Links Library dynamic Windows 7 Ordinal 1217 missing ASOHelper.dll

Similar Questions

• Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

  Download this message when I try to run Lightroom. The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library

  system: windows 7 64-bit

  There is no error in the log file.

  no error in scannow at the command prompt.

  

  Hi Michela,

  Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  -Record again with Windows AGKernel.dll: https://support.microsoft.com/en-us/kb/249873

  -Windows repair: https://support.microsoft.com/en-us/kb/929833

  -Install all the updates that are available for Windows: Windows Installer updates

  -Uninstall and reinstall Lightroom

  Kind regards

  Tanuj

• Windows and Nero reports missing atl100.dll 2015

  Is there some other way that restore Windows 7 Home Premium to fix programs report a Windows system file are missing. As with XP, you can put the installation disc in and repair. I programs telling me that "atl110.dll" is missing, I checked and it's there so I need to fix this problem without having to reinstall Windows.

  [Edit Moderator: changed the title of "File Missing", "Windows and Nero 2015 atl100.dll reports" missing]

  You're not going to tell us just what programs those maybe are you?

  If you found it, where did you find?

  Are these new programs that you installed recently?

  If these programs used to work, what do you think has changed since the last time they worked properly?

  The atl100.dll is part of Microsoft Visual Studio (ATL = Active Template Library) and developers of programs that code in C++ must have a matching version of the redistributable files (DLL = dynamic dynamic link libraries) installed on the system where their programs will run.

  The files are not part of a standard Windows installation so no amount of Mode safe, clean boot, system repair or sfc/scannow will help (sorry that Microsoft committed 'experts' Support Engineer).

  There are several versions of the redistributable C++ so according to what these programs are, you may have more than one version of the installed package.

  Given that you can't tell which version of various companies in Visual C++ can be used, it is possible (and likely) you're going to need different versions files library C++ Redistributable installed on your system at the same time, so if you look in your add/remove programs you can see several versions installed:

  

  You can check your add/remove programs to see what you have installed now.

  People often ask if they can uninstall older versions and the answer is "maybe" because nobody no but you know what other programs you have installed that could use libraries of these old versions and if uninstall you these programs will no longer work.

  This is probably a good idea to have at least the latest version installed so visit this page and get at least the 2015 version installed (which seems to be the most recent now):

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=48145

  Then on the next page, you will have to choose your version 32 or 64-bit Windows, download it, install it, restart your system and see what things look like.

  Depending on what program this is what complains about you will need to download another version and install it too then you will need to check with the company that wrote the program that complains and ask them what you need.

  When you have done, you should be able to see something like this:

  

• Windows Update, error of missing mscorjit.dll!

  Hello world

  Yesterday, I turned off my PC, installed Windows Update 18 updated.  Restarts in Windows, I had several identical mistakes, informing me that several of my startup programs (i.e., programs that load at startup) were: "could not load the compiler (mscorjit.dll) Jit: it may be missing or damaged."

  Well, I spent all day yesterday uninstallation and reinstallation of these programs, as well as .net Framework 4.5.1.  But I have nothing has been able to restore the missing dll file.

  Finally, today, I have restored my entire PC from a backup disk, and everything worked perfectly again - no error about a missing dll.  BUT THEN... Windows Update has installed the same 18 updates and here!, I get the same exact errors on a missing mscorjit.dll!

  Among the 18 updates, I find these on .NET Framework, although I have no idea if these specific edits are the problem:

  A security update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x 64 systems (KB2911501)

  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x 64 (KB2898855)

  A security update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x 64 systems (KB2898857)

  A security update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x 64 systems (KB2901112)

  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x 64 (KB2901110)

  And in a subsequent update, after the first 18 and after the dll mscorjit disappears:

  Microsoft .NET Framework 4.5.1 for Windows 7 x 64-based Systems (KB2858725

  Help!  Why Windows Update would steal my dear old mscorjit?  And what do I do from here?

  Thank you

  Jay

  Hello Jay,

  Welcome to the Microsoft Community Forum.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Repair of .NET framework tool

  http://blogs.msdn.com/b/astebner/archive/2012/10/12/10359320.aspx

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• Windows Search.exe error "missing uncdms.dll" Windows 7

  I spent the better part of 12 hours today trying everything to get rid of this error message - including purchases and execution of two different registry cleaners. I tried to turn it off in Control Panel and then restart and turning back, as suggested in this forum. I even completely reinstalled Windows 7, who came back to defeat a group of earlier work. Nothing works - it's still there every time to reboot.

