List of stores of data for each host

Similar Questions

• PDF output for each host

  I would like to create a PDF report in Foglight for each host showing the memory and the CPU. Is it possible that Foglight run the report so that each host will be created in a single PDF? Currently all the output is contained in a single PDF file when the report is run.

  It is certainly technically possible. Many reports out-of-the-box take a list of hosts as input.

  There is no reason that you can specify a list of a single host as the entry in the report.

  If you drag and drop a host on a Reportal, you can select a number of views which include memory and CPU usage. You can configure and schedule a number of these reports, one for each host.

  But I have to wonder about the use case. Do you want to generate a large number of PDF files, each of which contains only three pieces of information: host name, memory usage and CPU usage?

  Kind regards

  Brian Wheeldon

• Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  If you can get hands on with the ID of blog post that you can list the tags assigned to this post particularly blog using module_data. It would be only possible with the new BC. Active following rendering engine. Here are some resources to point you in the right direction: how to activate the BC. Next - http://docs.businesscatalyst.com/developers/liquid/introduction-to-liquid#enable how to use module_data - odule_data http://docs.businesscatalyst.com/developers/liquid/consuming-apis-in-the-front-end-using-m install app BC API discovered to get you started on the syntax - http://docs.businesscatalyst.com/developers/apps/bc-api-discovery module data that lists the tags assigned to a blog post looks like this: {module_data = 'blogposts' version = "v3" field resource = subresource 'tag' = "tags" resourceId = collection "303870" = "myData"} resourceId is the blog ID to render tags for. Hope this helps, Mihai

• count the number of targets, devices and paths by hba for each host with powercli 5.5

  Hi all

  I'm writing this Question again in the community, was not able to found the answer I was looking for in the nets:

  https://communities.VMware.com/thread/516226?start=0 & tstart = 0

  https://communities.VMware.com/thread/293531

  I went through the scripts provided in the community, but seems that t not work on powercli 5.5.

  ///

  # The target account, devices and paths for each host

  Get-Cluster $cluster | Get-VMHost | Sort-Object-property name. {ForEach-Object

  $VMHost = $_

  $VMHost | Get-VMHostHba-type FibreChannel | Sort-Object-property device | {ForEach-Object

  $VMHostHba = $_

  $ScsiLun = $VMHostHba | Get-ScsiLun

  If {($ScsiLun)

  $ScsiLunPath = $ScsiLun | Get-ScsiLunPath | `

  Where-Object {$_.} Name - like "$($VMHostHba.Device) *"} ".

  $Targets = ($ScsiLunPath |) »

  Group-object - property SanID | Measure - Object). County

  $Devices = ($ScsiLun |) Measure - Object). County

  $Paths = ($ScsiLunPath |) Measure - Object). County

  }

  Else {}

  $Targets = 0

  $Devices = 0

  $Paths = 0

  }

  $Report = "" | Select-Object - property VMHost, HBA, target devices, paths

  $Report.VMHost = $VMHost.Name

  $Report.HBA = $VMHostHba.Device

  $Report.Targets = $Targets

  $Report.Devices = $Devices

  $Report.Paths = $Paths

  $Report

  }

  }

  ///

  I went through the script LucD posted below: but it's not exactly what I'm looking for.

  LucD : can you please change the same for me please.   to count the number of paths per hba for each host with powercli 5.5, devices and targets.

  //

  $esx = get-VMHost < host name >

  foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}

  $target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal

  $luns = get-ScsiLun - Hba $hba - LunType 'disk '.

  $nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum

  Write-Host $hba. Device ' target: ' $target. County "devices:" $luns. County ' path: ' $nrPaths

  }

  //

  I'll be grateful for any help.

  Tarun Gupta

  Try something like this

  {foreach ($esx in Get-VMHost)

  foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}

  $target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal

  $luns = get-ScsiLun - Hba $hba - LunType "disk" - ErrorAction SilentlyContinue

  $nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum

  $props [ordered] = @ {}

  VMHost = $esx.name

  HBA = $hba. Name

  Target = $target. County

  Device = $luns. County

  Path = $nrPaths

  }

  New-object PSObject-property $props

  }

  }

• What is a difference between 'Logical processors' and 'logical processors for each host?

  Hi all!

