Listener does not start

Similar Questions

• listener does not start after upgrading clusterware

  Hello. RHEL 5, updated the clusterware 10.2.0.5 RAC to version 11.2.0.4 grid (database version is always 10). After the reboot, a node is OK, but on another auditor does not start. If trying to run manually, it starts with the error "the listener supports no services". After comparing with another node, it seems that 'bad' node uses old file listener.ora, which is now 0 bytes (probably was allowed during the upgrade):
  
  $lsnrctl start
  LSNRCTL for Linux: Version 10.2.0.5.0 - Production on 12 March 2014 09:37:16
  From /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: Please wait...
  ...
  System settings file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
  Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = rac - 2)(PORT=1521)))
  ...
  The listener supports no services ".

  where/u01/app... - is my home, the home grid is in / U02 oracle. On another node, listener starting grid House. I checked the Setup log and found no errors on the listener. What can I do to fix this?

  You need to check first, which is not running and why (. / crsctl res stat - you), a lot of resources are dependent on network net1. Start by watching clusterware alertlog and check the config network of the second node. If the basic config is very good, you can try with netca or command line (oifcfg, iflist,...).

• Database is started but the listener does not start

  Hello community,

  Over the weekend, a power outage took my Windows Server 2008 R2 down and my database in the same way.

  I started back on the database, but I'm having some trouble from the TNS LISTENER of my 11.0.2 database.

  I tried to start the service: OracleOraDb11g_home1TNSListener

  but I get the following error: OracleOraDb11g_home1TNSListener service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  LSNRCTL status gives me this:

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

  AMT-12541: TNS:no listener

  AMT-12560: TNS:protocol adapter error

  AMT-00511: no listener

  Windows 64-bit error: 2: no such file or directory

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = LIPCSATT.ireq.ca) (PORT = 1521)))

  AMT-12541: TNS:no listener

  AMT-12560: TNS:protocol adapter error

  AMT-00511: no listener

  Windows 64-bit error: 61: unknown error

  The departure of lsnrctl gives me this:

  Z:\ > lsnrctl start

  LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on August 6, 2013 07:55: 03

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  From tnslsnr: Please wait...

  Failed to start the service, error 0.

  AMT-12560: TNS:protocol adapter error

  Here are my ora files:

  sqlnet.ora # Network Configuration file: E:\app\da2803\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  # Generated by Oracle configuration tools.

  SQLNET. AUTHENTICATION_SERVICES = (NTS)

  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT, LDAP)

  tnsnames.ora # Network Configuration file: E:\app\da2803\product\11.2.0\dbhome_1\network\admin\tnsnames.ora

  # Generated by Oracle configuration tools.

  OROBEE =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = OROBEE)

  )

  )

  LISTENER_OROBEE =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

  listener.ora # Network Configuration file: E:\app\da2803\product\11.2.0\dbhome_1\network\admin\listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = E:\app\da2803\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:E:\app\da2803\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  )

  LOGGING_LISTENER = OFF

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = LIPCSATT.ireq.ca)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = E:\app\da2803

  TRACE_LEVEL_LISTENER = OFF

  my variables are:

  ALLUSERSPROFILE = C:\programdata

  APPDATA = C:\Users\db4626\AppData\Roaming

  BI_ORACLE_HOME = E:\app\Middleware_home\Oracle_BI1

  CUSTOMERNAME = PCS00427

  CommonProgramFiles = c: files

  CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files

  CommonProgramW6432 = c: files

  COMPUTERNAME = LIPCSATT

  ComSpec=C:\Windows\system32\cmd.exe

  DEFLOGDIR = C:\ProgramData\McAfee\DesktopProtection

  FP_NO_HOST_CHECK = NO

  GRAILS_HOME=C:\grails-2.0.0

  HOMEDRIVE = Z:

  HOMEPATH =.

