some text missing in the chm file

Similar Questions

• Index in the .chm file is incorrect

  Hello

  I use RoboHelp X 5 with Windows XP SP3. I have an index which is correct in RoboHelp, but not in the .chm file. In RoboHelp, I have great book as a keyword and several secondary keywords. However, in the .chm file, secondary keywords appear under General Ledger Journal instead of accounting. I've attached screenshots of the two at the bottom of this post, and I pasted the appropriate section of the project .hhk file. (.Hhk file is really long, so I wanted to insert all this).

  While train to solve this problem, my colleague changed the key word of the great book general Edger and that fixed the problem, but obviously we cannot keep it this way.

  I tried the following:

  • Compared to this section of the Perfect file to others. I may have missed something, but it seemed OK to me.
    
  • Has started the project, removed the Perfect file and then saved a change on the HR regenerated the Perfect file index.
    
  • Delete the file .cpd.
    
  • Deleted and réentré all the keywords.
    

  When the problem started, the subkeywords ledger appeared under periods of future instead of General Ledger Journal - I'm not sure what I did to change it, but I think it was when I removed and then reinstated the keyword for future periods.

  Unfortunately, none of them worked. I saw another thread to a similar issue where the solution was to create a second index and copy the key words on it, but I do not think that X 5 allows a second index.

  Any suggestions will be greatly appreciated.

  

  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = ' General Journal Ledger ">
  < param name = 'Name' value = ' General Journal Ledger ">
  < param name = "Local" value = "GLOverviews\GLJournal_Overview.htm" >
  < / object >
  < ul >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'Preview' >
  < param name = 'Name' value = ' General Journal Ledger ">
  < param name = "Local" value = "GLOverviews\GLJournal_Overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = "fields" >
  < param name = 'Name' value = ' general ledger Journal - fields ">
  < param name = "Local" value = "GLFields\GLJournal_Fields.htm" >
  < / object >
  < /ul >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = "Big book" >
  < / object >
  < ul >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value 'cliché account registration' = >
  < param name = 'Name' value = 'Account snapshot to record Segments' >
  < param name = "Local" value = "GLConcepts\Account_Segments_Record_Layout.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'accounts adding groups' >
  < param name = 'Name' value = "add / change general groups of General ledger accounts" >
  < param name = "Local" value = "GLProcedures\Add_a_General_Ledger_Account_Group.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "adding accounts" >
  < param name = 'Name' value = "Add or change general ledger accounts" >
  < param name = "Local" value = "GLProcedures\Add_or_Change_a_General_Ledger_Account.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = 'chart of daily activities' >
  < param name = 'Name' value = ' General Scriptures daily activities Flowchart ">
  < param name = "Local" value = "GLFlowcharts\GL_Daily_Activities_Flowchart.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = ' data, limiting the export of ">
  < param name = "Name" value = "Limit the General Ledger data export by account number" >
  < param name = "Local" value = "GLProcedures\Limit_Export_of_General_Ledger_Data_by_Account_Number.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'delete accounts">
  < param name = 'Name' value = ' general ledger accounts remove ">
  < param name = "Local" value = "GLProcedures\Delete_General_Ledger_Accounts.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "export information" >
  < param name = 'Name' value = 'Export general accounting information' >
  < param name = "Local" value = "GLProcedures\Export_General_Ledger_Information.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'features' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "charts" >
  < param name = 'Name' value = "General Scriptures Maintenance Flowchart" >
  < param name = "Local" value = "GLFlowcharts\General_Ledger_Maintenance_Flowchart.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = "history, purge" >
  < param name = 'Name' value = ' General Purge history book ">
  < param name = "Local" value = "GLProcedures\Purge_General_Ledger_History.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "Import utilities" >
  < param name = 'Name' value = "General Ledger import Utilities" >
  < param name = "Local" value = "GLConcepts\General_Ledger_Import_Utilities.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "importing information" >
  < param name = 'Name' value = ' import General information book ">
  < param name = "Local" value = "GLProcedures\Import_General_Ledger_Information.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in the accounts payable' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration into accounts receivable' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in Advanced Consolidations' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in the cash management' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in the management of stocks' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in the management of currencies' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'integration in the Po' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'Preview' >
  < param name = 'Name' value = "General Ledger Overview" >
  < param name = "Local" value = "GLConcepts\accounts_receivable_overview.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "multicurrency reports" >
  < param name = 'Name' value = "Multicurrency Reports for great book" >
  < param name = "Local" value = "GLConcepts\Multicurrency_Reports_for_General_Ledger.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "chart at the end of period" >
  < param name = 'Name' value = ' General Scriptures period end Flowchart ">
  < param name = "Local" value = "GLFlowcharts\General_Ledger_Period_End_Flowchart.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'Registers' >
  < param name = "Name" value = "General accounting records" >
  < param name = "Local" value = "GLConcepts\General_Ledger_Registers.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'reprint transaction records' >
  < param name = 'Name' value = "Reprint of a general register of Transaction of the book" >
  < param name = "Local" value = "GLProcedures\Reprint_a_General_Ledger_Transaction_Register.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = "operations record layout" >
  < param name = 'Name' value = "General Scriptures Transactions Record Layout" >
  < param name = "Local" value = "GLConcepts\GL_Transactions_Record_Layout.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "use the reports as audit tools" >
  < param name = 'Name' value = 'Reports of General Accounting like audit tools' >
  < param name = "Local" value = "GLConcepts\General_Ledger_Reports_as_Auditing_Tools.htm" >
  < / object >
  < li > < by object type = ' text/plan of the site' >
  < param name = "Name" value = "Look at account information" >
  < param name = 'Name' value = 'View General Ledger account Information' >
  < param name = "Local" value = "GLProcedures\View_General_Ledger_Account_Information.htm" >
  < / object >
  < /ul >
  < li > < by object type = ' text/plan of the site' >
  < param name = 'Name' value = 'Future of the periods' >
  < param name = 'Name' value = 'Future of the periods' >
  < param name = "Local" value = "GLConcepts\Future_Periods.htm" >
  < / object >
  < /ul >
  < / html >

