List of "reports generated" in groovy

Similar Questions

• How to set the size of text with the report generator

  Hello.

  I'm trying to set the size of the text with the report generator, but I find that I can't do this. Here is an example of the code that I use. Can someone tell me what I'm doing wrong please?

  Thank you, Alec

  

  I was generation from a word template.

  I hacked my version of the Toolbox to give me maunal indicator control "model? He had obtained his permenatly self stuck on "T". I exposed this flag outside the API, so I can control under certain weather conditions I may or may not use the model police.

  Does anyone know how to use this toolkit, or I did the right thing?

  Cheers, Alec

• date of reading of hurt to excel using the report generator tool kit

  Hello
  Im trying to read a date from an excel worksheet by using the report generator tool. I talked about this http://digital.ni.com/public.nsf/allkb/01B026BEB54E3414862571B600618827 KB and it works... kind of.

  My dates are all read next 4 years and 1 day. Can't really understand why?

  Any ideas would be appreciated!

  Thank you
  David

  The format of the time in LabVIEW is distinguished by the time format in Excel. If you simply convert the timestamp cluster double
  and paste that data into Excel, it won't make sense. This is because the Excel format is based on the number of days
  Since January 1, 1900. The time of LabVIEW is based on the number of seconds elapsed since January 1, 1904. Converts this vi
  LabVIEW to Excel time time. reverses the logic of switch from excel to labview

• Mobile version Hyperion Planning - list empty reports

  Hi, Experts!

  I have test the mobile version of Hyperion Planning (11.1.2.3.500). I ' v has everything, but not reports,

  I tried different ways: accorder grant permissions in Expolrer, copy reports to users, log in as administrator.

  but the list of reports is always empty!

  There is no "no Reports" tab as 'Tablet access'... He has only lists of tasks, forms and approvals.

  Any body explain what can I do to get access in mobile planning reports?

  

  John,

  I raised a SR with Oracle long back and they mentioned that the reports should be instantaneous.

  Comments here

  launch of dynamic reports in FUSE/Tablet UI is not supported in 11.1.2.3.500. Only a snapshot of report/book can be launched from the FUSE mode.

  http://docs.Oracle.com/CD/E40248_01/EPM.1112/planning_admin_11123500.PDF

  Excerpt:

  Considerations when using the easy UI for Tablet

  -A PDF reader is required to view reports on the tablet. Oracle

  recommend

  Adobe's PDF Viewer, but it can be opened in Kindle or Polaris Office on

  Android devices or a similar app on the iPad.

  -Reports are snapshots of the data. Alternatively, you can make snapshots of the work which

  contain several reports and report snapshots. To display a new data set,

  you

  create a new snapshot of the reports. Snapshots are static and show

  all the

  pages of the report. Reports can be modified to display the Page/POV or row and

  column size limitations.

  .

  Thank you

  Anjum

• Error in the register EPM system in the validation report generated

  I installed and configured EMP 122 and I used the IgnoreChecks command - validate.bat subsequently to validate installation and configuration but I see some errors in the report generated in red color
  I see that as a result of errors in the validation report generated
  
  REG failed: next register numbers are:
  PUBLISHER_WEBAPP (id: 11b68432ce38a71bS10ba34fd13ed1f99950S7f56):
  property 'serverName' failed
  property 'validationContext' failed
  Failed 'APP_SERVER' child
  
  BIEE_WEBAPP (id: 11b68432ce38a71bS10ba34fd13ed1f99950S7f49):
  property 'serverName' failed
  property 'validationContext' failed
  Failed 'APP_SERVER' child
  Error: Failed to execute of Checker.
  Recommended action: check the logs of validation for exception details.

  I'll ask again :), have not selected the "Connection to Oracle BI and editor Configuration" option in the Setup program at any time? I thought just maybe you configured and that you didn't need to, and that's why the configuration is captured by the validation.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Right side of the text in the report are cut during report generated in PDF format

  Right side of the text in the report are cut during report generated in PDF format.
  In the report layout text is FLUSH JUSTIFIED. Text block is the same size as the outer frame.
  When the report is generated in PDF format, text is only JUSTIFIED to the LEFT and to the right looks like cut. Text beyond frame is invisible.
  But when I text selection in the PDF report that all the text is selected and I can copy and paste this text into any editor.
  What is a cause of this error and how can I solve this problem? In my view, there is error in report engine.
  Report Server Version: 10.1.2.3.0
  
  See photo. [http://1.bp.blogspot.com/_tSW8j23gT08/TKXn84zyRMI/AAAAAAAAAGE/KkNibanTSao/s1600/report_error.JPG]

  Don't know what your operating system and it could make a difference. If you're on Unix/Linux, try changing the uifont.ali file. (make a backup first!).

