Satellite A80 129 DVD-RAM write speed problem

Hi all!

I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

Thanks for your replies.

BR, Kekec

You should try to update nero, it might solve the problem.

Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

Tags: Toshiba

Similar Questions

  • Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

    MODEL: SA80-129
    DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
    SYSTEM: WINXP
    SOFTWARE: NERO

    (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
    (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

    all PROMTLY ANSWER would BE MUCH APPRECIATED.

    It doesn't sound good.
    I had a similar problem of combustion and the end of the story, I replaced the drive ;(
    However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
    Then you could check if it able to burn the DVD s s.
    I think you should also try burning different DVD media.

    I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
    This could be a worst case and in this case, the replacement is necessary.

  • Problem of its satellite A80 129

    I bought the laptop Satellite A80-129 a few days ago. I decided to install Win XP Prof instead of Win XP Home, which came with the laptop. After installing all kinds of software, I noticed something weird. His knowledge was quite low.

    I checked all kinds of possible parameters of volume everywhere and it is set to max everywhere possible. Also, I checked the volume on the laptop dial and it is also turned to MAX I installed WM Player 10, RealPlayer, Quicktime and Winamp 5.08.

    After playing some of my music, I came across something interesting. While I was playing my music in Winamp, I also played a small video file in WM Player 10 and that's sound was really loud. Immediately I looked at which audio codec is used in this video and this is WMA 9 (64 kbit/s, 48 kHz stereo, (A / V) 1-pass CBR). When I stop the playback of this video, sound volume decreases again.

    I also tried sound in other software such as RealPlayer and Quicktime, and only after I read this audio video gets really strong in all players. Any suggestions?

    I would point out also that no matter if I play music (mp3, wav, audio CD..) or video (avi, mpeg, rm,...), audio is still low. Only after that I have play this specific video, the sound becomes strong to all players, playing music or video.

    I also have problems with energy saver. If I install it, everything I write in the world is so slow, it appears letter-by-letter although I already wrote the entire sentence. If I uninstall, then everything is back to normal. Why is this happening?

    I would really appreciate a response.

    Best regards, Kekec

    Hi Kekec

    It's very strange because that all tools & utilities should work fine using Windows XP Home and Professional. Have you had all of these problems at the beginning with OS preinstalled by Toshiba? The original operating system provided by Toshiba included SP2. Have you installed it too?

  • Module Bluetooth for Satellite A80 129

    Hi all!

    Is it possible to upgrade my satellite A80-129 with a BT module or it is not possible at all?

    And if possible, what then is the right one for my laptop?

    BR, Kekec

    Hi kekec

    I found information that Bluetooth for A80 is not available. This means that there is no possibility of upgrade. In this case, the best advice is USB Bluetooth stick.

  • Where can I find repair for Satellite A80 129?

    I want to find the service manual for the model satellite a80 129 because my screen is a little loosy.

    Hello

    In general, manual service Toshiba is not available for end users. Maybe you can find help on the net, but if you n t with experience, it will be best to contact a qualified staff in some laptop repair center.

  • Satellite A80 129 No. wirless and Bluetooth internet

    Hi guys,.

    I have a laptop Toshiba I formatted yesterday is Satellite A80-129.
    After some googling I found the way to get the drivers for it, but those driver links two do not seem to work.

    Bluetooth stack
    Toshiba OS independent NA World Wide
    http://Support1.toshiba-tro.de/Tedd-files2/0/bltstk-20070724121132.html
    Wireless Lan driver
    Intel Windows XP s/o world wide
    http://Support1.toshiba-tro.de/Tedd-files2/0/wlesslan-20070716135646.html

    Please help me get my WiFi and bluetooth
    I really need to use it.

    THX

    Hello

    The laptop does NOT have Bluetooth!
    That's why you can not install the BT stack!

    Regarding the WiFi network:
    I'm not quite sure what you have but here the map Intel WLan is a beautiful m document how to find the right driver:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  • Satellite A135-S2386 - DVD - RAM drive problems

    Hi guys, I have a Toshiba Satellite A135-S2386.
    I had once repaired because it is over heated and died.

    One problem I noticed, the fool who fixed, he didn't put it back correctly, and the DVD player has been hot glued...
    I fixed in March, April. But I'm used to, I can anyway...

    However, there is a significant problem.
    Written DVD player and bed PERFECTLY well in windows, however it cannot not be detected in the BIOS or what not.
    As XPInstallation Windows, Vista install detects it but BIOS can't.

    Can I update the firmware of the DVD-RAM? It's years Panasonic UJ-840.
    Or I can update the BIOS of the machine itself?

    You can boot from the CD? If the boot of CD work, then the BIOS is to see it properly.

    You could try an update of the BIOS anyway, go to http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • Satellite A80 129 usb mouse problem

    I have MS USB Intellimouse Optical. And if I connect the mouse to the first USB port (under the laptop computer right speaker), the mouse installs and then with the mouse disconnected constantly. As he works for a few seconds then disconnects and reconnects again, constantly. If I connect it to the other three USB ports, all is well. I don't want to use the other three ports for the connection of the mouse, but I want to use the primary, cause of handling convience (DVD-ram opening and limited space on my table). Also I installed the drivers for the Microsoft mouse, but the mouse plays the same.

    So is this hardware or software problem?

    I have WinXP Pro SP2 installed.

    Best regards, Kekec.

    Hi kekec

    Is there a possibility to check this port with another external device? It will be interesting to know if there is problem using some another unit.

    Anyway, in my opinion, it may be just the hardware problem.

  • Satellite M30X-144 DVD - RAM cannot read DVD

    Hello

    I have a portable Satellite M30X-144 and I'm having a problem with my DVD player (Mat * a DVD - RAM UJ-8315).

