Liquefy - application to another layer, but in reverse.

Similar Questions

• Impossible to ping a VM from another machine, but the reverse is possible

  My machine (Win XP) a 172.18.25.133 intellectual property and one machine other D2 (Win2008 server) has IP 172.18.25.72, both with gateway 172.18.24.1 pings

  D2, there is a VM Win7 whose IP is 192.168.111.129 with the IP 192.168.111.2 gateway

  Win7 VM of D2 can ping my machine, but I can't ping Win 7.

  Can you please how to add network 192.168.111.0 to my routing table so that I ping? Or where else to change the routing tables?

  Looks like your VM win7 NAT network uses - then it can be expected - try "bridged" after you disable "automatic gateways" in the virtual network Editor

• can I use my apple ID to the United Kingdom to download an application on another country

  I want to download an application on another country but my ID apple is only for the United Kingdom can I move to another country and sign in using my apple id?

  No, except if you travel in the country and provide the iTunes Store with a credit card valid in it.

  (143750)

• Problems with DAQmx - tasks missing when I run my application on another PC

  Hello

  I use a NI USB 6009 and my program use DAQmx and different tasks for the input and output signal.

  I created an application and I want to run this application on another PC, which doesn't have the development environment, but the runtime engine and installed MAX. This PC is connected to the NI USB 6009.

  Now, I have the problem that the tasks are missing on this PC and I get errors when I run the application.

  I wonder why these tasks are not put into the application automatically? What should I do now? Can I somehow export tasks in MAX and copy them to the other PC? Is not complicate it?

  Hi Johannes,

  Have you created your tasks of measurement and Automation Explorer?

  If this is the case, you must export the file of configuration of measurement and Automation Explorer and then import it on the other computer.

  With LabVIEW 2010, you can import a configuration via your Installer file, but I don't know if you can do it with LabVIEW 7.1

  Kind regards

• Java Web Start application runs under jre8u40 but not jre8u51

  We have a Java web application that uses javaws. It runs very well under the update of Java 8 40, but under the update Java 8 51 jp2launcher.exe stops right, without launching the application.

  • I found the papers in C:\Users\me\AppData\LocalLow\Sun\Java\Deployment\log, but they are identical between j8u40 and j8u51 (except of course for the order of pots are loaded, the version of jre and the start time).
  • I connected the launch using Process Monitor for the two versions of jre. Under j8u51, jp2launcher.exe ends with just the result of 'SUCCESS' Comparing the two newspapers procmon, I can't choose anything unusual. They have both search in the directory C:\Users\me\AppData\LocalLow\Sun\Java\Deployment and their respective C:\Program Files\Java\jre1.8.0_XX\lib directories and others like, but then the j8u51 there is only.
  • The Windows event logs show any what that touch of Java.
  • I managed to run the jnlp whose value "JAVAWS_VM_ARGS = - Xcheck:jni - XX: - TraceClassLoadingPreorder - XX: + PrintCommandLineFlags-verbose: jni-verbose: class - verbose: gc - XX: + PrintGCDetails-Djava.util.logging.config.file=C:\misc\logging.properties" and connect the stdout/stderr. It looks like an end to newspapers javaws and jp2launcher for versions of the output, then both jre8u40 and jre8u51. Probably in the j8u40 version it launches another jp2launcher.exe to run the application.
    • Comparing newspapers two output gives nothing interesting. Classes are loaded in almost the same order, for the most part identical classes other than the few differences that are explained easily by just be more up-to-date used classes.
  • Finally, I was able to launch the application directly, using java.exe, by getting the customer their unpacking and installing the server files. The application itself works fine in jre8u51, so the problem is definitely javaws himself.

  I find very little documentation on the inner workings of Java Web Start and no documentation at all on jp2launcher.exe. Can anyone suggest what could go wrong here, or other diagnostic measures I can take?

  e: sorry for the strange user name. I tried to change it in my profile, but the forums don't seem to accept the change.

  Hi people.

  I managed to find the solution. There are several factors that interact and I think one of them is a bug in Java Web Start.

  Please see full report at http://stackoverflow.com/questions/31556273/java-web-start-application-runs-under-jre8u40-but-not-jre8u51

• Liquefy a continuously rasterized layer

  Of course, it is not possible to liquefy a continuous current raster layer, but I need to find some means to pretend so. So far, I have had no chance. Y at - it ALL distortion that I could use that would be similar to the fluidity that works with continuous rasterization?

