Linksys WAG54GS ver 1.1 firmware update

Similar Questions

• WRT54G2 ver 1.5 firmware update - loss of wireless connection

  After updating the firmware by the instructions, everything worked as expected until I received the message "upgrade reboot successfully" and I clicked on "continue".  At this time there the indications pointing to reset the router, I did.  But I could not restore the routers settings according to the instructions because I lost my wireless connection and could not properly use the Wi - Fi Protected Setup to restore.  I was blocked because the cell phone was the only computer on the network.  After a few hours and find out I could directly access internet via the modem, I found a solution in the forum that has helped me.  I used a patched my laptop and additional ethernet cable into one of the ports on the router and managed to access my page of the web-based configuration, and everything was good.  Hope this helps someone else and allows them to save time and heartache.

  That is right.  You're never update firmware wireless as it says in the instructions to always use a wired computer.

• The WAG54G v1.2 firmware update

  I have a WAG54G ver 1.2, 4 port eth + adsl wireless router.  The last update of the firmware on the support download site is Ver.1.02.1 from 18/05/2004, which is ridiculous! (details here: http://linksysbycisco.com/EU/en/support/WAG54G/download)

  It comes to the NVA, that I installed it on the router and the lt does not have same setting of WDS, so unit is more or less useless.

  I checked the alternatives open source (wrt line), but they are all with WAG54G V2 and no support previous models v1 and v1.2

  I need to somehow pass this router to something functional.  I checked the page of GPL code as well and while ls there a WAG54g list, I think that itd for V3 routers.  So the question is:

  1 is usable on v1.2 source GPL code (I guess not)

  2. suggestions for a WDS on the router (including beta / alpha firmware) is appreciated.

  Even the GPL code will not help you because often, it does not include modem etc drivers who are not GPL depending on the brand and the pilot.

  Another good reason not to get these combos of modem/router but get a simple simple modem with a router ethernet standard that you can use on any access technology...

  I can't talk about beta firmware. At least as far as I know even more recent E4200 does not support WDS with all other brands as Linksys. And you can be sure that they will not add anything to the WAG54G. It's all just too old.

  WDS has nothing to do with the routing. WDS extends the LAN inside the network local, there are only ethernet and MAC addresses. The routing is only between routers.

  What is so complicated: it's complicated. You repeat traffic. Access points must include any traffic for repeat and which is not, which means that they must find the topology. WDS severely effects of bandwidth. WDS often only works with WEP (or static, anti-rotation key WPA). Do a little reading in the internet...

  As it was not standardized how to handle questions from topologies you will often find that a Repeater works with a gateway of the same brand. A WDS would be possible with the same brand devices

• The WAG200G (EN) firmware update

  Hi all

  I just bought this marked wireless modem/router "manufactured 01/2007", so I think it is wise to update its firmware?

  Now, looking at the "Download" section of Linksys I found 2 versions newer than my WAG (dated 17/12/07 dated 04/04/07 1.01.04 and 1.01.06), then:

  -How do I know what version of the firmware of my WAG is currently equipped with?

  -Should I upgrade versions one after the other, or can I put it directly with the most recent version (1.01.06)?

  The available Linksys download updates are coming as zipped ".img" files: how to treat?

  Thanks in advance for your answers,

  See you soon

  Hi, go to your admin. modem...

  (a) open Firefox or IE

  (b) type 192.168.1.1

  type c) in your router username and password

  default user is "admin" password is "admin".

  (d) glance at the upper right side of the screen, there is a small description that says "firmware version".

  You can see what version of firmware you are on.

  If you want to update, download the latest firmware in a zip file. Unzip the file to your desktop.

  Assuming that you are still connected, go to Administration > Firmware Upgrade >

  You will come to a screen where they ask you to order the location of the new firmware.

  Browse until you reach the firmware (its an img file that you have unpacked above).

  Select upgrade

  my humble opinion... just use for your new WAG200G for now and check if the current firmware update is really necessary.

  his his works well, the authorization would be.

  Thank you

• WRT54G v4 unusable web interface after firmware update

  I tried to upgrade (actually downgrade) my WRT54G v4 firmware 4.30.11 to 4.21.1. When the progress bar reaches the mark to halfway, I got the message saying that the upgrade was successful. However, now the web interface is so messed up that it is unusable. It's a sign that something went wrong.

