.

  I also took the test Application Express Expert: 1Z0-450. The questions that it were not written in a deliberately confusing manner. However, they had need intimate knowledge of the interface of the Apex. Because it was possible to write questions 'hard' without having to make them deliberately more obscure, the questions were simpler. I did not review SQL Tuning (as I said... no more betas for me), but I suspect that it will be similar to 1Z0-450 has enough information "at the level of experts" to write questions on that test will not attempt to write "hard" questions

  Is 'Oracle Certified Expert, Oracle Database 11g Release 2 SQL Tuning' too complicated for me.
  Because I don't have experience with the topics listed in the objectives, for the most part never heard talk about.

  Not sure what is in the test. This is excellent news. Student for the test will teach you a lot of new things about writing and tuning SQL. In my posts, a concept is repeated again and again. The value of certification is not make a piece of paper to stick in a workbook. The value comes to what new skills you gain in is about to pass the test. If you do not know the information and that you are not studying for the test, Yes, you will not pass. If you prepare for the test until you do understand the objectives, then you should be able to pass the test.

  What study guide?

  None does not yet exist. There is no doubt that I will write a review study guide. It won't be until some time after the test is in production. I do not publish guides for which I hold the certification. Do not wait for good. You can use the same exact source, I will use in his creation - the Oracle documentation. I guarantee you that all topics on the unique OE page and every single question that is under review are answered somewhere in the documentation.

• What exactly will happen to the wizard of Frontpage 2000 database during the XP support runs out?

  I have been using the wizard of Frontpage 2000 database to develop a main set of forms that link in my database access 2000 on the side (non-public) back to my site. I realize that the two programs are considered as obsolete, but unfortunately, I can't find a replacement web development software which is what makes the wizard, unless I want to get heavily into the code (kind of like go back).

  I have windows 7 pro and use virtual xp to run frontpage 2000 for my Web site and data-based forms.

  What happens exactly when the XP support runs out? Y at - it a purchase option to continue with the updates, where I am, as it estimated 15 to 30% of the existing Microsoft customers who are always based on the use of XP will be "punished" to explain their desire to stay with a product that has succeeded all too well? (at least for me as far as where this feature goes)

  Ron

  Original title: end of support for XP

  http://Windows.Microsoft.com/en-us/Windows/products/lifecycle

  Care about the lifecycle of Windows

  See also: http://windows.microsoft.com/eos

  What does support mean to you?

  After April 8, 2014, technical support for Windows XP will not be available, including the automatic updates that help protect your PC. If you continue to use Windows XP, your computer may become more vulnerable to viruses and security risks. For more information, see does that mean if my version of Windows is no longer supported?

• Regarding the hosts took max supported on Vcenter Virtual Appliance 5.0

  http://www.VMware.com/PDF/vsphere5/R50/vSphere-50-configuration-maximums.PDF

  Maximum config guide indicates that vsphere 5.0 supports the hosts of 1000 per VC. The same applies to the virtual appliance thus (on an external Oracle DB... not the one internal)

  Concerning

  Girish

  The same should apply to the device when you use an external database. But with several guests it would be wise to take the same settings with the Windows version of vCenter, which means increase the memory of tomcat and adding vCPUs additional and resources of the virtual machine RAM.

• Migration of the Virtual Center of SQL2005 database to a new server running SQL2008

  Virtual Center 2.5 Build 147633

  ESX hosts 3.5.0 143128

  Separate server database running SQL 2005

  We replace our SQL2005 server with a server SQL2008. We will migrate the database of VC on him. What are the steps on the side of Virtual Center. My plan is to:

  1. Backup the database

  2. Stopping VMWare services

  3. Migrate the database to SQL2008

  4. Change the Virtual Center ODBC connector to point to the new database server

  5. Restart the VMWare services.

  Is there anything, I'm missing or should be cautious?

  just note that, as of today, SQL 2008, is not a database supported for vCenter

  https://www.VMware.com/PDF/vi3_35/esx_3/R35/vi3_35_25_compat_matrix.PDF

• "database %s %s does not support the %s in this context" remote database question.