  Thank you!

  The trick here is to get the layer you want to liquefy at her level higher or more near plus proche distance distance of the camera, before dialing, then apply liquefy in the demo, and then reduce the pre come or change to a 3D layer and move it to the starting position.

• Monitor another layer for the events to change an effect

  Is it possible for an effect to listen an another layer change event and then react to this?

  Here's the situation: I have a plugin that has a setting of layer. This layer parameter points to a text layer. Now, I would have the effect to respond to a user who changes the contents of a text layer (TextDocument object). I guess I could somehow store the State of the layer and compare permanently for changes, but I feel in response to an event would be far better - if it is possible.

  Thank you

  Michael

  you do not receive a call from rendering when the text layer changes?

  in all cases, you can create an invisible param with an expression on the subject

  that links to the source on the text layer param. you change the

  Settings when the text is changed and will trigger a new rendering.

• Layer of scale automatically according to the proximity of another layer

  Hello!

  I am trying to write an expression that will scale a layer down as another layer gets closer (simulating a UI jumping off the page as a the mouse cursor is on it). That's what I have so far (a term applied to the scale property of the target layer):

  x = Math.abs ((effect ('Mouse Layer') (1)).transform.position [0] - transform.position [0]);           distance from the target layer and the mouse on the x-axis

  y = Math.abs ((effect ('Mouse Layer') (1)).transform.position [1] - transform.position [1]);           distance between the target layer and right-click the axis y

  t = Math.sqrt ((Math.pow (x, 2)) + (Math.pow(y,2)));                                                                   the actual distance of mouse layer in the center of the target layer

  fadeDist = effect ("Fade Dist") (1);                                                                                             distance to which layer begins the scaling

  sMin = ("sMin") effect (1);                                                                                                           minimum scale

  sMax = ("sMax") effect (1);                                                                                                        full scale

  s ease = (t, 0, fadeDist, sMax, sMin);

  [s,];

  It works fairly well, but it is based on the distance between the Center of the target layer and the mouse, not the limits/edges of it. For this reason, scale the target layer becomes as the mouse moves around the area of the layer itself.

  Is it possible for me to write this expression which 1) allow me to refer to the distance between the mouse and the edges of the target layer (a rectangle) the factor affecting the scale of the layer and 2) maintains the balance of the rectangle while the mouse moves that it contains?

  Thank you!!

  This is probably not exactly what you are looking for, but it may give you some ideas. It seems to work for a rectangular solid. It evolves as the mouse layer approaches, but remains at the top of the scale, once the mouse is inside the solid:

  sMax = 150; Max scale

  sMin = 50;  scale min

  dMax = 100; When the scale starts to distance

  dMin = 0; When the scaling of the remote ends

  M = thisComp.layer ("Layer mouse");

  PM = M.toComp (M.anchorPoint);

  x = h [0];

  y = h [1];

  p = toComp (anchorPoint);

  xMin = p [0] - width * sMax/200;

  xMax = p [0] + width * sMax/200;

  yMin = p [1] - height * sMax/200;

  yMax = p [1] + height * sMax/200;

  If (x<>

  If (y<>

  d = length (pm, [xMin, yMin]);

  } ElseIf (y<>

  d = xMin - MP [0];

  } else {}

  d = length (pm, [xMin, yMax]);

  }

  } ElseIf (x<>

  If (y<>

  d = yMin - MP [1];

  } ElseIf (y<>

  d = dMin;

  } else {}

  d = h [1] - yMax;

  }

  } else {}

  If (y<>

  d = length (pm, [xMax, yMin]);

  } ElseIf (y<>

  d = h [0] - xMax;

  } else {}

  d = length (pm, [xMax, yMax]);

  }

  }

  s = linear (d, dMin, dMax, sMax, sMin);

  [s]

  Dan

• Can I purchase a single license for multiple software? Buy one for a single application, buy another one for another, etc.

  Can I purchase a single license for multiple software? Buy one for a single application, buy another one for another, etc.

  You can purchase the license but on different emails if you need to use them on multiple computers. From an e-mail, you can install software on both computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it.

  Kind regards

  Hervé Khare

• Use roto brush result in another layer

  Hello!

  I used the roto/refine edge brushes to isolate an object FG in a few sequences of shooting. I would take the resulting mask from that and use it to cut a few 3D layers that should seem to be behind it. Is it possible to export the result as a mask roto brush, or use the roto brush effect to another layer? Or even to export just the alpha in the images I can pull back as a layer of film?