  Here is an example of the changes that I made to correct a similar problem:

  # Mapping of MS Windows

  #Arial = helvetica
  # 'Courier New' = courier
  # "Times New Roman" = times
  #Modern = helvetica
  #"MS Sans Serif" = helvetica
  # "MS Serif" = times
  # "Small fonts" = helvetica

  #Arial = 'arial.ttf '.
  Arial = helvetica.8
  "Courier New" = courier.9
  Arial.12 = helvetica.8
  #helvetica.12.Bold = helvetica.9
  #ArilMT is helvetica.9
  # "Albertus Extra Bold" = helvetica.9

  [PDF]

  #Arial = courier
  #arial = courier

  # Support for the languages of the far East:

  #itcadvantgardegothic = arial
  # "ITC front guard Gothic" = arial
  #itcadvantgardegothic = arial
  # "ITC Avant Garde Gothic" = Arial
  # changed to courier 06-25-2009
  itcadvantgardegothic = Helvetica
  #itcadvantgardegothic = arial
  "ITC Avant Garde Gothic" = Helvetica.11

  # Required
  #itcadvantgardegothic = arial
  # "ITC Avant Garde Gothic" = Arial

  [PDF:Subset]

  #times = "times.ttf".
  #courier = "cour.ttf.
  #helvetica = 'arial.ttf '.
  #arial = 'arial.ttf '.
  #helvetica = 'arial.ttf '.
  # 'Avant Garde' = 'arial.ttf '.
  #arial = 'arial.ttf '.
  #helvetica = 'arial.ttf '.
  #arial = 'arial.ttf '.
  #itcadvantgardegothic = 'arial.ttf '.
  #helvetica = 'arial.ttf '.
  #courier = "cour.ttf.

• The reports generated interactive visuals: why some data link is unavailable?

  I want to enjoy the interactive generated visual report available in the electronic dashboard and share with the rest of my team, but some connection information is not displayed. Total number of clicks and the percentage of clicks appear in sections of header and footer. But anywhere in the body of the email where there is a link, the report indicates "0 clicks, 0.00% of total clicks." I pulled a report of broken link, so I can prove that the links in the email are, in fact, have clicked on, but I am at a loss as to why the data is not displayed in the Visual click per report.

  We use for a follow-up query strings, and all the links in our emails are redirect links... with the Eloqua coding. Could one of these have an impact on the reports?  (I'm on E9)

  Does anyone else have this problem? Your help and your insight is greatly appreciated.

  Thank you

  Julia Teske

  Specialist in marketing automation

  [email protected]

  Hi Julia,

  If you insert dynamic values in the URL (for example, the merger in e-mail as a query string) and then the Visual click by report will not work. Visual click compared scans each link in the email and then trys to match the history of clickstream data against these URLS. If it finds a match, it fills the click Visual. If he can't do it for some reason (for example the link in the email www.google.com?email=Email_Address and the final URL sent to contact after mergers is [email protected] ) then unfortunately, he can't fill these data in the report.

  The clicks link email fault report is the best choice in these situations, because it is not affected by the above question (as it is just a list of URLS from track data, it does validate not against the content of the email in Eloqua).

• List of reports

  Is there an easy way to generate a list of all reports published in BI? Pls I would like to know if anyone has done a similar exercise

  Generate a report of the Catalog Manager. See the link below if you want to know the steps:
  http://obiee911.blogspot.com/2012/05/How-to-find-RPD-column-usage-in-bi.html

  FYI, you can even find physical columns used in each report.

• Frequency minimum step length and duration list minimum for the frequency lists in the generator of signals from NI 5406

  Hello

  We need power RF amplifier with a function generator to create plasma in an ion source. The signal pulse duration must be 1ms long, repeated twice per second.

  Today, we work in the following way: we spend the RF with f0 (aprox 1,995 MHz) frequency. After 20, we send a trigger signal passing frequency f1 (aprox 2.005 MHz).  We keep this frequency for the rest of the pulse.  However, the plasma that we generate is not 'constant' or stable during the whole impulse. If we smoothly change the frequency during the pulse we could improve.

  We would like to do: use the frequency sweep: rather than use this frequency hopping, we would like to move smoothly f0 f1 (frequency scanning). Then F1 to f2.

