List shows the results of unwanted files in Acrobat 9 std.

Similar Questions

• If I click on Favorites and then scroll through the list of favorites, it does not show the entries in each file.

  * Original title: to access Favorites

  If I click on Favorites and then scroll through the list of favorites, it does not show the entries in each file but suddenly close showing the list of favorites. . I use Chrome and it happened all of a sudden. It was functional this morning. All the advice to fix this will be greatly appreciated

  Have you tried the Chrome forum? https://productforums.google.com/forum/#! forum/chrome

• Go to the list of the results of the main sequence in my plugin...

  Hi guys,.

  OK, first post here, but I'm a little stuck. I am writing a plugin model to generate a custom HTML report (my requirement has a very specific layout for the report, which is not at all compatible with the html reports generated by teststand normally). Anyway. I generated all labview code, I want to make the report in the format I need, but I'm really bad at actually get information of teststand in a way that is easier.

  What I want to do is browse through the list of the results of the main sequence in the callback sequence DUT-Done of the sequence of pluging, which is stored in

  Parameters.MainSequenceResult.TS.SequenceCall.ResultList according to the documentation, but how can I really access it as a table I can go? All I have in my list of parameter is a reference to the parameters. MainSequenceResult, and for the life of me I can't work out what to call this knowledge actually just get it into a format that I can then use to browse in a loop "foreach" to get out of these settings.

  I'm on a windows machine and teststand 2014 7.

  Any help you could give would be really appreciated!

  J

  The list of top level result is: Parameters.MainSequenceResult.TS.SequenceCall.ResultList

  To find it, I dragged Parameters.MainSequenceResult in the Watch window to a breakpoint and developed it until I found the list of results.

  The ResultList is a PropertyObject which is an array of containers, so as the methods GetPropertyObjectByOffset and GetNumElements are going to work on that.

• Create a script to list all the .bat and .cmd files with the dir command &

  Hello

  Im trying to create a script that will list all the .bat and .cmd files in a specific folder and add the data to a new file (file.txt) - example below:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat>>desktop\file.txt/OD

  IM able to search the F drive and the list of all the .bat files using a generic parameter, but ideally id like to search for .bat and .cmd files, but whenever I have it try does not work. Any ideas?

  I tried the following:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat,*.cmd>>desktop\file.txt/OD

  Any help is appreciated, the reason for which I need to check all the .bat and .cmd files is to ensure that the scripts on a cluster are all data, so need them all listed in a doc if possible

  Thank you

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for guys official script Forum. Please ask your question in the official Scripting Guys Forum.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

• showing the result of the wrong exit

  Dear all,
  
  I'm just surprised when I run it under instruction using TOAD.
  The database version is 'Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production'
  
  Select employee_number
  of per_all_people_f
  where employee_number like '% _1 '.
  
  Shows the result of the output:
  Employee_number
  00040_1
  001
  00176_1
  01371
  
  I do not understand why the line '001' and '01371' also show. What bugs database for 11 g?
  Appreciate your help.
  
  Best regards
  
  Edwin

  Since the character model you used average

  % = Any pattern
  _ = any character

  the output is correct.

  You try to find lines with underscore in the data?

• Run the .bat file using fileObj.execute () showing the result by completely removing the lines of code in extend script?

  Hi guys

  I created a dynamic .bat file created inside java and copy it to a location and managed through fileObj.execute ();

  Example of

  -------------------

  var line1 = 'some code ";

  var line2 = 'some code ";

  myCode var = line 1 + line 2;

  
  

  var myFileC = new file

  myFileC.open ('w');

  myFileC.write (myCode);

  myFileC.copy ("some location\file.bat");

  myFileC.close ();

  Run the .bat file

  batFile var = new file ("of the location\file.bat");

  batFile.execute ();

  Now .bat file is successfully executed but the content of this file created bat shows up to extend in script by removing all my code above...

  I have to cancel to do back whenever I run and sometimes accidentally I saved it lose all the code.

  can someone help with this problem?

  Simply change it to this:

  var myFileC = new File ("some location\file.bat");

  myFileC.open ('w');

  myFileC.write (myCode);

  myFileC.close ();

• When I type in the address bar, yahoo search results appear. This just started happening, he showed the results of google search before. How can I get the results from google instead of yahoo?