  Hmmm, weird.

  I would like to try a topic How to associate the keyword of the General Ledger. Compile again and see if anything changes.

  See you soon... Rick

  Useful and practical links

  Wish to RoboHelp form/Bug report form

  Begin to learn RoboHelp HTML 7, 8 or 9 in the day!

  Adobe Certified RoboHelp HTML Training

  SorcerStone blog

  RoboHelp EBooks

• links appears in the .chm file

  Hello
  I worked on a new project to help file. I have a problem on some of the generated pages (which contain hyperlinks) in the .chm files. I create the page help & hyperlinks. They work very well in test mode.
  When I generate the help, pages opens well, but the is no longer posting the links hyperlink (or work!).
  Specifically, they have lost to indicating them that they are a hyperlink & the color of the text is returned to being the normal 'black' for general text of underscore.
  Is this problem with the help of some files in this project a few days ago. I fixed it by recreating these pages and related links. However, since making it as much work, he appeared in another page.
  I read here that someone else had a similar problem and someone suggested, it may be the length of the text in the name of the link, but appears not to be the problem in my files...
  I'd rather not have to re - create pages each time to solve this problem, and without having to scroll through the entire project whenever I generate to make sure that the links did not file pages - so if anyone has any ideas why this happens, I would really appreciate hear you!
  I use RoboHelp x 5 on a machine running XP.
  
  I hope someone has some ideas...!
  
  Thank you
  Maxine
  

  Hi Rick,
  That's ok--there are probably reasons to doubt me - I'm quite rusty with RoboHelp, so chances are it's me!
  Yes, the topic is certainly... but if the full path name can perform, which would defnitely be a problem...

  the path to the link is:
  .. /.. /General_functionality/Printing_and_Exporting/Print_and_Export.htm

  & location of the complete project (down to the folder where the link does not is):
  My Documents\test APRE HELP FILES\APRE_Front_End_User_Guide_Files\APRE_screen_overview\APRE_screen_overview_menus

  But why it happens on this page help & not with links on other pages?

  I think you have solved it - I just tried to add a link to this topic to another topic in the same subfolder & it works great. I'll so rename these files & see how I hear.

  Thanks a lot for your help!

  concerning
  Maxine

• Titles of policies at the beginning of the .chm file

  I recompile a number of WinHelp 2000 projects in Microsoft HTML Help. Some of the .chm files that result are displaying the name of about 20 fonts on the homepage before the main text. It seems to me that some of the source files can have corruption (they are several years old and have been used with RoboHelp in its different forms for a few years now). Does anyone have an idea what is the cause and how to fix it?
  
  TIA
  
  David Anson

  Welcome to the forum.

