Linksys WRT54G2 Set up page!

Similar Questions

• no error message Internet with linksys wrt54g2 v1 router

  Hello

  I connected my linksys wrt54g2 v1 connect to the LAN router and the WiFi worked perfectly well. Two days there was a problem with the connection to the local network and finally he solved. Now when I connect my router wireless to the LAN, the ssid is listed and when I connect to the WI - FI connection, see an error message saying "no internet access. Could someone help me solve this problem?

  Note: I have reset the router and changed the necessary configurations, but it still does not work.

  Thank you!

  Hi varun_umesh. It is obvious that the router is no longer communicates with the modem. Try to power cycle first two devices. Once the power supply light is good on the modem and the router, check again if the internet works on your devices. If not, these links will be able to help you to reconfigure the router.

  Setting up a Linksys router with DSL Internet service

  Setting up a Linksys router with cable Internet service

• How to add the routing of the internet (0.0.0.0) in the Linksys WRT54G2

  I want to add internet routing via an interface on the Linksys WRT54G2, usually in the PC / NB who want to connect to the internet after connecting to the wireless router, I use Route Add 0.0.0.0 mask 255.255.255.0 192.168.2.150 (that is 192.168.2.150, it is our gateway to the internet) or simply to set the proxy server in the browser.

  but to connect your handheld (such as the blackberry) that is wireless, it can not use internet and I cannot add the routing in the blackberry device, so the only way how to connect to the internet is the use of the routing of the Linksys wireless router, but when I add 0.0.0.0 in the route in advance, it shows an invalid IP address anyone experienced the same? Help, please...

  Thanks in advance,

  Nathaniel Franky

  1. you must turn off the DHCP server on the WRT and use instead a DHCP server on your gateway internet (or another DHCP server). The DHCP server assigns the default gateway for clients. It must be the correct internet gateway. Do not use the DHCP server on the WRT.

  2. the WRT will never accept a default route. It is designed to be the internet gateway. It will always use its own IP address as default for DHCP offers gateway (if the WRT DHCP server is enabled). It will always be to route internet traffic to the internet port of the WRT which must be connected to the internet.

• Two hard drives - what to set the page file to?

  I have two hard drives, Windows is installed on C:, what should I set my page of the settings file for better performance? Hard drive space is not a problem, I have a 250 GB and a 1 TB drive, both are less than half full. I have 3.25 GB of RAM DDR2.

  I heard move the swap file on a second hard drive is beneficial, because the OS files and the page file could be consulted at the same time. Defining a very large page file or file page on both drives will hurt performance? What is a variable size compared to a matter of constant size?

  It shouldn't be noticeable performance difference if the swap file is bigger than "necessary".

  If your system can it take into account, it is considered generally to be a performance advantage to put the file on a different physical disk than the operating system is installed, provided the other player does not see many IO already.

  By using a constant size / fixed can eliminate fragmentation of the file page that can occur if it is sized dynamically.

  If you anticipate relying heavily on the swap file, maybe reconsider and add more RAM to the system, if possible, or upgrade to a 64-bit computer and the operating system that is able to handle more RAM.

• Hi my name is LukaszT I would like to know if there will be an update of the firmware Linksys WRT54G2 v1

  Hi my name is LukaszT I would like to know if there will be an update of the firmware Linksys WRT54G2 v1.  I don't see any of the firmwares in the list of downloads

  There is a firmware (version 1.0.04)is) available on the site Web of Linksys router WRT54G2 V1.

  Follow this link and check the firmware available. Select the hardware version 1.0 V.

• New XBOX 360 S cannot connect with Linksys WRT54G2

  I can't connect the XBOX 360 (the new model S) w / XBOX Live through my Linksys WRT54G2.

  After automatic settings did not work, I tried a few manual instructions here:

  http://homecommunity.Cisco.com/T5/wireless-routers/WRT54G2-issues-when-it-s-plugged-in/m-p/207071?Qu...

  But it does not work.

  Note: I have a laptop and an iPad that connect to the router fine.

  Ideas?

  I went through and powercycled the modem cable, router and xbox in order... and now it works for some reason any.  I'm almost certain that this is the FIRST thing that I tried 2 hours ago.  So, I hope that the connection is not puff over time.  We'll see.

• How can I add a network from Windows XP to Windows 7 network. I use a Linksys WRT54G2 router.

  How can I add a network from Windows XP to Windows 7 network.  I use a Linksys WRT54G2 router.

  Try the method here...

  http://www.howtogeek.com/HOWTO/15247/complete-guide-to-networking-Windows-7-with-XP-and-Vista/

• Is there a quick and easy way to the entrance of calendar days in a day / diary of the page, instead of setting each page?

