My printer quit 4500 print but seems to be the signal by computer, it sends just 3 sheets w
My printer quit 4500 print but seems to be the signal by computer, it sends just 3 sheets with nothing on it.
I also have a 7 hp windows computer.
Shane Merci for your comments. On this printer, I worked all day. I have restored my computer, used unhide.exe and about 8 others
solutions. I guess I learned a lesson. You asked if I tried a color image. The reason was that I couldn't believe that I was low on ink.
It's a nice new printer and the computer, but the color cartridge was full b & w was empty. I didn't try the obvious.
dodgeredd
Tags: HP Printers
Similar Questions
-
original title: printer drivers
I have the driver for my printer but when I run the wizard tells me I need us the built in xp Printer Wizard to install the printer on this operating system. When I go to do this, it gives a fall to the bottom of the printers who does not understand my printer HP deskjet 9650.Is there a way do not use the Printer Wizard because I have the right driver. Only, it is not listed through the wizard.Hi michelledumont,
Follow the steps in the article.
Resources for the resolution of the printer in Windows XP problems
For reference:
How to install a printer driver locally for a remote printer in Windows XP
-
I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video. Any suggestions?
As Tom SC replied, you must contact the company that manufactured your computer. In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.
You should probably use a video capture card that can capture from HDMI source,
-
I have both a laptop and a desktop computer and use a modem wired high-speed internet. I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...
Original title: router does not work...
Hello
Welcome to the Microsoft community.
I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.
You must contact the ISP to verify if they can help you with this question.
In addition you can keep these items handy, it might help you.
Set up a wireless router
http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router
Install or remove a modem
http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem
Change modem settings
http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings
It will be useful.
If you need help with Windows, let know us and we will be happy to help you.
-
When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.
Please go to the location of your Lightroom Catalog, and there you will see the folder for Lightroom Catalog Previews.Lrdata
-
HP Photosmart 5520 - can print but scan and copy the work of doesn´t
Hello
I just bought a HP all in one Photosmart 5520. It works fine as a printer, but when I scan or copy I get a 'white' scan / paper in white. And Yes, the text on the paper was facing the Analyzer anyone know whatcould wrong?
Thanks for the reply AndersRH.
Sorry to hear about the issue. Because it seems to be a hardware malfunction, I suggest you call the Tech Support of HP. They may be able to give two options for replacement or trade in options.
If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.
Take care
-
I use Windows 8 Pro, 64-bit on a printer of a6700y Pavilion with a printer PhotoSmart 310. When I print, I get an error message saying that there is an error, and the document will not print. The document prints correctly, but will not remove the file in the print queue... I have to manually delete the file in the queue. Of course, it's a software problem. How can I solve this problem?
Hi eri2198859,
HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
I would like to know what are the errors you receive?
http://www.HP.com/go/tools -
I need to re install my printer but can't find the disc, how can I install without it
I had my laptop wiped clean after a lot of problems with it. It has been upgraded too many windows xp to windows 7. I need to install my printer again but can not find the installation disc, is their way to install without one. My printer is a hp Deskjet 1050 all one j410 series.
Hello
You can use the following link to download the software & driver. Please select the right "bit":
Kind regards.
-
HP C6380 All in one: printer will print but nothing is on the HP C6380 page
Hanging after having been stored for 6 weeks. Printed 4 pages without any problem but knew that my (black) ink level was low so was not surprised when my page 5 fine started, then piddled on. Installed a reprint of ALL NEW HP black cartridge & hit. Absolutely a blank page. Tried a 2nd time... same thing. Pulled the cartridge & checked with a kleenex to make sure that it is pushing ink by - Yes... Clean the printer heads thinking that maybe something is janky to storage. Don't do that - no change. HOW the GET TO WORK ONE I just need to print as 12 shipping labels more TONIGHT & of course she does.
In the paper here troubleshooting steps can help solve the black does not print on your Photosmart C6380.
With a deadline to meet, you could try the following before attempting step 8: go to the driver configuration and change the type of paper for Media Photo. The black cartrdige is not compatible with brilliant photo media, the printer automatically use the cartridge to print black-and-white and color in the selection of media photo.
-
3520 connected usb printing but do not recognize the computer for the scans
DeskJet 3520 used to scan to the computer. The name of the computer used to happen on the screen of the printer when a scan of the computer asked. It does not now. I can't scan from the computer either.
