List of total size of all the vmdk on a virtual machine in the UK

Similar Questions

• The "64K limit for the total size of all the values in a registry key" rule - not more valid?

  http://support.Microsoft.com/kb/256986
  - more information -> Description of the register article, it is said:

  Note There is a 64K limit for the total size of all values of a key.

  I don't see that this rule can be valid any longer?

  In my Windows 7 SP1 x 64, I have at least 15 keys with values that add up to more than 65 535 bytes.
  In fact, I have more than 15 values (strings, binary and multiple channels) which, by themselves, have some sizes larger than 65 535 bytes.

  Here are a few examples.

  Native Instruments Kontakt 5 installation;
  [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\B354255567BB3E5479D39FE554E87D08\Features]
  -This key contains 91 string values, where 90 are under 250 bytes, but the last of them. "FE923650A" has a length of 67 401 bytes of data.

  Autodesk 3ds Max Design 2011 installation;
  [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\FFECC85A69B39040E99BEA59BF78957B\Features]
  -This key contains 14 values of string, ranging from 1 (the 'P' value) byte to 75 426 bytes (value "max7"), bringing the total size of 116 944 bytes.

  Installation of Windows 7 by default.
  [HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\AppCompatCache]
  -This key contains a binary value of monkey 'AppCompatCache' that has a length of 259 768 bytes of data.

  Another installation of Windows 7 by default;
  [HKLM NT\CurrentVersion\Perflib\CurrentLanguage]
  -This key contains 2 channels multiple values: 'Meter' (87 950 bytes) and 'Help' (418 345 bytes), a total of 506 295 bytes for this key.

  Finally, once again Windows 7 installation by default.
  [HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage2]
  -This key contains 3 DWORD and 5 binary values with the value "ProgramsCache" being the most important of all with its 795 404 bytes
  either a sum of 807 639 bytes for this key.

  Hello

  Check this box:

  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/thread/84944bfe-4bf5-47cd-93ac-4d09076fcd40

  This problem can also be published on MSDN Forum.

• Data store sizes do not correspond to the sizes used all the vm

  Hey guys, I'm new in Vmware and I have a background of storage and I wonder if its correct what I see when I compare the total size of all the stores of data vs the 'space used' totals of all VMs running on these data stores.

  I see a total of 139 to on data warehouses with 33 to free space and when I add the vm used all space I have a totall TB 138. It's the size of all data stores!

  This seems not very accurate for me, I expect the total space used much lower. All the vm uses eager reset thick space.

  I hope someone can explain or confirm that they see similar things?

  For used space I exported the list of all the vm XL, cut in two the column space to separate the numbers from the gb / tb, changed all amounts of GB space and have XL add up the sum of all spaces.

  Hey MKguy, it was indeed your option 1, the RDM

  a command simple cli: Get - VM | Get-hard drive - Disktype "RawPhysical", "RawVirtual" | Select name, DiskType, ScsicannonicalName, DeviceName, Parent, CapacityGB

  has given numbers for all of the ROW and that's the difference between data warehouses, I have seen and all the used vm space :-)

  Thank you very much for your help, much appreciated!

• How to change the size of all the labels?

  Yo! I just wiped my hard drive and put all the Adobe stuff to my laptop, but the graph shows suck. All labels at the top and to the right and all the symbols on the left are fuc * ing huge, that the work area is so tiny... I don't know how to change this, I'm going crazy!

  

  Acutally, it is difficult to see on this screenshot, but all "Datei", "Bearbeiten" labels and so son should be much smaller (say 30% of actual size) - also all the symbols should be...

  Someone at - it an idea?

  Thank you very much!

  Change your Interface of Photoshop preferences and make sure that your Photoshop UI scaling is set to 100%, not 200% or Auto...

  Wash you mouth with SOAP.

  

• HOWTO delete a VMDK to a virtual machine without actually deleting the vmdk disk file?

  How to remove a file VMDK to a virtual machine without actually deleting the vmdk disk file?