  Is there a quick and easy way to the entrance of calendar days in a day / diary of the page, instead of setting each page?

  If you make a text for the day of the page master frame, you can put on a single story that contains every day across all pages of the document. If you separate the days with a paragraph return, you can set the keep Options to start each paragraph in a new frame, and they will all go one-to-a-page.

• set of pages while exporting an article out of InDesign

  Export DPS Article in InDesign:

  Miss me the ability to set the pages I want to export to an article. Today you must export all all of the pages of time. It's on the roadmap? If not, where can I do a feature request.

  Thank you

  Haha

  Hi haha, you use a single InDesign file to create several articles? You have experimented with different layouts in the same InDesign file? That would help with your particular workflow.

  Export of specific page isn't on the roadmap. On the plan where to make a feature request, good question! I don't know actually. But, you've done pretty well just the feature request. :-)

• Friends of Hy. I want to ask that I am looking to get a pdf split software to split a pdf file into several PDF files with my set of pages specified. As if a document is 22 pages then I will specify the number of pages that must be cut in half to separate

  Friends of Hy. I want to ask that I am looking to get a pdf split software to split a pdf file into several PDF files with my set of pages specified. As if a document is 22 pages then I will specify the number of pages that must be cut in half in separate PDF files. for example I entered that do three pdfs of 1-5, 5-7, 8-10 pages and it will result in me

  first pdf = 1-5 pages

  second pdf = 5-7 pages

  Third pdf = 8 to 10 pages.

  Y at - there no way to do it with adobe acrobat or any other software? I tried many software including adobe with extract and split option, but I did not get the results you are looking for. so please:

  I would like to know if any of you have any knowledge about it. I have

  Thnanks in advance!

  Hi minixain,

  Yes, you can do it using Adobe Acrobat application (Adobe Acrobat free trial downloadversion |) Acrobat Pro DC), please refer to this document for help KB split a PDF | Adobe Acrobat DC tutorials.

  Kind regards

  Nicos

• How can I create a new master page with a different set of pages for the menu bar?

  I want to create a new Master Page that could be used for a different set of pages with a different menu pointing to other pages...

  For example:

  Master A to include a menu for pages:

  Page 1, Page 2, Page 3,

  Master B to the guests for the pages menu:

  Page 1, Page 4, Page 5...

  Maybe I would also do Master C and D with a bar of menus different total...

  But how can I isolate the menu bar from the rest of the pages that I don't want it?

  Right click on this page that you want to isolate > menu goto option > exclude from the menu.

  Hope It could help.

• The firmware Linksys WRT54G2 page links?

  I recently had problems with my router wireless wrt54g2 v1.0, remove client computer wireless connections. In an effort to solve the problem, I went to get an update the firmware here:

  http://www.linksysbycisco.com/us/en/support/WRT54G2/download

  Who created another problem. Firmware version 1.5 and 1.0 firmware have almost the same download link on this page as well:

  http://downloads.linksysbycisco.com/downloads/FW_WRT54G2V1.5_1.5.00.019_US_20090505, 0.bin

  http://downloads.linksysbycisco.com/downloads/WRT54G2V1.5_1.5.00.019_FwReleaseNotes, 0.txt

  http://downloads.linksysbycisco.com/downloads/FW_WRT54G2V1.5_1.5.00.019_US_20090505.bin

  http://downloads.linksysbycisco.com/downloads/WRT54G2V1.5_1.5.00.019_FwReleaseNotes.txt

  I figured this out the hard way after I've tried and failed to update my firmware.

  I've since found a link to an another firmware update, which is slightly newer than the one I had before. I found it here:

  http://downloads.linksysbycisco.com/downloads/FW_WRT54G2V1_1.0.03.001_US_20090317.bin

  There is no note of version that I could find.

  My questions, I guess, are;

  (1) is there any other firmware releass for my wireless router that are newer still?

  (2) if not, is there a way I can get the v1.5 firmware to work? TFTP and the web interface of the router to refuse this file that will be used to replace the current firmware.

  (3) in the absence of a solution in response to the foregoing, is there a solution that would allow my PC wireless client can reconnect to the wireless network after letting kickoff fall? Usually, they stay connected and will work perfectly for 20-36 hours, or should I say they can connect to the network without wire in this interval of time, but after that, if they are connected and get started, I can't their reconnected unless I have reset the router. Renewing the IPs on the client side does not work.

  I got the router using static and assigned by DHCP IP addresses and both with and without the wireless security is enabled (the nearest wireless AP is 7 miles away so I really didn't need the security anyway).

  Nothing of what I've done so far has solved my problem.

  Can anyone help?

  Hi Ricewind, first off let me say thank you for the answer.