  Tried to manually install the online source .dll file - it wouldn't take it.

  I have a computer customized brand new with Windows 7 as an original clean install. He did not, until I migrated the files and the settings to my XP machine. I have subsequently removed all programs possible and which comes from the old computer (which, BTW, worked great) - all that's left are my photos and document files. I bought the computer and Windows 7, more precisely to upgrade my Adobe CS5 programs.

  I have another computer with Vista, which I did not like much at first, but it only took a few hours to beat him into submission, and we've been friends since. So far Windows 7 is a nightmare. (Enough to make me run screaming on the Mac.)

  In addition, he continues to move my desktop icons around regardsless the display settings (line up on the grid and auto align) be deselected. Grrr!

  I might have a Windows 7 installation disc buggy? Others have these problems? There, can anyone help?

  Dianne

  By selecting Start, control PaneWindowsl, programs and features, Windows features and uncheck Windows Search, I suspect that will stop the error. In earlier versions of Windows, Windows Desktop Search (now called Search) is a stand-alone program. With Windows 7, it became a turn on / turn off the function of the operating system. My feeling is that it changes the way your problem is solved.

  I would try to run the System File Checker.

  http://support.Microsoft.com/kb/929833

  Hope this helps, Gerry Cornell

• The 459 ordinal not found in dynamic link library

  I have windows 7 64 bit and suddenly begins to show the 459 ordinal could not be located in the urlmon.dll, whenever links Library dynamic that I try to open any program, so that I can do to fix this?

  Worked for me also!  Thank you!

  This is a security update, so I guess he plays a bit with access privileges, denying them access to things like dll files under certain circumstances

• "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

  I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

  I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

  I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

  "Method 1:

  To resolve this problem in Internet Explorer, follow these steps:

  a. Quit all programs that are running.

  b. Click Start and then click Run.

  c. type regsvr32 urlmon.dll, and then click OK.

  d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

  ('DllRegisterServer in urlmon.dll' received successful)

  If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

  ·         Shdocvw.dll (failed)

  ·         Actxprxy.dll (failed)

  ·         Oleaut32.dll (failed)

  ·         Mshtml.dll (received no response)

  ·         Browseui.dll (failed)

  ·         Shell32.dll (managed)

  Method (step 2):

  I suggest you to start in safe mode and test the question.

  Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Method (step 3):

  I suggest you perform a SFC Scan and check if it helps.

  The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

  (SFC Scan completed successfully)

  Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

  DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

  http://1drv.Ms/11PQ3dm

  I hope this will help you to find me a solution to my problem.

  First of all lets run a startup repair.

  This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

  After return from the logs generated.

  Startup Repair

  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

  In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

  Select the Startup Repair tool.

  Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

  To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

  Select command prompt.

  Type

  type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

   

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

• the 318 ordinal could not be located in the dynamic link library iertutil.dll

  When you try to run programs system says 'the 318 ordinal not found in the dynamic link library iertutil.dll ".

  Hello

  1. When exactly do you get this error message?
  2. What is the accurate and complete error message?
  3. Remember to make changes to the computer recently?
  Method 1: Checking the file system (CFS):
  
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929833
  
  Method 2: Check the issue in Cleanboot.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article...
  I hope this helps.

• McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.

  McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
  Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please

  [Moved from comments]

  Hey Carol,.

  It would help if you could answer these questions.

  -What version of Windows is installed on the computer?
  -What antivirus software do you have on the computer?
  -When you get this error? It is when the computer starts for the first time?

  Here are a few troubleshooting steps that you can try to get the matter sorted.

  First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is

  used by Mcafee and could be the reason for the error.
  Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.

  If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner

  Make sure that the computer is virus-free.

  Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

  Note: the steps mentioned in the link applies to Windows vista and Windows 7.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Let us know the results.

