List of places scrape with powercli

Similar Questions

• The list of devices/paths HBA with Powercli

  Hi guys,.

  I would like to know if is there a way to get the list of devices a vmHBA given with PowerCli HBA.

  

  Of course, try this.

  Get-VMHost | %{
       $esxImpl = $_
       $esx = Get-View $esxImpl
       $esxImpl | Get-VMHostHba | %{
            $hba = $_
            Get-ScsiLun -Hba $hba | %{
                 $lun = $_
                 $row = "" | Select Host,HBA,Device
                 $row.Host = $esxImpl.Name
                 $row.HBA = $hba.Name
                 $row.Device = ($esx.Config.StorageDevice.ScsiLun | where{$_.Key -eq $lun.Key} ).DisplayName
                 $row
            }
       }
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Download the virtual machine in a store of data with powercli

  Hello

  How to list the files of virtual machine on a store of data with PowerCLI

  I have a virtual machine and I want to see all the files in a data store (such as hard,.-flst.vmdk, .log, .nvram) using powercli. Is this possible?

  TKS.

  Try the following, it uses a function of my position of friendly units .

  Function Get-FriendlyUnit {}

  <>

  . Numbers converted small binary multiples SYNOPSIS

  . DESCRIPTION the function accepts a value and him will convert

  in the largest available binary unit.

  . Author NOTES: Luc relaxing

  . Value of the PARAMETER

  The value to convert.

  This number must be positive.

  . IEC PARAMETER

  A switch to indicate whether the function should return the CIS

  Unit, or the names of the units most commonly used names.

  The default is to use the commonly used unit names.

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456

  . EXAMPLE OF

  PS > 123456 | Get-FriendlyUnit - CIS

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456,789123, 45678

  #>

  (param

  [CmdletBinding()]

  [parameter (mandatory = $true, ValueFromPipeline = $true)]

  [double []] $Value,.

  [switch] $IEC

  )

  Begin {}

  $OldUnits = "B", "KB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB".

  $IecUnits = 'B', 'KiB', 'MiB', "GiB", "TiB", "PIF", "BANK", "ZiB", "YiB".

  If ($IEC) {$units = $IecUnits} else {$units = $OldUnits}

  }

  {in process

  $Value | %{

  If ($_ - lt 0) {}

  Write-Error "Numbers must be positive."

  breaking

  }

  If ($value - gt 0) {}

  $modifier = [math]: Floor([Math]::Log($_,1KB)))

  }

  else {}

  $modifier = 0

  }

  New-object PSObject-property @ {}

  Value = $_ / [math]: Pow(1KB,$modifier)

  Unit = & {if ($modifier - lt $units. {Count) {$units [$modifier]} else {'1KO E {0}' f $modifier}}

  }

  }

  }

  }

  foreach ($vm in (Get-View - ViewType VirtualMachine - property Name, 'LayoutEx.File')) {}

  $vm. LayoutEx.File |

  Select @{N = "VM"; E = {$vm. Name}},

  @{N = 'Name'; E={$_. Name.Split(' ') [1]. "Split('/') [1]}},"

  @{N = "Path"; E={$_. Name}},

  @{N = 'FileType'; E={$_. Type}},

  @{N = "Datastore"; E={$_. Name.Split(']') [0]. TrimStart('[')}},

  @{N = "size"; E = {}

  $val = get-FriendlyUnit-value of $_. Size

  "{0:n2} {1}" f $val. Value, $val. Unit

  }}

  }

• List of virtual machines with Mac static

  I was trying to find a way to list virtual machines with static Mac with their mac assigned.  Exploring the virtualmachine view I have found the where it is said to be static, but have not been able to find a way to filter, it.  Is it possible to do this with powercli?

  Hello

  I think it's just what you are looking for http://boerlowie.wordpress.com/2011/07/29/get-all-vms-with-fixed-mac-addresses-using-powercli/

  Kind regards

  Yasen

• List of virtual machines with static IP

  VMware gurus,

  I'm trying to generate a list of virtual machines that are configured with static IP address.