  If I type "NBA" in the address bar, I get results from yahoo. I don't want the results of yahoo, I want Google results. This just started today. How can I get Google search results to show after typing in the address bar?

  1. Type of topic: config in the address bar and press on enter
  2. Accept the warning message that appears, you will be taken to a list of preferences
  3. Locate the preference keyword. URL, right-click on it and choose reset

  This will restore it to Google.

• Why the owner listed in the changing properties of file on our shared drive?

  I'm going to create a file from my computer (let's say is assigned the name "USERS/Person1") and save my company shared drive.  Let's say that others who have access to the shared drive can open the file from another computer, to save the changes to the file using their computer and even move the file to a different location in the same shared drive.  When I return to the properties of the file under 'Détails', sometimes 'owner' is still listed as "USERS/Person1" and sometimes he changed to someone else as "USERS/person2.

  I want to be able to search all the files I created showing the category of 'Owner' as a column in a window of browser windows and sorting so that all files of USERS/Person1 will appear together.  I can't be sure that I am looking for a complete list of the USERS/Person1 if there is a process that is reassign the owner without my knowledge.  I've experimented in opening a file that I know I created originally (which now showed "USERS/person2" as the "owner") and recording a change for her.  The name of the owner has not changed to USERS/person2.  I also know that the USERS/person2 does not manually go and change the permissions of file for that particular file attribute itself as the 'owner '.  I think it's a process making users who, unbeknownst to us, change the ownership of the file.  Yes - What causes a modification that is designated as the "owner" in the properties of the file?

  I actually thought about it myself...

  Files are sometimes the owner of the owner of the FOLDER.  So just create a new folder of computer USERS/Person1, move all the files in the old folder that has been created/corrupted to show the USERS/person2 as owner, and then the new folder with all the old files now in it will show USERS/Act.1 as the owner under file properties.  Keeps all the date created, modified files, other information properties the same (except for the new folder, of course, that has a new date of creation).  Thus, it keeps all the other info, but puts the appropriate property so you can finally pick up in person!

  Not a complete solution.  And still no response as to what process actually happen in the first place...  But at least now I can easily fix a set of files very quickly (without making attempts to open each file, make a change, re-register and then have even not reflect the new owner because the control record had the wrong user listed).
  Boo - Yes!

• Display the results in corrupted file?

  Hi team, support

  I have a long clip of 2 h in PP I send to return to the preset in 1080 p H.264 Youtube. The clip should take about 6 hours to render, and the file size should be about 13 GB in the end.

  I tried three times to make the video and while it will run for six hours in the SOUL, the resulting file will be approximately 64 k and corrupt.  I tried to export the clip directly from PP and while it takes the same amount of time to make, I noticed it will save video and audio clips (.mkv and .aac or similar?), once it reaches 100% it deletes the audio and video files and the resulting .mp4 has the same corrupt problem.

  I was able to export successfully to the clips in the past, including this, but one of an earlier version. I try to export my product over, but to no avail now. I tried to export the file to the PC and mac environments. Any ideas? Thank you.

  What version of Media Encoder do you use?  When your finished encoding, you see an error or warning in the status column?  You can view a log (file > see the log) and errors (file > show errors).  You see everything related to failure?

  In addition, make sure that your destination drive has enough space.  In order to generate a 13 GB file, it must be at least 26 GB of space for a treatment of file (13 GB for final output and another 13 GB for temporary treatment file). After all the processes are carried out, a temporary file is deleted.

• cfdirectory showing the folders but not files CF11

  I use the example code cfdirectory right of the Adobe still in CF11 site I can't get to show the files in the directory and all files.  Is this perhaps a security setting in CF11?

  The code is pretty basic:

  < cfdirectory directory = "D:/IIS" name = "dirQuery" action = "LIST" >

  <!-get an array of the names of directories. ->

  < cfset dirsArray = arraynew (1) >

  < cfset i = 1 >

  < cfloop query = "dirQuery" >

  < cfif dirQuery.type IS "dir" >

  < cfset dirsArray [i] = dirQuery.name >

  < cfset i = i + 1 >

  < / cfif >

  < / cfloop >

  < cfdump var = "#dirsArray #" >

  < br >

  <!-get-> all in a query of queries directory information.