    I can play CDs, but when I put any kind of DVD in there, it does not read anything.

    What can I do to solve it?

    Hi João,.

    you have a problem with your DVD player? I suggest the following:

    Remove the disc in the "device manager" Windows, let windows reinstall, test if it works. If the same problem persists contact an ASP in local (certified partner)
    because your drive is probably faulty then your machine should be checked by a qualified technician.
    Here is a site where you can find the nearest ASP:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?subs=TAIS

    I hope that I helped you a little bit of the problem of your Satellite M30X. ;)

    Greetings from Croatia

  • Satellite Pro U200: DVD - RAM cannot read media

    Greetings

    I have a problem with a carpet * a DVD-RAM UJ 8425 in my notebook U200.
    When I insert the CD or DVD in the engine, it cannot read the media.
    The engine starts and runs disc twice or three times, then turn of.

    I have this laptop for 2 months, and only since yesterday, I have this problem.
    In Device Manager it is shown in working order,
    I have change the driver but it's still doesn't work...

    Can you help me to find out where is the problem?

    Hello

    It will be interesting to know does this happen with all sorts of data on the disks. Try checking Autoplay options in the ODD properties.

    By the way: you can see the contents of the disc in Windows Explorer?

  • Satellite P10 - 554 dvd - ram does not work

    I got a Satellite P10 554, and as I said above the RAM does not work.
    It should be a software problem, because if I reinstall the drivers it works a few minutes (it did until now yesterday it stopped completely)
    It is impossible to install the new drivers or update a firmware somehow
    (pilot: after rebooting, the old drivers are loaded again (but I uninstalled them))
    (firmware update: I still got the message: invalid drive to update f/w)

    I hope that someone of you can help me ;)

    Hello

    What did you mean with the work of t car doesn?
    You are not able to burn or read the media?

    The error message says it all. I think you re not able to update the firmware because the firmware is not supported on this drive.

    Try to remove the drive from Device Manager, and then shut down the laptop.
    Usually after restarting again the operating system should recognize the drive again.
    If this does not help, you can try to remove the drive from the laptop. Turn on the unit, then go into windows. The reader should disappear. Then stop and reset the drive in the notebook. After this procedure the laptop must load the firmware again.

    It will be useful.

  • Low-speed satellite Pro U400-142 - Wireless-N speed problems-

    Hi guys...

    I ve just bought a laptop Toshiba Satellite Pro U400-142...
    I have a belkin N1 Wireless cable router...
    I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

    I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
    Why show a low speed?

    I m in the same room as the wireless router if the signal is excellent...
    I've tweaked on with the settings in the network adapter settings...
    I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

    Can someone tell me what is the problem?
    I need to change some settings on my N1 router or what?
    This was one of the main reasons why I bought this laptop.

    concerning

    You have reason seems the wireless network adapter supports the Draft N
    But are you sure that you are using Draft N?

    Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

    At 802.11 N selected in your router settings?
    Update you the BIOS and WLan card driver?

  • Satellite P100-275: DVD - RAM drive is always detected at startup

    Hello

    I have a problem with my Satellite P100-275, all materials are installed correctly, but when the PC starts, I always "new hardware found" for: hl-dt-st dvdram gma-4082n.

    I tried to install the connection to Internet, I tried with the driver c:\toolscs\DVDRAM software\Setup.exe, but nothing seems to work.

    Here is the screenshot of the hl-dt-st dvdram gma-4082n in materials:

    http://img209.imageshack.us/img209/7326/materialsza4.jpg

    Thank you

    Hello

    Is this original delivered by car or did you upgrade?
    By the way: as far as I know if you use the original recovery with original configuration hardware delivered media, everything should work well. If you change something about yourself, it is possible that something is wrong. Usually, for DVD player, it is not necessary to install a special driver and because of that, I'm a little confused why this message occurs at the beginning upward.

    Please give us more info on this drive.

  • Satellite A80-154 / 3-4-3 beep problem

    Hello

    When I try to turn on the laptop, he made a series of beeps, 3-4-3 (short beeps, anyway) and the laptop is blocking down, but the Start button remains light, I need to hold down 5 seconds to turn off the laptop...

    In the past, I had this problem a few times, the laptop proceeded after a few tries, so I reinstalled windows too, but now it turn on at all...
    And now I have no battery for him, but after my opinion, this is not the problem...

    Hey Buddy,

    These beep codes usually mean that a hardware problem is detected...
    There is nothing to affect windows and battery doesn t it. You can also use the laptop without battery.

    You have two memory modules RAM? If so you should try it with a module only, maybe one or two modules are defective.

  • Satellite L20 error: DVD - RAM crashes with a blue screen with the use of cd-audio

    Hello world

    I have a very annoying problem: when I use audio-cd, my Satellite tends to crash with a blue screen. When it crashes, blue screen, scrolls and immediately a black screen and a restart follows.

    It is probably a driver problem, because I have three audioprograms installed (Windows Media player, Sonic Stage MiniDisc and I-tunes).

    Can someone give me advice? Thanks in advance

    Klaas

    Hi Klaas,

    It would be useful to know what the error message is when you get the blue screen. I suggest that you disable the restart automatic installation so that your laptop stops on the blue screen and you can read the error.

    To disable the auto restart: -.

    1. right click on 'My computer' icon and then click on "Properties".
    2. click on the "Advanced" tab
    3. click on 'Settings' in the section starting and recovering (towards the bottom of the window).
    4 uncheck 'automatically restart '.

    Please post again all the details of the blue screen error message.

    concerning

Maybe you are looking for