  The only solution I can think of right now is to copy the film with roto brush effect layer and the layer of the FG of the 3D elements cutting element, but I prefer to keep the 3D elements instead of adding an extra layer.

  Clause of the disclaimer that I am relatively new to AE, even though I'm known in other packages.

  Thank you!

  There is no rendering hit with two copies of your roto masked layer. There is no reason not to duplicate the layer and make a matte. You must have a source for the alpha somewhere. If you disable the RotoBrush effect, is all the same that never apply there is therefore no mast to extract. I would duplicate the images first, then roto first folio of the layer and use it as a matte.

  If you really do not want to duplicate the layer, but still want to have access to the info Matt Rotobrush you can use other techniques to rearrange the order of rendering so that the mask of roto is still usable but the images don't seem to be hidden. This will only two layers in your main computer.

  Before dialing your rotoscoped film move all attributes. This puts the mask on top of the rendering order. Apply presets for the layer of film of Pre-composed and the Alpha value, the bottom option, full. This leaves the first instance of the alpha in the rendering order stack. You can then use any presets or Set Matte on the layer that you want to apply the matte roto to extract alpha from the top of the rendering order. In this way the Alpha is extracted from the Rotobrush until the Alpha is set to integer by presets. It is the only way not to have only one copy of your images in your main comp, but it would take so much time to make simply to use a duplicate and follow mast.

  Another option would be to RotoBrush your film and then make a copy with alpha and then apply Set Matte or make a single copy of the alpha of the images to use as a matte.

• How to select a range of colors as in Photoshop or copy/move a layer in the mask of another layer?

  Hello

  I'm experimenting Photoshop Elements and wanting to use a layer of black and white (gray scale) I did as a mask of a another layer and do not know how to do in elements.  In Photoshop, I could do it (there may be a better way to do it in PS, but I've not yet discovered)...

  Click on the layer, I created that I intend to use as a mask

  Select all

  Copy

  Select the layer that I want the mask to be applied to the

  Click on the button Add a mask layer (bottom layer)

  Click on the mask icon so it is highlighted (and is not the image)

  switch to the channel display

  highlith the layer mask in the R, G, B of the layers and make it visible

  Dough

  invisible again

  Switch to layers.

  This works and retains the full range of transparency for the semi transparent and soft contours of mask etc.

  Otherwise, I can choose a range of colors, but this doesn't seem to be available in PS Elements.

  So, how do I get the same result in PS Elements?

  Thanks for your help

  Jonno

  After you have added your layer mask, Alt (Option) click on the thumbnail of the mask layer in the layers panel, and then edit > paste.

• Move the selection form, not the content, to another layer

  I understand that after the creation of any selection, CTRL-J copy the selection into a new layer, but this isn't what I want to do.

  I want to copy just the selection form (i.e. its contour), not its content, so that I can then apply this form of selection to any other existing layer.

  The goal is to take a selected layer A shape, apply the shape in layer B, remove the box around the selection into a layer B, and end up with a form in the B layer that contains the content of layer B pixels, no layer.

  I have Photoshop version 9, CS2. I tried to study masks, but were not able to find a basic explanation of beginner of masks

  Nice day!

  You can store a selection as an Alpha channel and then load it as often as you wish.

  Also you can use layer masks, those who can the duplicated on other layers (and if necessary reversed) easily.

  I want to copy just the selection form (i.e. its contour), not its content, so that I can then apply this form of selection to any other existing layer.

  It doesn't seem wise, an active selection is a property of the file and not a layer.

  The goal is to take a selected layer A shape, apply the shape in layer B, remove the box around the selection into a layer B, and end up with a form in the B layer that contains the content of layer B pixels, no layer.

  If the selection is anti-aliased or soft that risk unnecessary fringes.

  Could you please post a screenshot with the Panel visible layers to clarify your intention?

  Kind regards

  Pfaffenbichler

• How to get one application to another changes

  Hello
  
  I'm starting to write my thesis on data migration at the APEX.
  I have a master application running in our society and a few copies to run on other servers partners. When I make a change in the main application or in its database, how to make all the changes to other applications of the partners?
  I will write on the possibilities of how to do this. To get an informed perspective, I looked in some books from the library, but there is no real explanation how to do this. Maybe I'm looking for the wrong words.
  