  < cfquery dbtype = "query" name = "dirsOnly" >

  SELECT * from dirQuery

  WHERE TYPE = "Dir".

  < / cfquery >

  < cfdump var = "" #dirsOnly # ""

  Thank you!

  Gary

  ColdFusion is behaving as expected. By specifying 'dir' as type, tell you it to display only files. If you want to view the files, and then specify the type as "file".

• DGMGRL - dataguard CLI - at least for the coil of the orders of the results in a file?

  In the dataguard CLI (DGMGRL) is it possible to spool display of the results of commands in a file for printing later? For example, if I want to print the result of the following command:
  DGMGRL > show name-database detailed db;
  Thank you
  Tony

  It is possible

  dgmgrl | Tee /tmp/capture.log

  Another way would be to

  script /tmp/capture.log
  dmgrl

  Published by: sb92075 on October 20, 2009 12:53

• Export EPMA 'Import of the results' as a file?

  The Console log exports logs of deployment in the form of files, but the results "import" to import a profile cannot be displayed within the EPMA. Is there a way to export these 'import results' as a file?

  So I know this isn't the default functionality.

  See you soon

  John

• Populate drop-down list with the results of several drop-down lists

  Hi, I am creating a form where the results of two drop-down lists then would fill another drop-down list. I'm not new to javascript, but I'm new to using it in Acrobat, so while I found some answers to this: Drop-down list fill in multiple fields of text. I don't know where to implement this, if it is still the right thing, I'm looking for pipes for

  Oh and I use Acrobat Pro DC. Any help would be much appreciated!

  OK, you can create a function at the level of the document that is called in the Validate event of each of the two first drop down menus, something like:

  Function in JavaScript to the document level

  function updateDropdown() {}

  Get references to the drop-down menus of entry

  var F1 = getField ("DropdownList1");

  var F2 = getField ("DropdownList2");

  Refer to the output drop-down list

  F3 var = getField ("DropdownList3");

  Get the values of input field, as strings

  var s1 = event.target = f1? Event.value: f1.valueAsString;

  var s2 = event.target = f2? Event.value: f2.valueAsString;

  Fill the drop-down list of output with the elements, or deselect it if either input dropdown is 'empty' (single topic area)

  If (s1 = "" |) s2 === " ") {

  F3.clearItems ();

  } else {}

  F3.setItems (["", s1, s2]);

  }

  }

  In the two first downs Validate event, call this function like this:

  updateDropdown();

  You can of course name the function you want. More information about the properties and the methods used in the code are available in the Acrobat JavaScript documentation.

• Progress based on the list of the folder with multiple files in a folder

  I use the function list folder of LabVIEW and want to see progress, because it takes a long time (20 seconds) to load all the files in an array.

  How can I do this?

  See ListFolder exemple.jpg

  Regards Ben Arts

  Ben Arts wrote:

  I showed a small image is everything to do the job.

  There are about 3000 files and the file is a server.

  Well, who would certainly do, as much as you said that it is on a server, so a network drive.

  In this case, I was looking for a progress for the folder in the list to use it in an indicator of progress for the user.

  Unfortunately, there is no mechanism for it. Maybe you can organize the files so that you can get a list of them in 'chunks', based on a search pattern. Or perhaps you can organize them into folders so that you dynamically fill subfolders when a user wants to see what is inside.

  Cancellation: having 3000 + files in a folder is a bad way to orgranize files, especially on a server, as leading to a huge amount of e/s files and network I/O on the server load.

• After the upgrade from my bookmarks list shows the entries less than before; the indications you have search a Profiles folder that does not exist.

  After Update Firefox on all November 9, I lost the list of bookmarks that I had before and it could access it from my homepage. Now it does not appear there. When I followed the instructions on your mozillazine.org help page, it says to find a profile file that does not exist with this version.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file
  • http://KB.mozillazine.org/Lost_bookmarks