Linksys Nas200 not always visible in Win7 network

Similar Questions

• OfficeJet Pro 8630: Officejet pro models are not always connected to a network.

  Experienced various disconnects models 8630, X476DW and X 5? Printers of DW. Seldom had problem with except 8630 wired connection. Customer gave away because reliable unable to stay available for printing netwrok. New laptop connects via USB to RJ-45 gigabit loses the connection to X476DW. Old wired desktop to connect without problems. When restart printer he remembers everything in the queue and prints. Connectivity to the X 5? DW printer better but still loses connectivity to multiple laptops connected wireless. Spent hours online with HP to solve 8630 - it did not work. These problems exist on 2 separate networks, both now using ARRIS modem/routers/wi-fi as prinmary wired and wireless connections.

  Things to check on the Arris.

  Use a fixed wireless channel; 1, 6 or 11.
  Configure router to 20 Mhz only.
  Use WPA2-AES (Personal-PSK) encryption if possible.
  Disable the WPS and UPnP for the security of routers.

  On a double router broadband, make sure that the SSID is NOT the same

  SSID broadcast should be enabled.
  Check the latest updates firmware on the router.

  Regarding routers, I like Asus or Synology.

• Navigation bar is not always visible?

  Hello

  I use RoboHelp for Word 8.0, the exit to Micrcosoft HTML Help, Windows XP.

  Why is the navigation bar on the right not visible for some users of my project pane?

  Thank you

  Carma

  Hi, Carma,

  Looks like you may have implemented the feature sequence of navigation in the HTML Help Viewer. In this case, you must distribute the HHActiveX.dll control with your help file and ensure that it is saved on the systems of your users. See the following article:

  http://help.Adobe.com/en_US/RoboHelp/8.0/RoboHTML/WS5b3ccc516d4fbf351e63e3d11aff59c2a0-7f4 9. HTML

  Pete

• Linksys NAS200 2Bay SATA 2Port Network Attached Storage is not compatible with Windows 7

  Searching for answers, I found this: http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Linksys%20NAS200%202Bay%20SATA%202Port%20Network%20Attached%20Storage&v=Linksys&uid=NAS200&l=en-US&pf=0&pi=5&c=Networking&sc=Network%20Attached%20Storage&os=32-bit

  Aparently this device is not compatible with Windows 7.

  I have one of those NASs with 2 SATA hard drives of 500 GB searched... I have all my music, movies, photos, and all of our backups of document on this device.  Because I have set up as a RAID array, I don't think I can remove the discs and put them in something to get my "stuff".  We used to use Win XP but recently upgraded both our machines to Win 7.

  If someone has been able to find a way to get to their stuff on one of those Linksys NAS200 devices without finding another WinXP machine somewhere?

  Hi Ken Mizell,

  If the device is not supported in Windows 7, you need to use a computer that is running Windows XP to move the data to a new storage device.

• WRT1900AC - devices shown on the network map is not all visible in Windows 7 Explorer

  I just bought the router 1900AC as substitute of plugin for my previous WRT54GL router using DD - WRT.

  Each of the Linksys routers is configured for an IP 192.168.2.1 and each is configured to assign the device of intellectual property within this subnet.

  Each router works (not at the same time of course) when it is attached as a secondary router behind my Telus ActionTec V1000H DSL Modem/Router.  All my LAN devices with Gb ports are now much faster.  Internet speeds are tremendous.

  However, with the new 1900AC, my PC under Windows 7 router only see each other in the network of Windows Explorer pane.  In the content pane, I see my two Western Digital MyBookLive and my printer HP Laserjet devices, as well as media devices on my network.  But if I try to access a file (such as Notepad) and I select the network node, only the other PC appears in the list.

  The network of the 1900AC map shows all devices without any problem.

  The old WRT54GL router has also had no problem display all network devices.

  Can anyone suggest how I can do all the devices visible to my Windows 7 Explorer?

  WD (MyBookLive and MyBookLiveDuo) devices are connected to the ethernet ports.  Tablets connected via radio (a 2.4 Mhz and the other double 2.4 / 5.0 Mhz).

  After rally for second level support technology of LinkSys and waiting for their call, I saw what I knew, and since all devices appeared in the plan of network from the router, but not in Windows 7 is the router, or my windows firewall should block devices.

  My McAfee control center using I dropped the firewall and refreshed the Win7 network view - and all of a sudden all of the appliances were visible.  Problem solved.

  Then, I entered a new rule of connectivity that disable the firewall for all devices in the range * 198.162.2, introduced the firewall to the top and then restarted my PC.  All devices have remained visible after restart.

  Since each Windows PC has its own firewall, I repeated the process for my second PC.

  I have concluded that when Windows 7 sees a new router assigns a new network name and the network name does NOT inherit from the previous router settings - even if the routers have identical IP addresses and assign IPs client on the same subnet.

  For the benefit of third parties, if the router sees your devices but your windows PC does not work, drop your firewall and refresh your network view.  If the devices will be displayed, you must configure your firewall to let all devices in your same subnet.  This should apply to any firewall on any version of windows, I suspect.

• My wireless home does not appear on as a network available on my work laptop and always did before.

