Linksys WAG120N DSL light problem

Similar Questions

• WAG54G2 DSL Light no.

  Hi, I just bought this router today and I am faced with this strange problem. The telephone line when connected to my modem works fine but when I connect to the router and set it up so I don't see the comin DSL light. Nothing happens. I tried to CONNECT by the STATUS page when connecting the line without using a separator, but it still does not work. I checked all the settings such as user name, password, splitter etc and everything is ok. I've updated the firmware to the last Schedule A but the problem persists.

  Please help me.

  Thank you

  All made common cycle. Problem solved.

  Thank you

• Configuration Linksys WAG120N for cable internet

  Hi I am not able to configure the wireless router linksys for my Internet Bill fiber. Please help me.

  The ISP gives necessary PPoE and dynamic IP connection. I have the user name and password to connect to the ISP and internet active.

  But I am not able to configure the router to connect to the internet. Please help me

  Here's what you can try, I know I did it before with a Modem Router but not this particular model.

  Make sure you do not connect your computer to your router via an ethernet cable, turn off PPPoE and Wi - Fi features on your computer so that it uses only the Ethernet connection.

  Then access the WAG120N page.

  I have a question though, when you connect the cable from your modem to the router? Is the DSL port? Or on the ethernet port? If your modem cable is an RJ45 connect it to port 1 on the WAG120N, then on the page of the router you must activate something.

  Click Ethernet under Setup, and then select use as a WAN Port, select the connection type in the menu drop-down (select PPPoE). Enter the username and password provided by your ISP, then save the settings.

  

• How to connect my Airport Express to Linksys WAG120N?

  I recently bought a Linksys WAG120 + 2 Modem Router ADSL. I have a connection broadband ADSL with PPPoE. I want to use WAG120 as modem only & Airport Express as main WI - FI router. Please help how to configure my modem and Airport Express?

  Executer run through the installation wizard, select bridge mode.

  It should be a simple option available from the installation... but I don't have to say.

  http://downloads.Linksys.com/downloads/Userguide/1224645029534/WAG120N-160Nv2-32 0N-EMEA_UG_C-WEB, 0.pdf

  Bridge is explained in the manual... always an interesting place to look for instructions.

  The express for PPPOE in the Internet tab of configuration... Note that this is not reliable for many people. Your ISP MUST also support PPPOE.

  The network tab is then configured with DHCP and NAT. the rest is pretty much automatic.

• Toshiba Qosmio G50 - 12F - LCD light problems

  Hi everyone, I use to have problems with my laptop lcd light
  I used to change 3 new inverters and the problem is still there because it works very well Hi alternately dark and I am able to see very very low when I turn and on again once I turn on just for 5 or 10 seconds and turn dark again once I changed 3 inverters with similar without success When I unplug the main cable from the inverter and turn it on again it just turns on the light after a few seconds it darkens again
  any sugesstion what should I do if I have:
  change the ccfl
  change the complete LCD or
  change a motherboard

  No one has any idea what to do?

• Satellite A500-1EJ turns on itself - touchpad light problem

  Hello, I just bought a Satellite A500-1EJ and I have two problems:

  It lights by tself and volume and the light button does not work properly.

  Regarding the issue with automatic starups:
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=195616
  You must update the BIOS to the latest version to solve this problem

  > the volume and the light button does not work properly
  I don't know Mr. What volume or touchpad light you mean exactly and that is - this means not working properly?
  Perhaps you could be more specific and could provide more details

  Welcome them

• Low light problems?

  I bought a camera Sony TX100V USA Store. Everything is ok, good, but using low lighting, when I take a shoot in a place very dark and wide, this camera for a picture very much reflected light as a bubble of water on the image (I don't know, flash maybe). Now, I will send you pictures 02. You can see and check taken by me or the camera. Yes, by me, how to reset. Because it is the software of the camera (edit mode,...) or by material (objective,...) and how can I solve this problem?

  my configuration is: case flast auto, car of intelligence, EV 0, auto macro, auto face detection, automatic AF illuminator car of red eyes

  link 02 photos:

  http://img815.imageshack.us/img815/8591/dsc00403mg.jpg

  http://img692.imageshack.us/img692/2417/dsc00404sw.jpg

  If you need the original image, here:
  http://www.mediafire.com/?ng6t3sv77tkrd

  Thank you, best regards.

  Hello
  Welcome to the Forums of Discussion of the user.

  First of all. the white dots that you see in the picture are the reflections of dust of your flash.
  Second, if you take pictures of distant in a very dark frame objects, auto and flash are not recommended as you try to keep light natural lots you can.