  HOMESHARE = \\ireqhq\docireq\20032b\DB4626

  JAVA_HOME=C:\Progra~1\Java\jdk1.6.0_26

  LOCALAPPDATA = C:\Users\db4626\AppData\Local

  LOGONSERVER = \\WINDSOR

  NUMBER_OF_PROCESSORS = 4

  ORACLE_HOME=E:\app\da2803\product\11.2.0\dbhome_1

  ORACLE_SID = OROBEE

  OS = Windows_NT

  Path=E:\app\da2803\product\11.2.0\dbhome_1\BIN;D:\oracle\product\11.2.0\client_1

  \Bin; E:\app\Middleware_home\Oracle_BI1\bin; E:\app\Middleware_home\Oracle_BI1; C:\

  Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\System32\Windows

  PowerShell\v1.0\; C:\Program Files\TortoiseSVN\bin; C:\Progra~1\Java\jdk1.6.0_26\b

  in; C:\grails-2.0.0\Bin; C:\Program Files\TortoiseGit\bin; E:\app\Middleware_home\O

  racle_BI1\products\Essbase\EssbaseServer\bin; E:\app\Middleware_home\Oracle_BI1\b

  in; E:\app\Middleware_home\Oracle_BI1\opmn\bin; E:\app\Middleware_home\Oracle_BI1\

  opmn\lib; E:\app\Middleware_home\Oracle_BI1\perl\bin; C:\apps\FME\; E:\app\da2803\p

  roduct\11.2.0\dbhome_1\bin

  PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC

  PROCESSOR_ARCHITECTURE = AMD64

  PROCESSOR_IDENTIFIER = Intel64 family 6 model 44 Stepping 2 GenuineIntel

  PROCESSOR_LEVEL = 6

  PROCESSOR_REVISION = 2 C 02

  ProgramData = ProgramData

  ProgramFiles = c: Program Files

  ProgramFiles (x 86) = c: Program Files (x 86)

  ProgramW6432 = C:\Program Files

  PROMPT = $P$ G

  PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

  PUBLIC = C:\Users\Public

  SESSION = RDP - Tcp #0

  SystemDrive = C:

  SystemRoot = C:\Windows

  TEMP = C:\Users\db4626\AppData\Local\Temp\3

  TMP = C:\Users\db4626\AppData\Local\Temp\3

  TNS_ADMIN=E:\app\da2803\product\11.2.0\dbhome_1\NETWORK\ADMIN

  USERDNSDOMAIN = IREQ.CA

  USERDOMAIN = IREQHQ

  USER name = db4626

  USERPROFILE = C:\Users\db4626

  VSEDEFLOGDIR = C:\ProgramData\McAfee\DesktopProtection

  windir = C:\Windows

  _PENTAHO_JAVA = C:\PROGRA~2\Java\jre7\bin\javaw

  _PENTAHO_JAVA_HOME = C:\PROGRA~2\Java\jre7\bin\java

  Please HELP my COMMUNITY, I'm out of resources.

  Hi guys,.

  I found the problem.

  It was the system ORACLE_HOME variable which had 3 different paths and one of those who was referring an earlier instance of the db.

  After modification, I started the start lsnrctl successfully!

  Thx for your help everyone!

• Listener (and the database instance) does not start automatically: ORA-12514: TNS:listener does not currently of service requested in connect descriptor

  Hi all... I am a newbie with oracle database.,.

  I have the problem of monitoring:

  I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.

  I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.

  Installation-) before and during the hostname is localhost.

  (-) After the installation, I changed the host name in VMCentOS

  From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.

  When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:

  ORA-12514: TNS:listener is not currently of service requested in connect descriptor

  I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!

  Can someone tell me if, maybe, the problem is with the host has changed? ... and why?

  P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.

  Hello

  It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.

  When you install EA or there is no script that starts the database at startup.

  If you wish, you can create by yourself. For example search for instructions to Google how to create script.

  Kind regards

  Jari

• I thought that if I want my machine to boot faster I can move the fonts of the lokal disk documents folder so it does not start them all at the start

  original title: Fonts folder

  I thought that if I want my machine to boot faster, I can move the folder of fonts of the lokal disk to documents so it does not start them all at the start, and since I got them in the documents that I usually have no error saying that im their lack is this true? I have enough disk space hard as I don't care to remove them the reason why I want to do is if my machine starts as soon as possible thank you in advance!

