links appears in the .chm file

Similar Questions

• RH11, in my merged .chm file does not appear in the .chm file master TOC. I have

  My slave merged .chm file does not appear in the master .chm file after generation. Someone at - he seen this happen before?

  Ahhh, a plot twist I see!

  Yes, there was a thread by day or three back where someone tried something similar.

  Click here to see this thread

  See you soon... Rick

• Error message when the chm file is opened and opening topics/links

  Hello

  I am a user of RoboHelp 10 and tried to generate HTML Help. When I try to open the chm file, you receive the following error message. When you click Yes or no to clear the error, it opens OK. The error message also appears WHEN you click a hyperlink in the project or open a topic.

  I use Windows 7 and have a computer laptop 64 bit.

  

  Of course as it seems!

• Any way to link topics to the help file CHM air?

  Hi all

  A client wants to convert its main helpfile for the help of AIR format. However, we need to bind several subjects in an existing CHM (which must remain a CHM) with the help of the AIR file. Is it possible to do this?

  Thank you

  Katie

  Katie Carver

  Senior technical editor

  Doc-to-You, LLC

  Phoenix, AZ

  This comment may be a few months late, but I was able to add a control that opens an Air file from a .chm file.

  You can add a shortcut (Insert< html="" help="" controls="">< shortcut)="" to="" a="" topic="" in="" the="" .chm="" file.="" in="" the="" second="" screen="" of="" the="" shortcut="" wizard,="" specify="" the="" name="" of="" the="" .exe="" file="" for="" the="" air="" help="" as="" the="" program="" to="" run="" when="" the="" shortcut="" is="">

  As far as I know, the Air aid application must be installed in order to link to it. If the shortcut should not link to the .air file but to the created .exe file after that the application is properly installed.

  I don't understand how to link to a specific topic by using Air. There are options in the shortcut Wizard from the command line arguments when you run the program. However, I don't know how to place a link to an html file specific as a command line argument. Any advice?

  -Maura

• Index in the .chm file is incorrect

  Hello

  I use RoboHelp X 5 with Windows XP SP3. I have an index which is correct in RoboHelp, but not in the .chm file. In RoboHelp, I have great book as a keyword and several secondary keywords. However, in the .chm file, secondary keywords appear under General Ledger Journal instead of accounting. I've attached screenshots of the two at the bottom of this post, and I pasted the appropriate section of the project .hhk file. (.Hhk file is really long, so I wanted to insert all this).

  While train to solve this problem, my colleague changed the key word of the great book general Edger and that fixed the problem, but obviously we cannot keep it this way.

  I tried the following:

  • Compared to this section of the Perfect file to others. I may have missed something, but it seemed OK to me.
    
  • Has started the project, removed the Perfect file and then saved a change on the HR regenerated the Perfect file index.
    
  • Delete the file .cpd.
    
  • Deleted and réentré all the keywords.
    

  When the problem started, the subkeywords ledger appeared under periods of future instead of General Ledger Journal - I'm not sure what I did to change it, but I think it was when I removed and then reinstated the keyword for future periods.

  Unfortunately, none of them worked. I saw another thread to a similar issue where the solution was to create a second index and copy the key words on it, but I do not think that X 5 allows a second index.

  Any suggestions will be greatly appreciated.

  