  Here are two basic settings help you to: ISO and EV (opening)

  The ISO is a speed rating for recording media that incorporates an image sensor that receives light. Even when the exposure is the same images differ according to the ISO.
  ISO
  http://eSupport.Sony.com/docs/dvimag/DS... 13/13.html

  EV
  http://eSupport.Sony.com/docs/dvimag/DS... 12/12.html

  If manual is a bit too advanced, try to use the parameter of 'Twilight' or 'twilight pocket. "
  These scene selections will allow you to shoot scenes of night to a far distance (your pier is a good example of it) without losing the dark atmosphere of the surrounding area.

  several are on the settings here:
  http://eSupport.Sony.com/docs/dvimag/DS... 09/09.html

• Sony Ericsson XPERIA X 1 lighting problem

  One of the outdoor lighting LED four games seems to have failed. I used a lot of Sony Ericsson phones, and it's the first ever have a problem (probably because it was the one manufactured by HTC).

  No matter what other X 1 on agoraquest of owners who have had a similar problem?

  Thank you for your message. These forums are for Sony Vaio products and consumer only. Sony Ericsson have their own separate forums and are therefore better qualified to answer your questions, you can have on Sony Ericsson phones:

  http://talk.sonyericsson.com/community/support

• TP540p win8.1 update light problems?

  Hello

  update my new TP540p to win8.1 and problem awaken.

  I can not change the brightness and cannot turn out to fall asleep (System don't wake fuly, no picture just sound).

  After uninstall drivers and download brand new lenovo site support nothing has changed.

  I followed the tutorial on change of Microsoft Basic graphics card and the only idea that has happened is that when I press buttons for the brightness in the upper left icon showing that I do this, but light itself does not change.

  Help please?

  Thanks in advance.

  EDIT:

  Just trying to get back on the Intel back card and I lose information in the upper left corner on the use of keyboard shortcuts.

  SOLUTION:

  (1) disable the automatic installation of the driver.

  (2) delete the directory called drivers in c:\DRIVERS

  (3) remove drivers and check the delete option in the device for two graphics cards Manager.

  (4) install official drivers for lenovo to WIN8.1 site

  (5) make the coffee and relax the frustration

• Creation of red light problems

  I am currently working on a program to program a red light. I have attached a picture of what I'm trying to program. The problem is that I have no idea how the issue! I have a front set up with all the corresponding lights (red, yellow, green, left arrow turn) and a switch to indicate if a car is present to turn left. Now I'm not sure what I should do. I feel like I need to use a table for some time, certain registers at offset, as well as other things. If someone is able to help clarify an approach made me know!

  I use labview 8.5

  This looks like one of the old TCS example questions.  There is a huge thread about this here:

  http://forums.NI.com/NI/board/message?board.ID=170&thread.ID=316108&view=by_date_ascending&page=1

  There are solutions (official and users) given in this thread, but then I would try to work by yourself first.

• Linksys WRT 1900ACS + Linksys SE2800 - gigabit connection problem

  Hi guys,.

  I have a Linksys WRT router 1900ACS that is connected to a Linksys SE2800 switch. The switch is not recognized by the router as a gigabit.

  I also connected a computer with a gigabit network card via a cable, but I get only 100 Mbps speeds. My internet commection is a 500 Mbps. If I connect the computer directly to the router speed is about 470 Mbps.

  Is the switch defective?

  Thank you!

  andvarga wrote:

  For this 10/100Mbps port is displayed.

  OK, then you have a wiring problem. Replace the Ethernet cable with a good cable to know who is connected to before 1000mbps.

• WAG120N subnet mask problem

  Hello

  I have router WAG120N and I want to change the ip address of the local 10.1.X.Y computer and subnet mask of 255.255.248.0

  I changed the ip address but I couldn't change the subnet mask.

  Please help me...

  You can not. Linksys devices are mainstream devices and support only LAN 255.255.255.0 subnet or smaller. They consider that 254 IP addresses is sufficient for a consumer LAN.

• Flashing fresh light problem

  I have a problem with my hp probook 4530 s. while I use the continuous orange light flashing load on the battery and if I stop the laptop he still continues to blink, orange, charge indicator light will continue to Flash until I have the battery.

  I tried to make the tour of 30 sec that most forums have asked, but I did not.

  try to update the bios it says that it is not compatible with your system.

  I used this version

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts...

  Help, please!

  Which always indicates a battery problem or a motherboard problem. Contact HP for warranty support.

  This is not a normal operating condition.

• Display light problem

  I have problem on my Aqua #XperiaM4, while I log all calls then the lights turned off and not ON HIS n gone gone.

  After a repair s/w it has been solved, thank you for your answer

• W520 CapsLock indicator light problem

  For some strange reason the light green/yellow for the caps lock remains the even if the caps lock is disabled. The functons works fine, it's just that the light at any time.

  Y at - it a fix for the problem?

  Thanks in advance.

  Since you have now asked this question, I don't know if you try this...

  But here's the information: http://lenovo.f.relayware.com/content/CourseWarePublic/6631/course%20files/index.html

  (The steps are almost identical)