  Details:

  My perl script, I need to temporarily remove a vmdk to a virtual machine file. However I do not want the vmdk file should be removed from the virtual machine. For example, the gui vsphere provides this option to delete a virtual disk without deleting the virtual disk from the disk files.

  In my script, I use the ReconfigVM_Task to do this. This does the job, but also removes the vmdk file. How can ensure me that the vmdk file will not delete the disk?

  The code snippet is something are:

  My $devspec = VirtualDeviceConfigSpec-> new)

  device = > $device,

  #device to delete above:

  operation = > VirtualDeviceConfigSpecOperation-> new ('remove'));

  Push (@$ devspec_list, $devspec);

  My $config_spec = VirtualMachineConfigSpec-> new)

  deviceChange = > $devspec_list

  );

  my $task = $template_view-> ReconfigVM_Task (spec = > $config_spec);

  would really appreciate your help

  s

  Take a look at this script: vmdkManagement.pl

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Total size of all columns

  Hello
  
  I created a table as below
  
  create table my_tab (no number (10), name varchar2 (20));
  
  Now I need to get the total size of this table
  IE no size is 10
  name size is 20
  
  total is 30
  
  Thanks for giving me a query to get the total size as 30.
  
  Thank you
  Oracle

  It is not the way to find the size of the table or any object in the database, you cannot get assuming or by calculation size data type. Here it is the query to get the size of the object in the database.

  select segment_name
  ,      bytes "SIZE_BYTES"
  ,      ceil(bytes / 1024 / 1024) "SIZE_MB"
  from   dba_segments
  where  segment_name like '&obj_name'
  /
  

  Published by: darkStargate on January 5, 2012 17:03

• List option Select to return all the options

  Hello
  
  I created a search form that includes an item called 'AccountType '. This element is a list that is filled by a recordset containing various Types of accounts. The user can select an account type to display data based on their selection. However, I want to include a select option that returns all records of any type of account. List box is...
  
  < select name = 'AccountType' id = 'AccountType' >
  < option value = "" > all Types of accounts < / option >
  < cfoutput query = "rsAccountType" >
  < option value = "#rsAccountType.AccountTypeId #" > #rsAccountType.AccountType # < / option >
  < / cfoutput >
  < / select >
  
  Now the "Account Types all the ' option is an empty string, as you can see above that I explored the web and not found the answer. Y at - there some code I can include that make this 'All Types of account' option to return any type of account?
  
  Appreciate any help!
  
  Thank you
  Richard

  Answer right under my nose...

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15746

• List uses disk space for all the servers on a site

  I read http://www.virtualizationadmin.com/articles-tutorials/General-virtualization-articles/use-PowerCLI-quick-stats-part1.html and other information. I've not seen all examples that can identify the disk space actually used for a virtual machine. for example thin servers provisioned and space used by disk...

  There's a good scenario for this need help for vSphere PowerCLI script to report on all the warehouses of thin provisioned

• Edit a VMDK with another virtual machine snapshots?

  I have a virtual machine that has snapshots 4. I want to temporarily detach the boot drive, attach it to a different VM, extend the partition and finally relate to the original virtual machine. Can I attach the original VMDK file, or can I join < name > VM - 00000X.vmdk file?

  You just want to change the size of the partition you want to resize the virtual disks?

  In case you want to resize the virtual disks, you must not have any instant assets! In case you just want to change the partition structure in a virtual disk without changing its size, then use the snapshot active (the last one in the chain).

  Always keep in mind that snapshots are used as a chain, each link in the chain is active!

  André

• How to extend vmdk for several virtual machines?

  Hello!

  I have a 300 + vm on vsphere5.1 and I need to extend the system drive on each of them. Have ideas of how do with powercli? Thank you.

  You can try something like that.

  It will increase the size of 20% vmdk. Note that the virtual computer must be turned off for this.