  IPPolicy: static

  I need a script that returns the name of the virtual machine that has static to IPpolicy.

  Jadapa RHCE, MCSA

  http://linuxgurus.WordPress.com

  You can create a list of virtual machines with static IP addresses with the following script PowerCLI:

  Get-VM | `
    Get-VMGuestNetworkInterface -GuestUser User -GuestPassword Password -HostUser User -HostPassword Password | `
    Select-Object -property VM,IPPolicy | `
    Where-Object {$_.IPPolicy -eq "Static"}
  

  Best regards, Robert

• Export all the objects with PowerCli

  Hello

  I'm not in VSphere or vmware but a Director of SCOM and I am currently working on a solution to monitor our VCenter with SCOM server. To be able to automatically resolve alerts, I would need to find a way to export a list with all the objects of the VCenter server to create them as instances in SCOM and map the error directly state events to these objects.

  I think that this should be possible with PowerCli so the plan was to have a script export this list frequently and run a discovery of the SCOM Agent Script to automatically create related instances. Does anyone know how this export could be made with PowerCli? Since I'm not in vmware / vsphere and we don't have a test environment, but only the Production System in our office, I am somewhat limited in trying just by the cmdlets to discover this.

  No matter what pointer in the right direction which cmdlets can achieve this is as welcome as script ideas that could help me out here.

  Thanks and greetings

  Marco

  OK, I see.

  When you want to display a map, it is better to load the objects requested in advance and update them regularly.

  Have you ever thought about what you want to see on the map?

  A hierarchy of the sample could be

  vCenter(s)                                     <- in $defaultVIServer after a Connect-VICenter
    datacenter(s)                              <- Get-Datacenter -Server 
     cluster(s)                                   <- Get-Cluster -Server 
        resource pool(s)                     <- Get-Resourcepool -Location (Get-Cluster )
           guest(s)                               <- Get-VM -Location (Get-Resourcepool )
        vmhost(s)                               <- Get-VmHost -Location (Get-Cluster 
           datastores                           <- Get-Datastore -Location (Get-VMHost )
           network
              vswitches                         <- Get-VirtualSwitch -VMHost (Get-VMHost )
                  portgroup(s)                 <- Get-VirtualPortgroup -VMHost (Get-VMHost )
     standalone host(s)
        guest(s)
        datastores
        network
           vswitches
               portgroup(s)
  

  I added some of the cmdlets that you can use to get items for a specific branch of the hierarchy.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Turbo Tax CD setup.exe file not available in Explorer. CD is listed in the Explorer with an Apple on the drive.

  My Turbo Tax CD does not start automatically with the initial insertion in the CD player.  The CD is listed in the Explorer with an Apple on the drive.  The Explorer does not list the file setup.exe on the CD.  However, he lists a few other folders.  I use Vista to try to load the CD.  The CD does very well on my XP computer.  Is there a problem with Vista with the CD that are for MAC and Windows PC?

  Hi Undertaker Farmer,

   

  Welcome to Microsoft Answers Forums.

  • You get the error message?
  • What is the edition of Windows vista installed on the computer?

  TurboTax is a non-Microsoft program and we are not trained in this regard. However I will try my best to help you. Please, follow these tips and see if it works.

  As a work around you perhaps activate the AutoPlay for the CD and check if the auto play works.

  When you turn automatic playback, you can choose what should happen when you insert different types of digital media into your computer. For example, you can choose what digital media player is used to play CDs. When AutoPlay is disabled, you are prompted to choose what you want to do when you insert media files in your computer.

  1. Open AutoPlay by clicking the Start button, clicking Control Panel, on material and audioand then click AutoPlay.
  2. Do one of the following:
     • To turn AutoPlay on, select the Use AutoPlay for all media and devices check box.
     • To turn AutoPlay off, clear the Use AutoPlay for all media and devices check box.
  3. Click Save.

  You can also try to copy all the contents of the CD to the hard drive and try to install and check.

  You can also try to run the file Setup from the command prompt and check what is happening.

  Click Start and type cmd and press enter in the command prompt window type the following command : \setup.exe and press ENTER.