  Don't listen to anyone who has you said that.
   
  The best way to speed up your computer is to eliminate startup items which are unnecessarily run at startup.  Go to start | Search and type msconfig and then see what is running at startup and what other services are underway then as well.  You can eliminate selectively and then evaluate how fast your computer runs.
   
  Steve
   
   
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I thought that if I want my machine to boot faster, I can move the folder of fonts of the lokal disk to documents so it does not start them all at the start, and since I got them in the documents that I usually have no error saying that im their lack is this true? I have enough disk space hard as I don't care to remove them the reason why I want to do is if my machine starts as soon as possible thank you in advance!

• FRM-10142 the http listener does not work on the name of the computer to the port 80

  Hello

  During the race, the oracle 12 c form a following error message

  FRM-10142 the http listener does not work on the name of the computer to port 80. Please start the receiver or check your preferences of runtime.

  Sandy

  First, you will need to check the SST is running.

  go to admin server url in your browser, click on the target icon that is left top of your admin home go to the http server and then start your ohs1.

  and open your generator of forms go to the updated runtime default url like e.g. OSH, you can find your url such as http://localhost:7777 or http://localhost:7779.

  your full url looks like this format http://localhost:7777/forms/frmservlet or http://localhost:7779/forms/frmservlet.

  Localhost can be your default ip 127.0.0.1 or any static ip 192.0.0.10 address in this format.

• frm-10142 http listener does not

  Hi all

  I am unable to run any form of generator of forms, I get the error frm-10142 (http listener does not)

  tried different ports (8888, 9001, 7001)

  When I connect to the console like this:

  http://127.0.0.1:7001 / console

  and click on deployments (11.1.2) formsapp is listed with the new State

  When I click on environment = > servers the following is listed:

  Name State listening Port

  AdminServer (admin) being RUN 7001

  STOP WLS_FORMS 9001

  STOP WLS_REPORTS 9002

  When I connect to the EM with http://127.0.0.1:7001 / em

  and under Farm_ClassicDomain, I open the forms node, and then click Forms

  then, in the form of deployments, it is empty

  the weblogic server is running

  OS: 64-bit windows 7

  forms: 11.1.2.2.0 64-bit

  WLS 10.3.6

  could it be caused by a recent update for java 8? (java version = 1.8.0_60)

  any ideas?

  KR

  Martin

  If you want to start the console servers, nodemanager must be running.

  Go to you $DOMAIN_HOME/bin folder and user batch file to start servers:

  StartManagedWebLogic.bat WLS_FORMS

  You will be asked for weblogic credential.

  Last output message should be something like this: "server started in OPERATION."

  Then you can try to access the forms.

  Concerning

• 12 c on the repository server management agent does not start due to a failure of the system

  My environment architecture for 12 c Cloud Control (used for the purpose of personal practice) can be explained as follows:

  @DBSERVER: (OEL6.5, x 86-64)

  -12 c Enterprise Manager Cloud Control (EMCC)

  -Database 11.2.0.4 which acts as a repository for 12 c EMCC

  Monitored host is on a virtual machine (VM12) which is currently in the DBSERVER:

  VM12: (OEL6.5, x 86-64)

  -12 c Management Agent which monitors host and database (12.1.0.1)

  The server worked fine for months until recently when the computer has restarted abruptly. Abrupt restart has occurred several times in the past, but this time, he had a problem when restarting. The DBSERVER when a startup starts the SGC and the AGENT. WHO starts perfectly, but the AGENT does not start. On trying to start the agent, it displays the following error message:

  [orcl11204g@dbserver bin] $. / emctl start agent

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Starting Agent... failed.

  Manager of target failed to startup: targets.xml was rejected: loaded with a token incorrect agent

  See emctl.log and emagent.nohup in: / home/u01/oemrel3/agent/agent_inst/sysman/log

  [orcl11204g@dbserver bin] $

  The targets.xml file contains the following information, which do not seem to be of any help:

  [orcl11204g@dbserver emd] $ cat targets.xml

  <? XML version = "1.0"? >

  <>targets

  < / objectives >

  [orcl11204g@dbserver emd] $

  Anyone can provide assistance in such circumstances?