  Power, WLAN, Ethernet 1, and Internet lights are all green solid, which should be a good sign. After the upgrade, the web interface says "WRT54G 4.21.1', which is the firmware messed up I am downloading. Browsers, then restart my computer, I have confirmed that it is a router problem, not a problem of the browser cache. I also tried to do a hard reset by pressing the reset for 30 seconds button, unplug the router while holding down the button of reset for 30 seconds and then plug the router while holding down the button of reset for another 30 seconds. This has not fixed anything.

  I encountered a similar problem after an update of the firmware several years ago and the fix to upgrade the firmware using TFTP. This time, however, the TFTP utility could not download the firmware. Using a hack that I found on the internet, I have re - download the 4.21.1 firmware, but the web interface was always messed up. I then downloaded the 4.30.13 firmware. The web interface is still messed up, but then he said "WRT54GL 4.30.13. I then went to the firmware I wanted, WRT54G 4.21.1. The web interface is still screwed up, but said «WRT54G 4.21.1»

  Anyone know how to solve the problem? Yet once, it took place immediately after a firmware update, the web interface is unusable, is not a problem of the browser cache and tried a hard reset.

  Thanks in advance if anyone can help.

  My router model is WRT54G v4. The v4 WRT54G and the WRT54GL are generally considered to be the same device with different model numbers. According to the article of Wikipedia WRT54G, "the WRT54GL is technically a reissue of the version 4 WRT54G."

  I used the firmware 4.30.X for years without problems. However, I decided to switch to the 'right' firmware for my router and something went wrong during the upgrade.

  I solved the problem. I basically just dropped the Linksys firmware and uploaded the DD open source-WRT firmware mini instead. Now everything works fine.

• firmware update

  I tried updating my two cinema Display on my iMac (27 inch, end 2013) iMac Intel Core i7 3.5 GHz 32 GB 1600 MHz DDR3 NVIDIA GeForce GTX 775 M 2048 MB tons of time, using all possibilities, but unfortunately not worked.

  What is happening with this firmware?

  Hello RUBENSCOSTA,

  Thanks for this info and choosing the communities Support from Apple. I know how important to get your Cinema Display works again is for you!

  If I understand correctly, you are unable to update the firmware on the LED Cinema Display. I would like to try the following steps to get these working again:

  1 make sure that your iMac has all available firmware updates installed as well:

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor

  2. try to follow the process in this article on the updating of the LED Cinema Display Monitor:

  On the 27-inch LED Cinema Display Software Update 1.0

  3. If you're still having problems, you can see the general troubleshooting guide:

  Get help with your Apple Cinema Display Monitor

  See you soon!

• Airport Express firmware update

  I had a Firmware Update for my Airport Express.

  How can I update? I can only choose ignore, do not to update. In other words, what I did now.

  Zu-updates information to update Firmware as airport-Basisstationen - Apple Support

  It's funny. I think it's a bug.

  Airport-Dienstprogramm 6.3.6 on El Capitan

  "You are not allowed to create or update this content" - funny too.

  This firmware it works now?

  What model is the Express?

  You can do it manually even if it is a bit complicated.

  Re: proxy server annoy 7.6.7 update?

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• TimeCapsule Firmware update 7.6.4 is not possible

  on my Timecapsule is not possible firmware update.

  Airport utility shows me that there is an update, but I have no button to update.

  

  Hold down the option key and click two times on the base station. before an option there will be updated to version, click on it.

  The system will reboot and firmware will be updated.

• Airport Extreme Base Station model bricks A1408 after failed firmware update

  Shown on Macbook Pro iOS X 10.10.5 airPort utility update the firmware available for both devices on my network 3 June 2016
  1 Airport Express 7.6.7

  2 version of Extreme Base Station Airport unknown as not reported as I expected not die

  After the update successful of the AirPort Express, the update cannot be installed on the Base Station firmware.

  After waiting a while, I tried the update again which also failed to install.

  Current symptoms:

  a. the Base Station is hot indicating energy consumption

  b. No. LED light is during the power on self test or during the race

  c. not discover measure on the WIFI network

  d. is not identified on Ethernet connection without light next to the Ethernet port

  e. DC output is 12V on the connection of the power supply works as expected

  f. cannot perform factory reset using the reset button on the back of the Base Station

  Where other devices working on the same power supply as the Base Station that very sensitive to power outages - these remain functional during the attack of upgrading me to think that he has not lost power while firmware update took place.