  Then, let me say I think I've missed to erase me, so I'll try again.

  The firmware for my router wrt54g2 v1.0, on the Web site is not good firmware. I repeat that this does not work for my version, version 1.0, the router. I downloaded and tried. It does not work via the web interface or it works using the tftp interface.

  Here is a link to the page of my router:

  http://www.linksysbycisco.com/us/en/support/WRT54G2/download

  The link to download the firmware on my router is not correct. It points to the same folder as the firmware to version 1.5.

  Version 1.5:

  http://downloads.linksysbycisco.com/downloads/FW_WRT54G2V1.5_1.5.00.019_US_20090505, 0.bin

  The unusable firmware to Version 1.0:

  http://downloads.linksysbycisco.com/downloads/FW_WRT54G2V1.5_1.5.00.019_US_20090505.bin

  Someone needs to change the link to the Version 1.0 firmware file to point to a file that can actually be used to update the firmware of the router.

  PS,

  I could use this file to update my firmware:

  http://downloads.linksysbycisco.com/downloads/FW_WRT54G2V1_1.0.03.001_US_20090317.bin

  But this file does not appear in, anywhere on the support page for the wrt54g2 for any version of the router.

  I hope this helps.

• Home page and a few other Web pages have a vertical bar of 2 inches on each side of the page. How to permanently set set the pages to fill my screen?

  I have a HP - i5 with Win 7 and only use Firefox 35.0.5. Recently, I met some problems with my home page loading with blue text on the left side of my 2-inch screen and put it in the shop. Some viruses are removed and 35.0 FF was installed.

  Now my home page and pages loading with a 2 "empty bookmark bar vertically to each side of the page.

  Can I use zoom in on the view or the - + zoom and zoom to 100% to 133% increase, but this change is never permanent.

  Try to fix the problem I uninstalled FF 35.0 and installed FF 35.0.5 directly on the FF site. I also uninstalled AVG virus protection program. None of this has helped.

  How can I get rid of these vertical bars of 2 inches of empty space at all TIMES?

  I have a HP laptop with a processor AMD, Win 7 and Firefox 35.0.5 and he has never had this problem.

  Firefox should remember your level of zoom on a site-by-site basis. It is not "global browser" as in IE.

  Note: If you zap the history, make sure not to clear the Site preferences.

  If you need to adjust each site by about the same amount, you can use an add-on to set a higher level of the base line of the zoom. For example: Default FullZoom Level.

  Unfortunately, there is no unique zoom level that will work perfectly for all Web sites due to the preferences of individual positioning of their webmasters. But I hope you can find a good middle ground so you need not all zoom each time.

• can not set default page

  I can't set the default page. It keeps coming back to: http://search.jzip.com/

  1. Uninstall jZip (or jZip Windows or Windows jZip Toolbar) from the control panel > Add / Remove programs.
  2. Open Windows Explorer
     • Navigate to the folder C:\Program Files\jZip Toolbar
     • Double-click on uninstall
     • Delete the folder of Windows jZip toolbar.
  3. In Firefox, delete the add-on if it's there
     • Choose the modules > Extensions.
     • Select the jZip entry Toolbar If it is there and click Uninstall.
     • Close the window/tab of the Add-ons Manager
  4. In Firefox, reset preferences
     • Type of topic: config in the address bar and press ENTER.
     • If you see a cautionary, accept it (promise to be careful)
     • Filter = jzip
     • Results in the bottom panel, right-click each entry and click Reset.
  5. Restart Firefox.

  It would have taken options when installing jZip; See the image below.

  An excellent free application in lieu of jZip (and one that I used for a time very long) that does not install all the 'extras' are 7zip:

  • http://www.7-zip.org/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• Linksys WRT54G2 router: I can't guarantee or remove unsecured wireless network

  
  

  1. never use the default SSID "linksys". You should also do a unique SSID. If not, try your computer to connect to the router from your neighbor instead of your.

  2. Windows remembers wireless networks. You must remove the old unsecured network in the preferred networks list to get rid of him. After securing the wireless, you do not "have unsecure Linksys network. It's just that see Windows network called "linksys" and shows that all saved with this SSID wireless networks.

  So, the problem isn't the router or that a computer "picks up" a signal not secure (except even once, you really another router linksys with the default settings in the district), but the computer has a list of networks, he knows and shows that.

  Remove all linksys (SSID linksys) networks in the list of favorite networks on all of your computers. Make sure you set up a unique SSID instead and ensure that. That should do it.

  If the computers still captures a unsecure linksys network after you clear the list of preferred networks, it may be a different router. Unplug your router to power. Then again search for networks in the neighborhood. If the linksys appears again (probably with a weaker signal than before) is not your router.