  Can someone tell me some possibilities how to get the changes to an application on one server to another copy of this application on another server?
  You don't have to explain how it works. I need just a little help I know what I have to look in the library (or Google Scholar)
  
  Concerning
  Felix

  It depends...

  If 'other' applications and data are supposed to be exact copies of the 'master' of all at once, then you might be looking at replication of database.

  If 'other' applications are simply the 'versions' of a 'master' i.e. request with the same treatment base but different data then you look at configuration management and release management.

  I think you are talking about the latter: you have developed an application and installed in different places; you have changed the application (and some data) and now update remote applications to match what you have just developed?

• How can I get text from several fields on a layer, copy a field on another layer?

  A little help please, as he did for years I did any coding of any kind.

  So, I have a document of 4 pages with different types of fields.  I have a document script that gets "TodaysDate" which works perfectly and some other scripts as well.

  So what I try to do is to find a work around for the following:

  I have 3 fields - NAME, first NAME and date of birth.

  

  And I want to what is typed in these fields to fill in 1 field.  And according to this tutorial (http://acrobatusers.com/tutorials/how-save-pdf-acrobat-javascript) it is not really possible.  At least, I think that's what he said.

  However, I hope that maybe I could have a button to send at the end of this document when you click Copy the text of these 3 areas (that I would on 1 layer) in 1 field on a 2nd layer.  Is it still possible?

  I also want to make the document print, Save (by using the text in the field on the 2nd layer as file name), Email (using the text in the field of the 2nd layer as the subject line) and export to a specific Excel spreadsheet.

  I'm not much I do?

  I'm using Acrobat 9 Pro on a Windows PC, but also have access to Acrobat 8 Professional.  And I want to run the form in Acrobat Reader X.

  So far, I have 3 fields in 1 on another layer:

  function buttonClick() {}

  if(ButtonClick==false)

  {

  Event.Value = This.getField ("Surname"+"-"+"FirstName"+"-" + "DOB") .valueAsString;

  }

  }

  But I don't know how to call the event.value 1 layer to another, or if none of that code above would even work at all.

  I have a script that I works perfectly for registration and Email function:

  Using the function "doc.submitForm ()".

  It is the return e-mail form. Its hard-coded

  to make the shape always comes back to the same address

  Change address on your form

  var cToAddr = " " [email protected] "; "

  First of all, download the customer email CC

  var cCCAddr = this.getField("ClientEmail").value;

  Now get the email recipient if it is filled

  var cBenAddr = this.getField("BennyEmail").value;

  If (cBenAddr! = "") cCCAddr += ';' + cBenAddr;

  Set text object and the body of the e-mail message

  var cSubLine = 'Form X-1 returned to customer'; var cbody = "thank you for submitting your form. \n' + 'save the attachment of e-mail for your own records;

  * Send the form data as an attachment of XML on an e-mail

  Construct the URL to messaging

  var cEmailURL = ' mailto: . " [email protected] ? cc = ' + cCCAddr + '& subject =' + cSubLine + '& body =' + cbody;

  1. this.submitForm({)

  cURL: cEmailURL,.

  cSubmitAs: "XML."

  cCharSet: 'utf-8 '.

  });

  I'll work on export to Excel thing later I saw many tutorials on that.  But I can do the 3 fields to 1 thing at all?

  Help, please!

  First of all, you must understand that in 99% of cases, fields do not exist on layers. The two are separate entities.

  And the code you posted is not correct:

  Event.Value = This.getField ("Surname"+"-"+"FirstName"+"-" + "DOB") .valueAsString;

  You can access each field separately using the getField method, so it should be:

  Event.Value = This.getField ("Surname") .valueAsString + '-' + this.getField("FIRSTNAME").valueAsString + '-' + this.getField("dob").valueAsString;

• Noob question: move a layer in the opposite direction of another layer animation

  So say I have an icon that I animate on the axis y + 40px, but instead try to back key the other layer each time, is there an expression that I can write to have the other layer move in the opposite direction of the Y the same quantity of units (ex:-40px)?

  Thank you!

  We must define what traffic there is relative to. For example, if you want a layer of mirror movement are another layer from the first image, you could do it like this:

  p = thisComp.layer("leader").transform.position;

  value + [0, p.valueAtTime (0) [1] - p [1]]

  If you want to mirror around a value of y specific reference, it would be like this:

  yRef = 540;

  p = thisComp.layer("leader").transform.position;

  value + [0, yRef - p [1]]

  There are other variations/interpretations - depends on what you are looking for exactly.

  Dan