  My home network is made entirely of Apple devices - should I worry on the application of the firmware updates in the future.

  It's embarrassing and I now Cat5 running through my house just to maintain services.

  I can't confirm the date of purchase, so I don't know if it is covered by the warranty, however, I'd like to think Apple would cover this.

  What I am doing wrong and y at - it a way to recover the device.

  Help

  We have seen a few posts of users who have had the same problem.

  Unfortunately, not a really nothing you can other your advocate Support of Apple.

  Good luck and hope that you will have this resolved quickly.

• Cannot run AirPort Extreme or Express 7.7.7 Firmware update-> gray button

  Hello!

  I have an AirPort Extreme and Express stations. Both come with a pill that indicates a upgrade must be performed:

  

  Now, I click on the AirPort Express icon. The following window appears:

  

  He told me that a Firmware update is available. But in this window, I can only select "ignore". I can't select the choice of the update.

  If I click on the "Edit" button to change the settings of the station:

  

  But in the window that appears, the "Upgrade" button is gray:

  

  The same thing happens when I click on the icon of the AirPort Extreme station.

  What is the secret path to the update of the Firmware 7.7.7?

  Thank you

  JHR

  Montreal

  MacBookPro 13 "mid-2012. 10.10.5 OSX

  Click on 'version' and you should be able to update from there on.

• TimeCapsule downgrades WiFi 2.4 GHz after applying the firmware update v7.6.7

  After applying the firmware update v7.6.7 free WiFi to TimeCapsule is now 2.4 Ghz instead of 5 Ghz.

  It was the update of the firmware with certainty that has made this... no doubt about it:

  • My mouse bluetooth interference notice when my MacBook is connected to WiFi 2.4 Ghz;
  • Before the update, everything is OK
  • After updating, my mouse mouse start jittering
  • < alt-click > WiFi icon in the menu bar confirms: the connection is now 2.4 Ghz

  Restart to e TM Mo doesn't change anything.

  In the TC WiFI options tried to put another name to the network successfully, but only 5 GHz can not connect to it: timeout error every time.

  Tried the hard reset of TC and reconfigure the WiFi... the same result, but with a difference:

  • Setting an SSID separated for 5 GHz connection (in the WiFi options) has now created a network I can access.
  • However, this is not the best solution... I don't want 2 SSID.

  It is not the first time Apple breaks things with updates... and I see people move away from Apple to this kind of situations.

  I also had bad experiences with OS updates lately and postpone the as much as possible.

  The problem is that I can't go back... or can I?

  Any help is welcome.

  THX

  The problem is that I can't go back... or can I?

  Of course, you can, but it may or may not help.

  Open AirPort Utility

  Click on the image of the AirPort base station

  Hold down the option key on your Mac while you click on the version number of the firmware

  A drop down menu appears

  Choose the version of the firmware you want to use

• TimeCapsule firmware update error, now defunct

  I received notification of a firmware update for my TimeCapsule AirPort, then click it to start the update. He seems to have run the update and was himself reboot after the bar got to end state. He came back with a message 'update error occurred'. Now the airport is not at all in the AirPort Utility window. Tried unplugging the power at the airport to force a reboot. Tried the manual reset button, still not joy.ow I have a constant flashing orange.

  Now, it's just an amber flashes continuously. And nothgin all appear in AirPort Utility window.

  Thoughts?

  Tried the manual reset button

  Sorry, don't know what this means, because there are 3 types of resets.

  Have you pressed the button of reset for 1 second and then release?

  Do you have the reset button during 5-6 seconds and observe the led flashing quickly until you release the reset button?

  Or something else?

  Have you restarted your Mac?

• Firmware update recent Airport 7.6.7 causing problems with VoIP

  Hi all

  Firmware update of recent Airport 7.6.7 causing problems with VoIP.

  Unable to connect voip since update...

  Any help appreciated.

  Thank you

  It might be useful to know what VoIP that you use and what type of problem the update affects your VoIP.

  My MagicJack & NetTalk lines properly.

  Jim

• Airport Station Basic 7.6.7 Firmware update

  Link to Airport Base Station Firmware Update 7.6.7 does not connect.

  Airport utility opened via spotlight. Keep now hold option key and click two times on the base station. in front of the version there will be a update option & so click it.

  System will reboot & base station of the firmware will be updated after some time.