  My wireless home does not appear on as a network available on my work laptop and always did before.  He brings up and connect on my laptop. I have a Linksys broadband router - summer use it for at least two years with no problems until this.  I know that my wireless works on my laptop because there is an unsecured network listed in the available window.

  A really strange thing that happened two weeks ago (and I don't know if it's related) was my personal laptop was fine during several hours - then he kept abandonment of the internet connection.  I couldn't keep him connected - reboot etc didn't work.  I've not logged again until today - and that's what I use now.  He connected very well today.

  My work laptop had been connected to my wireless ealier in the week, but when I tried to connect as usual Thursday night he has not logged automatically as it has always done in the past.  Nothing has changed.  Security patches that my company had sent through this week have not downloaded until after that I tried to connect and couldn't.  There is nothing new - he had no reason to think I should not have automatically connected as I have in the past.

  Hi suemoo,
   
  -What version of service pack of Windows XP you are using?
   
  This problem occurs because the media connect action is not sent to the wireless service correctly.
   
  Method 1: Disable and then enable the wireless network adapter and check if it helps fix the problem.
  To do this, follow these steps:
  a. start the network connections tool in Control Panel. Click Start, click Control Panel, click on network connections and Internetand then click on network connections.

  b. right click on wireless network connectionand then click disable.

  c. right click on wireless network connectionand then click enable.

  Method 2: Try the methods listed in the following article and check, if it helps in fixing the issue:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• LaserJet 100 color MFP M175nw - network that is always visible to the public problem

  I have a laptop IBM running on Windows 7. I know that supposedly the SSID is supposed not to be visible when printing, but mine is always available and visible in the network Internet connections access bar at any time.  I can tell when neighbors are trying to open a session to serve as a Wi - Fi connection because the printer resets.  How can I make the invisible printer on the network?  The only way I can see to do disappear from the list of available wireless networks is to put off the printer.  Is there another way?

  I read:

  "The 'HP - Print - b9 - Laserjet 100' network is the ssid wireless direct to your printer for printing spot, but is based on the activity in a way (if there is no activity on the connection - i.e. print jobs - the connection is lost)."

  However, my connection is still available.

  There may only be two reasons for the SSID broadcast: the Ad - hoc is currently listed or Direct wireless function has been enabled (it is disabled by default).

  The SSID certainly resembles a Direct SSID wireless as an ad-hoc ID does not list default print.

  Perform these steps on the printer:

  1. go to settings.

  2. go in the Network Configuration.

  3. go wireless.

  4. check that the Direct wireless is enabled.  If this is the case, turn it off and the SSID you listed should be listed.

  Now, the ad - hoc connection will then broadcast.  Ad hoc is the standard wifi adapter when there is no network printer wifi connection.  Since you don't want the printer listed at all and you use a wired connection, I recommend you to disable the wifi function all together.

  This can be done by going into the menu wireless, where direct wireless scored, and turn wireless off.

  These measures will not affect the Ethernet or USB connections.  They're going to turn it off completely direct wireless and the wireless radio.

• SPA942 not visible to the network after factory reset

  Hello

  A while ago someone at our office a factory reset on one of our Linksys SPA942 phones.  He thought that it worked (it worked flawlessly; but our router has decreased. Great).  The sad thing is, from the factory, it did not work.

  The problem is that no matter what we try - DHCP or static IP - we do not seem to make this device visible on our network. As in, type us its IP address in a browser and do not see the Setup page.

  We have tried everything we can think of.  Subnet mask is correct. Addresses DNS and IP - PBX (for not they should really make a difference) are correct.  I don't see what the problem is.

  Can someone please offer a suggestion, before go me crazy? !!!

  Thank you very much.

  Jarrod

  First of all, thank you for your response. It prompted me to do some play. Here are the results, in case anyone else having a similar problem (a cable by a novice/cheapskate) stumbles across this post...

  We don't have a SPA9000. Simply, we have a Belkin router wired to four points:

  1. downstairs IP - PBX - work

  2. downstairs SPA942 & PC - both work

  3. downstairs SPA942 & PC - both work

  4 floor SPA942 (does not work) & PC (work)

  So... all PC connect perfectly to the Internet and the network, as do both phones down.

  Following the principle of your simple suggestion ("make sure that it is correctly connected to the network") and the first rule of tech support ("is the computer plugged in, sir?"), I decided to reject the hypothesis that the handset was at fault and check if the connection upstairs was to blame (even if the PC we have up there connects very well).

  Bingo! Telephone three works when it is plugged downstairs. Phone two, which worked fine at the bottom, does not work on the floor.

  So now I know what the problem is... but have no idea WHY the problem is. Why don't the floor point network working perfectly for each device I care to plug in - office book server, ATA, fax, you name it - and not for the SPA942?

  I changed all the cables around the router, in order to verify if there was something wrong with a specific port. That has not changed anything. Assume that all router ports are fine.

  So what does this leave... the cable? Seems unlikely, but all other possibilities have been rejected.

  So, I put the phone on the floor downstairs and plugged directly on the router, using another length of cable. Knit then all three phones.