  Get-VM | Where {$_.PowerState -eq "PoweredOff"} |Get-HardDisk -Name "Hard disk 1" |Set-HardDisk -CapacityGB ([int]($_.CapacityGB * 0.2)) -Confirm:$false -HelperVM $vm
  

  You can find another example in need a script powercli to increase Harddisk1 of virtual machines in a 20 GB file, can anyone give a script.

• Add copied hard disk (VMDK) on a virtual machine

  I'm new to PowerCLI and can't seem to find information on this "new" process

  I'm looking to automate the addition of a cloned hard disk (VMDK) VM (1) to an another VM (2) existing.  I figured out how "Hard drive copy" VM1 VM2 data store, but can't the formula to VM2.

  To copy the disc, I use the following command:

  $vm1 = "name of vm1.

  $vm2 = "name ofthe virtual machine 2 .

  $ds = "datastor" e

  Get-disk hard - VM $vm1 | Where {$_.} CapacityGB - lt 10} | Copy-hard drive - DestinationPath ' [$ds] vm2 $/ $vm2 - 2.vmdk '-Force

  In fact, here is what it looks like:

  Get-disk hard - VM System1. Where {$_.} CapacityGB - lt 10} | Copy-hard drive - DestinationPath "[NFS2] System2/System2 - 2.vmdk '-Force

  MISTLETOE we do today via vCenter is - change the s parameter > Hardware tab > Add > hard drive > use an existing virtual disk > Browse > check the virtual device node (SCSI 0: (x) - and it works.)  I can start VM2 and the Windows operating system works very well and everyone is happy.

  To set the hard drive via PowerCLI, I use the following command:

  New-disk-hard - VM $vm2 - DiskPath "[$ds] $vm2/vm2 $-2.vmdk»

  In fact, here is what it looks like:

  New- hard drive - VM System2 - DiskPath ' [NFS2] System2/System2-2.vmdk '

  When I run the command, I see vCenter 'work' and then error with Incompatible device support specified for the device '0'.  I have ready many forums reporting the error when you perform a RDM or tries to add a secondary SCSI controller, I don't want to do.

  A few things to note:

  Must be on the default 0 (Virtual LSI Logic SAS) SCSI controller

  Virtual device node must be SCSI 0:2 (it would be a third drive on the system)

  The data store is a different data store that the other disks attached to VM2 (discs 1 and 2 are on NFS1, new drive would be on NFS2).

  When I first copy the disc, it indicates the persistence as unknown, do not know if this is a factor. Any help would be appreciated.

  ESXi, 5.0 Update 1 (5.0.0,821926)

  PowerCLI 5.5 Release 2

  Thank you

  SC

  Lol, I'll type slowly

  No, I'm afraid that we cannot change the API, or the coding behind the cmdlet.

  But we can call the APIs directly from PowerCLI, something like this for example

  function add-HD {  param($VMname, $Filename, $Controller)
  
    $dsName = $Filename.Split(']')[0].TrimStart('[')
  
    $vm = (Get-VM $VMname).ExtensionData  $ds = (Get-Datastore -Name $dsName).ExtensionData
  
    foreach($dev in $vm.config.hardware.device){    if ($dev.deviceInfo.label -eq $Controller){      $CntrlKey = $dev.key    }  }  $Unitnumber = 0  $DevKey = 0
  
    foreach($dev in $vm.config.hardware.device){    if ($dev.controllerKey -eq $CntrlKey){      if ($dev.Unitnumber -gt $Unitnumber){$Unitnumber = $dev.Unitnumber}      if ($dev.key -gt $DevKey) {$DevKey = $dev.key}    }  }
  
