Linksys EA6400 speed problems

Similar Questions

• Linksys EA6400 slow speeds

  Hello

  I have a Linksys EA6400, and lately I've been making autour 13Mbps via my router speeds. Just as I was going to guess it was my ISP and to call them, I decided to connect my pc directly to the modem. When I connect directly to my modem I got speeds around 65Mbps.

  Having found that the ISP was not at fault, I press reset on the back of the router, re-tested the speed and got nothing else. So I power cycling it, same speed. Today, I was going to be gone all day so I unplugged the router to see if a long shutdown would help, but after 12 hours to be disconnected, still nothing. Until 2 weeks ago, he works very well with no hicups.

  Can anyone offer any help to solve this problem? New firmware? I can't find a link to the firmware update anywhere in the configuration of the router to try it...

  Thank you to anyone who is able to offer their help.

  The firmware update:

  http://downloads.Linksys.com/downloads/firmware/FW_EA6400_1.1.40.160989_prod.img

  Reset to factory settings after the firmware upgrade.

  If no improvement:

  Try:

  • Connectivity-online Administration-Online cutting in the middle of transmission => uncheck
  • If IPv6 is not required by your ISP; => Connectivity-online Internet-online-online Edit IPv6 settings uncheck enable
  • Prioritization of media => Enable-Online Check
  • Prioritization of media-online settings and apply just downstream and if available upstream values; Initially to keep all devices and applications priority normal
  • If you have problems with throughput in Wifi try support WMM disabled; If no difference is noticed reactivate WMM

• any ideas? ~ macbook pro (13-inch mid 2009) speed problem & sound a1278 ~ el capitan 10.11.5 (15F34)

  any ideas? ~ macbook pro (13-inch mid 2009) speed problem & sound a1278 ~ el capitan 10.11.5 (15F34)

  
  

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-25 16:47:10

  Download EtreCheck from https://etrecheck.com

  Time 02:21

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Verify the signatures of Apple: enabled

  
  

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 5

  1 CPU 2.53 GHz Intel Core 2 Duo: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 7

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  SAMSUNG SSD 840 EVO 250 GB disk0: (250,06 GB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  a /Volumes (disk0s2) / has: 50,00 (GB 49,84 free)

  b (disk0s3) /: 199,07 go-go (160,81 free)

  Recovery HD (disk0s4) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS23N)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Card reader Apple

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Configuration files: ⓘ

  / etc/sudoers, 1242 but file size expected 2299

  Protection of the integrity of system status: disabled

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / System/Library/Extensions

  [no charge] com.native - instruments.driver.NIUSBDeviceHelper (1.0.8 (R32) - 2016-06-25) [Support]

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 165 tasks Apple

  [operation] 66 tasks Apple

  Launch system demons: ⓘ

  [loaded] 47 tasks Apple

  [loading] 164 tasks Apple

  [operation] 79 tasks Apple

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-06-14) [Support]

  [loading] com.malwarebytes.HelperTool.plist (2016-06-25) [Support]

  User launch officers: ⓘ

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist (2016-06-23) -/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert: Executable not found!

  [loading] com.google.keystone.agent.plist (2016-06-23) [Support]

  Items in user login: ⓘ

  gfxCardStatus Application (~ / Downloads/gfxCardStatus.app)

  Hidden Google Chrome application (/ Applications/Google Chrome.app)

  NIHardwareAgent Application hidden (/ Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)

  Other applications: ⓘ

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000002.Google Chrome

  [ongoing] com.eidac.smcFanControl2.54432

  [ongoing] com.etresoft.EtreCheck.6112

  com.google.Chrome.47072 [loading]

  com.native-[ongoing] instruments.NIHardwareService.54752

  [loading] 411 tasks Apple

  [operation] 176 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-23) [Support]

  QuickTime Plugin: 7.7.3 (2016-06-25)

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-23) [Support]

  JavaAppletPlugin: 15.0.1 - 10.11 (2016-06-23) check the version of the SDK

  Default browser: 601 - SDK 10.11 (2016-06-25)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-14) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  28% by mail