  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = ' General Journal Ledger ">
  < param name = 'Name' value = ' General Journal Ledger ">
  < param name = "Local" value = "GLOverviews\GLJournal_Overview.htm" >
  < / object >
  < ul >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'Preview' >
  < param name = 'Name' value = ' General Journal Ledger ">
  < param name = "Local" value = "GLOverviews\GLJournal_Overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = "fields" >
  < param name = 'Name' value = ' general ledger Journal - fields ">
  < param name = "Local" value = "GLFields\GLJournal_Fields.htm" >
  < / object >
  < /ul >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = "Big book" >
  < / object >
  < ul >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value 'cliché account registration' = >
  < param name = 'Name' value = 'Account snapshot to record Segments' >
  < param name = "Local" value = "GLConcepts\Account_Segments_Record_Layout.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'accounts adding groups' >
  < param name = 'Name' value = "add / change general groups of General ledger accounts" >
  < param name = "Local" value = "GLProcedures\Add_a_General_Ledger_Account_Group.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "adding accounts" >
  < param name = 'Name' value = "Add or change general ledger accounts" >
  < param name = "Local" value = "GLProcedures\Add_or_Change_a_General_Ledger_Account.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = 'chart of daily activities' >
  < param name = 'Name' value = ' General Scriptures daily activities Flowchart ">
  < param name = "Local" value = "GLFlowcharts\GL_Daily_Activities_Flowchart.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = ' data, limiting the export of ">
  < param name = "Name" value = "Limit the General Ledger data export by account number" >
  < param name = "Local" value = "GLProcedures\Limit_Export_of_General_Ledger_Data_by_Account_Number.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'delete accounts">
  < param name = 'Name' value = ' general ledger accounts remove ">
  < param name = "Local" value = "GLProcedures\Delete_General_Ledger_Accounts.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "export information" >
  < param name = 'Name' value = 'Export general accounting information' >
  < param name = "Local" value = "GLProcedures\Export_General_Ledger_Information.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'features' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "charts" >
  < param name = 'Name' value = "General Scriptures Maintenance Flowchart" >
  < param name = "Local" value = "GLFlowcharts\General_Ledger_Maintenance_Flowchart.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = "history, purge" >
  < param name = 'Name' value = ' General Purge history book ">
  < param name = "Local" value = "GLProcedures\Purge_General_Ledger_History.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "Import utilities" >
  < param name = 'Name' value = "General Ledger import Utilities" >
  < param name = "Local" value = "GLConcepts\General_Ledger_Import_Utilities.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "importing information" >
  < param name = 'Name' value = ' import General information book ">
  < param name = "Local" value = "GLProcedures\Import_General_Ledger_Information.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in the accounts payable' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration into accounts receivable' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in Advanced Consolidations' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in the cash management' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in the management of stocks' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in the management of currencies' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in the Po' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'Preview' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "multicurrency reports" >
  < param name = 'Name' value = "Multicurrency Reports for great book" >
  < param name = "Local" value = "GLConcepts\Multicurrency_Reports_for_General_Ledger.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "chart at the end of period" >
  < param name = 'Name' value = ' General Scriptures period end Flowchart ">
  < param name = "Local" value = "GLFlowcharts\General_Ledger_Period_End_Flowchart.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'Registers' >
  < param name = "Name" value = "General accounting records" >
  < param name = "Local" value = "GLConcepts\General_Ledger_Registers.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'reprint transaction records' >
  < param name = 'Name' value = "Reprint of a general register of Transaction of the book" >
  < param name = "Local" value = "GLProcedures\Reprint_a_General_Ledger_Transaction_Register.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = "operations record layout" >
  < param name = 'Name' value = "General Scriptures Transactions Record Layout" >
  < param name = "Local" value = "GLConcepts\GL_Transactions_Record_Layout.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "use the reports as audit tools" >
  < param name = 'Name' value = 'Reports of General Accounting like audit tools' >
  < param name = "Local" value = "GLConcepts\General_Ledger_Reports_as_Auditing_Tools.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "Look at account information" >
  < param name = 'Name' value = 'View General Ledger account Information' >
  < param name = "Local" value = "GLProcedures\View_General_Ledger_Account_Information.htm" >
  < / object >
  < /ul >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'Future of the periods' >
  < param name = 'Name' value = 'Future of the periods' >
  < param name = "Local" value = "GLConcepts\Future_Periods.htm" >
  < / object >
  < /ul >
  < / html >

  Hmmm, weird.

  I would like to try a topic How to associate the keyword of the General Ledger. Compile again and see if anything changes.

  See you soon... Rick

  Useful and practical links

  Wish to RoboHelp form/Bug report form

  Begin to learn RoboHelp HTML 7, 8 or 9 in the day!

