liquefy doesn't work do not all of a sudden

Similar Questions

• Apple TV3 works do not all of a sudden

  Hi all

  I have apple TV 3 connected to my TV and all of a sudden it stopped working.  I have a witness quickly flashing on the front and one on the TV screen apple logo.

  I tried: -.

  Now the menu button and play for 6 seconds

  connected to a mac with a usb microphone (can not see the Apple TV as a device, or anywhere in the menus / preferences)

  Unplug everything and restart everything including the router and the modem.

  All ives the same result - nothing change...

  Any ideas (other than go and buy another!)

  See you soon

  Andy

  You need to restore via iTunes

  Make sure that you follow the steps exactly (disconnect all cables, connect the usb microphone, plug). Connect directly to the computer. Try a different cable

• Network not working do not all of a sudden.

  Hello

  One day, when the closure of Windows Vista SP2, nothing don't is past he stayed on my desk and regardless of how many times I pressed close to the start menu, nothing happened. I was pressed so disabled the stop button.

  The next time that I put on, networking has failed. I went to Device Manager and all my wireless devices have an error code of-31.

  Also when I went to the network icon in the taskbar, it looks like:

  Connection status: unknown.

  The dependency service or group was able to start.

  I went back to the Device Manager and uninstalled some of my network devices, then reinstalled them via the HP Web site. Thinking it would be simple, I rebooted my computer.

  Network cards work, but he always said:

  Connection status: unknown.

  The dependency service or group was able to start.

  On the network icon and my computer would only connect to my network home with ' limited which means no internet access or network. "

  So I already have:

  • Uninstalled and reinstalled the drivers.
  • Started in Safe Mode, where it didn't always work, with active networking.
  • Tried to connect
  And it still doesn't work so I hope some of you can help please?
  Thank you.
  PS It is a HP Pavilion dv6836TX and my network is definitely working because my iPod touch and computer, that I am writing about the two are connected and works perfectly.

  Hi cjschris,

  For the service 'Service of diagnosis political', the problem may occur when permissions are missing.

  Step 1: Enable all permissions
  a. Click Start, type regedit, click with the right button on regedit and click "Run as Administrator"
  b. develop: Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters
  c. click right folder settings in the left pane, and then click Permissions.
  d. give full control, and then click ok.
  e. close the registry editor and restart the computer.

  Step 2: Start the Diagnostic Policy Service
  a. Click Start, type devmgmt.msc and press to enter.
  b. search strategy Service diagnoses and start it.
  c. check to see if the problem persists.

  See Some services start in Windows Vista

  Visit our Microsoft answers feedback Forum and let us know what you think.

• NICs works do not all of a sudden

  I had a 1200 router Belkin Wireless hung for 7 months on my Windows 7 PC and now all of a sudden he says none of the NICs (10 participants) to work.  There are yellow "!" next to each one.  I can't access the internet on the PC connected to the router, but I can access the internet on my MAC laptop.  What should I do to get these drivers still working on my PC?  I'm not a real person irritable so go easy on me, please.

  This error may indicate a problem of registry again.

  If it is a recent issue have you considered using the system restore?

• Small caps works do not all of a sudden

  Hello

  I have problems with a typeface in a pamphlet that I'm working on.  Earlier the saved file versions are fine, but I'm curious as to why all of a sudden, my "small caps" are not working in two character Styles and activating / disabling the option outside of the character Styles.  It only occurs with the font I want to use: Futura Std.  If I complete with Gill without, or something, it seems to work very well then.  What could cause this, and why it would work at the earliest versions recorded, but not my new packaged version?  It works with my plain "Futura", but not my OpenTypeface "Futura Std." thoughts?

  

  Is there are folder named fonts in the Document in the same folder with a User.ID file? If so, make sure that you install CS5 7.0.4.

  Bob

• All usb ports not working do not all of a sudden on windows xp

  I have 5 usb ports, which worked very well and all of a sudden none of them work, I checked the status of them in Device Manager and all say working properly?

  Hi Backgammon167,

  The question you have posted is related to Windows XP and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General&lang=en&CR=us

  I hope this information is useful.

  Concerning
  Rehman - support Micrsosoft

• SimplePass 6.0 doesn't work is not all a süden :(

  Hello

  I have a HP Pailion dv6-6c35dx, and until 2 days ago my SimplePass worked very well. Now, he only would light up on the way Web sites (but I can still drag my finger to log on the computer itself). I just tried to open SimplePass with my DEPARTURE, and he said sensor not connected? WHAT SHOULD I DO?