  The DBSERVER repository database, the auditor and the who are running, while the agent is down. VM12, listener and agent database is running. Is there another file that should be checked for more information?

  --> $/ AGENT_INST/bin/emctl stop agent

  If the agent does not stop is free then kill all the background process agent first grepping for agent perl and java process only

  --> Move your existing target.xml file

  MV target.xml target.xml.old

  --> Create an empty file targets.xml under/AGENT_INST/sysman/MDTs with the below content

  --> Start the agent of

  $AGENT_INST/bin/emctl start agent

  That starts agent but without all the targets in targets.xml

  To the discovery of targets saw agent console resynchronization

  Concerning

  Krishnan

• the inventory of VMware service does not start, the wrong function, bad sql server port

  I've migrated vcenter SQL database to a new server after this KB

  https://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 7960893

  but now most of the vcenter services does not start cause of according to the inventory service.  I see service log of inventory which is the problem, it tries to connect to SQL Server by default, 1433 port, but my SQL server instance is listening on a different fixed port, I don't want to change.  Where can I configure the inventory service we another port of SQL Server?  According to a KB related to the above, it is possible to do

  https://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2033516

  but unfortunately I have vcenter 6 and the instructions above do not seem to apply, I can't even find ssocli, the mentioned folder structure does not exist on my installation

  
  Thank you.

  I solved this.  Despite what has been reported in the newspaper the issue was not the port.  The new database is a named instance, the connection string for vcdb.properties, he entered as the server name = hostname\instancename in fact, it is necessary to use two slashes return hostname\\instancename :-/

• ORA - 12514:TNS:listener does not work

  Hi all
  
  
  My Version of DB: 10.2.0
  
  Operating system: Solaris
  
  
  I just stop the database and when try to restart Pb it gives me error like:
  
  ORA - 12514:TNS:listener does not work
  
  When I check the entry from the file tnsnames.ora DB is in the list
  
  but when I do
  
  lsnrctl status
  
  It will not display no services of db which is orcl
  
  can someone help me

  Vikas Kohli wrote:

  DB is now

  one more thing to ask

  Please do not put more than one topic or 'thing' in each thread that is start a new separate discussion thread / topic / problem etc.

  When you try to raise the hot backup rman I get below error:

  RMAN topics, please use the dedicated forum: {forum: id = 74}.

• ORA-12514 TNS: Listener does not currently of service required

  Hi all
  
  
  I created a thread here only three days ago on the question above:
  
  ORA-12514 TNS: Listener does not currently of service required
  
  and I ended install oracle again this time around just after 2 days I'm getting the same problem again. I have not yet published that any same file not open it not even anywhere near her. Can anyone tell me the reason?
  
  Thank you and best regards,
  
  Lucky aka Lastw0nd3r
  
  Published by: lastw0nd3r on August 5, 2010 07:24

  SQL NET should now work for you.*
  If so, please mark as ANSWER

  but where was I wrong?

  the database is not started so the listener did not know the DB Service

• ORA-12505 TNS Listener does not currently in SID

  Hello
  When I try to connect to Oracle Sql developer, error "ORA-12505 TNS Listener does not currently of SID given in connect descriptor". ""
  I use 11 GR 1 material on Windows XPSP2 platform. But several sql works very well.
  Thank you
  
  Published by: user12222356 on April 11, 2010 07:20

  user12222356 wrote:
  This time the Sql developer is connected successfully. But there is not a question of being happy because what happens frequently. Sometimes is connected while sometimes the connection refused... All, it seems, is that SQL Developer connection to the Oracle server depends on luck.
  Is there any solution to get rid of this problem?

  It's a matter of timing.

  First thing that should be launched is the listener. Who should be started on boot. For a laptop or another machine which uses the DHCP protocol, the listener must be configured to talk to the loopback adapter.

  Then the database should be started to talk to listening on the port of sight to the listener - it is applied either with the "LOCAL_LISTENER" database being left to null (for the default listener on 1521). This can be checked by "Lsnrctl status" showing the instance of database such as saved and available.