  Adobe Certified RoboHelp HTML Training

  SorcerStone blog

  RoboHelp EBooks

• Changes to the headings do not appear in the chm &amp; amp; topics are duplicated

  I imported a RoboHelp 5 project in RoboHelp 7. When I edit a topic, save and generate the main provision (chm) the changes do not appear in the chm unless you go to the topic in the table of contents. Also, double all the topics highlighted in the .chm when I search on a title theme: an old obsolete stuff that I don't know where it comes from and who receives a message "cannot display the page.
  
  I'm so confused.

  Hi, hammer Chick,.

  Here are two recent threads, where other users have reported similar problems:

  "Multiple/broken/repeated in the search results lists.
  "The research of double-entry!

  If the proposed solutions are:

  (1) make a backup of your project, then rename the .cpd file and enter your project again.

  (2) try to create a new presentation from one source.

  (3) check hyperlinks in your topics for everything that inadvertently link to target topics that are above the folder root of the help project.

  Pete

• I imported an EPS layered file in FrameMaker, but ONLY the EPS image appears in the PDF file. How to do everything to appear?

  I imported a file .eps (a barcode) in FrameMaker and found that the omitted PDF everyting but the .eps image.  How can I get FrameMaker to recognize the text and images in the file FM, as well as the image of layered .eps file in the output PDF file? To test this, I also converted the .eps file (in PhotoShop) for a TIFF, JPG and GIF, PSD and imported of each in the doc of FrameMaker and created a PDF file.

  When I imported the FM and PDFd .psd file, all of the text and images of the file FM appeared, but the bar code has low resolution.

  When I imported the TIFF records in FM and PDFd, nothing appears in the PDF file except the barcode image and the text block, to which it is linked. The bar code has low resolution.

  With a JPG image, everything appears in the PDF but the barcode has low resolution.

  With a GIF image, it appears in the PDF, but t barcode a low-resolution.

  First thing you should try is to create a PDF file of the EPS file using Acrobat only. If it does not come out as expected (in the PDF file), then you know exactly where the problem is. Create a PDF file of the EPS in Photoshop is not a good test.

  You also need to update your version of FM12 - you have a patch behind.

• How to add the 'search' tab in the .chm file

  

  Hi all

  All of these days, I was using HR - 5 to create the .chm file. Today, I went to HR - 9. The chm file had the option to search automatically activated in HR - 5. But in RH - 9, glossary option only is available and I am not able to add the adjacent "Search" tab at the tab Index. Please refer to the screenshot for more details.

  Please help me solve this problem that the customer expect tab "Search" for sure.

  Kind regards

  Lata

  Hi Lata

  What show you in your image is a mismatch. The tab says glossary, but the content of the show search tab.

  I think that in this case I suggest you try to define a new window with the attributes you need. Then configure the default window for the page layout that you are using.

  You define the window by:

  1. ensure that Microsoft HTML Help is the default layout.

  2. click on display > pods > project implemented and you should see the windows there.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• some text missing in the chm file

  Hello

  I recently converted to RH9, and I use Robohelp HTML. When I compile a chm file, some of the text in headings does not appear in the chm or 'display the selected item '. Here is an example of the WYSIWYG compared to 'display the selected item '. The chm file has the same missing text.

  

  I noticed that most of my subjects are OK, but who is formatted similarly to this topic are not okay - same problem of missing text (and some weird formatting problems)

  Thank you

  Laura

  First make a copy of your project. Then right click in the paragraph and you will probably see an option to delete or remove attributes. If the first case, it is enough to click on it and try again. If this last click that and you will get a dialog box. It may or may not be obvious to those to be deleted, if it is not obvious, take a screenshot and post here.

  As you will have a backup, he has nothing to lose.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• In RoboHelp 2015, are there changes with regard to the CHM files?

  I would like to know if there is a significant change for CHM files.

  The only option that I use for output is Microsoft HTML Help to generate CHM files. I can't use other (WebHelp and etc.).

  Well, I use the demo version of HR 2015 but I did not notice a significant change regarding the CHM files.

  The dynamic filter is not applied to it. I am currently using RoboHelp 9, so I ask you to these changes because I'm thinking that if it's worth changing HR 2015, because I use the output HTML, I only generate CHM files.