I am still able to print.
I deleted all the programs associated with the printer and reinstalled everything from the Web site. Twice.
Still, this has not fixed the problem. I'm not very computer savy, but I'm sure that I did not interfere with the settings of the printer.
Help
Hey.
Happy to know that you were able to copy. This means that imaging equipment is not broken because the scan and copy times function use the same bulbs and layered imagery. So now, we can have on the appearance of the software.
Allows to use printing HP and doctor Scan for that matter today. It is a software developed by HP for printing and scanning with Windows software problem. You want to run the part "scan fix" the software for this problem.
Click here to download and run the print and Scan Doctor > www.hp.com/go/tools
If please go through this and let me know how the doctor works for you. Have a great day and looking forward to hear back on your part.
-
Have signal via Qosmio player, but failed to retrieve the signal on WMC
I have to be halfway there, but after connecting my NTL cable box to the Qosmio and who received advice to get my signal through the reader and the F2 key, I can't then the signal in Windows Media Center.
As I am only interested in recording TV shows, I really need find a signal through WMC. Please can someone help I think I ever recover calls promised from the technical support line. Oh, I followed all the instructions, but the analysis through Windows Media Center does not give any signal.
ADMISI,
Exactly how do you connect your NTL cable box to your Qosmio?
Willow
-
When I try to print anything on the Web, only the left part of the page will print, nothing in the middle right of the page display. It presents this when you preview before printing. I tried taking OFF reduced to fit and it still does not show the right half of the page, printing is just bigger.
I can print anything Internet Explorer and Quickbooks, but not from Firefox. I downloaded all the versions up to 5.0. He did print prior to upgrade, but I don't know which version actually worked.See if the troubleshooting steps in this article solve your problem: problems printing web pages.
-
Vista recognizes the printer but does not load the drivers - error 0x000003eb
Have even tried to load drivers generic, just to see if it works, no chance. I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.
Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.
Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue). I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista. Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.
I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us. It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me. You really need to discuss this with HP and I don't know that they will have you place and operate at any time. I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation). If you do the research and read relevant articles, I am sure that you can do. No, Vista makes it as easy as XP, but it can still be done.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Well, it's a long story, but EDH to; I had problems with my printer works with Win XP. The same problem as now with Win 7. I have e last driver of Dell, but Win7 says that drivers are up-to-date. The printer appears in the Device Manager, but has the yellow triangle with (!) to score on this subject. When I go to troubleshoot, it says it can't find the updated driver on the internet or the CPU. Win7 says that the printer says that's not covering, check USB port, etc... I uninstalled the driver, let W7 update, and the printer still does not work. What is the reference for this? Thank you... Corn
http://support.Dell.com/support/downloads/index.aspx
You get your Dell printer drivers; NOT through Windows Update.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
E-mail address is removed from the privacy *.
Make sure you have Windows (32-bit or 64) and download the driver for an hp website.
Do not connect the printer when you are asked to do.
Good luck.
Higher than http://www.computerstar.ca/ tech
Maybe you are looking for
-
How to make a certain number of tabs my homepage
Don't keep my tabs clears my home page with each update of FF. I like to have available and NOT pinned tabs but I don't like looking for tabs that I use all the time in the form of tabs
-
Photos do not synchronize to the cloud or other devices
For 2 weeks now my pictures (taken on my iPhone) don't go to iCloud or my iPad. All parameters are the same, can help?
-
Untrusted sites Firefox 31.0 (OSX) with the certificates don't is not loading
As mentioned above, since the update to 31.0 (resettlement 30.0 fixed the problem), I am unable to access new sites with untrusted certificates. I don't get even the option to trust/continue the site simply crashes and never loads. Any suggestions on
-
How to remove com files If you know the name but could not find their file location?
Hello I have recently concluded that my terminal command: pkgutil --pkgs | grep fusekextstat | grep fuse That's what pops up: com.github.osxfuse.pkg.Core com.github.osxfuse.pkg.PrefPane com.google.MacFUSE.Core I want to delete these com files but I c
-
Hi to everyone. This morning I tried to turn on my Smartwatch and it doesn't work. I think that it is hot but not very hot. I press the button more than necessary and it does not work. Any idea?