  This same issue was published a few days ago. Look towards the bottom of the list, or watch clips on my site. It is covered there.

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• In RoboHelp 2015, are there changes with regard to the CHM files?

  I would like to know if there is a significant change for CHM files.

  The only option that I use for output is Microsoft HTML Help to generate CHM files. I can't use other (WebHelp and etc.).

  Well, I use the demo version of HR 2015 but I did not notice a significant change regarding the CHM files.

  The dynamic filter is not applied to it. I am currently using RoboHelp 9, so I ask you to these changes because I'm thinking that if it's worth changing HR 2015, because I use the output HTML, I only generate CHM files.

  I am trying to compare the two versions and I try to note their differences, but if you know some that it would be useful for me.

  Sorry if I make mistakes, because English is not my mother tongue. Thanks in advance!

  Hello, Camila

  Your English is very good! Yes, dynamic content filtering is only available with the latest reactive HTML5. Available for CHM output functions are mainly dictated by Microsoft because the format of HTML (.chm) help is their owner specification.

  RoboHelp has added a few things on top of the base CHM (skins for CHMS, glossary and browse sequences, etc.), but you won't find many features more modern in CHMS because Microsoft has continued to develop a long time ago.

  That said, while the CHM format may not have a lot of bells and whistles that you hope to, the new 2015 RoboHelp has many other advantages that make it easier create and justify an upgrade.

  Thank you

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• have 5 LR and CC. The folders are different, some are missing in the CC. And some complete are not available in CC. I'm looking forward to use CC rather than LR5 so how can I make the folders and collections even on each?

  have 5 LR and CC. The folders are different, some are missing in the CC. And some Collections are not available in CC. I'm looking forward to use CC rather than LR5 so how can I make the folders and collections even on each?

  Hi cjohnm,

  You can use the 5 Lightroom Catalog and improve it in Lightroom 6, therefor all folders and collections will be identical in both version.

  Open the Lightroom all holding the key Alt/Opt and select only the 5 Lightroom Catalog and it will switch to it.

  Let us know if that helps.

  Kind regards

  Mohit

• Whenever I have save my PSD, it automatically rasterizes all text layers within the entire file. Help

  I'm an Art Director who is very familiar with the following Adobe CC - but something strange happening that I can't understand. I'm working on a project that must constantly updated Web pages when providing info, etc. changes - so I need to make small alterations quick both imaging and copying. My big problem is everytime I save the PSD, it automatically rasterizes all text layers within the entire file. I have never experienced this problem before - and it's super super frustrating. Help

  Hi steffi_steff,

  Would suggest to reset the preferences of Photoshop to the default state and then try to save the PSD file.

  You can follow this link to reset the Photoshop preferences:

  Using Photoshop | Preferences

  Kind regards

  Claes

• When the path is missing from the Illustrator file, the problem occurs

  When the path is missing from the Illustrator file, it keeps duplicating well the path is absent from and cannot do anything else in the file

  Sorry about that - it happens to PSD files too. The solution is either to the back file where she there or, if you do not have the file, the set (of the same type) _any_ file in the old location renamed the old file name just if she continues to complain.

  Or, if you don't need the project, just leave Ch and delete project - it will create a new on the next launch.

  If you know in advance that you will be willing to delete the files to work on disk that are still referenced, you can avoid this problem by selecting the puppet in the project Panel, and unchecking the option "Auto-sync with the work" in the properties panel. Manual synchronization is then possible to check and uncheck this option.

  We have already fixed this bug here at the factory in Seattle, so it won't be a problem in Preview 2 and later versions.

• Error message when the chm file is opened and opening topics/links

  Hello

  I am a user of RoboHelp 10 and tried to generate HTML Help. When I try to open the chm file, you receive the following error message. When you click Yes or no to clear the error, it opens OK. The error message also appears WHEN you click a hyperlink in the project or open a topic.

  I use Windows 7 and have a computer laptop 64 bit.

  

  Of course as it seems!

• How to add the 'search' tab in the .chm file

  

  Hi all

  All of these days, I was using HR - 5 to create the .chm file. Today, I went to HR - 9. The chm file had the option to search automatically activated in HR - 5. But in RH - 9, glossary option only is available and I am not able to add the adjacent "Search" tab at the tab Index. Please refer to the screenshot for more details.

  Please help me solve this problem that the customer expect tab "Search" for sure.