  As we have a PXI for data analysis, we believe using the arbitrary function generator of NOR: 5406 of NEITHER allowing the frequency sweep. However, in the book loads, it is not very clear, and I have a few questions:

  -We can create a "list of frequencies. In the site OR below, it shows that the "minimum of Step' is 1.28us, which would be ok for us (I understand that the"minimum duration of Step"is the minimum time between 2 frequencies). However, the manual of the device "NI PXI/PCI-5402/5406 specifications" said the frequency list has a time step of 1 ms to 21s. What is the good?

  -It is also said that the "duration of minimum list" is 1 s. For us, need us a shorter list that 0.5 seconds (we need to repeat the same pulse twice per second.). Is it possible to do what we want?

  -At the end of the day, we would like to implement a control loop which modifies the list of frequencies in real-time.

  http://zone.NI.com/reference/en-XX/help/370524L-01/nisignal_generators_help/features_by_device_smc/

  Thanks for your help.
  Best regards
  Jose.

  Hi Jose,

  You're right about the inconsistencies of the documentation. The minimum step was of 1 ms, but was changed to 1.28 µs to driver version 2.6. The help document has been modified to reflect that, but the specifications were not. I'll make sure that attaches.

  The length of the minimum list is not listed in the book loads, and the latest version of the help the signal generators OR (driver version 2.9) lists the minimum list than the 1 step length. Aid has changed to the driver version 2.6.1 to clarify that the 1s meant 1 step. I've attached a screenshot of the help of the most recent.

  There is an example that is installed with the NOR-FGEN driver called "Fgen Sweep Generator.vi". I would recommend from this for your application.

  I hope that some of the inconsistencies in our documentation brightened. Please let us know if you have any other questions.

  Elizabeth K.

  Generators of signal produced technical support engineer

• Label chart in the report generator axis

  Hello

  can someone help me with my problem?

  I need to add labels of the graph axis I've done by the Builder of Labview. Is it possible to do?

  I thank very you much.

  Patrik :-)

  I guess you make the graph in Excel.  The LabVIEW Report Generation Toolkit gives you a set of 'hooks' to make an Excel chart - it actually makes an 'object' that has a limited set of formatting options, but is quick and easy to use.  If you need a more detailed field, you're probably better write an Excel macro to generate the Excel data plot, then using LabVIEW for sae data to Excel, and then run this "macro tracing' to make the fantasy plot.

  However, here's how a conspiracy "simple."  The loop For generates data that are plotted (after transposing the data to give a picture of X and an array of Y) with graphic Insert, where I also put the title of the chart.  I then specify a label for the X ("category") and value axes, ('Value') with the result the plot shown below.

  

  Bob Schor

• Referring XY graph because of report generator when the program is compiled

  I use the simple PDF generator to add a XY Chart Report PDF, same handle is used in an Excel report and works very well. The XY graph appears so fine when the code it running in development mode, when it is run as executable, the chart insert routines fail for lack of FFL *.bmp temp for the chart of 1172. See attachments. Anyone have any idea why the loss of the handle/temp graph error?

  As you say, the error saying that it cannot find the file, which probably means that the file has not been created.

  My guess would be it - you create the chart in the subVIs with the + and control icons (which is probably PDF_Generator.Writer.AddImage.vi) and the VI which is shown in the picture was never his FP posted.

  By default, LV removes the prefix of all the screws enter the EXE file unless he decides he'll need in the public Service. If the FP is removed then the image of the control are not accessible and that would probably prevent the file to be created. To confirm this, the simplest method is to create a node of static property for controls on the front panel. This will force LV to keep the PC when you build the exe.

  If it does not help, then you know exactly where the BMP file is supposed to be generated and see if you can connect a mistake there.

• Creating a line chart PDF-report generator model with APEX

  Hi all

  I would like to create a PDF report with a chart using Apex and the generator plugin model for Word.