  ShabbyVos,

  Welcome back - SimplePass may have been updated since your last version installed.

  First of all, try this:

  ·         Close all your programs and shut down your computer
  ·         Unplug everything (little unifying for the keyboard / mouse external can stay)
  ·         Perform the Hard Reset for your laptop
  ·         Start the computer and connect

  Next: Take a look at the information in this file:

  Simple Instructions for upgrade HP SimplePass

  It is likely that it is a simple fix; Create your Restore Point and make sure that your backups are complete and up to date before you make changes to your computer.

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• Word, iTunes works do not all of a sudden

  I can't open programs such as Microsoft Word 2007 or my iTunes.

  When I try to open Word, I get a message saying "the application could not initialize correctly. Click OK to close the application. »

  The message that I get when I try to open iTunes is "iTunes is not installed correctly. Please reinstall. »

  All these problems are is asked at the same time, even if they had worked fine before. What should I do to fix this?

  Hi MauricePrince,

  1. are you facing problems with these two applications?

  2. you remember to make changes to the computer before this problem?

  What for Word, you can post your request in the forum Office for assistance:

  http://answers.Microsoft.com/en-us/Office

  You can also view the following Apple support link and check if it helps:

  http://support.Apple.com/kb/HT1926

  Hope this information is useful.

• iCloud sync works do not all of a sudden

  I have iMac, iPhone, iPad 9.7 Pro and iPad Air-1 - 6s all set up to sync, and everything was fine until a few weeks ago.

  Safari & photo stream always sync ok, but the Contacts, calendars, reminders are synchronized with all devices.

  The latest appears in iCloud.com - what is good.  Also appears in applications of iMac - it's good.  But do not show up in the iPhone or the iPad unless news comes from the device.  New iMac also will not sync to devices.

  (Using the new iMac with OS 10.9.5 and all devices with iOS 9.3.1 - was ok in this way until recent times)

  Any ideas?

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Have you tried the signature to iCloud and then reconnect?

• GTX 480 works do not all of a sudden forward Premiere Pro CC 2014 Blu UI?

  Was great job last night and today I opened up to work with my videos today I get a message saying that mercury reading will no longer support my card.

  And it goes to a red line under the task bar.

  I put my gpu sniffer in CMD and press ENTER, and it said cuda test failed for the card?

  In the map list .txt, it always shows the 480 in there.

  I was watching videos on other programs...

  Someone at - he heard of this or have any ideas on what I could do?

  Thanks for any help... I'm just at the end of a project... Murphy's law

  Mark

  NVIDIA gives you the ability to do a clean install or something similar: what to choose.

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• spell check doesn't work is not in outlook on windows 7

  Hi the spell checker doesn't work is not in my outlook for windows 7. This can be corrected?

  Sincerely, Robert H.C.

  Outlook.com has a manual spell at the top next to the options button control. It won't appear that if you write an e-mail AND if your browser is not checking spelling himself. In most modern browsers the spell checking is done by the browser itself and may need to be enabled in this browser

  http://email.about.com/od/windowslivehotmailtips/Qt/How_to_Use_the_Windows_Live_Hotmail_Spell_Checker.htm

  You may need to activate in your browser

  Google chrome
  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=95604

  Firefox
  https://support.Mozilla.org/en-us/KB/how-do-i-use-Firefox-spell-checker

  IE , it depends on the version you have.

  http://blogs.msdn.com/b/ie/archive/2011/11/08/typing-with-speed-and-accuracy-in-IE10.aspx

  For additional amount IE 10 tips https://ie.microsoft.com/testdrive/Browser/SpellChecking/Default.htmll

• DNG Converter doesn't work is not on a camera called raw photo

  DNG Converter doesn't work is not on a raw photo camera that always comes back with this Message "check if the camera is recognized.   "

  Supported cameras Camera Raw plugin | Compatible cameras

• I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. How can I solve this problem.

  I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. If restore system 2 or 3 days before this date my document becomes available. How can I solve this problem. I have a user and admin in this system. But the user has the power to admin. I use Windows XP.

  Hello

  · Were there any changes made on the computer before the show?

  · Who is the service pack installed?

  Follow the steps from the link below when you receive the error and check to see if this helps: how is ownership of a file or folder in Windows XP: http://support.microsoft.com/kb/308421