  11% WindowServer

  6% kernel_task

  2% hidd

  1% fontd

  Top of page process of memory: ⓘ

  1.65 GB Google Chrome Helper (13)

  563 MB kernel_task

  Mdworker (19) 360 MB

  221 MB Google Chrome

  Com.apple.WebKit.WebContent (2) 131 MB

  Virtual memory information: ⓘ

  3.77 GB of free RAM

  used 4.48 GB RAM (2,40 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  25 June 2016, 16:18:23 self test - passed

  24 June 2016, 18:55:37 ~/Library/Logs/DiagnosticReports/WebProcess_2016-06-24-185537_[redacted].crash

  com.apple.WebProcess - /System/Library/PrivateFrameworks/WebKit2.framework/WebProcess.app/Contents/Mac OS/process Web

  MacBook Pro, average vintage thrash?

  Your hard drive may be faulty, run disk utility > first aid your recovery volume or another hard drive under OS X on it and let us know what he reports.

  https://support.Apple.com/en-us/HT201639

  Edit: you 2009 isn't a recovery, run it from your installation CD original or other dislk with OS X on it.

• Satellite A80 129 DVD-RAM write speed problem

  Hi all!

  I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

  When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

  Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

  I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

  Thanks for your replies.

  BR, Kekec

  You should try to update nero, it might solve the problem.

  Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

• Linksys N900 EA4500 speed problem

  Hi guys,.

  I recently updated my ISP one up to 55 Mbps service (new modem - cisco DPC3008). I did some speed tests and what goes directly from modem pc my reaced 57.27 speed down and 10.72 upward.

  When you browse the EA4500 router I can get 10.50 down and 3.73 upward. I read through a few recent discussions to go to the router configuration and

  -Prioritation media-settings-the downstream bandwidth is fixed at 10945 kbit/s.

  I tried to change to 55000 since I'm now up to 55 Mbps. In addition to the support WMM is defined on IT. I checked to see if the router is in need of an update of the firmware and the unit shows the firmware is uo to date. As soon as I leave the screen and return only the bandwidth is changed to 10945.

  Does anyone have an idea on how to get the router to Max which will result in the modem?

  Thank you. Bruno

  Thanks to FurryNutz. Problem solved

• WRT1900AC with internet speed problems

  So I've recently updated my 30mbps to 180mbps Comcast internet. We decided to get new hardware to support this faster speed that our 'old' was quite old. The old router is a Linksys E2000, not terribly old, but does support up to 300 Mbps. Our upgrade includes the WRT1900AC and a modem Arris Surfboard SB6183, both purchased about 3 months ago.

  Now here's my number: At the time when we thought that the new internet, router and modem seemed quick and we really didn't actually check our speeds are after you configure the settings. After about a month I started noticing the buffering in the videos and on the websites of loading time slower. I decided to perform a speed test on speedtest.net and found that the speed was down to what she was before us all, upgraded 30mbps... This is certainly not what I pay for...

  A crossed wireless settings to try various channels rather than just auto and got one that seems to work. Channel 11-2, 462 GHz on the 2.4 GHz network and channel 157 - 5.785 GHz on 5 Ghz. prioritization of media network also tried lit after reading that would solve the problem. He did it! I was getting around 150mbps down, so it was a big improvement. Awesome its fixed!

  I ignore the case for a few weeks, but later concluded that the internet was down to 35mbps. This confused me because I did not change settings either. I do more research and find how to configure bandwidth downstream under MP settings. He seemed to be attached to all about 30mbps so I upped it to 200 Mbit / s. save the settings, restart the router just to be sure and do a speed test. Nothing has changed. Always get a slower speed to about 35mbps down and 12 upwards.

  

  I tried everything I found on the internet with no results. To reset the router to factory settings to change the channel under network settings for each network. Still nothing. It fluctuated between 20-35mbps down with the settings I've adjusted and does not exceed 35. I don't know if there is a hidden buffer, I should be searching or if it's something else.