  See also the link below for the site of TurboTax on the requirements and check if your computer meets the condition.

  TurboTax 2008 system requirements

  http://TurboTax.Intuit.com/support/kb/installing/system-requirements/6389.html

  If fail steps above I would suggest that you contact TurboTax support for more options, see the link below.

  http://community.Intuit.com/QuickBooks

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• List of Blackberry phones with internal GPS

  Hello

  We are developing the GPS application and I would like to provide my clients with the complete list of phones Blackberry with built-in GPS receiver.

  I wasn't able to find the list updated on blackberry.com.

  Anyone know the link where I can get this information.

  Thank you

  Thank you and I was able to find the official list.

  For anyone else that might need:

  http://NA.BlackBerry.com/eng/devices/features/GPS.jsp

• Cc of Photoshop [began to shoot pictures of my wines and place them with grain or noise above]

  my current photoshoo began to shoot pictures of my wines and place them with grain or noise on top. I tried to solve this problem without adobe success Ive deleted the program and downloaded without success on the issue of fixing.

  Make sure that Cache levels are set at least 4 under preferences > Performance.

• Query to find the Pages and the list of permissions associated with a particular role in PS

  I want a query to find the Pages and the list of permissions associated with specific roles in PS.

  For example, if we see the role of manager accounts payable, it conatins Pages and the list of permissions.

  But, to get everything in EXCEL sheet by Manuel priocess's BIG job. So, can someone give me the query.

  Please try under queries

  The roles assigned to the list of Perm:

  SELECT B.ROLENAME

  OF PSCLASSDEFN A, PSROLECLASS B

  WHERE (A.CLASSID = B.CLASSID

  AND A.CLASSID =: 1).

  List of Perm pages can access:

  SELECT B.MENUNAME, B.BARNAME, B.BARITEMNAME, B.PNLITEMNAME, C.PAGEACCESSDESCR, B.DISPLAYONLY

  OF PSCLASSDEFN A, PSAUTHITEM B, PSPGEACCESSDESC C

  WHERE (A.CLASSID = B.CLASSID

  AND A.CLASSID =: 1

  AND B.BARITEMNAME > ' '

  AND B.AUTHORIZEDACTIONS = C.AUTHORIZEDACTIONS)

• How can I get the version of VMware to virtual machines with powercli officer?

  How can I get the version of VMware View Agent running on a virtual machine with powercli or view Powercli?

  As much as I know there is no cmdlet PowerCLI for this, but you can use the Invoke-VMScript cmdlet and interrogate the Win32_Product class.

  By running the following. You can add a Where clause to return only the Agent of the view

  Get-WmiObject-class Win32_Product | Select the name, Version

• count the number of targets, devices and paths by hba for each host with powercli 5.5

  Hi all

  I'm writing this Question again in the community, was not able to found the answer I was looking for in the nets:

  https://communities.VMware.com/thread/516226?start=0 & tstart = 0

  https://communities.VMware.com/thread/293531

  I went through the scripts provided in the community, but seems that t not work on powercli 5.5.

  ///

  # The target account, devices and paths for each host

  Get-Cluster $cluster | Get-VMHost | Sort-Object-property name. {ForEach-Object

  $VMHost = $_

  $VMHost | Get-VMHostHba-type FibreChannel | Sort-Object-property device | {ForEach-Object

  $VMHostHba = $_

  $ScsiLun = $VMHostHba | Get-ScsiLun

  If {($ScsiLun)

  $ScsiLunPath = $ScsiLun | Get-ScsiLunPath | `

  Where-Object {$_.} Name - like "$($VMHostHba.Device) *"} ".

  $Targets = ($ScsiLunPath |) »

  Group-object - property SanID | Measure - Object). County

  $Devices = ($ScsiLun |) Measure - Object). County

  $Paths = ($ScsiLunPath |) Measure - Object). County

  }

  Else {}

  $Targets = 0

  $Devices = 0

  $Paths = 0

  }

  $Report = "" | Select-Object - property VMHost, HBA, target devices, paths

  $Report.VMHost = $VMHost.Name

  $Report.HBA = $VMHostHba.Device

  $Report.Targets = $Targets

  $Report.Devices = $Devices

  $Report.Paths = $Paths

  $Report

  }

  }

  ///

  I went through the script LucD posted below: but it's not exactly what I'm looking for.