  I am trying to compare the two versions and I try to note their differences, but if you know some that it would be useful for me.

  Sorry if I make mistakes, because English is not my mother tongue. Thanks in advance!

  Hello, Camila

  Your English is very good! Yes, dynamic content filtering is only available with the latest reactive HTML5. Available for CHM output functions are mainly dictated by Microsoft because the format of HTML (.chm) help is their owner specification.

  RoboHelp has added a few things on top of the base CHM (skins for CHMS, glossary and browse sequences, etc.), but you won't find many features more modern in CHMS because Microsoft has continued to develop a long time ago.

  That said, while the CHM format may not have a lot of bells and whistles that you hope to, the new 2015 RoboHelp has many other advantages that make it easier create and justify an upgrade.

  Thank you

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• Problem creating test instance, cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  I got following error when running tests on the Workbench 2.1

  
  

  [February 19, 2014 16:27:10: TRANSPORT] [0] FRAME: Async command is monitored by the process of STAF 73

  [February 19, 2014 16:27:10: FACTORYIMP] SETTING [0]: insert in the container

  [February 19, 2014 16:27:10: TESTHASH] [0] INFO: VirtualMachine installation process

  [February 19, 2014 16:27:10: VIRTUALMAC] [0] FRAMEWORK: the Setup() method called

  [February 19, 2014 16:27:10: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_VM localhost connect password of administrator agent 192.168.8.158 userid: 11:Infocore' 1 q ssl

  [February 19, 2014 16:27:10: STAFBASE] [0] FRAME: command execution STAF: staf localhost VTAF_VM getvms anchor 192.168.8.158:administrator

  [February 19, 2014 16:27:11: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:GetAllVMs (HostName = '192.168.8.150' password = 'infocore"username ="root") returned UNDEF

  [February 19, 2014 16:27:11: VIRTUALMAC] [0] FRAMEWORK: new creation vaaivm1-150 VM from scratch...

  [February 19, 2014 16:27:11: TESTHASH] [0] ERROR: cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  [February 19, 2014 16:27:11: TESTHASH] WARN [0]: found objects that need to be cleaned

  [February 19, 2014 16:27:11: VIRTUALMAC] [0] INFO: cleaning of the virtual machine: vaaivm1-150

  [February 19, 2014 16:27:11: HOSTSYSTEM] [0] FRAME: HostSystem Cleanup() called

  [February 19, 2014 16:27:11: HOSTSYSTEM] [0] FRAMEWORK: the location of the swapfile to the directory of the VM on the host 192.168.8.150 restoration VM...

  [February 19, 2014 16:27:11: HOSTSYSTEM] SETTING [0]: setting VM Swapfile location to use the directory of the virtual machine

  [February 19, 2014 16:27:11: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_Host localhost connect password of administrator agent 192.168.8.158 userid: 11:Infocore' 1 q ssl

  [February 19, 2014 16:27:11: STAFBASE] [0] FRAME: command execution STAF: staf localhost VTAF_Host setswapfilelocation anchor 192.168.8.158:administrator host 192.168.8.150

  [February 19, 2014 16:27:31: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:SetSwapFileLocation (HostName = '192.168.8.150' password = 'infocore"username ="root") '1' returned

  [February 19, 2014 16:27:31: HOSTSYSTEM] [0] FRAME: destruction of object 192.168.8.150...

  [February 19, 2014 16:27:31: LOGMANAGEM] COMMENTS [0]: recovery log file 192.168.8.150 host vmkernel.log

  [February 19, 2014 16:27:31: FILEUTILIT] [0] FRAME: PutTmpDirectory - called for destination host localhost

  The same problem was sloved.

  Re: Hardware Certification-do can not find the storage50info.txt file to...

