Link to Blackberry blackBerry Z10 causing problems for my Z10

I swiped my phone security three times in the last 2 days to resolve a problem with texting. I've updated my software via wifi and not link to Blackberry. He has worked to solve the problem, but then the first two times the problem reappeared after restoring a backup. The last time that I restored it manually all I could but lost password and apps which I am fine with. I hesitate to use Blackberry link again as the last update I did the link seems to trigger this problem? Does anyone have any suggestions? My Blackberry has never really been what I would call stable.

All thoughts of my link problem.

I recommend that the updates made on the wifi. Don't do not updated the link unless there was a problem with udpate wifi.

Your carrier will send specific carriers updates which can solve problems like this after an update.

I have a Q10 I'm synchronization by binding, mostly just to test it. I had no problems with it.

Tags: BlackBerry Smartphones

Similar Questions

  • Frequent hard drive exchanges are causing problems for activation of Windows 7?

    I am new to Windows 7.    I frequently switch (turn) the hard drive on my system - say every 6 weeks or more.  I use the same set of 2-3 disks and restore my system from a disk image every time when I exchange them.   Change the drive often happens to cause problems with the activation of Windows 7?   Thank you.

    Hi Lone Star,

    Change the hard drive on systems not prompt swap you for activation but after that the HDD on another system if the operating system is validated activation would be asked that the physical address of machines would have changed.

  • Update blackBerry 10 caused problems

    If this Kill-switch function (another nice thing provided by the flakes and nuts from California), this is what is causing all this time and wrong in my phone, where is the sign of the Opt-out, as defined by the law?

    Topic title edited to reflect the new topic.

    Yes... from the 10.3.1 deployments, there have been many many people have reported problems when using automated processes "update." Reload the operating system (via the 'official' methods) healed often their problems. Sometimes more is necessary, but this is the first step to try to resolve the problems caused by something of potentially wrong with the automatic update process.

    Good luck and let us know!

    PS... the poor OP on this thread, our discussion has gone far off the track. I will ask the mods to divide our discussion of the op.

    PPS... you must also change your profile on this site... He says always "9530" as your device...

    Edit...

    Now that's separate, I'll place some useful links for the recommended procedure.

    The official OS Reload methods:

    The unofficial methods:

  • Is it just me or are just vista security updates that came out yesterday (I think), causing problems for many people?

    There are at least 4 updates that will not install for me.  They hang indefinitely and an error message that says that "windows modules install has encountered a problem and needs to close" anyone having trouble with these updates?  I'm about to just stop updating, I have no choice

    Hello

    Visit this link:
    http://support.Microsoft.com/kb/971058

    Cheers and enjoy... :))

  • September 1, El Capitan security update caused problems for everyone?

    Ghost security update (Wednesday) since the restart I can not save pictures from the web... Help?

    Yesterday (Wednesday 8 September), I checked my desktop App Store for updates. There were three updates ' Collage 3 3.6.0, GIPHY capture version 2.4 version and an update of security of El Capitan.  I've updated. The day applications. The computer is restarted.

    Since this restart

    • I can't pull images from the Internet on the desktop.

    • When I try to type in a browser's address bar, TextEdit, twitter Notes when you press the SPACEBAR, the cursor jumps to the application. to another folder in a window to open files by clicking on the new space bar opens a dialog box containing the details of the case. After that clicking on open and closed space bar folder (if there is no file open window, hit the space bar when typing does not she jumps off the typed text box.

    • Security and privacy / general when I click the lock to make changes. It opens and the user name / password permissions I clique (blue) sounds a release button click, the security and the confidentiality of the dialog box flickers then without effect, the lock is not unlock.

    Tonight, I checked App Store: updates in the last 30 days there is no security updates listed.

    How can I solve my problems?

    Anyone who has met by a ghost security patch in the App Store?

    System: OS El Capitan

    10.11.6 version

    Macintosh: MacPro (early 2009)

    Processor Xeon 3.33 GHz 6-CoreIntel

    Keyboard: Keyboard with numeric keypad - English International wired Apple matching the magic trackpad.

    * With the help of a Mac in isolation. Assistance mac, near Wexford, in Ireland. I am my COMPUTER service. Hoping someone can shed some light on my problems. I have found no mention of anyone else having similar problems when I google my problems. I use Mac since the end of the 1980s (obviously not the one above although I have a Macintosh SE working group.)

    Thanks in advance for your help.