  If I'm missing any info in this I'm going to try my best to fill it.

  Any help is appreciated!

  Thank you

  Matthew

  Your bandwidth downstream MP must be set to 184320. Active WMM.

  To ensure that the issue is not the modem or ISP connect a computer directly to the ISP modem and run the speed test. Keep in mind that on your network the user could also heavily use the Internet causing the performance problem.

• Connection speed problems - black WUSB54GC usb adapter

  Hello everyone,

  This is my first post here!

  I googled nothing helped, and so I thought I would record with the Linksys forum and see if maybe I can solve this problem that others may have as well.

  I recently installed black WUSB54GC usb wireless adapter on my desktop PC, windows XP (now updated with service packs, etc.)

  The adapter receives the complete signal (very good - excellent, 54 Mbps), but it seems that my download speeds are capped with this adapter. Web pages same way load more slowly. I can place the macbook from my girlfriend directly next to my office, connected to exactly the same wireless network, and its download speed, browser speed and speed test results are always twice as me (any site speed test I use or what file I download).

  When I do a speed test, almost seems as if the speedometer needles few want to continue, but they just 'bounce', as they are hitting some kind of ceiling.

  When downloading files, the macbook on average 500 to 800 Kbps, while the adapter WUSB54GC hangs out at approximately 90 kbps.

  I have read in this forum and have adjusted my router Linksys WRT54G wireless suggested as follows:

  -Set the channel 11-2 wireless, 462 GHz

  -Change the interval of tag to 75

  -Change the Fragmentation threshold to 2304

  -Change the RTS threshold to 2304

  In addition, my connection speed is even slower, regardless if I have the settings TCP/IP (under the Wi - Fi connection properties) set manual (static ip) or automatically.

  Any help would be greatly appreciated, as I would like to be able to get this thing working properly, knowing that my router is pumping a lot more than this adapter is letting me use.

  Thank you!

  Well, I think I solved the problem.

  Seems that in some ports USB on my motherboard (Asus P5B) do not allow to run at full speed wireless USB adapter. I had used in the rear ports on my computer... but the passage for the first ports (that came with the case - Thermaltake Armor) seems to have solved the problem. However, as I believe that all of the USB ports I have is strange Hi-speed USB 2.0 and strange that those outside that came with the case and will connect to the pins on the motherboard works better than those actually built. Huh.

  Wouldn't be something to do with the drivers for the WUSB54GC, or is this a problem with USB port drivers?

  In any case, I'm sorry if this sounds like a useless thread now, but maybe this someone solve other problems too.

  See you soon!

• Satellite P70 - A - 07 T 040 - connection to LInksys 1900AC speed

  The specification for the P70 - A indicates a transmission speed of 300bps. Have you tried some drivers, but cannot raise the speed of 144 bps to 300bps, although an old PC on our network is automatically adjusted to 300bps when the Linksys has been implemented.

  Is there a specific Toshiba driver for this?

  > Lists of the specification for the P70 - has a transmission speed of 300bps

  You mean the wireless network and WiFi card?

  First of all various satellite P70 - A portable models support different hardware specifications. This means that the different WLan modules were built in the notebooks.

  It s I knew not which module Wlan has integrated this unit but its not very difficult to verify. You will find Wlan card details in the Device Manager.

  Second, most of the modules supports various standards Wi - Fi 802.11 B/G/N
  Each standard supports different connection speed.

  802 11 B 2.4 Ghz supports 1-11Mbit/s
  802.11 G 2.4 Ghz supports 6-54 Mbps
  802.11 N 2.4 Ghz or 5 GHz supports 72-600Mbit/s

  But beware: all these values are raw values!

  You should first check out what Wlan standard is used by the Wlan module.
  This can be checked in the Device Manager-> card Wlan-> properties-> Advanced tab.