  Look closer to the floor and found wiring that it is three separate lengths of CAT5, joined with connectors RJ45 base (suppose cabler could not to allow/couldn't be bothered buying a cable length).

  Last question... it is likely one of the lengths is a cable cross/patch... that all the devices other than our SPA942 are smart enough to understand this and to compensate accordingly? How the office is wired, it is very tedious and precarious (12 foot ceilings, etc.) to get in there and change the cable lengths, but obviously do so if it is the likely culprit.

  Thanks again,

  JD

• Why are my other computers not visible in "my network places"?

  OS: Win XP Home, XP Pro, Win 7 - my problem is with the installation of apparently weak network of the window (I don't know the correct terms)

  This had listen to me for years because I learned how to set up a small home network.

  I have 5 computers in my home office, all members of a WORKING group, and all with the same line DSL for internet access; I use a DSL modem connected to a wired router / wireless when a print server is also connected: I don't have a problem with internet access and printer at all (thank God for that).

  What bothers me a lot, is that a computer is visible intermittently in the network: I have a desktop computer that serves as my main production machine, an old IBM T23 used so much that my music server, 2 other laptops (XP & W7) and a desktop Apple computer.  That's what music/T23 server intermittently visible/available - what happens in the world is going on here?

  For once, I used Ubuntu & OpenSUSE and I never had this problem - i.e. all computers are ALWAYS visible and all records are accessible - ALWAYS (that made me say earlier that the installation of the network of the window is low).

  TIA,

  Web

  . e.

  "The test of a man's character, is what it takes to stop it." Dr. Bob Jones, Sr

  To access another computer, regardless if this computer is displayed in the my network places, network card, etc.:

  1. press the Windows key + R .

  2 type the name of the other computer in the Open: box in this format:

  \\computer

  3. press enter .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose each time now and it's not always r

  Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose every time now and that is not always known.

  Hi jeans37547790,

  Please do mention it below as follows to change the settings:

  Open Acrobat > click file > print > click on advanced > and check the box that says "Print as Image".

  Here is the screenshot:

  .

  

  Let us know if you face any problem.

  Thank you!

  Shivam

• Mr President, when I do some changes on a page of its buttons on the right side convert (> >) sings two more. What is that this does not happen and the buttons are always visible?

  Mr President.

  When I convert a few changes on a page of its buttons on the right side of the page (> >) sings two more.

  What is that this does not happen and the buttons are always visible?

  Concerning

  Did you try what I suggested?

  listed AFStretchWidth styleclass property of panelGroupLayout and remove the box toolbar tools just use inside grouplayout

  If this does not work please share your xml source

  Thank you

• Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I can back into my email account. Is there a way to permanently solve this problem? Thank you.

  Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I am able to get back into my email account. Is there a way to permanently solve this problem? Thank you.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • https://support.Mozilla.com/kb/cannot+log+in+to+websites

• HDR5010KB-digital recorder - signal does not always come through the use of HDMI

  Hello

  I bought the product above in October. Since then, I have had intermittent problems. When switching on the channel AV on my TV (a Panasonic TX-P42S20B) signal is not always crossed when you use the HDMI channel (I also connected via a SCART, and who works so always seems to be a problem HDMI.) It is particularly obvious when the recorder has been used for a while (be it for recording or playback.) It is not overheating (or if this is the case, not to the degree I get a warning message) and turn off the power to the electric network seems to correct the problem, but it's a pain.

  I tried to change the hdmi cable, as well as to try different channels AV on my TV and it did not help. Is this a common problem or make me a defective unit?

  Any suggestion would be appreciated

  Have you noticed the same problem using other devices connected to your TV (using the same cable)?

• How can I activate my Favorites bar is always visible?

  Win 7 home premium, I try to activate my favorites either always visible, I do not know if I ask the right question, but with IE8 I always the favorite toolbar, which helps quickly access me sites regularly visited with out having to get my favorite bar?

  Drag the button Circled and drop it on the toolbar bookmarks empty (black filled circle)

  Note: If you don't see this button, click the button Reset default defined in the window customize the toolbar

• Several tools/utilities do not work after the Win7 update

  Hello

  I work with a laptop Tecra A9 PTS52E that had Windows XP running on it.
  I've recently updated to Win7, but not a Toshiba installation disc.

  I found a number of drivers (not all) for tecra a9/win7 online;
  but some things still do not seem to work properly.

  First, I installed the added value package 20100419152838,
  but OSD and power Toshiba Manager do not work. Instead win7 always tells me that my battery is broken (?) Is it possible, this can be corrected?

  I've also had trouble finding Toshiba disc Creator, and I could not help security Toshiba works properly...

  Thank you

  If I understand you right, you did a new install of Win7, using the original installation disc for Microsoft. Can you confirm this?

  I must also say that all things must be installed in the correct order. I put t know how you did that, but I hope that most of the preinstalled stuff works correctly.
  VAP. What is OSD and what is the problem with the battery? Battery is not recognized correctly?

  Toshiba Disc creator is an additional software offered with the original image of recovery only and is not available for download?

  I know what Toshiba Assist, but can you please tell me Toshiba security help what?