  Kind regards

  Lata

  Hi Lata

  What show you in your image is a mismatch. The tab says glossary, but the content of the show search tab.

  I think that in this case I suggest you try to define a new window with the attributes you need. Then configure the default window for the page layout that you are using.

  You define the window by:

  1. ensure that Microsoft HTML Help is the default layout.

  2. click on display > pods > project implemented and you should see the windows there.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Cannot open the chm file

  Hello
  
  I found several threads on this site about containing error messages: mk:@MSITStore, but none of them seems to fit my situation.
  I worked in HR on a project, generated a new file chm a couple of times a day. No problem. Then suddenly after generating once, that I could not open the chm - no HR project, not in the folder, not in the copy of the (newly generated) chm on desktop.
  The message is: ' could not open the file: mk:@MSITStore:C:\Program Files\RoboHelp Office...\... \filename.chm.
  I reduced it here with a couple of records, but no, it's not very deep. I ' ts at the same level as my other projects, so it's not the problem.
  
  I can open the former chm files generated to other projects as before, so there's nothing wrong with the help function itself. I tried to remove the chm file, restart my pc, regenerating - but no result.
  
  I also tried the MJ Diagnostics and the only problem found was:
  HTML Help 1.x components workshop * HH not found or not installed correctly. Try to reinstall.
  But it seems that this 1.x is something very old and my installation has worked so far. Do I really need to reinstall something and exactly what and how? Is this a component HR or MS?
  
  Clues are welcome.
  Thank you
  Sara
  
  
  

  Hi John,.

  Thanks for trying to help out. It is now resolved. I should have written the solution here right now, but I was so happy that I could continue my work, so I forget.)

  What I did I looked at the diagram of the single source and I thought the size of the CHM file to optimize could pose a problem (a shot in the water - but you must try everthing). I deselected it and regenerated. Voila - it worked. With trembeling hands, I chose this new and refreshed - it still worked. Perhaps this change of the provision made to re-register correctly, restart from scratch. But I thought I had tried a similar thing before, when a new fact of layouts to see if they would work, and they do not have.

  Thus, it is resolved, but I don't really know what was bad and what was resolved.

  Sara
  

• Full text search does not work in the CHM file

  Hello, everyone.
  
  I use Robohelp for Word X5.0.1 and Office 2003 to create my CHM file. Full text search worked perfectly, but my boss has spent a day in my workstation installation tips and apparently it has changed some configurations, since then, the search finds nothing, he always comes up with "no topics found" even though I am looking for key words that are in at least one subject.
  
  I don't know if it's just a coincidence, or it y ' has a link, but also from the day, I do not hide you get hot spots to hide in the text of words. Thus, for example, an access point which appeared in Word as {bmc button.bmp}, now appears in the form: {bmc button.bmp} Topic_Name. I know in a normal project, we use the show/hide ¶ button in Word, but now, even when he's hiding from the brands of format, it still shows the name of subjects, rather than hide them as well.
  
  I would appreciate your comments in one of these problems, even if they are not related. Topic being displayed names are just annoying, but if there is not connection, the most important is the full-text search to work.
  
  Thanks in advance.
  Paulo.

  Just to register that I solved the problem.

  I tried to reinstall HR, but that did not work. I was about to give up when I noticed that an error was to come when I compiled the project: the infamous "HHC6003: the file itircl.dll has not been saved correctly. I found out that only fix you this problem by saving another dll: itcc.dll

  Once you solve this problem, the compilation is perfect and full-text search works properly again.

  Thanks for the interest.
  Paulo.

• New shortcut text missing in the right click option...

  Hello

  I have problem in windows 7 the new option of text document in the right click menu is missing...
  PLS HELP ME...

  Ensure that this key exists HKEY_CLASSES_ROOT\.txt\ShellNew\NullFile

  If it does not exist, create it. Just right click in the right pane of the C:\windows\shellnew key,
  and select New/String value, and then type: NullFile

• Cannot read the *.chm files

  Cannot read as *.chm files

  http://live.sysinternals.com/Autoruns.chm under W7 Pro x 64 - only right HLA says: URL retypethe or something like. Cannot get hh.exe to run a *.chm either.

  Addendum - FX, Chrome and IE8 (latest versions will not work, but the last opera works! How can I get other browsers to work?

  Take a look at this article.

  http://support.Microsoft.com/kb/917607

  Also right-click on .chm file and select Properties, then select unlock.

  Thank you very much... I can read .chm files...