  Hi all

  In the sub query I used the remote database table in the join. If run the table individually, I am able to see the results.

  Everything into account the remote database table to my request, I face the error below.

  I tried to create the view of the table as below

  Error:

  ORA-02070: database is not supported in this context

  02070 00000 - "database %s %s does not support the %s in this context"

  * Cause: The remote database does not support the function named in

  the context in which it is used.

  * Action: Simplify the SQL statement.

  Error on line: 1 column: 516

  Tried to create a point of view doesn't allow:

  ------------

  CREATE or REPLACE FORCE VIEW winq20 as

  Select * from [email protected];

  --------------

  I face the error for the situation.

  1. to join the remote database table to the query.

  2 try to create the view of the table. make the same mistake.

  ----------------------------------------------------------------------------------------------

  Select * from [email protected] a, all_tab_cols b where a.table_name = b.table_name;

  ------------------------------------------------------------------------------------------------

  Need your help for this problem.

  Thank you

  Fabrice

  This could be due to the long type column. try to remove that.

• Move the database to the server running Oracle 11 G to the server running Oracle 12 c

  I'm trying to find the best way to migrate a database to a server that is running Oracle 11 G on a server that is running Oracle 12 c.

  I tried using the RMAN duplicate command of database but have run in many too many problems when you try to configure both servers before running the command duplicate.  If someone could provide some guidelines on configuring two servers of the RMAN Duplicate command clearly then that would be great.  The other thing, I've tried makes a cold backup of all files for the database (data files, control files, etc.).  Copy them to the new server, and then re-create the control file to include the correct location and names for the data files and the redologs.  After you re-create the database control file does not start.  I suspect that it is because of differences in version.

  If you can provide me with claire (ie. migration for Dummies) instructions to get one of these methods of work, it would be greatly appreciated.  I am also open to any other method you can think of to achieve what I'm trying to accomplish.

  Thank you

  Paul Noyes

  Paul,

  Please, go to the PDF below he explains the process of upgrading.

  You can create all the tablepsaces and then use utility Import/export where the directory paths are different

  http://www.Oracle.com/technetwork/database/upgrade/upgrading-Oracle-database-WP-12C-1896123.PDF

  Thank you

  SK

• Running PowerCLI scripting against vCenter occupies space of database in vCenter?

  Hi all

  Someone can confirm, running or collecting data using PowerCLI against vCenter occupy or use vCenter database space?

  Some commands (generally the things which create, modify (including the power on/off/suspend/move/run, etc.). or remove) will create event entries will be stored in the database of vCenter. Others who may are Connect-VIServer can also register an event. The "Get" cmdlets will not create entered events

  You can identify those who have the VI Client open and see if the script causes all events appear in the lower pane or by running Get-VIEvent on the vCenter server after your script is run (search for events based on the username)

• None of the cells have a vCenter running proxy service

  Came across this question last night.  I have read several sources to see if I can pin point the cause, but no luck so far as communication between the cell and the PB has been affected.  I followed the instructions in KB 1035506 but no change.  I stop the cell through the order of service and then also tried with the cell management tool, no difference.  QRTZ tables get rid of all their entries, but once I start the cell once again, they seem to fill with the same recordset.

  I'm about vCloud 5.1.2.1068441 and the use of MS - SQL 2012.  If anyone has any suggestions where to get then it would be greatly appreciated, thanks in advance.

  OK, just in case others run into this it seems that the KB (I mentioned in my first post) is incomplete dated 24/10/2013.  The correct sequence is, assuming you can afford the downtime:

  1 turn off the cell VM or run the service vmware-vcd stop command on the cell.

  2. THIS STEP IS NOT CURRENTLY INCLUDED IN THE KB.  Shut down your virtual machine, that's what I had to vcenter.  I guess that you can test just closing the service, I was not so inclined.

  3. run the script to clean your QRTZ tables.

  4. NOT INCLUDED (SUCH AS STEP 2).  Feed your vCenter VM backup, if you had closed the service you can try to run at this point.