  In the official document VMware "vsphere-51-configuration-maxima" or "vsphere-55-configuration - maximums.pdf" in the section "ESXi host maximum rates------Maximums calculation" exists in the elements:

  "Maximum CPU------logical CPU for each host ' (vSphere 5.1: 160;)   vSphere 5.5: 320)

  and

  "Machine virtual maximums------virtual CPU by host ' (vSphere 5.1: 2048;)    vSphere 5.5: 4096)

  Question: what is the difference between the two?

  And a more complex thing to maximum rates:

  Virtual machines per host: 512

  Number of hosts per cluster: 32

  Therefore, the cluster may be Virtual Machines (maximum): 521 * 32 = 16384

  But in the document, we have only 4000 VMs in maximum.

  Why?

  Thank you

  Ramirez,

  I understand your question as difference between 1. logic virtual CPU vs / by the hosts and 2. cluster/host Max County VM.

  Consider the case below;

  2 servers ESXi - 20 mV

  ESXi taken 1-4, 2 cores / socket

  ESXi 2-8 Sockets, 2 cores / socket

  Now here number of CPU logic-(4 x 2) + (8 x 2) = 24

  20 virtual machines - 2 jacks, 2 core / socket

  Virtual CPU count - 20 x (2 * 2) = 80

  Hope your first confusion is clear now.

  And a more complex thing to maximum rates:

  Virtual machines per host: 512

  Number of hosts per cluster: 32

  Therefore, the cluster may be Virtual Machines (maximum): 521 * 32 = 16384

  But in the document, we have only 4000 VMs in maximum.

  Why?

  This means that even if you have 32 Guest and each host can accommodate 512 VMs each the maximum number of virtual machines per cluster may not exceed 4000. And it does not mean that you can have a maximum of VMS (512 * 32).

  ~ dGeorgey

• PowerCLI - there cmdlets to browse the store of data for files/directories and their creation?

  Hello

  PowerCLI - there cmdlets to browse the store of data for files/directories and their creation?

  If Yes, can you please let me know.

  I took a glance at the reference of the cmdlet, but can not find...

  
  Kind regards

  Dreamer

  You can use the data store provider.

  It is documented in the vSphere PowerCLI Administration Guide that was installed with PowerCLI.

• How to get the status of data for each virtual [identify overprovisioning] computer store?

  Hi people,

  Could help me is it you please in the generation of report of VM and its data store location (data stocker store free space, size set up and operation). ?

  Ideally, it should be like this:

  The virtual computer name. Name of the data store. Size of the data store. Total configured data store size

  Thank you

  The following script adds the ProvisionedSpaceGB property to the output of the script of Luke:

  Get-VM | ForEach-Object {
    if ($_)
    {
      $vm = $_
      $vm | Get-Datastore | ForEach-Object {
        if ($_)
        {
          $Datastore = $_
          "" | Select-Object -Property @{N="VM name";E={$vm.Name}},
          @{N="ProvisionedSpaceGB";E={$vm.ProvisionedSpaceGB}},
          @{N="Datastore Name";E={$Datastore.Name}},
          @{N="Datastore Size (GB)";E={[Math]::Round($Datastore.CapacityMB/1KB,0)}},
          @{N="Datastore Total Provisioned size (GB)";E={[Math]::Round(($Datastore.CapacityMB-$Datastore.FreeSpaceMB)/1KB+$Datastore.ExtensionData.Summary.Uncommitted/1GB,0)}},
          @{N="Datastore Used Space (GB)";E={[Math]::Round(($Datastore.CapacityMB-$Datastore.FreeSpaceMB)/1KB,0)}}
        }
      }
    }
  }
  

• How can I register all of the VMX files found in a list of stores of data with new names

  Hello-

  I'm trying to find a way to search through a given list of data and each discover a warehouse. VMX file, add this machine in the inventory I want to prepend the name of the machine as something different. That is to say, instead of "Machine1", I wish it were registetred as "auto-Computer1.  So, imagine I have an empty data center with 4 warehouses of data stored in a table $arrDatastoreToInclude.  I want to loop through each of these data stores and add all the VMX files I found back in the inventory.

  I know that I can use the following to get data warehouses I want:

  $dsindatacenter = get-data center $DataCenterName | Get-Datastore? | {$arrDatastoreToInclude - contains $_.} Name}

  But I have no idea how to analyze these data stores for the VMX files and what command to add them in the inventory.  Can anyone help?