• Why don't FCP_LOGIN appears in the log file

  We have a shell script that is saved and runs correctly in a dev environment. When impose us this to a new environment, we get the following values that appear on the log file.
  FCP_REQID
  FCP_LOGIN
  FCP_USERID
  FCP_USERNAME
  FCP_PRINTER
  FCP_SAVE_OUT
  FCP_NUM_COPIES
  
  My main concern here is that the name of user and password apps is displayed in plain text. Why it appears in one case but not the other? Any ideas how to disable this option? Could be a parameter in the query competitor?

  900441 wrote:
  We have a shell script that is saved and runs correctly in a dev environment. When impose us this to a new environment, we get the following values that appear on the log file.
  FCP_REQID
  FCP_LOGIN
  FCP_USERID
  FCP_USERNAME
  FCP_PRINTER
  FCP_SAVE_OUT
  FCP_NUM_COPIES

  My main concern here is that the name of user and password apps is displayed in plain text. Why it appears in one case but not the other? Any ideas how to disable this option? Could be a parameter in the query competitor?

  Please see these documents.

  Use encrypt to prevent the Pwd Apps will appear in the journal/Sql Script [377858.1 ID]
  Option Encrypt: Apps passes failed to fcp_login [144850.1 ID]
  How to create a custom program that is simultaneous with host method and passes the parameters to the Script Shell [ID 266268.1]
  Configuration Guide for Oracle E-Business Suite 11i [ID 189367.1]
  Configuration Guide for Oracle E-Business Suite Release 12 [403537.1 ID]

  Thank you
  Hussein

• Cannot open the chm file

  Hello
  
  I found several threads on this site about containing error messages: mk:@MSITStore, but none of them seems to fit my situation.
  I worked in HR on a project, generated a new file chm a couple of times a day. No problem. Then suddenly after generating once, that I could not open the chm - no HR project, not in the folder, not in the copy of the (newly generated) chm on desktop.
  The message is: ' could not open the file: mk:@MSITStore:C:\Program Files\RoboHelp Office...\... \filename.chm.
  I reduced it here with a couple of records, but no, it's not very deep. I ' ts at the same level as my other projects, so it's not the problem.
  
  I can open the former chm files generated to other projects as before, so there's nothing wrong with the help function itself. I tried to remove the chm file, restart my pc, regenerating - but no result.
  
  I also tried the MJ Diagnostics and the only problem found was:
  HTML Help 1.x components workshop * HH not found or not installed correctly. Try to reinstall.
  But it seems that this 1.x is something very old and my installation has worked so far. Do I really need to reinstall something and exactly what and how? Is this a component HR or MS?
  
  Clues are welcome.
  Thank you
  Sara
  
  
  

  Hi John,.

  Thanks for trying to help out. It is now resolved. I should have written the solution here right now, but I was so happy that I could continue my work, so I forget.)

  What I did I looked at the diagram of the single source and I thought the size of the CHM file to optimize could pose a problem (a shot in the water - but you must try everthing). I deselected it and regenerated. Voila - it worked. With trembeling hands, I chose this new and refreshed - it still worked. Perhaps this change of the provision made to re-register correctly, restart from scratch. But I thought I had tried a similar thing before, when a new fact of layouts to see if they would work, and they do not have.

  Thus, it is resolved, but I don't really know what was bad and what was resolved.

  Sara
  

• Bad Table of contents appears in the help file when published

  I have four on my Web server help files. When I try to access these files help, good welcome page appears, but the Table of contents that appears in the help file is the Table of contents of an another help file. My other help files work fine. Anyone who has ever met a similar problem and how to solve? It acts as the projects were merged, even if I never said to RoboHelp to do.

  Had to remove all of the help files on the Web server and republish. This seemed to fix the problem.

• Titles of policies at the beginning of the .chm file

  I recompile a number of WinHelp 2000 projects in Microsoft HTML Help. Some of the .chm files that result are displaying the name of about 20 fonts on the homepage before the main text. It seems to me that some of the source files can have corruption (they are several years old and have been used with RoboHelp in its different forms for a few years now). Does anyone have an idea what is the cause and how to fix it?
  
  TIA
  
  David Anson

  Welcome to the forum.

  This same issue was published a few days ago. Look towards the bottom of the list, or watch clips on my site. It is covered there.