  I guess that its already set to 802.11 N standard because you've reached 144Mbit/s
  So in this case you should also read this Wikipedia article on the 802.11 standards of N:
  http://en.Wikipedia.org/wiki/IEEE_802.11

  802.11n supports two wide channels: 20 MHz and 40 MHz.
  20 MHz supports 144.4 Mbit/s
  40 MHz supports 300 Mbps

• Low-speed satellite Pro U400-142 - Wireless-N speed problems-

  Hi guys...

  I ve just bought a laptop Toshiba Satellite Pro U400-142...
  I have a belkin N1 Wireless cable router...
  I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

  I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
  Why show a low speed?

  I m in the same room as the wireless router if the signal is excellent...
  I've tweaked on with the settings in the network adapter settings...
  I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

  Can someone tell me what is the problem?
  I need to change some settings on my N1 router or what?
  This was one of the main reasons why I bought this laptop.

  concerning

  You have reason seems the wireless network adapter supports the Draft N
  But are you sure that you are using Draft N?

  Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

  At 802.11 N selected in your router settings?
  Update you the BIOS and WLan card driver?

• Speed problems according to the channel in which I connect - Possible hardware problem:

  Hello

  I bought a R8000 about 1 month, and it worked pretty well. Last week, I read a review on the router suggested what a turn on the Smart Connect. That's when the problems started.

  -Panda USB wireless that worked perfectly started to have speeds of 1.5 Mbps when my service is Comcast 150MBps explosion. Before turning on the S.C., it reaches that speed easily.

  -After the filming of Smart Connect, did not improve the performance of the USB dongle. It is remained at 1.5 Mbps to 3MBPs. I tried to fix it for a week now.

  -J' I reset the modem (button reset button for 10 seconds), configured my router again and added to my dongle is malfunctioning, the router started having trouble to detect my external WD "My passport".

  Today, troubleshooting the wireless dongle with Panda, I changed the channel 5 GHz at the elementary school and the speed is back to 170 Mbps. The router is kept at approximately 3 M from the computer without any obstacles between them.

  Finally, the streaming of my router (with cable) to my TV using DLNA sometimes stutters. yesterday, she even caused the TV to not recognize the transmitted file.

  Can you help me troubleshoot the router more far to find if it is defective?

  Thank you

  As I started the topic, I would give it a closure. My problem was that I had a USB Wireless Dongle of Panda, who performed in the secondary channel (high way) but ridiculously low in the primary (Channel Low). As I had Smart Connect lit, I couldn't control my connected computer channel and appeared the problem was with the router.

  That said, I noticed a better balance between devices when I disabled the dynamic QoS option. I don't know if the algorithm for dynamic QoS is simply wrong or its implementation by the current firmware (V1.0.3.4_1.1.2) is buggy.

  In any case, currently, everything works with me. Explosion of Comcast 150Mbps and rapid tests is between 157 to 153Mbps in tests using a channel 5 G.

• DVD-RAM UJ-820 s: speed problems

  Just wondering if someone has managed to solve the problem with UJ-820 s, i.e. the speed not how it should be for the writing/extraction. I had to use using a USB to get anything above 2 x when the specs say that it should go to 4 x - false advertising?

  I guess the drive need a firmware update, but it doesn't seem to be an easy way to contact Toshiba to get one!

  See you soon

  Dave

  [Edited by: admin]

  Hello

  What you mean exactly with speed not how it should be for writing/ripping? You can burn DVD - R with a X 4 speed?

• Sorting the rows in the table based on the first character - speed-problem

  Hello

  I have a text file with a lot of lines. The file is imported into LV, and must be sorted by the first character.

  It works very well, but gets very slow lines if too.

  If 40,000 lines then take 0. 2 s.

  If 400,000 lines then the time rises with factor 100 in 25 years.

  If 1,000,000 lines then the weather is dry 222 (~ 4 min)

  Attached is the code which sorts a table to text.

  The number of lines can be set with the meter of the loop (Loop-counter * 4 = NumberOfLines)

  The elapsed time is displayed.

  How to speed this up? (Or check the more linear time number of rows)

  Thank you

  

  You can try something like that. If you treat a table line by line, you end up taking a lot of time.