  Try the following, it is based on the script of the position that Robert mentioned.

  You will need to provide a file (in $VMFolder) where unregistered virtual machines will be stored.

  The Set-VM cmdlet will take care of the rename.

  $DatacenterName = "MyDatacenter" $arrDatastoreToInclude = "DS1","DS2","DS3","DS4"
  
  $dc = Get-DataCenter $DataCenterName $dsindatacenter =  Get-Datastore -Datacenter $dc | ?{$arrDatastoreToInclude -contains $_.Name}
  
  $VMFolder = "MyFolder"
  $ESXHost = Get-VMHost -Location $dc | select -First 1
  foreach($Datastore in $dsindatacenter) {
      # Collect .vmx paths of registered VMs on the datastore     $registered = @{}
      Get-VM -Datastore $Datastore | %{$_.Extensiondata.LayoutEx.File | where {$_.Name -like "*.vmx"} | %{$registered.Add($_.Name,$true)}}
  
     # Set up Search for .VMX Files in Datastore    New-PSDrive -Name TgtDS -Location $Datastore -PSProvider VimDatastore -Root '\' | Out-Null    $unregistered = @(Get-ChildItem -Path TgtDS: -Recurse |         where {$_.FolderPath -notmatch ".snapshot" -and $_.Name -like "*.vmx" -and !$registered.ContainsKey($_.Name)})
      Remove-PSDrive -Name TgtDS
     #Register all .vmx Files as VMs on the datastore   foreach($VMXFile in $unregistered) {
          New-VM -VMFilePath $VMXFile.DatastoreFullPath -VMHost $ESXHost -Location $VMFolder |
          Set-VM -Name ("Auto-" + $_.Name)
     }
  }
  

  Unregistered virtual machines will be saved with Displayname that is present in the VMX file.

  If this would cause a conflict with VM already registered, you can use the Name of the cmdlet New-VM parameter

• Contains a drop-down list of this poplulates info for each State?

  I created a drop down list of the 50 States of the United States. I need isolate only the information that is specific to each State in some way that it presents when a user selects the name of the State from the drop-down list. The information that will be displayed for each State can be a company name and address, or several different names/places. This should appear on a page in the web site of the client.

  So I have two questions:

  (1) can I create this list of drop function in LiveCycle for web utility?

  (2) if so, I don't know where and how to start with hidden content or how it synchronize the State sectionals. Can someone point me in the right direction on how to accomplish this task?

  Thanks in advance.

  You can customize the table for your need. And the data can be in any order. It appears in the order by which you call upon the table.

  Kind regards

  Nith

• How to access a column value in a Select list in a tabular presentation for each line

  Hello

  Environment: Using Oracle APEX v4.2.1 on an Oracle 11 g 2 DB

  In a tabular presentation using the following example query, i.e.:

  select
  "EMPNO",
  "EMPNO" EMPNO_DISPLAY,
  "ENAME",
  "HIREDATE",
  "SAL",
  "DEPTNO",
  "MY_LOV"
  from"#OWNER#"."EMP"
  
  

  I need access to every line of my sub form of table, the EMPNO of this line value, within a list of selection (query based LOV) in the column "MY_LOV."

  So, basically, the MY_LOV column in my table presentation, would be a list of selection (query based LOV) where MY_EMPNO =: EMPNO (first column in the select statement above), for each line of the tabular presentation.

  With the help of a picture ( Tom's Blog ) and assuming 'Deptno' column here is actually my new column, i.e. "MY_LOV, I want to know how this list of selection based on lov query would be able to access each EMPNO down in the form of tables, i.e. 7839, 7698, 7782 etc.?

  

  Any help would be appreciated.

  Thank you.

  Tony.

  Hi Tony,.

  Take a look at the API APEX_ITEM for LOV

  http://docs.Oracle.com/CD/E37097_01/doc/doc.42/e35127/apex_item.htm#AEAPI208

  Kind regards

  Brad

• Many storage spaces and data for each quarter of the year files

  Hello

  I am junior DBA and I have a question about tablespace partitioning or data file sharing.