  5. turn on your cell phone or run the service vmware-vcd start command.

  My translation of the explanation I got from people in support was that both vcenter and the cell needed to stay out of the db while cleaning and the KB was missing the piece vcenter vcloud.  I was told the KB would soon change, but at the same time, this might help.

• Extensions Manager CC does not support the hybrid group of extensions?

  Document adobe® Extension Builder 3.0 release notes ( http://download.macromedia.com/pub/labs/extensionbuilder3/extensionbuilder_releasenotes_06 2413.pdf ) which says " " Extension Manager does not support the hybrid group of extensions"(issue #3549187).  Hmm... Really? Extensions of the hybrid is no longer supported?

  Extension Manager supports hybrid extensions. But we define hybrid as extension: an extension that contains the file mxi, zero, one or more ordinary files and one or more CSXS extensions incorporated. In other words, only CSXS extensions can be incorporated in hybrid extension. If you embed another extension extension or regular hybrid in an extension of the hybrid, it is an invalid extension from the point of view of the extensions Manager.

• What is the effect of subtracting the vCenter and databases

  I have two ESX 3.5.0 u2 SAN connection and a 3.0.2 with disk HARD local only. Regional Norwgian vCenter Server installation, witch has led to problems with the plugin manager update. I have reisntalled the vCenter server on a virtual machine with the English locale, but I used the databese even. I came to the concludes that I have to delete the database and start over. On this topic, I have two questions:

  1:

  When I installed the plugin for update management, it has detected the old database update, but I did not choose wipe it and start over for fear that it would also erase the rest of the database. Info from the Setup Wizard outfits seemed a bit fuzzy. The wizard only will reset the database for Update Manager or will it delete everything?

  2:

  If I delete the database of the vCenter server completely and uninstall/reinstall the server vCenter Server, what happens for both ESX servers with SAN connection? They have both the virtual of SAN computer running. It will come in any kind of conflict or start writing on each of the other files? Or will they continue with the locks on files they already have and not spoil things? Some of the virtual machine that is running on the ESX servers must not stop or have a disk failure.

  Hello

  Yes delete it, the DB update is not a part of vCenter DB. You can install the update on a separate virtual machine Manager if you wish. Have not made myself but have seen a few threds on install on a separate virtual machine. Choose custom installation and provide information about your server vCenter etc.

  -Pal-André

• ADF supports the support database in mode offline, such as Adobe Air, or gear

  ADF supports the following model.
  
  Application supports local database storage which can synchronize with a main oracle database when it is available?
  Something like adobe air or google gears?

  For a Web ADF faces application there is not built based on such. You can run the entire stack of ADF (middleware and DB) on the local computer, and then use DB synchronization service to synchronize.
  Or you can opt to apply for ADF Swing base which can connect to a DB either local or remote client.
  ADF Mobile Client, currently runs on mobile devices and not through a web browser.

• HP Envy 23 all-in-one. : HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs.

  HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs. After that I opened start legacy and power cord from my puss. Help me please.

  Hi there @ZiECloNE,

  Welcome to the Forums of HP Support!  I understand that you are no longer able to boot your computer after a "event for pets.  I'm happy to help you with this.

  Don't forget to check all of your connections, power cord, power adapter, and maybe try another outlet and a direct connection to wall.  If there is no change then the following test: desktop HP - computer starts not (Windows 10.8)

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• The card reader memory 15 one in the e9250t Elite does support the SDXC memory card

  The card reader memory 15-one in the Desktop Elite e9250t does support the SDXC memory card?

  What memory SDHC card?

  That is a good question. Is there a part number on the memory card reader?

  Theuser guide provides the following information only.

  Make sure that the memory card is one of the types supported:
  CompactFlash (I, II, and Microdrive), Memory Stick, Memory
  Stick Pro, MultiMedia, Secure Digital, SmartMedia, or xD.
  Some models may support additional types, such as the SDHC
  (Secure Digital high capacity) memory cards