    A few moments ago, I found this on the apple [dot] com/en - that is to say/HT207130 :

    The content of security Security Update 2016-001 El Capitan and security update 2016-005 Yosemite

    This document describes the security content Security Update 2016-001 El Capitan and security update 2016-005

    Released September 1, 2016

    Kernel

    Available for: v10.10.5 OS X Yosemite and OS X El Capitan v10.11.6

    Impact: An application may be able to reveal the kernel memory

    Description: A validation problem was addressed through better disinfection of entry.

    CVE-2016-4655: Citizen Lab and Lookout

    Kernel

    Available for: v10.10.5 OS X Yosemite and OS X El Capitan v10.11.6

    Impact: An application may be able to execute arbitrary code with the privileges of the kernel

    Description: A problem of corruption memory was sent by the improved memory handling.

    CVE-2016-4656: Citizen Lab and Lookout

    2016-001 El Capitan's Security Update and security update 2016-005 Yosemite include security of safari content .

    PS: Safari did not work properly on the Mac since we last updates of Yosemite.

    Thank you for using communities of Apple support, Deirdre-2D!

    It seems that you encounter several different questions since Wednesday last on your Mac Pro. Let's see if we can get these cleared up for you. Test questions you mentioned having tried every troubleshooting step. Don't hesitate to jump steps you have already tried, but let me know?

    1. your Mac hard drive backup - before you start troubleshooting procedures, I always recommend a fresh backup. It is preferable "to have" one the "need."

    2 try safe mode if your Mac does not start -even if your Mac starts, which makes sure it starts successfully.

    3. How to test one question in another user on your Mac account - this will help determine if the questions are found in all your user account or if they are systemic.

    4. on the recovery of OS X - if you're still with these problems, reinstall the operating system on your Mac.

    Have a great day!

  • Windows 7 causes problems for screen - horizontal lines

    I recently installed Windows 7 Ultimate a week ago and in the last two days, when I started my laptop to the top, after 10 minutes, I get suddenly color horizontal lines in the blocks on my screen (screen goes blue or black with colored lines flicker on it), or it flashes and goes blank.

    I have no choice but to force them to close, and then it usually takes 3 or 4 forced outages before it works normally without any problems. It was a clean install and I've updated the display driver, but still have the same problem. The guy who installed Windows 7 back to me, so I can't talk to him to see if he knows what happened.

    It s a computer laptop satellite A350 and has only 7 months. I have not had any problems with Vista, so it seems to me that it is something to do with Windows 7. Can I keep Windows 7 and stop this problem or I have to go back to Vista and if so, how?

    My computer came with recovery etc. discs. If anyone has the same problem or knows how to fix it please let me know, I need my laptop for the exams so earlier I deal with this the better.

    My guess would be some corrupted display drivers. What model do you have? Make sure that you install the latest drivers for you OS.

    It's either that, or your graphics card is overheating.

  • Hub blackBerry Z10 problems

    Hello

    I have problems with my Hub of BB app. I think it started after the 10.3 patch and it worsens with time. The problems are as follows.

    1 hub late.

    When I click for example on SMS, it takes forever to load the conversation screen (we're talking 5 minutes or more, sometimes it won't load at all).

    2. sometimes I can't write a SMS

    When (and if) the conversation screen charge finally and I try to type a text, the screen does not show what I wrote (it freezes for minutes)

    3. I can not send SMS

    If (sometimes), I managed to write the text and press send, hub freezes.

    4. sometimes, I don't get the SMS to another person.

    Strange, that is, the other functions of the hub and the device itself works very well. I tried to reload the software using the Blackberry link, it helped a little (hub is laggy and less the case), but the problems are still there. When the Hub lagg, I also try to reset the hub (using the 5 switch gesture), but it does not help.

    Any ideas on how to solve the problem?

    Thank you for your answer

    Martin

    Thank you. The level of the BONE is fairly new, but not the final Division of 10.3.1.xxxx... In my view, there were 4 releases more in this branch until they stopped and moved to 10.3.2.xxx. However, I don't know if the issues you report are known bugs in this version or not.

    I'm also going to guess that you used one of the automatic methods to update your operating system? Sometimes caused problems.