  LucD : can you please change the same for me please.   to count the number of paths per hba for each host with powercli 5.5, devices and targets.

  //

  $esx = get-VMHost < host name >

  foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}

  $target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal

  $luns = get-ScsiLun - Hba $hba - LunType 'disk '.

  $nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum

  Write-Host $hba. Device ' target: ' $target. County "devices:" $luns. County ' path: ' $nrPaths

  }

  //

  I'll be grateful for any help.

  Tarun Gupta

  Try something like this

  {foreach ($esx in Get-VMHost)

  foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}

  $target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal

  $luns = get-ScsiLun - Hba $hba - LunType "disk" - ErrorAction SilentlyContinue

  $nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum

  $props [ordered] = @ {}

  VMHost = $esx.name

  HBA = $hba. Name

  Target = $target. County

  Device = $luns. County

  Path = $nrPaths

  }

  New-object PSObject-property $props

  }

  }

• I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  Hi gurrus and LucD

  I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  The script should search for information in a multiple Vcenter servers and multiple clusters and list all the VMs name, status (two powers on or off) with type card NETWORK Type E1000 only no other.

  Concerning

  Nauman

  Try like this

  $report = @)

  {foreach ($cluster Get-cluster)

  foreach ($rp in Get-ResourcePool-location $cluster) {}

  foreach ($vm in (Get-VM-location the $rp |)) Where {Get-NetworkAdapter - VM $_______ | where {$_.}} Type - eq "e1000"}})) {}

  $report += $vm. Select @{N = "VM"; E={$_. Name}},

  @{N = 'vCenter'; E={$_. Uid.Split('@') [1]. "Split(':') [0]}},"

  @{N = "Cluster"; E = {$cluster. Name}},

  @{N = "ResourcePool"; E = {$rp. Name}}

  }

  }

  }

  $report | Export Csv C:\temp\report.csv - NoTypeInformation - UseCulture

• Unable to connect to vCD with PowerCLI

  Hi, can you help me with troubleshooting problem with connecting in vCD using PowerCLI.

  When I log in using my system administrator account

  Connect-CIServer vcdCell01 - User "username-password"pass"

  I get:

  Connect-CIServer: 11/30/2015 connect 12:19:21 AM-CIServer the

  Server returned "Unauthorized" with the status of the authorized 401 - no code.

  On line: 1 char: 1

  + Connect CIServer vcdCell01 - User "username-password 'pass' '.

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [connect-CIServer], CIException)

  + FullyQualifiedErrorId: Cloud_ConnectivityServiceImpl_ConnectCloudServer

  _ConnectError, VMware.VimAutomation.Cloud.Commands.cmdlets.ConnectCIServer

  I can connect to the Web user interface using the same system administrator account.

  The only way I can connect with PowerCLI is when I create the local account in one of the organizations and Add - Org to order

  Connect-CIServer vcdCell01-user "localuser" - password 'localpass' - 'org' Org

  Help, please.

  I used a few tricks of Python to connect to vCD. To connect as a system administrator, I had to use "Administrator@System" as the user.

  Maybe it will work for you if you use '-Org system?

• A list of virtual machines with type of controller of

  Hi guys,.

  Sorry for the dummy question, but I have new noob in powershell I can not understand how to get the list of virtual machines with type of controller of

  I would like to hva something that looks like this:

  controller name

  Mega-vm IDE

  Super-vm paravirtual

  lsi Tester-vm

  Get - vm mega-vm | Get-ScsiController shows which scsi controller is in the vm, but indicated a virtual machine name and do not watch IDE at all (do get-scsi ))

  Try something like this

  Get - VM |

  Select Name,@{N='Controller'; E = {(Get-contrôleur SCSI-VM $_ |)} {(Sélectionnez Type-ExpandProperty) - join ' |'}}