• Ordinal 423 could not be located in the dynamic link library urlmon.dll

  After the download of Internet Explorer 8 and computer restart, I get the error message that the ordinal 423 could not be located in the dynamic link library urlmon.dll. I have nothing, no start menu, icons whatever it is. even when you start in safe mode. Please help me solve this problem

  Thank you

  After the download of Internet Explorer 8 and computer restart, I get the error message that the ordinal 423 could not be located in the dynamic link library urlmon.dll. I have nothing, no start menu, icons whatever it is. even when you start in safe mode. Please help me solve this problem

  Thank you

  You can either try the system restore before installing corrupt of IE8 has taken place or you can try to copy / to register theurlmon.dll in doing so:

  Click the Windows key + R key on your keyboard to open the command run and type:

  regsvr32 urlmon.dll click [Ok ] or press [Enter ] on your keyboard. Reboot and see if you can see the desktop.

  If you have still questions try clicking on the Windows of your keyboard key and open the start menu, click onall programs > Accessories > system tools > System Restore.

  How to reinstall or repair Internet Explorer in Windows Vista and Windows XP
  http://support.Microsoft.com/kb/318378/

  How to uninstall or remove Internet Explorer 8?
  http://support.Microsoft.com/kb/957700/en-us

  How to solve Internet Explorer 8 installation problems
  http://support.Microsoft.com/kb/949220/en-us
  How to solve Internet Explorer 8 installation problems
  http://support.Microsoft.com/kb/949220/en-us

  How to install Internet Explorer 8
  http://support.Microsoft.com/kb/970310/en-us

  Let us know your progress or if you need more help.

  NASS - http://www.nasstec.co.uk

• "450 ordinal is not found in the dynamic link library urlmonn.dll" or something. What does that mean?

  I downloaded and installed the windows 7 transformation pack and then when I removed it a few months later he repeated this message whenever I started a program.

  . DLL or Dynamic Link Library files are collections of routines or function that are accessible and used by one or more programs as needed. The Ordinal Point is an entry point or address where a program can expect to find a specific routine or function. Different versions of a. DLL can have different collections of routines that is held inside and as such, addresses can vary.

  It would seem that the "transformation pack" has another (e.g. updated...?) version of the urlmon.dll file and 'remove' the transformation pack made the remaniing version on your XP with problems.

  You could try the reinstatement of the existing urlmon.dll. Tap on the Windows key + R or click on Start, run - paste or type in the following in the text Open run dialog box.

  regsvr32 urlmon.dll

  ... and click OK. If this does not resolve your problem, you can also try a full System File Check. Tap on the Windows key + R or click on Start, run - paste or type in the following in the text Open run dialog box.

  cmd

  ... and click OK. At the opening of the command window, type the following,

  sfc/scannow

  ..., and then tap on . The process will take a few minutes depending on the speed of your computer. This process' Scans integrity of system protected all files and repairs files with problems when possible ".

  Please note that you mentioned a urlmonn.dll. I'm not familiar with this specific. DLL and have provided guidance for the reinstatement of the urlmon.dll instead. If the stray file is indeed urlmonn.dll please adjust the instructions accordingly.

• the 344 ordinal could not be located in the dynamic link library comctl32.dll

  It is with windows XP give it this message and also my wireless does not work.

  I don't know how to solve.

  Hello AliSyaerGizabi,

  As Jose pointed out in the thread above, all information of additional system, you can provide would be beneficial.  What is the make and model of your computer, and the system specifications?   Also, when you receive the above error?

  If you do not have a Dell PC, please visit the link below.  Did you do updates recently regarding your wireless network software?

  Dell forums:

  344 ordinal is not found in the COMCTL32.dll dynamic link library

  http://en.community.Dell.com/support-forums/virus-spyware/f/3522/p/19247943/19393689.aspx#19393689

• When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library.

  When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library.  Any ideas on how to solve this problem.  Have Windows Vista.  Thank you.

  original title: problem opening Adobe pdf.

  Hi Gary,.

  Are you facing this issue only when you open pdf files?

  Method 1:

  You can try uninstalling and reinstalling Adobe software and check if it helps.

  Uninstall a program

  Method 2:

  You also try to run the system restore.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following links:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• The 12404 ordinal not found in the dynamic link library mfc90u.dll.

  I get this error when trying to open Samsung Kies 3 after the new facility:

  The 12404 ordinal not found in the dynamic link library mfc90u.dll.