    So, here is what I recommend you try:

    1. Perform a full backup - use LINK, also copy the contents of the memory of the device manually on your PC and also make a complete manual inventory of your configuration, added applications, identification of account information, etc..
    2. Conduct a WIPE on the device, and then click LINK to restore from this backup. If all goes well, stop.
    3. Lead a focused on the LINK "ResetToFactory., followed by the restoration of the backup If all goes well, stop.
    4. Make a LINK of operating system recharge, followed by restoring the backup. If all goes well, stop.
    5. Perform a reload of the operating system LINK, but don't restore from the backup... instead, reconfigure everything manually from the documentation that you did in step 1 above. If all goes well, stop.
    6. Perform an update of the LINK of the operating system (if it is available). Restore from a backup. If all goes well, stop.
    7. Perform a reload of the operating system LINK (only if an update has been proposed above), but does restore from the backup... instead, reconfigure everything manually from the documentation that you did in step 1 above. If all goes well, stop.
    8. Use an autoloader to load an operating system that is updated on your device, something more recent than you are currently running. Restore from a backup. If all goes well, stop.
    9. Use an autoloader to load an operating system that is updated on your device, something more recent than you are currently running. But do not restore sauvegardΘ... instead, manually reconfigure from step 1 documents. If all goes well, stop.

    Quite painful, I know... I hope that one of the first steps will be successful and you will not have to go all the way through it all. Note that the reason for the complete manual documentation (step 1) is due to the fact that sometimes a backup contains the same corruption, remove... and restore it returns the corruption of the device. That is why the above methods when no restoration takes place.

    Good luck and let us know!

  • BlackBerry Z10 please help! m having a problem with the heat and does not

    my blackberry z10 stand up heat and my apps and setting are not open. When I click it, it redirect me to the 1st screen. even I can not open my setting too. so I can't do a securitywipe also. Help, please.

    Try a reboot first. Hold your power button for about 15 seconds, until you see BlackBerry on your screen. Don't release it before despite what may appear on your screen.

    If this solves the problem, you can reset your phone to factory specifications by using the link to BlackBerry. If I remember, once your phone is connected to the link of the button to press link Options is in the upper right and then Reload Software.

    Keep us updated on your progress.

  • BlackBerry Z10 recharge using Blackberry link

    Hi, when I try to charge my Blackberry Z10 via Blackberry link it ask the password device that I go and she agrees and then it goes to the next screen initialization software update and it's been more than 30 minutes stuck that one screen on the PC and the green light is on, the device. I also want to ask if what he's going to fix my problem of battery because when it reaches 20% if it stops and I have to charge. Which will allow better, a security wipe and a refill using the link to Blackberry.

    Thanks in advance.

    The other thing to try is remove the battery and leave for about 90 minutes. It may take one or two times to do.

    If that still doesn't help not so you can try the wipe of security first, but you may need to replace the battery.

  • BlackBerry Z10 Z10 suddenly stopped synchronization of calendar and contact - link gives BB cannot communicate with connected mssg but displays device

    I think that BB link updated the software in March 2015.  I had been very good sync with my laptop Windows 8 with the Outlook calendar and contacts, but this week it stopped.  BB link watch Z0 connected, but says cannot communicate with the device.  I tried the solution of knowledge base - leave plugged phone with a USB cable, power phone off, then back on donkey wait 3-5 minutes for the pilots to complete loading - but none help.  I rebooted the computer and the Z10 several times, but no luck with the synchronization.  Any help is appreciated!

    Try the following steps, which will completely remove all traces of BlackBerry-link device driver entries and may solve your problem:

    1. Uninstall the BlackBerry link.
    2. Open the Device Manager by pressing the Windows key + R on your keyboard type devmgmt.msc , and then click OK.
    3. Click view , and then click Show hidden devices on the menu that appears.
    4. Expand the BlackBerry section by clicking on the + symbol next to it.
    5. Right-click on the following, and then click Uninstall. In the dialog box that appears, select delete the driver for this device. If more than one of each of the following entries appear, remove them as well.
      • BlackBerry smartphone
      • BlackBerry smart phone
    6. Expand the network adapters section by clicking on the + symbol next to it.
    7. Right-click on the following, and then click Uninstall. In the dialog box that appears, select delete the driver for this device. If more than one of each of the following entries appear, remove them as well.
      • BlackBerry smartphone
      • Tethering BlackBerry smartphone
      • Virtual private network of blackBerry
    8. Restart the computer.
    9. Reinstall the latest version of BlackBerry link.
    10. Try to reconnect your BlackBerry Z10 to the computer and see if she is able to communicate with the BlackBerry link.

    After back and let us know if it works for you.