  

  Sorry I have a problem of fixing of the VI.

• Acquisition speed problem - cDAQ9188XT

  Hello

  I need your help because I have a slow acquisition problem in my project that I don't know how to solve.
  Basically, I realized that my program was not run fast enough and I found that it was because of my acquisition of dig vi.
  Acquisition rate / loop is limited to 772-773ms for each iteration, while I could at least 100ms.

  In order to reduce to a minimum the other task to do here is what I did:
  
  and what I get:

  

  For the results 2305.63... I had plugged nothing but values with wire are good, the problem is not there.

  I'm still very novice with DAQmx tasks (I wanted to learn to do without the DAQ Assistant, which itself puts ms 2800 loop...) so there may be some errors, but I don't know where...

  I acquire the temperature only a NI 9213 module that shouldn't have problems to keep! And I request a sample on request. (Clocked in the future by a loop of 100 ms between each iteration).

  To create the 'task' refnum, I converted my old DAQ assist in a task! Maybe it's here-> 2.0 assistant DAQ in the project
  I have also changed my computer, I get exactly the same result, so the problem comes from my code / configuration...

  The project is not executable because it took me a while loop in the sub acquisition.vi vi to identify the problem.

  The vi test is called test - speed.vi and the task refnum: assistant DAQ 2.0, be sure to select on the Panel before printing, although I doubt that without the same DAQ - module, execution starts ^^

  In addition, as a substitute in the whole project, the acquisition by simulation, it works almost perfectly!

  I hope that I was pretty, as usual, do not hesitate to tell me if I should explain more clearly!

  I can not find a solution at this time, do you have any idea?

  Thank you very much!

  Erwan

  PS: do not hesitate to criticize the bad things that you see in my project as a whole, if you see something really bad!

  PS2: I see just with a SINGLE temperature on the nor 9213 my loop is 163ms...
  

  Look at the specifications on page 6.  The 9213 has 2 modes, high resolution and high speed.  It also has an auto zero option.

  http://www.NI.com/PDF/manuals/374916a_02.PDF

  When you configure the task must be a device tab that has the auto zero and adc synchronization mode.  Change the synchronization in high speed mode and the auto zero times or none and see if that speeds up things for you.  But there is a take-off with precision.

  14 playback channels I received about a time of 300 ms iteration by using a task DAQmx.  I found that with the help of the 9188 some modules are not as fast as I would like.  You can run your thermocouples in a separate loop and transmit data to your main vi when it is available.

• Power PC speed problem

  Hello, Laurie here. help my friend, Amy, with her computer. A few moments ago I noticed this suspicious 'PC power speed' icon to the search. You follow me? I assume that you are familiar with this one right? OK, so meet the standard as the first step on how to manually uninstall this thing all begin with the Manager tasks and ending the process, right? This is where the problem is, the ctrl alt del function will not bring the upward Task Manager, (probably all part of Funpack of Virus PC power speed!) (Im kidding!) In any case, I think that the key elements to get rid of the "power of PC system" are in the registry anyway, but I am not sure. Any Suggestions? Please, I beg you.

  Hello

  I recommend restarting the system in safe mode and see if you can remove it from there. You should be able to go in Control Panel to add/remove programs and remove it.

  I would also like to run Super anti-spyware, you can download it from the link below.

  http://www.SUPERAntiSpyware.com/

  Just download one and do a full scan.

  I hope this helps.

  Jim

• Valet parking more speed problem

  I recently installed a new Valet Plus and noticed much more slow navigation and then from my old D - Link DIR-655 router.  I ran speedtest.net and noted my speed died in 15 Mbit/s of my usual 30 Mbit/s.  After many trials, I discovered that the router option "" safe surfing"was the culprit.  I did a 'chat' with a CISCO technology session and ran a lot more tests.  There is no other explanation, then the safe surfing must do some filtering it slows down.  If anyone else has noticed this?  This seems to be a significant problem for CISCO.

  Wrong forum. This is the forum you're looking for.