  This error is almost identical to the one posted here, but that the error was to 7426 ordinal and is since a couple of years.  However, I tried the recommended fix (install Visual C++ 2008 SP1) that obviously works for MANY people, but this does not change my problem.

  I have re-installed and rebooted several times, and I searched my system for the dll specified could not be found:

  -C:\Windows\winsxs\amd64_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_044aad0bab1eb146 (date: 25/07/2014;) Size: 4.86 MB)

  -C:\Windows\winsxs\x86_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.21022.8_none_b81d038aaf540e86 (date: 05/09/2014;) Size: 1.10 mb)

  -C:\Program Files (x 86) \Samsung\Kies3\FirmwareUpdate (Date: 07/05/2014;) Size: 3.60 MB)

  -C:\Program Files (x 86) \Samsung\Kies3 (Date: 07/05/2014;) Size: 3.60 MB)

  The first two files seem to be temporary files (dated 9/5 can come from the current installation of Visual C++).  The last two I know come with Kies 3 installation - I searched the dll both before and after the reinstallation of the product.

  If Kies 3 cannot locate the dll file in the dynamic link library, perhaps I can copy the dll in that location?  If so, where is this place?

  Other thoughts on how to fix this?

  Windows: Windows 7 Enterprise Edition, Service Pack 1

  Kies 3 Installer: Version 3.2.14083.9

  I get this error when trying to open Samsung Kies 3 after the new facility:

  The 12404 ordinal not found in the dynamic link library mfc90u.dll.

  This error is almost identical to the one posted here, but that the error was to 7426 ordinal and is since a couple of years.  However, I tried the recommended fix (install Visual C++ 2008 SP1) that obviously works for MANY people, but this does not change my problem.

  I have re-installed and rebooted several times, and I searched my system for the dll specified could not be found:

  -C:\Windows\winsxs\amd64_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_044aad0bab1eb146 (date: 25/07/2014;) Size: 4.86 MB)

  -C:\Windows\winsxs\x86_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.21022.8_none_b81d038aaf540e86 (date: 05/09/2014;) Size: 1.10 mb)

  -C:\Program Files (x 86) \Samsung\Kies3\FirmwareUpdate (Date: 07/05/2014;) Size: 3.60 MB)

  -C:\Program Files (x 86) \Samsung\Kies3 (Date: 07/05/2014;) Size: 3.60 MB)

  The first two files seem to be temporary files (dated 9/5 can come from the current installation of Visual C++).  The last two I know come with Kies 3 installation - I searched the dll both before and after the reinstallation of the product.

  If Kies 3 cannot locate the dll file in the dynamic link library, perhaps I can copy the dll in that location?  If so, where is this place?

  Other thoughts on how to fix this?

  Windows: Windows 7 Enterprise Edition, Service Pack 1

  Kies 3 Installer: Version 3.2.14083.9

  Installation under pakage will solve the problem

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=d5692ce4-Adad-4000-abfe-64628a267ef0&displaylang=en

• the 6848 ordinal is not found in the dynamic link library mfc90u.dll

  Hello

  (I hope) a brief history of my problem:

  I am running Windows 7 Professional (64 bit) on a VM (VirtualBox software) on my computer of Linux Mint.  I tried to run a program called Filemaker Pro Runtime, (name of original file FMPROR. EXE.  First of all, I get the error "the side to side configuration is incorrect" and after a few hours of internet browsing, checking the logs etc, I found that I had to install Visual C++ Runtime (x 86, 2008 version) that I found and installed.  Only concern was the page I have d/led (which was a Microsoft page) does not mention Win 7 system requirements - I have tried to find a version for Win7, but a search increase no relevant results.  So I installed the version I found, by Windows XP, Win Server and Vista (I think it may have been an old page).  This seemed to fix the side-by-side configuration error, but now I get the error:

  the 6848 ordinal is not found in the dynamic link library mfc90u.dll

  I tried a search on the web using the above string, but the closest results, mentioning only a .dll ordinal and various different seemed not really relevant.

  I would be very grateful if someone could help me find the required information fix it, score at least me to a Web page that will help me to understand.  I'm not a geek, but I'm pretty OK with research and implementation of aid on the web, but this time, I'm confused as to how to proceed.

  Thank you very much in advance for any help received

  See you soon

  Ricky Walker

  Hello

  Version of Windows 7

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=5555

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26368

  See if that helps.