  • Problem with the microphone blackBerry Blackberry Z10 Z10 :(

    Hello, I had this course of the first three days of my blackberry z10. Then all of a sudden my microphone was not working, I had the OS 10.2.1.2102. Guys I need your help please on how bad this problem. Thank you

    It's against the forum rules to post a link to the possible pages who advocate free software loading and actions that lead to a possible loss of security, while I don't know who is legally available if I post the link, it will probably get deleted anyway not released. It should be pretty easy for you to search and find yourself.

    Regarding the resolution of the problem, I think that it's worth a try, and I probably would if I were in your situation, but in all likelihood, there may be a HW fault so I wouldn't say anyway.

    If you have had only three days and then depending on what country you're in means that you might be able to return any way, you can here in the United Kingdom within 7 days (under certain conditions), but whatever rights you are guaranteed should be always there and if it is a solution of ease for you you might as well try to return it to those who resell it to you.

  • BlackBerry Z10 Calendar Sync problem

    We have a user with a Z10 Blackberry that has problems of timing his appointments and meetings. If they are added via telephone, they will appear on his phone and some of them on Exchange. If they are added through Outlook, they will appear in OWA and some of them on his phone. Both calendars will only show certain meetings created by the other. Meeting types vary. Some are received, some are sent, some are breed some are meetings once. I can't find no link between missing meetings. We have multiple z10 on the and no other z10 displays this question. Suggestions?

    Hey abenning,

    Welcome to the community of BlackBerry Support Forums.

    Thanks for the question.

    This user assigned to a BlackBerry Enterprise Server, or the synchronization of calendar made just through ActiveSync personal?

    Also I would say removing the sync email and calendar via the settings > accounts.  Then configure the synchronization again and test it.

    Let me know if the problem still persists.

    See you soon.

  • Pictures of the blackBerry Z10 move without using Blackberry link?

    Blackberry connection will not be installed correctly on my Sony Vaio. I have tried many, many variations, and I can't seem to install correctly. Therefore, I can't synchronize my Z10.

    I got 120 pictures of a recent sports event that I need to share with other parents. I can transfer one at a time to my PC using Bluetooth, but cannot handle a mass transfer. I could, I suppose, email that all, but it's a mountain of irritation.

    Help?

    Is there another way to shoot these photos of my Z10 for my Vaio? Or if someone found another fix for the problem of the link to Blackberry?

    Nope. Z10 appears on the network but PC (also wireless) cannot access. It has access to the printer on the network then it seems that everything works fine.

    Use DropBox.

    And will call Bell to see if they have any ideas.

    knottyrope says:

    your PC is possible on local network and phone on wifi and WiFi router does not allow traffic between the two?

    or better yet get a box account synchronization between the two, you get 10 GB of free storage which configuration via your phone BB10.

  • BlackBerry Z10 BLACKBERRY WORLD - there was a connection problem, Blackberry World has to close.

    Hi guys,.

    I recently had my blackberry Z10 replaced because one does not turn on at all (after 4 months), my second replacement not detected by my Blackberry link (it was only for a few hours) and now my third new blackberry Z10 has another problem (got it yesterday) - Blackberry world does not load upward.

    Whenever I have load up, I get the error message "there WAS a CONNECTION PROBLEM. BLACKBERRY WORLD SHOULD CLOSE NOW. »

    For someone who had different blackberry phones since they have evolved, im starting to loose faith in all Blackberry phones...

    Does anyone know how to get my Blackberry world working again please?

    I did a traction battery-same error message appears

    I did a complete reset (only had this new phone for 16hours) - same error message

    I did the 'music Soft, three points, clicking on Blackberry world' - the same error message

    Help, please...

    UPDATE:

    My blackberry world works now and I did not do anything else to do the sorting. It seems that regular maintenance is done about it. I would have been nice for us users of BlackBerry phones to be kept informed when there is a scheduled maintenance just if we are aware and in an emergency and we can not use phones...

  • Capture screen blackBerry Z10 image problem

    Hello! I use BlackBerry Z10 for awhile and often use it to take notes and capture screenshots using the two volume keys. (top right of the phone).
    Usually the screenshot is saved in the images of the individual screen tab. But since I did a cleanup of security in order to overcome the problems of the hanging, the image is recorded on the work tab of my phone and I couldn't share it on fb or WhatsApp. Can someone help me to put the images on the tab (screen) personal

    Thanks in advance,
    Faiz

    Hello and welcome to the community!

    Here's a knockout who deals with this situation:

    • KB33788 Photo taken 10 BlackBerry smartphone is not found in the app screen shots

    I hope that it contains something useful!

    Good luck and let us know!

Maybe you are looking for