  Then the SQLDeveloper can start up, pointing to the same host, port, and service/instance, as shown in "lsnrctl status".

• ColdFusion MX 6.1 does not start

  My Coldfusion MX 6.1 does not start all of a sudden. He had been on for 2 months. When the server hung Solaris 5.9 (unknown reason) redemarrees operations server and coldfusion will not return to the top. Can't get to the admin or anything like that.
  In the cfserver.log, I find the messages:
  
  From Macromedia JRun 4 (Build 75991), default server
  09/04 16:20:08 WARNING Unable to open /usr/local/cfusion/runtime/lib/license.properties
  09/04 16:20:13 info JRun Naming Service listening on *: 2901
  09/04 16:20:19 No info JDBC data sources have been configured for this server (see jrun - resources.xml)
  Running JRun4 on...
  Start ColdFusion services.
  -Start logging...
  1 [main] INFO coldfusion.server - start logging...
  09/04 16:20:33 error RuntimeException thrown at the beginning of operation
  [1] coldfusion.server.ServiceFactory$ ServiceNotAvailableException: Runtime service is not available.
  at coldfusion.server.ServiceFactory.getRuntimeService(ServiceFactory.java:107)
  at coldfusion.server.CFService.start(CFService.java:334)
  at coldfusion.server.jrun4.NeoService.start(NeoService.java:47)
  
  
  I can also find in exception log the following:
  
  «"Fatal", "hand", "04/09/07", "13: 57:09 «,»»
  java.lang.NullPointerException
  at coldfusion.license.Decoder.decodeSerialNumber(Decoder.java:78)
  at coldfusion.license.CF60Decoder.decode(CF60Decoder.java:223)
  at coldfusion.license.CF60Decoder.getProductInfo(CF60Decoder.java:169)
  at coldfusion.license.LicenseServiceImpl.init(LicenseServiceImpl.java:536)
  at coldfusion.license.LicenseServiceImpl.load(LicenseServiceImpl.java:206)
  at coldfusion.server.ServiceBase.start(ServiceBase.java:38)
  
  
  
  How can I get a basic Coldfusion upwards so that I can use administrator to review my configuration?

  The article is right. I've restored backups license.properties and Coldfusion started again.
  Thank you!

• DB does not start

  Hello
  10 g R2 on a Win 2003 server, when I start the windows service to start my DB, DB does not start and I in the Win services event log:
  
  Audit trail: ACTION: DATABASE 'START-UP' USER: ' / ' PRIVILEGE: SYSDBA CLIENT USER: AUTHORITY NT\SYSTEM CLIENT terminal SERVER: not available STATUS: 0.
  
  When I try to connect to sqlplus I:
  
  sqlplus sys/***@DB as sysdba
  ORA-12518: listener could not hand off client connection
  
  
  But I have:
  lsnrctl status
  
  'DB' service has 1 instance (s).
  'DB', status UNKNOWN instance, has 1 operation for this service...
  
  Any idea?
  It is urgent.
  Thank you.

  user522961 wrote:
  Hello
  I put this in listener.ora:
  DIRECT_HANDOFF_TTC_LISTENER = OFF
  and restarted. But still the same problem:

  C:\>set ORACLE_SID=MYDB
  
  C:\>sqlplus / as sysdba
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Tue Nov 11 10:44:01 2008
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  

  Ok. This connection has not used the listener, and then you have a 'connection', but to an "idle instance." In other words, the database is not started. What happens when you return to this point and you deliver 'start '?

  But:

  sqlplus sys/****@mydb as sysdba

  
  SQL*Plus: Release 10.2.0.1.0 - Production on Tue Nov 11 10:32:38 2008
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  ERROR:
  ORA-12518: TNS:listener could not hand off client connection
  

  This connection uses the listener, but the listener could not hand off the connection due to the fact that the database itself is not started, as evidenced by your previous connection.

  As I stated in an earlier reply. Forget about the listener for now. Your database is not started, so the listener is irrelevant.

  It can not be a problem of number of process (>150) because the database is not started.

  That's right. The database is not started. You must solve that first.


  Any idea ? Thanks.

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)