  My Select statement, which I use as the report (shared components) query returns the data in the following way:

  Date Description amount

  ----                 -----                -----

  01.01.2014 has 1.2

  02.01.2014 has 1.3

  03.01.2014 has 0.5

  01.01.2014 B 0.3

  02.01.2014 B 4.5

  03.01.2014 B 4.8

  The XML document obtained, which creates the APEX, is:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < DOCUMENT >

  < DATE > 08/10/2014 < / DATE >

  ADMIN < user_name > < / username >

  < > 102 APP_ID < / APP_ID >

  < APP_NAME > Oracle APEX AppBuilder < / APP_NAME >

  < /Title > < TITLE > graph

  < REGION ID = "0" >

  rowset <>

  < ROW >

  < date > < / Date >

  < DESCRIPTION > < / DESCRIPTION >

  < value > < / value >

  < / ROW >

  < / LINES >

  < / REGION >

  < / DOCUMENT >

  What I would like to have is a line graph with:

  • Date on the x-axis
  • Length of value on axis y
  • for each Description of Type single line

  The names and numbers of the discription varies a lot (as well as the values that they are related to the Description and date).

  What I tried:

  A lot, trying to make this work for 4 weeks, on and outside.

  Tried to edit the chart XML in Word, edit the SQL query, pivot the result SQL to get the Descriptions as columns and of course a lot of Googling.

  Please let me know if you have any advice.

  Thanks in advance,

  Thomas

  Oracle DB: 11g

  ApEx Version: 4.2.5.00.08

  Last Oracle BI Builder Plugin for Word template

  Finally found my Solution. What I was looking for is:

• Snapshot report - generates an output of white

  Hi all

  I hope someone can help me with a script PowerCLI for snapshot report that can extract the report to a csv file.

  After you run the script to schedule tasks/power Cli both, it generates an empty output in csv.

  
  

  $vcenters = "Test91.EA.com".

  {foreach ($vcenter to $vcenters)

  to connect-viserver $vcenter

  Get - vm | Get-snapshot | Select the virtual machine, sizegb, created, description, name | D:\snapshot-Reminder\Snapshot.CSV Export-CSV-add - notype

  disconnect-viserver $vcenter - confirm: $false

  }

  $mailto = ' [email protected] '

  $mailfrom = ' [email protected] '

  $mailsubject = "WeeklySnapshot_Report".

  $smtpserver = "smtpe2k.us.EA.com".

  $mailbody = 'instant recall '.

  $attach1 = "D:\Snapshot-Reminder\Snapshot.csv".

  Send-MailMessage-to $mailto - to $mailfrom - subject $mailsubject - SmtpServer $smtpserver - body $mailbody - $attach1 accessories

  Thank you

  vm2014

  There is nothing in the CSV file?

  Are you sure that there is present snapshots?

  Can you try to connect and run the Get - VM | Get-Snapshot... line from the PowerCLI prompt interactively.

  And look for any errors

• Code temporal list/table to generate the sequence?

  I have a list of time codes based on a sequence of clips, essentially all of the dailies less certain camera wobbles.

  I want to generate a new sequence of this temporal/worksheet code listing without having to manually change. Any ideas?

  Once you could just drill timecodes in FCP7 and the system would recover the band/clips using the list of timecode.

  Thank you

  Jay

  It's the bit by hand as I try to avoid.

  We get that.  I don't think it's possible.

• How can I get the items checked in a list that is generated automatically?

  I'm still pretty new a CF and could use very little help. I try to get every item that is checked a page that generates the list automatically from a query and get the text textbox associated with it. For example:

                      <!--- Start Get Data Hierarchy List--->
                                <cfquery datasource="MyDatasource" name="qry_GetData">
                                          SELECT C.taxonomy_id, C.lvl, C.taxonomy_name, C.taxonomy_tree, C.taxonomy_guid, C.taxonomy_standard_name
                                          FROM dbo.taxonomy AS P
                                          JOIN dbo.taxonomy AS C
                                                    ON P.taxonomy_id = 21
                                                    AND C.hid.IsDescendantOf(P.hid) = 1
                                                    AND C.lvl = 3
                                </cfquery>
                      <!--- Start Get Data Hierarchy List--->
  

  								< cfloop query = "qry_GetData" >
  									< input type = "checkbox" name = "" cbox_PE_SelTax #taxonomy_id # "value =" #taxonomy_name #"> < font size ="4"color = '3399FF' > #taxonomy_name # < / font >"
  									< br / >
  									"- Details of ' experience with #taxonomy_name #: < input name =" "tbox_PE_SelTax #taxonomy_id #" id = "tbox_PE_SelTax #taxonomy_id #" size = "50%" >
  									< br / >
  									< br / >
  								< / cfloop >

  If you want just the names, you can let the value of the checkboxes the value taxonomy_name. In your action page (intrusion via CFMAIL, whatever) you could just output it:

  Taxonomies: #form.cbox_PE_SelTax #.

  Dave Watts, CTO, Fig Leaf Software