  I have a database of 10g in many storage spaces, for example:

  KER_DATA_2009_Q1

  KER_DATA_2009_Q2

  KER_DATA_2009_Q3

  KER_DATA_2009_Q4

  KER_INDX_2009_Q1

  KER_INDX_2009_Q2

  KER_INDX_2009_Q3

  KER_INDX_2009_Q4

  There is also a data file for each tablespace that is mentioned.

  But for this year 2013, only two big storage space I can get one and data KER_DATA, KER_INDX files.

  All tables and indexes in the whole database are KER_DATA, KER_INDX, tablespaces.

  I don't know any cut in two storage spaces and means of data files. Is this something like tablespace partitioning? This can be done automatically or someone needed to do it manually on the end of each quarter?

  This should be done to improve performance, several small files data instead a large?

  Can some admin explain this to me?

  The reason for this separation of database/tablespace was partitioning. There are a lot of tables partitioned by date column, and there are partitions for each quarter of the year. There are tablespace with a data file for each quarter (partition).

• Create id, id of the update with the date for each record

  Hello
  
  Please give me brief idea or document for this concept:
  
  I need to create id, date, update id, updated for each record inserted or updated in the database (multiple tables).
  
  (1) how the user id can be obtained?
  (2) is it better if I use views instead of tables for this?
  (3) is it possible for each record?
  
  Please show me the full scenario. a piece of code can also be useful.
  
  Thanks in advance.

  http://psoug.org/reference/table_trigger.html

  Concerning
  Biju

• Cannot delete items in documents and data for each application

  I want to delete unnecessary files in several applications under general > use storage and iCloud > manage storage, but the section documents and data for the respective applications will not operate.

  I have it several times but it doesn't work.

  Can someone help me?

  Thanks in advance

  Omari says:

  I want to delete unnecessary files in several applications under general > use storage and iCloud > manage storage, but the section documents and data for the respective applications will not operate.

  I have it several times but it doesn't work.

  Explain what you do and what happens when you try to delete the data.

• start date for each week of the month

  Dear members
  
  How can I find double, the start date of each week of the month in a year.
  beginning of the week is the word "Monday".
  
  
  year month week day date
  ----------------------------------------------------------------------------------------
  Monday, January 3, 2011 JAN 1, 2011
  2011 2 JAN Monday, January 10, 2011
  Monday, January 17, 2011 January 3, 2011
  JAN 4 2011 on Monday, January 24, 2011
  2011 to January 5 Monday, January 31, 2011
  
  
  Thank you
  
  teefu

  Hello

  You can use this:

  with t as  (select to_date ('01/01/2011', 'DD/MM/YYYY') start_date from dual)
  select  date_calc
  from (
          select  start_date,
                  (level-1)*7+trunc (start_date , 'D')+1   as date_calc
          from t
          connect by level <=53)
  where trunc(date_calc,'YYYY')=trunc(start_date,'YYYY') ;
  

  Kind regards
  Sylvie

• Show active paths by the data store for each host

  I'm looking for a PowerCLI script that displays by cluster, by ESXi host how active paths has a data store. The output should look like:

  Paths of Active host data store

  VMFS-01 ESXi01 2

  Thank you

  Ivo

  Try this one, it shows the actual number of "active" paths by the data store.

  foreach($esx in Get-VMHost){  $hss = Get-View $esx.Extensiondata.ConfigManager.StorageSystem
  
    $lunTab = @{}  $hss.StorageDeviceInfo.ScsiLun | %{    $lunTab.Add($_.Key,$_.CanonicalName)  }  $pathTab = @{}  $hss.StorageDeviceInfo.MultipathInfo.Lun | %{    $pathState = @($_.Path | Group-Object -Property PathState |    where {$_.Name -eq "active"} | Select -ExpandProperty Group)
  
      if($pathTab.ContainsKey($_.Lun)){      $pathTab[$_.Lun] += $pathState.Count    }    else{      $pathTab.Add($lunTab[$_.Lun],$pathState.Count)    }  }
  
    foreach($mount in ($hss.FileSystemVolumeInfo.MountInfo | where {$_.Volume.Type -eq "VMFS"})){    $mount.Volume.Extent |    Select @{N="VMHost";E={$esx.Name}},      @{N="Datastore";E={$mount.Volume.Name}},      @{N="LUN";E={$_.DiskName}},      @{N="Active Paths";E={$pathTab[$_.DiskName]}}  } }