    $spec = New-Object VMware.Vim.VirtualMachineConfigSpec  $spec.deviceChange = @()  $spec.deviceChange += New-Object VMware.Vim.VirtualDeviceConfigSpec  $spec.deviceChange[0].device = New-Object VMware.Vim.VirtualDisk  $spec.deviceChange[0].device.backing = New-Object VMware.Vim.VirtualDiskFlatVer2BackingInfo  $spec.deviceChange[0].device.backing.datastore = $ds.MoRef  $spec.deviceChange[0].device.backing.fileName = $Filename  $spec.deviceChange[0].device.backing.diskMode = "independent_persistent"  $spec.deviceChange[0].device.key = $DevKey + 1  ## The UnitNUmber SCSIID 7 is reserved for the Controller - so ignore it and skip to 8.  if ($Unitnumber -eq 6) {$Unitnumber = $Unitnumber + 1}  $spec.deviceChange[0].device.unitnumber = $Unitnumber + 1  $spec.deviceChange[0].device.controllerKey = $CntrlKey  $spec.deviceChange[0].operation = "add"  $vm.ReconfigVM_Task($spec)}
  
  Add-HD -VMname "System2" -FileName "[NFS2] System2/System2-2.vmdk" -Controller "SCSI Controller 0"
  

  I created a function called Add - HD, which will do more or less the same thing, just as the cmdlet New-hard drive when it is used with the name parameter file, but instead to call the cmdlet, the function calls the API ReconfigVM_Task directly.

  The downside of this is that we will have to compile the parameter passed to this method.

  In fact, most of the PowerCLI cmdlets do exactly the same thing, they call the API methods.

  You can view these calls when you draw a cmdlet with the tool of Onyx .

• Single VMDK for multiple virtual machines in esx3.5?

  Hello

  Is it possible to use a single VMDK to host several VM in ESX3.5 or is this feature on the way?  I think the vmware view tech that allows you to host multiple virtual machines to a single image and store only the deltas for VMS replca.

  We organize several ts who are about 12 GB per image, and each server is essentially the same.  It would reduce the space if these could be consolidated at the level of vmware.

  Thank you very much.

  What you are referring to the notion of linked Clones, it's something completely different to share a single VMDK.  with linked clones, you actually run mulitple copies of a single Machine.  This fuinctionality is not available in ESX Raw but is a characteristic of Lab Manager and VMware View Premium.

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Tom Howarth

  VMware communities user moderator

  Blog: www.planetvm.net

• How can I change the color and size of all the text in all applications to help the visually impaired?

  My son it is very difficult to make a black text on white background, but he is very good with blue on white. How can I make sure that all text, regardless of the program, etc., shows the text in blue on a white background? We use Vista. Thank you.

  http://www.Vistax64.com/tutorials/83824-color-scheme.html

  http://www.vista4beginners.com/change-window-color-and-appearance

  See if the tutorials above help you with your question.

  http://www.vista4beginners.com/how-to-change-font-size

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-text-on-your-screen-larger-or-smaller

  And cela for the size of the text.

  See you soon.

  Mick Murphy - Microsoft partner

• Hard disk space do not correspond with the size of all the content files!

  In the properties of "my computer", my placeholder is (?) 114 GB
  My files are almost empty!
  If I choose theall files on the hard drive and click Properties, the size is only 50 GB!
  All waste are removed, I ran degfragmatation and my memory Visual option is 'auto '.
  I do not understand why this submission therefore difference between.
  Can you help me please?

  In the properties of "my computer", my placeholder is (?) 114 GB
  My files are almost empty!
  If I choose theall files on the hard drive and click Properties, the size is only 50 GB!
  All waste are removed, I ran degfragmatation and my memory Visual option is 'auto '.
  I do not understand why this submission therefore difference between.
  Can you help me please?

  ... I forgot... my laptop is very recent, almost 15 days...

• How can I reduce the size of all the text and work to accommodate the new size of the document?

  Hello
  I created a brochure to a certain size and realized it was too big. I reduced the size of the page in document format, but now I need to know how to reduce all graphics, text, etc. to a smaller size. Of course, I know that I will still need to move some items around, but I wonder if I can do this without spending and reducing the size of each piece of text, every element, etc. Thank you!

  In fact, as soon as I typed this, I thought about her. Select all items, press and hold the CTRL and SHIFT keys and drag it down to the default size.